How to Create IView with the HTML Content

Hi Friends,
Give me steps how to create IView with the static html file.
Regards,
Lakshmi Prasad.

Hello thr...
follow the below link for the required steps.
[KM Document iView|http://help.sap.com/saphelp_nw04/helpdata/EN/fc/cf14bcd42911d5994400508b6b8b11/frameset.htm]
You need to upload the document onto KM. Then you will be able to create the KM Document iView.
Cheers!!!
Biroj Patro.

Similar Messages

How to Create Charts with the variable value

Hi,
I have to create a crystal report in which i have given variable under "Facility:". I have kept two variables under facility of which one is like you can select one or more values and other one u can select only one value and i mentioned it as mandatory.
What i wanted is, I have to create a bar chart based on the facility . I also want to create a pie chart using the value of facility which comes from the mandatory variable.
To be more clear, I selected two facilities, say X & Y under the first variable and one facility, say Z under the second variable (mandatory). I was able to prepare bar chart with these three facilities. Now i want to prepare a pie chart using the value Z.
Can anyone please help me out?

Likely a bug in the ChartBuilders or the JDK.
ScatterChartBuilder.<Number, Number>create().build(); // does not work either.javac is unable to determine if the create() method from SceneChartBuilder or the create() method from RegionBuilder should be applied.
The AxisBuilders which also derive from RegionBuilder work because they don't define their own create method with obscure generic type info.
How can I resolve the ambiguity?new ScatterChart ;-)

How to create colums with the same Field

Hello every body,
I have this report only with one field how i can create columns in base of rows for example some times this field containing 40 rows then I need to create 2 columns of 20 that when is even or 15 then create 2 columns one with 8 rows and the other with 7.

you can try making the report layout with multiple section. Please the field in detail section and right cick on the detail section and go to section expert and select the option "format with multiple columns" and then go to layout tab and select the each column width and select the printing direction option as down then across and click on OK.
Now you will be able to see the multi column report.
regards,
Raghavendra.G

How to create search with the keywords

hi guys,
Actually am tryign to create a search engine which will be doing a search on simple txt files.
Now let me explain,
Say am entering a keyword like "hello world" now i need a specific search for the key word i typed, it should list out the output which should show only the files which have the keyword "hello world" doesn't matter the case sensitivity part. Hope u understood wht really am lookin forward.If u have any doubts or any concerns plz get back to me.Please get back to me with some inputs.
thanks in advance
best regards
sandy

The relevant classes are in the java.util.regex package, and the javadocs are pretty good. If you don't know anything about regular expressions, you'll probably need to read up on them--try a Google search on "regular expression tutorial". And if you're really interested, the book Mastering Regular Expressions, by Jeffrey Friedl, is excellent (be sure to get the 2nd edition, which has a chapter devoted to Java regex support).

How to create reports with the prompts like the pre-defined reports ?

We are analyzing pre-defined report: Historical Pipeline Analysis. When executed we can see the prompts for Pipeline Fiscal Quarter and Pipeline Fiscal Year.
If we open this analysis I cannot see how this prompt have been built.
If I save this pre-defined report (without any change) to My Folders and execute it from here, the prompts are gone.
I´d appreciate any help.
Antonio

I have the same issue. The prebuilt reports are actually dashboards, which is why the dashboard prompt filters show up.
I'm not sure how they get it to be a link like that on the reports tab (since the link doesn't point to a dashboard URL ).
Any idea how to get this same effect assuming I built the dashboard/prompt around updated report?

Hi. I purchased a new ipad mini and my brother already has iphone 4,so how can i avoid sharing the same contents that are on his phone? Will creating an other apple id help us in seperating our facetime and icloud accounts as we share our laptop to sync ?

Hi. I purchased a new ipad mini and my brother already has iphone 4,so how can i avoid sharing the same contents that are on his phone? Will creating an other apple id help us in seperating our facetime and icloud accounts as we share our laptop to sync ?

Have a read here...
https://discussions.apple.com/message/18409815?ac_cid=ha
And See Here...
How to Use Multiple iDevices with One Computer

How to create Rules with Flex Field mapping in the bpm worklist

I Have created a flex field label and was able to map to the flex field attributes .
But when i try to create a rules , I don't see the label or the flex attributes in the task payload .
Can someone please help is understanding how to create Rules with Flex Field mapping in the bpm worklist .
Even I am also searching for any scripts which will take the flex fields prompts and can directly create a label in the bpm worklist .
Any pointers or suggestion is highly appreciated .

Hi,
SE38 -> Enter program
Select Variants button and display. In the next screen, enter a variant name, (If not existing , press Create to create new one), else click on Change.
Now the selection screen will display with a button "Variant Attributes" at the top.
Click on that button.
In the next screen, go to the selection variable column of the date field. Press F4 or drop down and select 'D' for date maintenance.
In the column "Name of Variable (Input Only Using F4)" press F4 or drop down, select whichever kind of date calculation you want and save the variant.
Now whenever you run the prgrm with this variant, date will be displayed by default.
Regards,
Subramanian

How to extract the Html content of a UI Map into a text file or html file?

Hi,
Is there any possibility in OUAF or Java or from the Database, to retrieve the Html Content of a given a UI Map ?
If UI Map name is the input, then it should fetch the entire html portion of it into a text file. How to acheive this?
This needs to be done programatically either by writing some Java code or some SQL at the DB level?
Edited by: OATS Explorer on Dec 29, 2012 9:10 AM

F1_MAP.HTML_DEFN would give the html contents and F1_SCHEMA.SCHEMA_DEFN would give you the UI Map's Schema.
SELECT map.map_cd
, map.html_defn
, sch.schema_defn
FROM f1_map map
, f1_schema sch
WHERE map.map_cd = sch.schema_name
AND sch.schema_type_flg = 'F1MP'

How to create an email blast HTML

Ok, I have a couple of my clients emails who I have given me permission to send them an email HTML blast with my specials. How can create one using dreamweaver and send it thru my mac mail program?
I know how to make basic html websites like this one http://www.nrgdesigngroup.com/ I just need to know how to send it with Images thru an email.
thanks

Hi
Here's how I do it:
Create your page as normal, remembering that emails can't contain any flashy stuff like Flash or Javascript (or even animated GIFs sometimes).
Upload the images to your web server (MobileMe/.Mac space will do if you don't have your own) and that they are linked as such in your <img src>es.
To be sure that all can read it (sometimes email programmes have trouble with HTML messages) place a copy of the html on the server too and link to it at the top of the page with something like "If you're having trouble viewing this, please click here".
Preview your page in Safari then select Mail Contents Of This Page from the File menu. This will open a new email in Mail with the HTML embedded in it.
Voila!
Hope that helps
Peter

Collaboration Launch Pad as iview in the Portal content

Hi friends,
i have the following problem. I configured the collaboration launch pad (real time collaboration) and it works fine.
I just don´t want to start the iview from the collaboration link next to the TREX search. Instead of that i need the iview with the user status and the possibility to start an instant message session within the portal content.
Does anyone know if it is possible and what is the name of the corresponding iview?
Thanks in advance
Michael

Hi Michael
Create an new iView (new from PAR => iView) and select the com.sap.netweaver.coll.shared.ui
Create a link in the iView to the contacts:
In the iView properties add in field "Path for Initially Displayed Folder": /alias/%3Cmycontacts%3E
and in field "Path for Start Uri": /alias/<mycontacts>
Hope this helps.
This worked, but I needed also to activate the Tool Area with activated CLP link. I didn't get it work without Tool Area.
Regards,
Stefan

How to create Matrix with Group report layout in xml

Hi,
i would be glad if anyone could tell me How to create Matrix with Group report layout in xml?
Here i am attaching the required design doc
below is the code
select COST_CMPNTCLS_CODE,
-- crd.RESOURCES,
NOMINAL_COST,
cmm.COST_MTHD_CODE,
-- crd.COST_TYPE_ID,
gps.period_code
-- ORGANIZATION_ID
from CM_RSRC_DTL crd,
gmf_period_statuses gps,
CM_MTHD_MST cmm,
CR_RSRC_MST crm,
CM_CMPT_MST ccm
where gps.period_id = crd.PERIOD_ID
and crd.cost_type_id = cmm.cost_type_id
and crd.RESOURCES = crm.RESOURCES
and crm.COST_CMPNTCLS_ID = ccm.COST_CMPNTCLS_ID
and gps.period_code in (:p_period1, :p_period2, :p_period3)
group by COST_CMPNTCLS_CODE, cmm.COST_MTHD_CODE, gps.period_code,NOMINAL_COST
order by 1,2,3,4.
The o/p of the report shoud be as given below
          Period-1     Period-2     Period-3     Period-4
COMPONENT
LABOUR - DIRECT
     Actual     1     2     3     4
     Actual Rate     10     10     10     10
     Standard Rate
     Var%
DEPRICIATION-DIRECT
     Actual
     Actual Rate
     Standard Rate
     Var%
OVERHEAD - DIRECT
     Actual
     Actual Rate
     Standard Rate
     Var%
LABOUR - IN DIRECT
     Actual
     Actual Rate
     Standard Rate
     Var%
Thanks in advance

Your friend is obviously not a reliable source of HTML
information.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Mr.Ghost" <[email protected]> wrote in
message
news:f060vi$npp$[email protected]..
> One of my friends advised me to develop my whole site on
the layout mode
> as its
> better than the standard as he says
> but I couldnot make an ordinary table with rows and
columns in th layout
> mode
> is there any one who can tell me how to?
> thanx alot
>

Problems with the Spry Content Slider Widget in DW6

Hello there,
I have been wrestling with a problem I'm having with the Spry Content Slider Widget that I hope someone has an answer for.
I have 2 widgets on a page, but the problem I'm having occurs whether there is 1 or 2 on the page.
No matter how many slides I have in the widget, it only shows the first 3. The 2 widgets per page occurs on every html page (9 in total.)
In there a setting in the inline or linked .js code limiting the number of slides to 3?
In addition to these widgets, I also use a DWUser_EasyRotator Slider on the pages, and both the easyRotator and Spry Widgets launch a fancyBox jQuery Gallery. Tho it's a possibility, I don't think the mixing of sliders/js is the problem, as I was having the problem with the Spry Widget showing only the first 3 upon the first insert of the Widget.
Any suggestions on settings I should be aware of, as regards the Widget, would be greatly appreciated… (;

On line 66 of your code, you have an extra </head> tag that doesn't belong. Remove that and validate your code again.
http://validator.w3.org/check?verbose=1&uri=http%3A%2F%2Fwww.gallerynumber9.com.au%2Findex ---778.html
Nancy O.

Fetching Dynamic email address from the HTML content sent in the email body

Hi All,
I have a scenario where in i have to send an html content via an email body . while doing so , i need to fetch the email address from the html content and send a mail to the specified email adrress in the html content .
How to fetch the email address from the html content.
Regards
Vinay P.

Hi ,
Dynamic configuration means ...do i need to come up with a mapping which contains the To,From,Subject fields & all...so that when i click on the mail package in mail adapter ...this "To" email id will be fetched dynamically
Regards
Vinay P

Getting the html content before browser displays it

Hi,
I have a nagging problem which i am trying hard to solve.
I have a jsp file which gets hundreds of rows from database. I want to capture the html content before the browser displays that. How can I achieve it. ?
Please tell us the solution as soon as possible. we have stopped the work.
Thanks & Regards,
A S N Murthy
[email protected]
[email protected]

Hi !
continuing with my previous mail...
Is it okay with you if you use save the Data to be rendered in an XML ? (if you just need all the data).
You've written you will have "hundreds of rows from database".
In case you think of saving the data in an XML format, you can have all that data in a structured manner on the server side. And later you could use the XML file in any way you want. i.e. convert it into an html using xalan, etc. or use the XML file to access the data instead of a DB transaction all over again...
I guess this might be a better approach than saving the HTML that will be generated by the JSP.
Anyway, it depends on your requirement.
regards,
Rahul C Tiwary

How to create table with row type in smart forms

How to create table with row type in smart forms with out line type
please explain me the procedure

HI,
A table type describes the structure and functional attributes of an internal table in ABAP. In ABAP programs you can reference a table type TTYP defined in the ABAP Dictionary with the command DATA <inttab> TYPE TTYP. An internal table <inttab> is created in the program with the attributes defined for TTYP in the ABAP Dictionary.
A table type is defined by:
its line type, that defines the structure and data type attributes of a line of the internal table
the options for managing and accessing the data ( access mode) in the internal table
the key ( key definition and key category) of the internal table
The row type is defined by directly entering the data type, length and number of decimal places or by referencing a data element, structured type ( structure, table or view) or other table type. Or the row type can be a reference type.
<b>for more info :</b> http://help.sap.com/saphelp_nw2004s/helpdata/en/fc/eb366d358411d1829f0000e829fbfe/content.htm
Internal table
Regards
Sudheer

How to Create IView with the HTML Content

Similar Messages

Maybe you are looking for