How to create info area for process chains?

Hi,
If I understand your question clearly, you want to assign display componets.
once you have created you chain you assign the components by clicking CTRL+F11
Regards,
Namrata

Similar Messages

How to create a job for proces chain

Hi All,
I have a process chain that gets a trigger (.txt Trigger file) in AL11 inbound foulder.....
we will check for the same trigger in AL11...if it is available..we will trigger the chain using sm64 ...
now, i want to create a job for the same and schedule it automatically everyday.....
Any help will be appreciated....

Dear Sam2027,
you can set a "recurrence" within the schedule options where you can decide not only the day but also the time.
The recurrence can also be use in conjunction with your trigger .txt (which I believe it's a file event): in this case both of them need to be satisfied in order for your schedule to run.
I hope this will help.
Regards,
Samanta

How to find triggering job for Process chain

Hi,
I have a process chain and its triggering by some other system using an event.
I want to know how to find which ystem is triggering this job means process chain and on what basis it is starting?
I have an event for this process chain and also FM : BP_EVENT_RAISE. So how to find the with those details?
Thanks,
Phani

HI,
some other system means either dev, qas, prd?
for every process in a process chain there is a chain id which is same as the name of your chain,
for every chain id there exist some log ids , this both information you can find from the standard table RSPCLOGCHAIN
From this log id you can find the status of the process from table RSPCPROCESSLOG.
here u will find the status of your process whether is has been completed successfully or ended with errors.
Thanks,
Phani.

Need a table for process chains of when these are scheduled!!

Hi,
I had like to have list of all the process chains and their schedules of how often these are loaded and whether been triggered by event or directly scheduled. If periodically scheduled then the period----
is there any table which can have the information as i said??
Raj

Hi....
process chain tables
RSPC_BUFFER Shared Buffer for Processes (Esp. Customer
RSPC_MONITOR Monitor individual process chains
RSPCABAPASYNC Logging for ABAP Processes(Synchronously a
RSPCCATEGORY Process Type Categories
RSPCCATEGORYT Texts for Category
RSPCCHAIN Process chain
RSPCCHAINATTR Attributes for a Process Chain
RSPCCHAINEVENTS Multiple Events with Process Chains
RSPCCHAINT Texts for Chain
RSPCCOMMANDLOG System Command Execution Logs (Process Cha
RSPCENQUEUE Dummy Table for Runtime Locks of a Process
RSPCEXOR Excluding Or: Log Table
RSPCINFO Special Values for Communication between P
RSPCINFOT Special Values for Communication between P
RSPCINSTANCE Generic Instance Storage
RSPCINSTANCET Texts for Generic Instance-Storage
RSPCLOGCHAIN Cross-Table Log ID / Chain ID
RSPCLOGCROSS Cross-Table Log ID Old / Log ID New
RSPCLOGS Application Logs for the Process Chains (G
RSPCPROCESSLOG Logs for the Chain Runs
RSPCRUNVARIABLES Variables for Process Chains for Runtime
RSPCTRIGGER Variants for the Trigger Processes
RSPCTRIGGERT Texts for the Trigger Variants
RSPCTYPESDEP Dependencies for Processes
RSPCTYPESPROC Attributes of BW processes (RSSM)
RSPCVARIANT Generic Variant-Storage
RSPCVARIANTATTR Attributes of a Process Variant
RSPCVARIANTT Texts for Generic Variant Storage
Among all these tables I think.......
RSPCCHAINATTR Attributes for a Process Chain
RSPCCHAINEVENTS Multiple Events with Process
Chains
RSPCPROCESSLOG Logs for the Chain Runs .........can help you.......
Regards,
Debjani........
Edited by: Debjani Mukherjee on Oct 21, 2008 1:32 PM

BI admin cockpit for process chains

Hi
Currently we are monitoring process chains(Daily data loads) on a daily basis ,Business users want the statstics of the process chains to be implemented in cockpits via BI admin cockpit( BI 7 version) .can some one tell how to implement BI admin cockpit for process chains.
If some one has some specific documents can you please mail then to my email: [email protected]
Thanks
Bhavana

Hi,
You need to install Business Content
Front End and OLAP Statistics (Aggregated) ( 0TCT_C01, 0TCT_VC01)
0TCT_C01
InfoCube 0TCT_C01 is a standard InfoCube that contains front end and query runtime statistics (aggregated).
This InfoCube is used for monitors that display all the aggregated values of front end and query runtime for BI applications, BI application objects, and InfoProviders on the portal.
0TCT_VC01
InfoCube 0TCT_VC01 is a Virtual Provider that contains front end and query runtime statistics (aggregated).
This InfoCube is used for monitors that display all the aggregated values of front end and query runtime for BI applications, BI application objects, and InfoProviders on the portal.
Front End and OLAP Statistics (Details) (0TCT_C02, 0TCT_VC02)
0TCT_C02
InfoCube 0TCT_C02 is a standard InfoCube that contains detail values for front end and query runtime statistics.
This InfoCube is used for monitors that display detail values for the query runtime object.
0TCT_VC02
InfoCube 0TCT_VC02 is a Virtual Provider that contains front end and query runtime statistics (details).
Data Manager Statistics (Details) (0TCT_C03, 0TCT_VC03)
0TCT_C03
InfoCube 0TCT_C03 is a standard InfoCube that contains data manager statistics (details).
This InfoCube is used for monitors that display all the detail values of data manager statistics for the query runtime object on the portal.
0TCT_VC03
InfoCube 0TCT_VC03 is a Virtual Provider that contains data manager statistics (details).
This InfoCube is used for monitors that display all the detail values of data manager statistics for the query runtime object on the portal.
DTP Statistics (0TCT_C22, 0TCT_VC22)
0TCT_C22
The InfoCube 0TCT_C22 is a Standard InfoCube that contains statistics for data transfer processes that are executed individually or in process chains.
This InfoCube is used for all the monitors that display the DTP statistics on the portal.
0TCT_VC22
The InfoCube 0TCT_VC22 is a Virtual Provider that contains statistics for data transfer processes that are executed individually or in process chains.
This InfoCube is used for all the monitors that display the DTP statistics on the portal.
InfoPackage Statistics (0TCT_C23, 0TCT_VC23)
0TCT_VC23
The InfoCube 0TCT_VC23 is a Virtual Provider that contains InfoPackage statistics or detailed information about the InfoPackage that are executed individually or in process chains.
0TCT_C23
The InfoCube 0TCT_C23 is a Standard InfoCube that contains InfoPackage statistics or detailed information about InfoPackages that are executed individually or within a process chain.
Process Statistics (0TCT_VC21, 0TCT_C21)
0TCT_VC21
The InfoCube 0TCT_VC21 is a Virtual Provider that contains process chain statistics or detailed information about process chains and process types that are successfully executed.
This InfoCube is used for all the monitors that display detailed information about process chain statistics and process statistics on the portal.
0TCT_C21
The InfoCube 0TCT_C21 is a Standard InfoCube that contains process statistics or details of processes that are executed individually or in process chains.
This InfoCube is used for monitors that display all the process runtimes on the portal.
Process Status (0TCT_VC12)
The InfoCube 0TCT_VC12 is a Virtual Provider that specifies the status of the process chain and detailed information about the process status.
BI Object Request Status (0TCT_VC11)
The InfoCube 0TCT_VC11 is a Virtual Provider that provides detailed information about requests in all the Data Targets and Master Data in characteristics.
Content Master Data
The process chain 0TCT_MD_C_FULL_P01 is used to load the content master data.
(e.g: Process Chain, Process Status, Web template, Process variant, Web item)
System Master Data
The process chain 0TCT_MD_S_FULL_P01 is used to load system master data.
e.g:BW Object type
Data Load Statistics Delta
The process chain 0TCT_C2_DELTA_P01 is used to load delta data for data load statistics.
The following processes are included in the process chain:
Process                         Target
0TCT_DS22_DELTA_DATAMART (B71)               DTP Statistics [0TCT_C22]
0TCT_DS23_DELTA_DATAMART (B71)              Info Package Statistics [0TCT_C23]
0TCT_DS21_DELTA_DATAMART (B71)              Process Statistics [0TCT_C21]
Query Runtime Statistics Delta
The process chain 0TCT_C0_DELTA_P01 is used to load delta data for query runtime statistics.
The following processes are included in the process chain:
Process                                   Target
0TCT_DS01_DELTA_DATAMART               Front end and OLAP statistics (aggregated) [ 0TCT_C01]
0TCT_DS02_DELTA_DATAMART             Front end and OLAP statistics (details) [0TCT_C02]
0TCT_DS03_DELTA_DATAMART              Data manager statistics (details) [0TCT_C03]

Any log for process chain changes

Dear All,
I have around 95 process chains, during the monthends & beginings i have done some changes to some of the process chains.
If i want to have a quick look at only changes to those pc's where can i get the info.
To be frank, practically its not possible to go each and every pc and goolge them.
Can you please guide me on how to .
Rgds

Go to SE11 and search with
RSPC*
You will find all the tables concerned with process chains.
RSPC_ALERT_CAT                 Alert Categories for Process Types
RSPC_BUFFER                    Shared Buffer for Processes (Esp. C
RSPC_MONITOR                   Monitor individual process chains
RSPCABAPASYNC                  Logging for ABAP Processes(Synchron
RSPCCATEGORY                   Process Type Categories
RSPCCATEGORYT                  Texts for Category
RSPCCHAIN                      Process chain
RSPCCHAINATTR                  Attributes for a Process Chain
RSPCCHAINEVENTS                Multiple Events with Process Chains
RSPCCHAINT                     Texts for Chain
RSPCCOMMANDLOG                 System Command Execution Logs (Proc
RSPCCONTENTSTART               Process Chains To Be Scheduled Auto
RSPCENQUEUE                    Dummy Table for Runtime Locks of a
RSPCEXOR                       Excluding Or: Log Table
RSPCINFO                       Special Values for Communication be
RSPCINFOT                      Special Values for Communication be
RSPCINSTANCE                   Generic Instance Storage
RSPCINSTANCET                  Texts for Generic Instance-Storage
RSPCINTERRUPT                  Variants for the Trigger Processes
RSPCINTERRUPTLOG               Table for Interrupt Processes
RSPCINTERRUPTT                 Texts for Interrupt Variants
RSPCLOGCHAIN                   Cross-Table Log ID / Chain ID
RSPCLOGCROSS                   Cross-Table Log ID Old / Log ID New
RSPCLOGS                       Application Logs for the Process Ch
RSPCPROCESSLOG                 Logs for the Chain Runs
RSPCRUNVARIABLES               Variables for Process Chains for Ru
The information you are looking for is available in RSPCCHAIN i belive.
Regards,
rocks

Cancel the scheduled jobs for process chains - urgent

Hi,
How do I cancel the scheduled jobs for process chains which are going to run tonight.
thanks,
Radha

Hello,
Go into transaction code RSPC and then select the particular process chain by going into the edit mode and in the menu...
Look for Execution --> Remove from Schedule.
Let me know if that answered your question.
Thanks
Dharma.

How to create new structure for SOP?

How to create new structure for SOP? and transfer data for long term planning?

hi dear
For SOP there are two types
1. Standard SOP : this the standard SOP configured by SAP consider the Level by Level planning and planning done for product group .
2. Flexible planning SOP: this option is given, so that Rough planning/SOP planning can be done as per the client requirement.e.g planning structure can be sales orgn., distribution channel, division, plant, material
For configuring the flexible planning SOP follow steps
1. Define info structure in IMG
where u define the characteristic and Key field
2. Set parameters for info structures and key figures
Sales & Operations Planning >Master Data>Set parameters for info structures and key figures
where u define Planning method
Consistent planning
Level-by-level planning
Delta planning
and aggregation type
1. Average calculated
2. Total created
3. No aggregation
3. create Planning type with reference to info structure
Regards
Suresh

How to create an extension for generated type idoc

Hi all,
Can u please look into this
How to create an extension for generated type idoc ? for example Idoc type BATMAS02

Enter transaction WE30 (ALE->Extension-> IDOC types->Maintain Idoc type)
- Type in your name of the extended IDOC type (usually starting with 'Z') and click on the Basic IDoc type, click the create icon.
- Click on Create new and enter a description and press enter.
- Click on ZIDOCTYPE01 and then on the Create icon.
- Enter ZIDOCTYPE as the segment type, click on Segment Editor.
- Enter a description for your segment type and create.
- Enter a description for your segment, enter each field required in your IDoc and press enter to validate.
- Save and generate, press back
- To release the segment choose Goto, Release from the menu.
- Check the box on the line of your segment.
- Save, back and enter.
- Your Idoc type structure should be displayed with your new segment.
- Save and back.
- To release the Idoc type choose Extras, Release type from the menu and Yes.
ALE FUNCTION MODULE ENHANCEMENTS
Having extended the IDOC type to contain additional fields for an inbound or outbound application, you now want to enhance ALE function modules for populating the additional segment on the outbound or applying the additional segment data on the inbound application.
The core working code for ALE processes for a given application area is always encapsulated in ABAP/4 function modules. These function modules are associated with such control information as message types and process codes. So the ALE process checks this control information and derives the name of the function module to invoke for that particular IDOC processing from certain database tables. These function modules contain objects known as customer functions, which can be considered SAP Enhanced user exits. A function module is called at a particular point during the processing of the main program or function module, and it can be used to influence data processing at that point by adding code to the customer function. The customer function behaves like a normal function module and has import and export parameters, tables (internal tables) statement, and exception processing. Unlike a conventional user exit, customer functions give you the ability to modify only data available to you by the function moduleâs parameters and internal tables. While most ALE/EDI function modules are supported by customer functions, there are ALE/EDI processes that still use conventional user exits. There are a few ways to determine which function module to enhance for a given message type/process code:
For master data distribution, from SALE go to Extensions -> Master data distribution -> Setup additional data for message types. Search for message type DEBMAS in this example. You see an entry for DEBMAS associated with function module MASTERIDOC_CREATE_SMD_DEBMAS. This data is stored on table TBDME. The function module names for all master data message types follow this pattern: MASTERIDOC_CREATE_SMD_messagetype. This function module calls another function module of name MASTERIDOC_CREATE_DEBMAS or MASTERIDOC_CREATE_messagetype. Search for the words customer function, and you find several hits that can be used to add code to the function module.
From WEDI got to Control -> Inbound process codes -> Inbound with ALE service -> Processing by function module (transaction WE42), or from WEDI go to Control -> Outbound process codes -> Outbound with ALE service -> With function module (transaction WE41). There will be function modules associated with the process codes. For inbound, the function modules usually follow this pattern: IDOC_INPUT_messagetype: for example, IDOC_INPUT_CHRMAS for inbound characteristics master.
Use transaction WE57 or from WEDI go to Development -> Message/Application Object. The entries list the function module, Business Object, message type, and IDOC type that are used for inbound ALE/EDI interfaces.
Customer functions are not specific only to ALE and EDI but also to all programs/modules in SAP R/3. Customer function is a SAP enhancement component; the other two types are menu and screen enhancements.
All customer function exits are maintained in SAP enhancements and are found by using transaction SMOD. After executing transaction SMOD, pull down (F4) on the enhancement name field, and execute again. This provides you with a list of all SAP enhancements available. SAP enhancements are grouped by development class pertaining to an application area. Choose Application development R/3 SD master data distribution for development class VSV to lead to a screen that lists VSV00001 as an enhancement (see Figure 5). Press Component +/- to display its function exit components. There are four possible components listed, all of which are function exits (and are function modules) that are called from the ALE function modules in the form Call Customer Function Î001â. This is a special occurrence of the ABAP statement Call. Go to item Exit_SAPLVV01_ 001, which you need to enhance for the Customer Master outbound example of an IDOC extension. In the ALE-function module MASTERIDOC_CREATE_DEBMAS, the statement CALL Customer Function 001 is translated in the background to call component EXIT_SAPLVV01_001. Although this function exit can be edited using transaction SE37, you will use a simpler approach.
When you use SAP enhancements and their components, you manage them with an SAP object known as a project, which is like an envelope containing the selected enhancements and their components. A project can be used to control the execution of components and to transport them to other clients and instances in SAP. Basically, the process involves creating a project, including enhancements and components that are to be enhanced, editing the components, and then activating the project. The following process creates a project for our example Customer Master IDOC extension:
Execute transaction CMOD.
Enter name of project, say CSTMAST1.
Click on Create.
Enter a description of the project.
Save.
Click on SAP Enhancements.
Enter VSV00001 for Enhancement.
Save.
Once youâve created the project, edit the function exit components and activate the project. Remember that the code in the function exit enhancement will execute only if the project is activated. In fact, this is a convenient SAP enhancements feature, whereby the work in progress (developing code in the customer function) will not affect users of that application. When the code is completed, the project can be activated so the enhanced functionality takes effect. It can also be deactivated for maintenance.
As mentioned earlier, customer functions (function exits) are embedded in ALE function modules and can be used to influence the creation and modification of IDOC data on an outbound application or to post additional or modified IDOC data to an inbound R/3 application. Function exits are similar to regular function modules, with import/export parameters, tables (internal tables), and exceptions.
The two important factors to consider while developing the customer function are:
1. The point in the ALE function module where the function exit occurs
2. The data made available by the customer function that can be modified or posted to the R/3 application, based on the direction.
Because some function modules have several customer functions, it is critical to choose the function exit best suited for that particular enhancement. Do not attempt to perform activities that the function exit is not designed for. The importance of this point is illustrated by the following description of enhancing function modules for outbound and inbound ALE interfaces.
Outbound interfaces. In an outbound ALE interface you use function exits (customer functions) to populate additional segments created by an IDOC extension or to modify the existing IDOC data segments as per business requirements. Previously, you identified that enhancement VSV00001 has a component EXIT_SAPLVV01_001 (function exit), which can be used for populating the additional data segment Z1SADRX that you created in the IDOC extension ZDEBMASX (IDOC type ZDEBMASZ, based on Basic IDOC type DEBMAS02). You also learned that the ALE function module that calls this function exit is MASTERIDOC_CREATE_DEBMAS, which has a statement Call Customer Function 001.
Browse the function module MASTERIDOC_CREATE_DEBMAS using transaction SE37. You will find that this customer function is invoked for every segment of IDOC type DEBMAS02. In fact, the function exit is called soon after the creation of an existing segment has been populated with data and appended to the IDOC data table (internal table). Also, the function exit is exporting the message type, IDOC type, and the segment name and is importing the IDOC extension type. It is also passing the IDOC data internal table. This indicates that the ALE function module is allowing you to populate additional segments for every existing segment and modify the existing segmentâs data.
Letâs write ABAP/4 code to accomplish the task of populating IDOC segment Z1SADRX with a contact personâs business address:
From SE37, display function module MASTERIDOC_CREATE_ DEBMAS.
Find Customer Function 001.
Double-click on 001.
The function EXIT_SAPLVV01_001 will be displayed.
Double-click on INCLUDE ZXVSVU01.
You will be asked to create a new include object. Proceed as desired.
Enter code (as in Listing 1).
Be sure to perform a main program check (Function Module -> Check -> main program) and extended program check (Function module -> Check -> Extended check).
Now that you have extended the IDOC and enhanced the ALE function module based on the requirements for the contact personâs business address on the Customer Master, letâs test the interface. You should create a logical system and define a port for this interface. You should also configure the Customer Distribution Model to indicate that message type DEBMAS is being distributed to this logical system. The only difference in configuration between a regular outbound ALE interface and an enhanced one is the partner profile definition. While maintaining the outbound parameters of the partner profile, make sure the IDOC type is ZDEBMASZ. The fields for Basic IDOC type and extension type are automatically populated with DEBMAS02 and ZDEBMASX, respectively.
To maintain the contact personâs business address of a customer:
Use transaction BD12 or from BALE go to Master Data ->Customer -> Send and send that Customer Master record by executing the transaction after filling in the relevant fields such as customer number, message type, and logical system.
Use transaction WE02 or WE05 to verify the IDOC created. You should see the new segment Z1SADRX populated with the correct data.
With SAP releases below 4.5B, you cannot capture changes to business address through change pointers because a change document object is not available for capturing business address changes, and also earlier releases have not been configured to write change documents for a contact personâs business address. If you would like this functionality, you can either create change document objects, generate function modules to create change documents, and perform ALE configuration to tie it in, or make a cosmetic change to the contact person screen data while changing the contact personâs business address so that it gets captured as a change to the Customer Master. Subsequently, the ALE enhancement that you performed captures the contact personâs business address.
Inbound interfaces. The process for enhancing inbound ALE interfaces is similar for outbound, with a few exceptions; specifically in the coding of customer functions (function exits) for the ALE/EDI function modules.
The first step is to create an IDOC extension for the specific Basic IDOC type by adding new segments at the appropriate hierarchy level: that is, associated to the relevant existing segment. Populate the data fields on the new segments with application data by the translator or external system/program before importing them into the R/3 System. Then, find the ALE function module that is invoked by the inbound processing. By browsing through the code or reading the documentation on the function exit enhancements using the SMOD transaction, identify the function exit in which you should place your code. The technique used in the code to post the additional or modified IDOC data to the application can vary based on the application rules and requirements, the data available at that point in processing, and the application function modules available to update the application tables. It is important to search first for application modules that process the data and see if they can be called within the function exit. If the additional data in the extended segments in specific to a custom table or resides in nonkey fields of a single or small set of tables, you may be able to update it directly by SQL statements in the function exit. This approach should be carefully evaluated and is certainly not highly recommended.
Another option is to use Call Transaction from within the function exit to process the additional data. For example, in the case of message type WMMBXY for inbound goods movements from a warehouse management system, the standard interface creates batches for materials, but does not update its characteristics. In such a case, you can use Call Transaction MSC1 to create the batch and assign characteristic values to it from within the function exit provided.
regards,
srinivas

How to create a macro for a planning type in MC8b transaction

Hi,
I am presently working for a product allocation demand, which have a information structiure with characteristic and key field.
the characteristic are production allocation quantity, incoming order quantity, and open order quantity.
i have created a planning type in which the data updation takes from the excel file to the planning type in mc95.
but i need to create a macro for this planning type .
can any body give the details information how to create a Macro for a planning type.
Thanks and regards
GopalKrishna

Dear Gopal
May be the link would be helpful to you.
[Planning Types and Macros|http://help.sap.com/saphelp_46c/helpdata/en/a5/631cc443a211d189410000e829fbbd/frameset.htm]
Drill down the left tab once you opened the link, for more information.
Thanks
G. Lakshmipathi

Info Package in Process Chain taking long time

Dear All,
Info Package in Process Chain having 0 records is taking 1 hr 5 mins to complete. Time out time is set to 10 mins.
Does any one of you know the reason why it is happening like this?
Regards.

When the info package status turns to green : final message is :
No data available
Diagnosis
The data request was a full update.
In this case, the corresponding table in the source system does not
contain any data.
System Response
Info IDoc received with status 8.
Procedure
Check the data basis in the source system.
Diagnosis
     The data request was a full update.
     o   In this case, the corresponding tab
             contain any data.
     o   System Response
             Info IDoc received with status
             Procedure
Check the data basis in the source system.
Analysis
========
No data available in the source system for this selection
No further action necessary
When the status was red, I checked BD87 and SM58 and there were no entries.
The corresponding job in sm37 took 869 seconds to complete. Below was the job Log.
Job started
DATASOURCE = 0CO_PC_02
Call customer enhancement BW_BTE_CALL_BW204010_E (BTE) with 0 records
Result of customer enhancement: 0 records
Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 0 records
Result of customer enhancement: 0 records
IDOC: Info IDoc 2, IDoc No. 1345319, Duration 00:00:00
IDoc: Start = 24.10.2011 18:29:54, End = 24.10.2011 18:29:54
Synchronized transmission of info IDoc 3 (0 parallel tasks)
IDOC: Info IDoc 3, IDoc No. 1345330, Duration 00:00:00
IDoc: Start = 24.10.2011 18:44:18, End = 24.10.2011 18:44:18
Job finished.
PLease help.
Regards.

How to create one checksum for 264 vis

Hi,
How to create "one Checksum" for 264 Vis.These 264 Vis are Interlinked if i change code for any .vi the checksum Should be update.This checksum is shown on the main window.
Regards
Ravindranath
Solved!
Go to Solution.

Here's a slightly simplified version (saved in 8.6). There's no need for the Get/Set File Position. The file position is already being incremented with the read.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
Attachments:
Multiple File MD5 Checksum (Version 8.6).vi ‏23 KB

How to create greater_or_equal condition for file_io storage

Dear experts,
Please tell me the how to create greater_or_equal condition for query in file_io as RationalOperatorType.GREATER_OR_EQUAL is not supported for file_IO storage.
thanks n regards,
Kapoorchand.

Hi,
not sure if I got you correctly, but in
com.sap.ip.me.api.persist.query.RelationalOperatorType
There is no condition available that you are looking for. Why do you not work with
public interface Condition
Represents a condition for a query. This can either be a single condition, as FIELD = VALUE and / or a composite condition, as ( ( FIELD1 = VALUE1 OR FIELD2 = VALUE2 ) AND FIELDE 3 <> VALUE3 ).
Hope this helps!
Regards,
Oliver

How to create a scenarios for duplicate entries

Hi friends,
Please help me how to create a scenarios for duplicate entries, we are using stock transfer orders from there we need to create scenarios for duplicate entries, please guide me on the same.

Hi,
F-01 can be used to create a sample document.
Regards
Aditya

How to Create a datatype for a storeprocedure which has got array ?

Hi All,
Please tell me how to create a datatype for a storeprocedure which has got an array structure ?
Thanks,
Sindhu.

Hi Sindhu.
You would have to use a JDBC Cursor for this but it's possible only Output parameters, not Input parameters.
It's describle in a help link:
Defining an EXECUTE Statement http://help.sap.com/saphelp_nwpi711/helpdata/en/44/7b72b2fde93673e10000000a114a6b/frameset.htm
The following SQL data types are supported:
INTEGER, BIT, TINYINT, SMALLINT, BIGINT, FLOAT, REAL, DOUBLE, NUMERIC, DECIMAL, CHAR, VARCHAR, STRING, LONGVARCHAR, DATE, TIME, TIMESTAMP, BINARY, VARBINARY, LONGVARBINARY, BLOB (input and output), CLOB (input and output), CURSOR (output; only in connection with the Oracle JDBC driver)
I think you can execute your StoreProcedure many times depends of array occurs.
Regards.
Bruno.

How to create info area for process chains?

Similar Messages

Maybe you are looking for