How to create inprocess insp. lot manually

HI Team,
I have requirement to create inprocess inspection lot  as & when  required. What are the settings required to do in QM view insp. type.
I have tried with "Preferred inspection type" set up, but no inspection lot is allowed to create manually in QA01.
Then I tried with 03 insp. type "Active". But it generated lot for every production order during release of order.
But my requirement is to create lot during  inprocess production only when it is rejected.
Pls suggest me solution.
Thanks

Hello Bhushan ,
You can create a insp lot with 03 origin by putting plant & insp origin in QA01 initial screen ....but I will suggest to use inspection origin 89 with relevant setting as per business requirement as you want to create the lots only when material  is rejected .
Else you can maintain one more insp type say,0301 with insp origin 03. This will help in classifying the inspection lots  which are created for this process & not standard in-process inspection,
Can you please explain the business scenerio which demands to create lots only incase of rejections .....as to ascertain whether the product is inline with quality standards we need to inspection the same (which requires inspection lot  for lab processing & tracebility)
Thanks
Kaushik

Similar Messages

  • How to create an inspection lot for each line item of the Purchase order?

    Hi,
    How to create an inspection lot for each line item of the Purchase order ?
    In detail if possible.

    Hi
       please check this
    [thread|Create Inspection Lot;

  • How To Create the HP_TOOLS partition manually?

    Hello,
         According to HP, you can create the HP_TOOLS partition manually with type FAT32 and make the partition name HP_TOOLS. I installed Windows 8 on my MSata Drive after I upgraded it and for some reason you can't install the HP_TOOLS on those drives it always gives an error. So When you download the HP UEFI Support Environment from the drivers/software from HP, it will install it on the Hard Drive which I use as a backup drive now.
    However, when you restart the computer and hit F2, you do not have the full feature to even run a system check, I have to boot it from a USB instead. How do I fix this problem so I can do a "Custom" install back of the HP Tools and be able to use it without any issues?
    What I have done was create a partition on my msata with 2.01GB like it created on my HDD. I made it Fat32 and named it like it said HP_TOOLS. I then copied over the Folder from the HDD to the MSATA Drive. Still it does not work. Any advise would greatly be appreciated!

    Bump

  • How to create inbound JIT Call Manually?

    Hi All,
    Currently I am doing SAP JIT configuration. I have created the JIT Customer.
    Now I need to get a JIT call to determine the schedule lines in the scheduling agreements. In real scenario, JIT call comes through Idoc from the customer side.
    But I need to create JIT Call manually to do the configuration. So , How to create it? Is it Possible?
    Thanks,
    Anbazhagan E

    Use transaction JIT1
    Put in the Sold to customer number and the Ship to Partner description, just like in the first section of JITV, and put a unique value for this JIT Customer is the "Ext. JIT Call No." field.
    When you hit enter you will get the Call Components grid or both the Component Groups and the Call Components Grids (depending on what Maintenance Mode you selected on JITV).
    Let's assume your Mtce Mode = 3 - Discrete Material / Summ JC. Therefore you only get the Call Components grid on transaction JIT1.
    You need to fill in certain fields at a minimum, more depending on the JIT Call Configuration.
    Bare minimum, you need:
    1) Customer material or Material (if you fill in one, when the program finds the matching LZJ SA, it wil default the other)
    2) External Status (ex. ECRE or CR or whatever External status you have defined and linked to the CREA action in configuration)
    3) Planned Ship date or Planned Requirement date
    4) Quantity
    If when entering the Customer material or Material, the Sales Document and Sales Item is not populated, that means you do not have a matching LZJ type SD scheduling agreement in the system. Or the data you are entering on JIT1 does not exactly match.
    The SA must be there before you can do JIT1.
    The JITV entry must be there before you can set up the SA.
    Hope this helps at a basic level.
    You may need to enter additional data at the header of the Inbound JIT Call, or at the Call Components level, depending on a particular scenario or to correctly find the SA.
    If you have EDI that has come in and you want to create a similar JIT Call. Use the [Propose JIT Call button]
    On the 1st screen, enter the Sold to, Partner Desc and new JIT Call number.
    When you get to the 2nd screen, click the Propose JIT Call button, and enter the JIT Call you want to copy from. You just need to enter the External Status and new Planned Date. The materials and quantities and other fields get copied from the source JIT Call.

  • How to create a SRV record manually

    I need to create the SRV record manually in order to join my Windows XP machines to the Xserve domain, How can I do this?

    Drop this question, because lack of answer.

  • [QM] How to create an inspection lot with task list assigned?

    Hello, everyone.
    I know, the similar questions have been asked plenty of times, but I am still unable to find a suitable receipe of the inspection lot creation. My goal is to create an inspection lot programmatically and be able to record its results using, e.g., BAPI_INSPOPER_RECORDRESULTS.
    Creating a lot does not appear to be a big problem. I just call the following FMs:
    QPL1_INITIALIZE
    QPL1_INSPECTION_LOT_CREATE
    QPL1_UPDATE_MEMORY
    QPL1_INSPECTION_LOTS_POSTING
    BAPI_TRANSACTION_COMMIT
    As a result, I have a new shiny inspectin lot, but it comes with statuses "CRTD" and "CHCR". I do specify PLNAL and PLNNR fields values for the QALS structure which is passed to QPL1_INSPECTION_LOT_CREATE, but that does not seem to have any effect. When I call BAPI_INSPOPER_RECORDRESULTS later (result values and inspection points come from another lot which is used as a template), it reports of beging unable to find characteristics for the inspection operations (error E026).
    Does anyone know which of the QPL1_INSPECTION_LOT_CREATE parameters affect task list assignment besides PLNAL and PLNR? Or maybe there is a special FM which associates a task list with an inspection lot?
    Thank you in advance.

    Hi Samuel,
    You can get create an Agent as a Task by using the following steps:
    1. Go to Customizing --> EHS --> Industrial Hygiene & safety --> Risk Assessment --> Specify Agent Types
    2. Click on "TASK' Agent type and click on Details icon (CtrlShiftF2)
    3. In the "Only EHS-IHS" drop down, Select "No"
    4. Save the entry
    5. Now try creating an Agent [CBIH92] and you can create an Agent as a Task.
    Hope it Helps,
    Raghu

  • How to create an inspection lot out of a sales order?

    Hey all,
    I know that at purchasing side you can make a "source inspection" which makes it possible to create an inspection lot before you do a goods receipt.
    Is somehting similar existing at sales side meaning that you can create the inspection lot out of the sales order, but before a delivery or delivery note is created?
    Thanks for the replies,
    Philippe

    hi
    yes system can create inspection lot before or after delivery provided you have activated the material for inspection type and specified in the QM info record
    for detailed process kindly refer here
    http://help.sap.com/saphelp_46c/helpdata/en/af/fc4f35dfe82578e10000009b38f839/tree.htm
    regards
    thyagarajan

  • How to differentiate the insp lots with same lot origin

    Hi,
    My client is
    1. Procuring a  Finished good directly ( same way as Raw material is being procured ) & then sale it.
    2. In another scinarion the same material may be produced at Vendor's end ( Sub contracting )
    3. In another scinario this is in house produced material.
    Now the requirement is seperate tracking / list for each case.
    Inspection type 04 can be activated to address the 3'rd case.
    But how to segregate 1'st & 2'nd case from each other ???
    I have created one new inspection type Z01 for lot origin 01. Similarly insp type 01 is also activated.
    If Z01 insp type is marked as preferred insp type, then system always consider this insp type.
    How to differentiate inspection type Z01 & 01  at incoming inspection stage ????
    regards,

    Dear Gajesh / Roderick
    Thanks for reply & Sorry for the delayed reply from my side.
    Gajesh as per your suggestion i used the break point in user exit QAAT0001 & after that i have executed PO & MIGO transaction, But after executiing it did not stop at a particular break point.
    AM i doing some thing wrong???? or any alternate solution is there??
    Roderick,  i have explored the status profile but found to be use fulll for changing stage one time only.  i.e. between 0101 to 01. But here i want to choose the inspection type base on PO type.
    Kindly suggest further action.
    Once abain thanks.
    regards,
    Singh
    Edited by: Singh15667 on Jul 24, 2009 10:54 AM

  • How to create a pagedefinition file manually..?

    Hi All,
    I know that jdeveloper will automatically creates a page definition file.. But i just want to know that "Can't we create that page-definition file manually??"
    Thanks in advance,
    Deepti

    Hi Arun,
    Thanks for responding immediately..!
    <?xml version="1.0" encoding="UTF-8" ?>
    <pageDefinition xmlns="http://xmlns.oracle.com/adfm/uimodel" version="11.1.2.60.81" id="Dept01PageDef"
    Package="com.polaris.reporting.view.pageDefs" ControllerClass="com.polaris.reporting.view.CustomPage">
    <parameters/>
    <executables>
    <variableIterator id="variables"/>
    <iterator Binds="EmpVO1" RangeSize="25" DataControl="AppModuleDataControl" id="EmpVO1Iterator"/>
    <searchRegion Binds="EmpVO1Iterator" Criteria="" Customizer="oracle.jbo.uicli.binding.JUSearchBindingCustomizer"
    id="EmpVO1Query"/>
    <iterator Binds="DummyVo2" RangeSize="25" DataControl="AppModuleDataControl" id="DummyVo2Iterator"/>
    </executables>
    <bindings>
    <tree IterBinding="EmpVO1Iterator" id="EmpVO1">
    <nodeDefinition DefName="com.polaris.reporting.model.EmpVO" Name="EmpVO10">
    <AttrNames>
    <Item Value="Comm"/>
    <Item Value="Deptno"/>
    <Item Value="Empno"/>
    <Item Value="Ename"/>
    <Item Value="Hiredate"/>
    <Item Value="Job"/>
    <Item Value="Mgr"/>
    <Item Value="Sal"/>
    </AttrNames>
    </nodeDefinition>
    </tree>
    </bindings>
    </pageDefinition>
    I just want to know how the above page-definition file works.. I want to know the functionality of the tags like <executables>,<bindings> . If possible can u plz tell me the java classes that are associated with the page definition file

  • How to create required object types manually ?

    Hi all,
    I got this XML schema entry:
    <xs:element name="Chapters"
    minOccurs="0"
    maxOccurs="1"
    xdb:SQLName="CHAPTERS"
              xdb:SQLType="XDB_CHAPTERS_TYPE">
    <xs:complexType>
    <xs:sequence>
    <xs:element name="Chapter"
              xdb:SQLName="CHAPTER"
    xdb:SQLCollType="XDB_CHAPTERS_COLLECTION"               
                   minOccurs="1"
                   maxOccurs="unbounded"
                   xdb:SQLType="XDB_CHAPTER_DETAILS_TYPE">
         <xs:complexType>
              <xs:simpleContent>
              <xs:extension base="xs:string">
              <xs:attribute name="No"
                        type="xs:positiveInteger"
                        xdb:SQLName="NO"/>
              </xs:extension>
              </xs:simpleContent>
         </xs:complexType>
         </xs:element>
         </xs:sequence>
         </xs:complexType>
    </xs:element>
    which results in this entry in a XML file:
    <Chapters>
    <Chapter No="12">The Longest Time</Chapter>
    </Chapters>
    Question: How do I have to create the corresponding object type, which is required for XML schema registration ?
    Any help is appreciated...
    Regards Markus

    Hi Markus
    I don't know why you want to manually creates the types... anyway since it can by quite complex to write all CREATE TYPE statement for a real schema... here my suggestion:
    1) activate a tracing with the following statement
    ALTER SESSION SET EVENTS '31098 TRACE NAME CONTEXT FOREVER'
    2) register the schema with GENTYPES=&gt;TRUE
    3) in a trace file under UDUMP you find all the statements executed, therefore the CREATE TYPE as well
    4) use these statement as basis for your scripts
    Chris

  • How to Create one TLB Order manually with multiple deployed STR's

    Hello,
    We are currently facing an issue when trying to make a TLB manually by right clicking on the deployed STR's.
    APO generates multiple orders for each item.
    Business requirement is to generate one TLB Order.   
    For example there are 10 Confirmed STR's and the  planner wants to choose the deployed STR's manually from the list of 10 products.   When we right cliick and select each product (for either partial or full ) it moves to the TLB order, but generates multiple orders.
    Is there a way to restrict the requested lines to be in one Order?  So that when the order is CIFed to ECC, there's only one STO generated with multiple lines.
    Regards,
    Bhavesh

    Hi Bhavesh,
                   By manual TLB process only you can create stock transfer order with SINGLE line item. because your deployed STRs always will have single line item and you are selection one by one and converting manually. in STD process you can not club items manually...
    Yes it can be very much possible by automatic TLB run. it will take all the deployed orders and converting as TLB order by considering TLB profile where min , max limits maintained. also there is concept if you maintain loading group in product master based on that materials will be grouped together.....
    Clubbing items into one order is done by TLB heuristics.. but when you do manually you are deciding how to do it?....
    You can do one thing... after creation of TLB order with single item..you can edit and include some more items manually. Accordingly you need to delete deployed STRs.......
    If you want to automate this then you need to look out for BADI... not sure possible or not
    Regards
    Thennarasu.M

  • How to create JAX-RPC WS manually

    I have a static WSDL file. Do you have any step by step instructions that show how to generate a JAX-RPC artifacts manually please? I can't do it using JDeveloper because my WSDL file is big so I got out of memory error when I tried to use JDev even though I increased the VM memory for JDev to 1024M already.
    That's why I have no choice but to generate the JAX-RPC artifacts manually.
    I'm using 10.3.1 WL.
    Thanks

    Ok just as I expected. So I guess I am left with the following two options
    1) either I switched to using JAXB in my apps instaed of xmlbeans....
    2) or if I still wanna use the old JAX-RPC web services to deploy on the Weblogic 10gR3 server i will have to create my own ant task jwsc directly......as shown below in your docs
    Programming Web Services for WebLogic Server (ant tasks)
    http://download.oracle.com/docs/cd/E13222_01/wls/docs92/webserv/anttasks.html
    Getting Started With WebLogic Web Services Using JAX-RPC
    http://download.oracle.com/docs/cd/E12840_01/wls/docs103/webserv_rpc/index.html
    Will OEPE be supporting the old JAX-RPC anytime in the near future release? or have to create own build ant task to call jwsc ant task directly to compile JAX-RPC web services??

  • Inprocess insp

    From QM point of view what is the difference between inprocess insp in discrete and repetitive mfg?
    how process flow will be different?
    as per me there will only difference in tcode of routing creation.
    please clarify
    Message was edited by:
            sandip raut

    sir,
    i tried to create the insp lot with MFPR,but i am getting message as "list contains no data".i am using this tcode first time.so can please help me by explaing it in detail.
    thanks in advance.
    please answer sir.
    this is very urgent.please
    Message was edited by:
            sandip raut
    Message was edited by:
            sandip raut
    Message was edited by:
            sandip raut

  • How to Create inspection that assign to Purchase Order / Material Document

    Dear QM Master,
    I am using QA01 to create inspection lot but can any master tell me , How to Create inspection that assign to Purchase Order / Material Document ?
    Appreciate.
    Thank you.

    Hello,
    When you create an inspection lot manually, you cannot reference an original document (for example, a goods receipt document, an order, or a delivery note).
    In QA01 you can create inspection lot manually for all inspection lot origins except the following:
    10 - Delivery to customer with sales order
    11 - Delivery to customer without sales order
    12 - General delivery
    13 - Repetitive manufacturing
    14 - Plant maintenance
    You can also refer this link
    http://help.sap.com/saphelp_47x200/helpdata/en/2d/3519d8448c11d189420000e829fbbd/frameset.htm
    Please check and revert.
    Regards,
    Priyanka

  • Creating new inspection lot origin via SPRO

    Hi guys.
    I would like to know how to create new inspection lot origin via SPRO.
    I tried going via SPRO->Quality Management->Quality Inspection->Inspection Lot Creation->Maintain Inspection Lot Origins and Assign Inspection types , but could not find the way.
    Thanks in advance.

    Hi,
    You should 1st create/define the inspection types in OQL1 for your needs then you should assign them to locations.
    Have you defined your inspection types?
    Check n revert
    Shiva

Maybe you are looking for