How to create itemwise multiple order report Quary?
Hi,
create item A and multiple order 1,2,3 and have different Quantity
so I want item wise multiple order quantity and BP name it is possible in sap b1
Item name BP Name1 Bpname2 Bpname3
A 10 15 20
Hi,
Yes possible. Please advice in which table you want get quantity.
Try this for open sales order quantity.
Select [A] as Itemcode, [D] as Description, [01],[02],[03]
from(
SELECT T0.[ItemCode] as A, T0.[Dscription] as D, sum(T0.[Quantity]) as T, T1.[CardCode] as C FROM RDR1 T0 INNER JOIN ORDR T1 ON T0.DocEntry = T1.DocEntry WHERE T0.[LineStatus] = 'o' GROUP BY T0.[ItemCode], T0.[Dscription],T1.[CardCode] )S
pivot
(sum(T) FOR C in ([01],[02],[03])) P
Note: Replace 01,02 and 03 with your customer code.
Thanks & Regards,
Nagarajan
Similar Messages
-
How to create a Sales order from multiple quotations?
Hi All,
Please tell me how to create one sales order from multiple quotations?
Regards,
MaddyHello Maddy,
To create the sales order from multiple quotation, you should put the value "F - Only at item level: Always with selection option" under Quotation determination in your sales transaction type.
It will give you a pop-up to choose your quotations item while creating the sales order.
Some per-requisites are there:
1. Copy control should be maintained between your quotation and sales order.
2. Quotation should be error free and should have the status "Released"
3. Sold to party and Organization should be same in both transaction.
For more information you can check the below link:
Processing Quotations - Sales Transactions - SAP Library
Best Regards,
Dinesh -
How to create multi garnishment order for the same garnishment document
Hi,
Can anyone tell me how to create multi garnishment order for the same garnishment document. I tried to copy the entry in IT0195 but the sequence field is grayed out so it will just delete the old record. What configuration should I do to make this possible?
Thanks a lot in advance.hi,
As far as I got it.
You cannot have multiple Garnishment order but if a need arises you have to maintain it in IT216.
For that follow this path goto PA30->pernr->194->change->Garnishment->adjustment.
Since like order you cannot maintain adjustment also directly.
Regards,
Amit
Reward all helpful replies. -
How to create the sales order using BAPI's ....?
Hi Guru's,
could you please provide how to create the sales order using BAPI's .....i need step by step process and please provide the details from scratch....basically i don't have basic knowledge on this....please provide required inputs ....:)
thanks in advance
Srinivas......Hi Guru's thanks for your inouts and your valuble time...
please find the program logic below...
*& Report ZAREPAS30
REPORT zarepas30.
DATA : gs_vbeln TYPE vbak-vbeln,
gs_order_header_in TYPE bapisdhd1,
gs_order_header_inx TYPE bapisdhd1x,
gt_order_items_in TYPE STANDARD TABLE OF bapisditm,
gwa_itab1 TYPE bapisditm,
gt_order_items_inx TYPE STANDARD TABLE OF bapisditmx,
gwa_itab2 TYPE bapisditmx,
gt_order_partners TYPE STANDARD TABLE OF bapiparnr,
gwa_itab3 TYPE bapiparnr,
gt_return TYPE STANDARD TABLE OF bapiret2,
gwa_itab4 TYPE bapiret2.
Sales document type
PARAMETERS: p_auart TYPE auart OBLIGATORY.
Sales organization
PARAMETERS: p_vkorg TYPE vkorg OBLIGATORY.
Distribution channel
PARAMETERS: p_vtweg TYPE vtweg OBLIGATORY.
Division.
PARAMETERS: p_spart TYPE spart OBLIGATORY.
Requested Delivery Date
PARAMETERS: p_edatu TYPE edatu OBLIGATORY.
Sold-to
PARAMETERS: p_sold TYPE kunnr OBLIGATORY.
Ship-to
PARAMETERS: p_ship TYPE kunnr OBLIGATORY.
Material
PARAMETERS: p_matnr TYPE matnr OBLIGATORY.
Quantity.
PARAMETERS: p_menge TYPE kwmeng OBLIGATORY.
Plant
PARAMETERS: p_plant TYPE werks_d OBLIGATORY.
Start-of-selection.
START-OF-SELECTION.
Header data
Sales document type
gs_order_header_in-doc_type = p_auart.
gs_order_header_inx-doc_type = 'X'.
Sales organization
gs_order_header_in-sales_org = p_vkorg.
gs_order_header_inx-sales_org = 'X'.
Distribution channel
gs_order_header_in-distr_chan = p_vtweg.
gs_order_header_inx-distr_chan = 'X'.
Division
gs_order_header_in-division = p_spart.
gs_order_header_inx-division = 'X'.
Reguested Delivery Date
gs_order_header_in-req_date_h = p_edatu.
gs_order_header_inx-req_date_h = 'X'.
gs_order_header_inx-updateflag = 'I'.
Partner data
Sold to
gwa_itab3-partn_role = 'AG'.
gwa_itab3-partn_numb = p_sold.
APPEND gwa_itab3 TO gt_order_partners .
ship to
gwa_itab3-partn_role = 'WE'.
gwa_itab3-partn_numb = p_ship.
APPEND gwa_itab3 TO gt_order_partners .
ITEM DATA
gwa_itab2-updateflag = 'I'.
Line item number.
gwa_itab1-itm_number = '000010'.
gwa_itab2-itm_number = 'X'.
Material
gwa_itab1-material = p_matnr.
gwa_itab2-material = 'X'.
Plant
gwa_itab1-plant = p_plant.
gwa_itab2-plant = 'X'.
Quantity
gwa_itab1-target_qty = p_menge.
gwa_itab2-target_qty = 'X'.
APPEND gwa_itab1 TO gt_order_items_in.
APPEND gwa_itab2 TO gt_order_items_inx.
Line item number.
gwa_itab1-itm_number = '000020'.
gwa_itab2-itm_number = 'X'.
Material
gwa_itab1-material = p_matnr.
gwa_itab2-material = 'X'.
Plant
gwa_itab1-plant = p_plant.
gwa_itab2-plant = 'X'.
Quantity
gwa_itab1-target_qty = p_menge.
gwa_itab2-target_qty = 'X'.
APPEND gwa_itab1 TO gt_order_items_in.
APPEND gwa_itab2 TO gt_order_items_inx.
CALL FUNCTION 'BAPI_SALESORDER_CREATEFROMDAT2'
EXPORTING
order_header_in = gs_order_header_in
ORDER_HEADER_INX = gs_order_header_inx
IMPORTING
SALESDOCUMENT = gs_vbeln
tables
RETURN = gt_return
ORDER_ITEMS_IN = gt_order_items_in
ORDER_ITEMS_INX = gt_order_items_inx
order_partners = gt_order_partners.
Check the return table.
LOOP AT gt_return into gwa_itab4 WHERE type = 'E' OR type = 'A'.
EXIT.
ENDLOOP.
IF sy-subrc = 0.
WRITE: / 'Error occured while creating sales order '.
ELSE.
Commit the work.
CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
WRITE: / 'Document ', gs_vbeln, ' created'.
ENDIF. -
How to create Matrix with Group report layout in xml
Hi,
i would be glad if anyone could tell me How to create Matrix with Group report layout in xml?
Here i am attaching the required design doc
below is the code
select COST_CMPNTCLS_CODE,
-- crd.RESOURCES,
NOMINAL_COST,
cmm.COST_MTHD_CODE,
-- crd.COST_TYPE_ID,
gps.period_code
-- ORGANIZATION_ID
from CM_RSRC_DTL crd,
gmf_period_statuses gps,
CM_MTHD_MST cmm,
CR_RSRC_MST crm,
CM_CMPT_MST ccm
where gps.period_id = crd.PERIOD_ID
and crd.cost_type_id = cmm.cost_type_id
and crd.RESOURCES = crm.RESOURCES
and crm.COST_CMPNTCLS_ID = ccm.COST_CMPNTCLS_ID
and gps.period_code in (:p_period1, :p_period2, :p_period3)
group by COST_CMPNTCLS_CODE, cmm.COST_MTHD_CODE, gps.period_code,NOMINAL_COST
order by 1,2,3,4.
The o/p of the report shoud be as given below
Period-1 Period-2 Period-3 Period-4
COMPONENT
LABOUR - DIRECT
Actual 1 2 3 4
Actual Rate 10 10 10 10
Standard Rate
Var%
DEPRICIATION-DIRECT
Actual
Actual Rate
Standard Rate
Var%
OVERHEAD - DIRECT
Actual
Actual Rate
Standard Rate
Var%
LABOUR - IN DIRECT
Actual
Actual Rate
Standard Rate
Var%
Thanks in advanceYour friend is obviously not a reliable source of HTML
information.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Mr.Ghost" <[email protected]> wrote in
message
news:f060vi$npp$[email protected]..
> One of my friends advised me to develop my whole site on
the layout mode
> as its
> better than the standard as he says
> but I couldnot make an ordinary table with rows and
columns in th layout
> mode
> is there any one who can tell me how to?
> thanx alot
> -
Hi Guys,
Any one tell me how to create a Sales Order. What are the Mandatory parameters we need to pass while creating. Thanks in advance.
Thanks
Kiran.BHello kiran,
<b>**REMEMBER: please do reward points for good answers**</b>
1. Create sales order
This process step can be triggered as follows:
The customer accepts the quotation and places an order.
You create a sales order with reference to a quotation. For more information, see Structure link processing Quotations. The system copies the items from the quotation.
You create a sales order. This is also possible without performing the previous steps.
2. Enter products
You enter products requested by customers.
Note
If necessary, you can configure products again for every item of the sales order. You can find more information in the business scenario variant Structure linkQuotation and Order Management (Configure-to-Order) and under Structure linkProduct Configuration in the Sales Transaction.
3. Check availability, schedule order and create requirements
The system triggers an availability check and scheduling in SAP APO for every order item in SAP CRM. The confirmed quantities and dates are confirmed by SAP APO to SAP CRM, and saved in the sales order (see Structure linkAvailability Check in the Sales Order). At the same time, a customer requirement is created in SAP APO.
Note
You can also execute the availability check in SAP R/3. You can find more information under Structure linkAvailability Check with SAP R/3.
4. Maintain and determine conditions
The system determines the prices and the value of individual items. If necessary, you can process these. For more information, see Structure linkPricing.
5. Perform credit check
SAP R/3 executes a credit check based on the results of pricing in SAP CRM. The result of the credit check is confirmed in SAP CRM, and saved as the credit status at item level. For more information, see Structure linkAutomatic Credit Check.
6. System replicates sales order
After the sales order has been saved in SAP CRM, complete and without errors, it is replicated for logistics processing in SAP R/3. Order data is transferred together with confirmed scheduling lines to SAP R/3.
7. System receives sales order
After replication to SAP R/3, you can change the sales order in SAP CRM and SAP R/3. You can find more information on this under Structure linkData Exchange for Sales Transactions: CRM Enterprise - SAP R/3
8. Send order confirmation to customer
You can send the order confirmation either electronically, or in print to the customer. You can find more information under Structure linkSales Order Confirmation by E-Mail.
9. Monitor status of order
Regards
Ak -
How to create a sales order step by step please..
hi,
how to create a sales order in detail step by step.
Regards,
BBR.
Edited by: BBR on Dec 7, 2008 7:47 PM
Edited by: BBR on Dec 7, 2008 7:53 PMHi BBR
Check the following configurations are done or not
1)Go to VOR1 & VOR2 and assign dist channels and divisions to sales orgn.
2) SPRO->sales and distribution->basic functions->setup partner determination , here you maintain partner determination with the partner functions for Customer account group ,standard for sold to party is 0001
3) Create a customer with XD01
4) In OVAZ assign the sales document types to your sales area
5) Go to VN01 and maintain number ranges and assign to your sales document type (Ex: OR)
6)Go to VOV8 and select the sales document type(Ex: OR) and there you assign the number range
7) IN VOV4 check the item category determination is correct or not
8)Go to OVKK and Assign pricing procedure RVAA01 to your sales area,Cupp ,Dupp.
9) Maintain conditon records for the condition types that are there in the pricing procedure
10) Create a Material Master Record(MMR)
11) Now you can create the sales order with VA01
Regards
Srinath -
How to create open sales order using BAPI....?
Hi Guru's,
please help me how to create open sales order and which BAPI i have to use for open sales order.
please provide any program logic related to this or step by step process.....
that would be helpful to me.
thanks in advance...
Srinivas....Hi sreenu,
Open PO or Open sales order means that the complete cycle is not complete. That means the Sales order is not completely delievered or is not billed or is not paid for. Only once the cycle is completed the order status shows as complete untill then its Open.
You can use VA05 to find open sales orders.
Similarlry open PO's are those PO's whos inbound delivery is not complete or whos goods receipt is not complete and whos payment is not done to the vendor
U cannot directly find the open PO and open SO from any table.
That u have to calculate from the status of the PO and SO and then check wheteher that is complete or not.
U have table VBUP for SO status.Check out the fields in that table
pls see the below link.
http://abaplovers.blogspot.com/2008/02/bapi-sales-order-create-code.html
http://msdn.microsoft.com/en-us/library/cc185190.aspx
thjanks
karthik -
How to create a Sales order with ref to Contract using Function Module
How to create a Sales order with ref to Contract using Function Module BAPI_SALESDOCU_CREATEFROMDATA ?
We have a unique situation where we like change the sold-to customer of the sales order
once order has been created. These orders have been created using either by function module
BAPI_SALESDOCUMENT_COPY or using BDC (VA01, Copy with reference).
These two processes work abosolutely fine except someone might have change the sold-to
customer of the ship-to customer of the original sales order. If this the case then the new
sales order will be created with the old sold-to and with not the new sold-to.
We tried using BAPI_SALESDOCUMENT_CHANGE and commit afterwards. We checked
the returned parameteres of the BAPIs and they are all successful but sold-to remains the
same old one.
Any help would be much more appreciated. -
How to create user editable Crystal Report with dynamic dataset
What I would like to achieve:
A program loads a report in runtime updates list of database fields (possibly includes sample data), open report in "Crystal Reports 2011" (or 2008) where user customizes report and saves it. Later on the program loads the report, fills actualized data and displays it in .net report viewer.
What I do:
CrReport = New CrystalDecisions.CrystalReports.Engine.ReportDocument
CrReport.Load(TemplateFilename)
Dim Results As DataTable
DataTable is filled from a database
CrReport.SetDataSource(mResults)
CrReport.SaveAs(NewReportPath, True)
The NewReportPath is opened in the default program.
What are the problems
The report is open in preview mode (not in design).
When the field is added to the report the designer asks for XML datasource on preview.The short answer is that it is not possible. I broke the question to other two: How to save a report that it opens without preview? and How to create user editable Crystal Report with dynamic dataset, where it is possible to find details. Key answer is Re: How to create an editable previewable report?
-
How to create a Sales Order through an EDI configuration.
Hi
How to create a Sales Order through an EDI configuration.
Tell me the step-by-step procedure for this.
Any power point presentation would be fine.
Cheers
MaruthiHi,
You can go to these links to know little bit about sales order creation through EDI/ALE by means of IDOCS.
http://www.riyaz.net/blog/index.php/2008/01/19/beginners-guide-to-ale-and-idocs-a-step-by-step-approach/
Sales Order Idoc Extension.
http://www.*******************/2007/11/abap-idocs-basic-tools.html
For any specific information, just do a google search(information like message t ype, IDOC type, Functoin module, etc. You will definitely get the information you are looking for
Please reward if this helps you -
How to create the multiple desktops
Hi,
Can anybody help me out how to create the multiple desktops in weblogic portal.After creating the desktops how to run them.Can you provide me the any document or send me the solution for it. I will be waiting for the reply.Thanks in advance..
Thanks & Regards
Kalyan KurmamHi Kalyan
Please see a post of mine with the info you want and some additional information on what exactly Desktops and Portals are. Hope this helps.
Re: Portals vs Desktop
Thanks
Ravi Jegga -
How to create an Sales Order successfully??
Hi,
How to create an Sales Order successfully??
Why every time i create an Sales Order, there will pop-up an error msg, then i couldnt save the order....
For creating an Sales Order, what kind of data should be prepared?
For example, The material which will be sold should belong to the specific sales area. And the order type should be assigned to this sales area which will be used in the SO.
Do you know what i mean??
Thanks!!
HooHi,
To successfuly save the sales order first sales area should be assigned to document type.
Customer should be extended to sales area.Material should be maintained in sales area.
All the mandatory master data such as pricing,customer,material master should be properly maintain.
Just trace down the errors to solve them...errors give you hint of what is missing.
They are best friends of consultants
Reward points if useful
Regards,
Amrish Purohit -
How to create EDI Sales orders.
Hi ALL,How to create EDI Sales orders,pls explain step-by-step and what are requirements.
Hi
First search in the forum
there are so many threads which are answered on the same topic.
If you search in the forum you will get more replies which have answered perfectly which will olve your problem and also you will learn more.
Just use the search option in the forum
http://help.sap.com/bp_bblibrary/500/Documentation/GX1_Scen_Overview_EN_DE.ppt#4
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/SDEDI/SDEDI.pdf
regards -
How to create Auto . transfer order
Hi Guys
How to Create Automatic transfer order after posting GR wrt PO
What are the settings required for this?Hi,
Please refer the below link
http://help.sap.com/saphelp_45b/helpdata/EN/c6/f83db14afa11d182b90000e829fbfe/content.htm
Regards,
Deepak.
Maybe you are looking for
-
Why PDF's with transparency display incorrectly?
Hi everybody I used this script ( http://www.adobe.com/devnet/digitalpublishingsuite/articles/dps-pdf-to-indesign.html ) to create a magazine based on pdfs but I have a big problem. The imported pdfs with trasparent elements display incorrectly but o
-
Re:why unit of measure is changed in miro
Hi guru's, My user has made a P.O. migo & miro, for the required material P.O. unit is box GR unit is box I.V unit is changed to Pcs. the alternate unit of measure maintained for the said material is Pcs & Box. Can anybody advise me what to do t
-
Suddenly iTouch Won't Let Me Edit
-
Connecting SAP CRM with Xcelsius to generate dashboards
Post Author: ppchandrasekar CA Forum: Xcelsius and Live Office Hi Team, I am new to BOBJ and its components. I want to integerate SAP CRM system with Xcelsius to generate dashboards. As per my understanding only through three sources we can generate
-
Quick Time keeps getting errors
Hey guys, I really want to film my own windows. First, it worked fine, but whenever I tried to erase other videos that I practiced, quicktime player doesn't reply. How can I fix it? I updated my software; it's 10.9.2.