How to create inspection plan in mass for material

Dear Guru,
                How to create inpection plan for material in MASS, usually we will create inspection plan in QP01 but in mass for more than one material how to maintaain? Please help
Regards
Karthik.

Hi raja
refer following lonks
QM- LSMW FOR INSPECTION PLAN
Re: CEWB:Inspection Plan upload
bapi for qm inspection plan
Regards
Sujit

Similar Messages

  • Create Inspection plan at once for many materials through QP01. Possible?

    Dear Friends,
    Is it possible to create Inspection Plant for more than one material at onece through QP01 when operation activity and Characteristics are same. I will change the Characteristics specifications afterwards.

    As suggested in earlier reply you can assign multiple materials to one inspection plan.
    But you may still need more than one plan because of
    1. UOM is maintained in Inspection plan header. So you have to create different inspection plan if you receive materials in different Unit of measures.
    2. Usage is also at header level, so depending on configuration, usage for 01 inspection type may be different from usage for 0101 inspection type.
    If you like the user exit approach.
    1. Create a dummy material and assign default inspection plan to this material.
    2. In the user exit change the inspection plan assignment.  Assign inspection plan from this dummy material.
    Form us this was a very useful approach during testing or for new material where inspection plan was not created in time.
    Once this default inspection plan is assigned, inspection lot is released even without inspection plan. If we need,  we can always change the default inspection plan in QA02 transaction before RR
    AK Marwadi.

  • How to create a Plan.xml file for modification

    Hi,
    I am trying to create a plan.xml file. Is there any way, I can generate a plan.xml file.
    I see a tab in Admin Console in deployments and plan. but there is nothing there. what it has to do with plan.
    Thanks
    regards
    Amir riaz

    You can find the steps here.
    http://weblogic-wonders.com/weblogic/2009/11/29/plan-xml-usage-for-message-driven-bean/
    http://weblogic-wonders.com/weblogic/2009/12/16/invalidation-interval-secs/

  • How to create an own  Maintenance status for Material

    Hi,
    is it possiple to create an own  Maintenance status
    In SAP are following status existing
    User department Maintenance status
    Work scheduling A
    Accounting B
    Classification C
    MRP D
    Purchasing E
    Production resources/tools F
    Costing G
    Basic data K
    Storage L
    Forecasting P
    Quality management Q
    Warehouse management S
    Sales V
    Plant stocks X
    Storage location stocks Z
    I will use it for authority check.
    Thanks
    regards, Dieter

    Hello Dieter,
    No it is not possible to create an additional status. You can create subcreens or add new fields but a view itself is not possible.
    For sreens and fields please review note  44410
    Thanks
    Amber

  • How to map revision level materials to already created inspection plan?

    Dear All,
    I have created single inspection plan for many existing raw materials. Now it has been found that each raw material have different revision level as well as valid from date.
    My inspection plan is created on 02.07.2014 and each raw material has different revision level with valid from date which is also very old (like 11.03.2012 for revision level 09).
    My Requirement is:  how to correct my inspection plan?,  so that it will work for each assigned raw material and there will not be any material revision level wise problem created for the inspection lot so that my inspection lot should be created in REL status in QA32 transaction i.e. inspection lot is assigned automatically as per standard SAP functionality.
    Thanks,
    Narresh

    Hi Amol,
    Thanks for your reply.
    In this business scenario, we are not creating inspection plan for each raw material because there is similarity in inspection for 40-50 raw materials and total number of raw materials are around 500. This will be very difficult and unnecessarily data creation in the system.
    As per my understanding revision level is for material master revision and if material master changes then how it affect so much on inspection plan? also is it means that for every revision in future we will have to create new inspection plan?  hence I believe that if I will make back dated inspection plan for raw materials then it may work. Is my understanding is correct?
    Expecting much better solution from QM experts.
    Thanks,
    Narresh

  • Is it possible to create  inspection plan for "Inprocess Inspection"

    Hi,
    Is it possible to create  inspection plans for "Inprocess Inspection".
    If yes , what would be the "task List Usage".Is it "1"?
    If no ,then how to map this requirment?
    Regards
    Vemula

    Hi
    Vemula
    Generally as Per SAP std Routing is used for inspection of 03 type of inspection.
    but you can also customize the Inspection task list Usage for Inprocess Inspection.
    This is possible through
    QCC0>Quality Inspection>Insp lot creation>Assign Insp type to origine>
    here informt of 03 inspection type you can assign
    Task list type:Q
    Usage:either 1(Production) or 3(Universal)
    save
    Regards
    Poonam

  • Create Inspection Plan -error in control Indicators

    Hi,
    I am creating Inspection Plans using LSMW-DIRECT INPUT Method.
    Although MIC's control indicator parameters are correct while creating a plan it is changing the control indicator parameters.
    how can we suppress this?
    I want to use MIC's default parameters.
    Regards
    Praveen

    Hi Naresh,
    QA32 screen shot suggests material has Revision level as "B".
    Now Check Revision level for Inspection plan.
    Amol.

  • Error while creating Inspection plan

    Hi,
    While creating inspection plan in QP01, system is showing error  "Material type ZROH is not defined for task list type Q''
    Please help me to solve the error.
    Thanks
    Prasant

    Hi,
    This is due to the configuration error,
    Just use T.Code OP50
    Create an entry for task list type "Q" with material type "ZROH" and save,
    Then try creating a Quality Inspection Plan, it will work
    Regards
    Merwyn

  • Errors while creating Inspection plan using BAPI_INSPECTIONPLAN_CREATE

    Hi All,
    I am writing an upload tool for inspection plans. In this program I use bapi: BAPI_INSPECTIONPLAN_CREATE.
    I made an extraction of a excisting inspection plan with SXDA_TOOLS which uses the same bapi and filled the bapi structures with the similar data. Now I am getting strange messeges in the return structure as below.
    1. Material is not maintained for plant NNNN. But the material is mainained for that plant.
    2. Consistency check not successful when creating operation
    3. Inspection characteristic cannot be uniquely assigned to one operation
    Let me know your suggestions
    Thanks,
    Sabu

    Hi All,
    Have any one used this BAPI, BAPI_INSPECTIONPLAN_CREATE to create Inspection Plan ?
    Can you help me on above errors?
    Thanks in advance,
    Sabu

  • How to create Billing Plan in sales order using Function module /BAPI

    hi,
    How to create Billing Plan in sales order using Function module /BAPI
    i hv check few FM such
    BILLING_SCHEDULE_READ
    BILLING_SCHEDULE_GET_NUMBER
    BILLING_SCHEDULE_SAVE
    But unable to create billing plan for a sales order.....any other method to create???

    Hi,
    Use this link.
    Create sales order with billing plan via LSMW and BAPI BUS2032
    BAPI or Function to update Billing Plan in Sales Order Items
    Hope this will help you.
    Regards,
    Vijay

  • MD04 - How to create a requirement in MD04 for a scheduling agreement

    Hi,
    Pls advice How to create a requirement in MD04 for a scheduling agreement. pls mention the steps and t codes.
    thanks in advance.

    Hi Prajit,
    Sales people will create sales scheduling greements through VA31 T-Code (normally for finished products).In that they define forecast schedules as well as JIT schedules.After creation, these will be appeared in MD04 screen as requirement for that finish material.
    In MRP run,system will create procurement elements (planned orders for example) for these requirements.
    Regards,
    Raja.

  • How to Create inspection that assign to Purchase Order / Material Document

    Dear QM Master,
    I am using QA01 to create inspection lot but can any master tell me , How to Create inspection that assign to Purchase Order / Material Document ?
    Appreciate.
    Thank you.

    Hello,
    When you create an inspection lot manually, you cannot reference an original document (for example, a goods receipt document, an order, or a delivery note).
    In QA01 you can create inspection lot manually for all inspection lot origins except the following:
    10 - Delivery to customer with sales order
    11 - Delivery to customer without sales order
    12 - General delivery
    13 - Repetitive manufacturing
    14 - Plant maintenance
    You can also refer this link
    http://help.sap.com/saphelp_47x200/helpdata/en/2d/3519d8448c11d189420000e829fbbd/frameset.htm
    Please check and revert.
    Regards,
    Priyanka

  • Creating Inspection plan using BAPI

    HI all,
    I am using the FM 'BAPI_INSPECTIONPLAN_CREATE'. I am unable to update the Inspection characteristics as multiple entries. Its getting updated only the last item.
    Expecting answer from the experts.
    Ravi.

    Hi,
       you can check the BAPI_INSPECTIONPLAN_CREATE for the named purpose, the values you named are in the structure BAPI1191_CHA_C please read the BAPI documentation:
    Functionality
    You can use this function module to create inspection plans and all its subordinate objects.
    You can create a key date view and the complete history of an inspection plan. It is useful to have a history when transferring data from external systems.
    Example
    You want to create an inspection plan with operations and inspection characteristics for key date 01.01.2000. Make an entry in the following tables for each object:
    TASK
    OPERATION
    INSPCHARACTERISTIC
    If you want to assign test equipment to the inspection characteristic in field ITEM_NO_OF_PRODUCTION_RESOURCE, you must have assigned this test equipment in PARAMETER PRODUCTIONRESOURCE.
    Notes
    If no error occurs during the transfer of data, the export parameters GROUP and GROUPCOUNTER contain the key for the task list created. A COMMIT WORK must be executed for writing data to the database.
    All errors that have occured are logged in the export parameter RETURN. If there are inconsistencies, the inspection plan to be created is rejected
    <b>Reward points</b>
    Regards

  • BDC - Creating Inspections Plans using T-Code QP01

    Hi All,
    I want to Create Inspection Plans using QP01 transaction using BDC.
    It having 4 screens. Third and Fourth screens having line item details.
    I did recording. Upto First and second screens data is populating properly, coming to third screen data is not taking even though bdctable having data (in debug mode i found). I don't know hw to resolve this problem.
    Can u please explain hw to populate line-item details, possible give some example coding .
    Regards,
    Prabhakar

    Hi,
      If you are comfortable using function modules then you will not have any difficulty in using the BAPI, only thing we need to take care of the following, refer the following this is not using the bapi for Inspection plan, this is done for different purpose, still you can refer this and use accordingly,
    Data declarations,
    DATA: TOPNODEONLY LIKE BAPICO_GROUP-TOPNODEONLY,
          RETURN LIKE BAPIRET2,
          LT_HIERARCHYNODES LIKE BAPISET_HIER OCCURS 0,
          LT_HIERARCHYVALUES LIKE BAPI1117_VALUES OCCURS 0,
          LS_HIERARCHYNODES LIKE BAPISET_HIER,
          LS_HIERARCHYVALUES LIKE  BAPI1117_VALUES,
          LV_FLAG TYPE I,FLAG.
    DATA: BEGIN OF ORDERS OCCURS 0,
          ORDER_GROUP TYPE GRPDYNP-NAME_COALL,
          DESC(30),
          ORDER TYPE GRPVALUES-VFROM,
          END OF ORDERS.
    START-OF-SELECTION.
      CALL FUNCTION 'WS_UPLOAD'
           EXPORTING
                FILENAME = FILENAME
                FILETYPE = 'DAT'
           TABLES
                DATA_TAB = ORDERS.
      SORT ORDERS BY ORDER_GROUP ORDER.
      LOOP AT  ORDERS.
        IF LV_FLAG NE 1.
          TRANSLATE ORDERS-ORDER_GROUP TO UPPER CASE.
          LS_HIERARCHYNODES-GROUPNAME = ORDERS-ORDER_GROUP.
          LS_HIERARCHYNODES-DESCRIPT = ORDERS-DESC.
          LS_HIERARCHYNODES-HIERLEVEL = 0.
          LS_HIERARCHYNODES-VALCOUNT = 0.
          APPEND LS_HIERARCHYNODES TO LT_HIERARCHYNODES.
          LV_FLAG = 1.
        ENDIF.
        CLEAR LS_HIERARCHYNODES.
        LS_HIERARCHYNODES-GROUPNAME = ORDERS-ORDER.
        LS_HIERARCHYNODES-HIERLEVEL = 1.
        LS_HIERARCHYNODES-VALCOUNT = 0.
        APPEND LS_HIERARCHYNODES TO LT_HIERARCHYNODES.
        AT END OF ORDER_GROUP.
          FLAG = 'X'.
        ENDAT.
        IF FLAG = 'X'.
    BAPI is called to create Internal Order group in the system
          CALL FUNCTION 'BAPI_INTERNALORDRGRP_CREATE'
               TABLES
                    HIERARCHYNODES  = LT_HIERARCHYNODES
                    HIERARCHYVALUES = LT_HIERARCHYVALUES.
          CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
          CLEAR :  LT_HIERARCHYNODES[], LS_HIERARCHYNODES.
          CLEAR : LV_FLAG,FLAG.
        ENDIF.
      ENDLOOP.
    Hope this helps,
    Rgds,

  • Create Inspection plan ( BAPI_INSPECTIONPLAN_CREATE )

    Hi,
    I am trying to create Inspection plan using BAPI -> BAPI_INSPECTIONPLAN_CREATE
    On executing i am getting following messages:
    E BAPI 001
    A CPCL 006 Task list Q 1 1 already exists
    A CPCC_DT 210 For further processing, the routing entry is missing
    Also same scenario i have tested in QP01 with same details that i have mentioned above. There it is working properly.
    Thanks
    Smruti Ranjan

    Hi All,
    Have any one used this BAPI, BAPI_INSPECTIONPLAN_CREATE to create Inspection Plan ?
    Can you help me on above errors?
    Thanks in advance,
    Sabu

Maybe you are looking for

  • Issue in SAP-query

    hi all, i have transported the infoset , user group and query in the production server from the test server through the download/upload feature of report RSAQR3TR all of the above infoset , query , user grp are transported properly. but when i am exe

  • Combining text and image

    Ok, I have a what hope is an easy to solve problem: I have a BufferedImage that shows what a Swing component looks like, like a screenshot. This is how I create it: BufferedImage i = new BufferedImage(this.getSize().width,this.getSize().height,Buffer

  • Response Code Validation

    Hi All, My Scenario is like this. Asynch xi--Synch communication once I get the Response from the traget to xi I need to validate one filed value from respcode. My Question is how to validate the response code in the switch step of the  BPM Regards R

  • GUI_DOWNLOAD -- Font

    Hi Friends , Am working on GUI_DOWNLOAD , the requirement is that when file text is  downloaded on the presentation server this shoule be the font required by the user. How can set the font required by user . Please let me know . FULL POINTS AWARDED

  • NOthing in my computer has changed, why can't I hotsync?

    This is the message I get when I open the Hotsync Manager: The Notifier file 'D:\MobiPalmSync.dll' was not found. What nxt? I can't perform the sync. I reinstalled the Palm software, nothing. Help. 8-) Post relates to: LifeDrive