How to create Jump targets
Hi Experts
Here i have one requirement like from bw report client wants to go to r/3 t-code.i created in rsbbs and i activated all necessary services but6 i dont no in assignment details wat to map and how to map in bw side please help in in detail. and is any possibilities are there to go to source system with our asking login id and password. please help me .
regards
anand
Hi
To jump from a BI query to a T-code in R/3 side you need to follow these steps:
In BW :
1. In RSBBS transaction :
If you work with BI7 enter the TAB all queries in infoprovider
If you work with 3.5 enter the TAB infocube
Choose the sender : the infoprovider that the query is using. (You can choose the
Query in the other tab , but then you will have to do all the work
again for every quey in that infoprovider)
Click on the create button , you will get a maintain sender/ receiver screen:
2. Here :
under report type select radio button Transaction
under Target system select radio button Source System (your R/3 ID )
under R eport choose the T-code you want to jump to
click on Transfer button, this will bring you back to first screen.
3. In the RECEPTIENT part of the screen you see a line with the details you assigned in
step 2. You MUST enter in the line one of the infosources (or transformations) for that
infoprovider.
4. In order to limit the transaction to a unique value (this is usual the situation) , you need
to map the BW infoObject to the R/3 field :
Select the line and click on Assignment details button. You will get an assignment screen , here:
Find the BW infoObject that you want to transfer as a parameter to the T-CODE
In the line of that infoOobject , in the Type column choose 3 Table
Field
Enter the Field name(INPUT FIELD)
Select : Parameter in selection type column
Enter Data element and the Domain in the appropriate columns
Do the same for all the parameters you need to map
Close the screen
AND, NO , YOU DONu2019T NEED TO SIGN ON AGAIN !
Make sure that the users have the S_RFC object in their role .
The object has to be defined with : ACTIVITY 16
TRFC_NAME * ( or other)
` RFC TYPE fugr
Check with the people responsible for defining RFC connections and AUTHORIZANTIONS ,
If everything is defined well in order to jump between the systems with a single sign on.
Its not easy but it should work
Rita
Similar Messages
-
ABAP MAPPING Querry - How to create Different Target NODE NAME as of Source
Hi,
In abap Mapping
<b>DATA READ FROM SOURCE XML NODE into <u>incode</u></b> ******
data: incode type ref to if_ixml_node_collection.
incode = idocument->get_elements_by_tag_name( 'BUSINESS_DAY' ).
<b>CREATE OUTPUT XML NODE WITH SAME NAME AS <u>'BUSINESS_DAY'</u></b> **
data: outcode type ref to if_ixml_node.
outcode = incode->get_item( index = 0 ).
data irc type i.
irc = msgtype->append_child( outcode ).
*<b>BUT TO CREATE OUTPUT XML NODE WITH <u>DIFFERENT NAME AS 'BUSS_DAY'</u></b>*
data: ws_val type string VALUE 'xyz'.
data: elementsender type ref to if_ixml_element.
elementsender = odocument->create_simple_element(
name = 'BUSS_DAY'
value = ws_val
parent = msgtype ).
<b>Please guide me how I can assign <u>incode</u> value to ws_val.
So that I can generate <u>OUTPUT XML NODE with different name as of SOURCE XML NODE</u></b>
i.e. How to create Different Target NODE NAME as of
Source with same Data
<Note>: I am using "How to... Use ABAP Mapping in XI 3.0 ver.1.00" and to create different NODE name as of source
is not given in it.
Thanks & Regards.Hi ABAPers,
Please Guide Me .....
<u>This is ABAP Mapping problem in XI.</u>
<b>How can I read data from incode into ws_val.</b>
data: <b>ws_val</b> type string
data: <b>incode</b> type ref to if_ixml_node_collection.
<b>incode</b> = idocument->get_elements_by_tag_name( 'BUSINESS_DAY' ).
Best Regards -
How to create data target contents.
hi sap gurus,
Please guide how to create metachains on cube or ods having the following options
1.Complete Deleteion of DATA target content.
2. execute infopackage.
plz help me as soon as possible.And aslso please forward dome process chain documents.Hi,
You can find the process types Complete Deleteion of DATA target content & Execute infopackage in ur process chain maintancence screen. Just drag & drop & create a process chain as per ur data flow.
<u>Check this doc for process chains</u>
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/8da0cd90-0201-0010-2d9a-abab69f10045
<u>help.sap </u>
http://help.sap.com/saphelp_nw2004s/helpdata/en/8f/c08b3baaa59649e10000000a11402f/frameset.htm
<u>Check these docs also</u> https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/19683495-0501-0010-4381-b31db6ece1e9
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/36693695-0501-0010-698a-a015c6aac9e1
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9936e790-0201-0010-f185-89d0377639db
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3507aa90-0201-0010-6891-d7df8c4722f7
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/263de690-0201-0010-bc9f-b65b3e7ba11c -
Hi,
we have a webreport and when the user clicks on Material number it should go the R/3 system related table.
I am looking for SAP how to document on Jump target from a query to R/3 system and can anybody help suggest me a step by step?
ThanksHello,
See this doc [Report to Report Interface for SAP Business Information Warehouse 3.0|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6eb89190-0201-0010-89bf-ad46d1503ef9]
Thanks
Chandran -
How do create jumps to other topics from a WebHelp proj linking to word docs?
How do I create jumps to other topics in a WebHelp proj that links to other word docs?
Can you please confirm that you want to link to Word files and where these files are? Also if they are external to your RH project, where they reside. The answrs to these questions will help us help you.
-
How to create/assigh Target Group while creating Marketing Plan in CRM 6.0
Hi all,
I am new to this field and would like to know that how can we assign the Target Group ( business Partners ) in the Campaign while creating a Marketing plan.
It will be really handy for me if I get the detail steps to execute.
Regards,
ZenHi,
perhaps this can help you:
http://help.sap.com/saphelp_crm60/helpdata/en/32/ad6f422f91c153e10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_crm60/helpdata/en/46/0abec5abb314dce10000000a155369/frameset.htm
This describes step by step what you have to do to create a marketing plan / campaign.
Regards,
Claudia -
How to create an target audience to be used in a list or navigation?
Hello,
I created a new SharePoint group called "test" and added an Active Directory Security Group to it. I used "test" for the Target Audience on a menu item, but the link still showed up on the page with a user who is not in the Active
Security Group. Is there something that I am missing? I have a list of links and some navigation links that I like to be hidden from users who don't have access to them.
Any suggestions on how to hide the link based upon an AD security group?
Thanks,
PaulHi Paul,
From your description, I understand you would like to target audience on a navigation link.
I assume you have created SharePoint group "test" and certain users don't have access to the list, please follow these steps below:
Before you targeting an audience on a link, make sure you have removed this link from the Recent.
Click gear icon -> Site settings -> Look and Feel, Navigation.
Find the section “Structural Navigation: Editing and Sorting” in Navigation Settings page, you can add link in the navigation or edit an existing link.
Add SharePoint group test in the target audience box.
You can refer to the article below to target list or library items to an audience:
https://support.office.com/en-us/article/Target-content-to-specific-audiences-33d84cb6-14ed-4e53-a426-74c38ea32293
Regards,
Rebecca Tu
TechNet Community Support -
How to create a target for a hyperlink?
I have a pdf with hyperlinks to urls. if someone views my pdf through a browser and clicks on the hyperlinks, the browser will load the url in the same window. How do I give a hyperlink a specific target, like _blank which would open the url in a new window.
thanks- any help is appreciated.Hi,
if your using 5.0 then you must be using SAP GUI for segmentation, as vivek said you have to create CSV file with only column BP id.
1.Create profile set from Txn : CRMD_MKTSEG
2. Right click on staging area and create (Create TG) empty TG
3. Select TG and right click and import your file
4.Select file name, mentioned seperator, select business partner column
after this it should create TG with BP id mentioned in CSV file, i tried this it gives me expected result.
Regards,
Dipesh. -
How to create a target group with all prospects?
Hi guys,
I am wondering how do I have to set up my data source when I would like to build a target group in my segment builder which includes all persons/contacts/organizations with the bp role prospect?
Which infoset do I need to choose in my data source? What do I need to fill under details?
Thanks a lot for your help.
Best regards,
JanineHi Janine,
What I could understand is that you require to create target group of all BPs having BP role as prospects.
To do so, you can create an infoset joning tables BUT000 and BUT100. The table BUT100 , has a field "BP Role"->select it, so that it is available when you are creating the attribute list using this infoset.
Create a data soucre for this infoset. Then when creating a attribute list, include this datasource and under this select the attribute "BP Role". Add filter to this attribute for prospects.
This filter can be used in segmentation builder in UI to create TG containing BPs having BP role as prospect.
Hopes this helps you.
Thanks,
Apoorv -
How to create Jump Queries --Report to Report interface
Hi
My requirement is to create a Jump Queries in BW
How can i link 2 Queries in BW...so that when User executes Report 1 then if he want he can able to jum to Report2 for a detail information from report 1
and
How can i create a Jump from Report1 to R/3
Thanks in advanceHi BW user,
Go through these links.
http://help.sap.com/saphelp_nw04/helpdata/en/91/d2b0fc58952b46827453498c8420ad/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/e3/156e3fefa13042e10000000a114084/content.htm
This article would also help
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/6eb89190-0201-0010-89bf-ad46d1503ef9
Regards,
Sunmit. -
How to create iSCSI target using the entire drive?
This sounds silly, but after setting up the DL4100 in RAID 5, I could not assign the entire 11.89TB to an iSCSI target... Only integer numbers seem to be the valid input. And the only choice of TB or GB offered no help because I could not enter: 11890 GB either?! What am I missing?
Thanks to all who have responded....
Here's my take: 4TB x4 in RAID 5 = 11.89TB but via iSCSI creation will result in 0.89TB unallocable to iSCSI due to the GUI disabling non-interger values (ie: no decimal points). That is 890GB of storage that is supposedly used for firmware upgrades, logs, etc?!
Snooping around I noticed that the validation is only performed via javascript and a quick re-POST to the unit of the params can trigger modification/creation of a non-integer iSCSI volume sizes. Please note that you can only grow volume sizes and not shrink them! Below is a walk-thru of how to do this:
Disclaimer: *WARNING: USE AT YOUR OWN RISK*
1) Create the iSCSI volume as per normal but at the integer value less than what you intend (eg: if you wanted 1.5TB, create 1TB) then wait for the iSCSI volume to be created.
2) Use a web browser with debugging turned on and capturing traffic. For my example I am using Firefox and hit F12 to fire up the debug tool. Pick "Network" and you will see Firefox start picking up all traffic to the DL4100.
3) Go into the iSCSI volume and choose "Details" to modify it. Put the current size as the modified size and click "Apply". Look in the list of messages to locate a POST message "iscsi_mgr.cgi" that has a Request body with a "size" parameter and select that to be resent.
4) In this copy of the same message, look in Request Body and the list of parameters being passed back to the unit. You should find one of the parameters called "size". This value is sent to the unit in GB... Change the value to a GB value that you desire (eg: 1TB would appear as "1000", so you can change it to "1500" for 1.5TB) and then re-POST this POST message back to the unit.
5) Wait for the update to transact and verify that your iSCSI volume has indeed been resized to a "non-Integer" TB value.
That's it! I hope this helps others who have been trapped by this limitation. Please be mindfull not to allocate all your dive space since as Bill_S has mentioned, some space is required by the system for its own housekeeping operations.
Good Luck! -
[Solved] How to create multiple target nodes from single input node (XSL)
Hello all,
I have identified what I think is a bug in the visual XSLT mapper (JDev 10.1.3.3). Here is the simplified scenario:
I have a source XML file that contains a bill-to address and a ship-to address, something like this:
<header>
<bill-to-name>My Customer Bill To</bill-to-name>
<bill-to-address>123 main street</bill-to-address>
<ship-to-name>My Customer Ship To</ship-to-name>
<ship-to-address>567 first avenue</ship-to-address>
</header>I want to translate it to a target XML file that looks like this:
<addresses>
<address>
<address-type>BILLTO</address-type>
<name>My Customer Bill To</name>
<street-address>123 main street</street-address>
</address>
<address>
<address-type>SHIPTO</address-type>
<name>My Customer Ship To</name>
<street-address>567 first avenue</street-address>
</address>
</addresses>Note that what I am trying to do is to create two nodes in the target (something like a for-each), but where there is no repeating node in the source.
I was able to do this quite simply with a map like this:
<xsl:template match="/">
<ns2:addresses>
</ns2:address>
<ns2:address-type>
<xsl:text disable-output-escaping="no">BILLTO</xsl:text>
</ns2:address-type>
<ns2:name>
<xsl:value-of select="/ns1:header/bill_to_name"/>
</ns2:name>
<ns2:street-address>
<xsl:value-of select="/ns1:header/bill_to_address"/>
</ns2:name>
</ns2:address>
</ns2:address>
<ns2:address-type>
<xsl:text disable-output-escaping="no">SHIPTO</xsl:text>
</ns2:address-type>
<ns2:name>
<xsl:value-of select="/ns1:header/ship_to_name"/>
</ns2:name>
<ns2:street-address>
<xsl:value-of select="/ns1:header/ship_to_address"/>
</ns2:name>
</ns2:address>
</ns2:addresses>
</xsl:template>As long as I only use the source view for the xsl file, this works fine and tests just fine. As soon as I switch over to the graphical (design view), the source gets mangled to:
<xsl:template match="/">
<ns2:addresses>
</ns2:address>
<ns2:address-type>
<xsl:text disable-output-escaping="no">BILLTOSHIPTO</xsl:text>
</ns2:address-type>
<ns2:name>
<xsl:value-of select="/ns1:header/bill_to_name"/>
<xsl:value-of select="/ns1:header/ship_to_name"/>
</ns2:name>
<ns2:street-address>
<xsl:value-of select="/ns1:header/bill_to_address"/>
<xsl:value-of select="/ns1:header/ship_to_address"/>
</ns2:name>
</ns2:address>
</ns2:addresses>
</xsl:template>which obviously does not work.
So:
1). Should my original map work? If not, what is the correct way to do it?
2). If the map should work (it does), this looks like a bug in the design view.
3). If my map should work, is there a way to do this in the design view?
Kind regards,
JohnJohn,
GUI has limited functionality and hence it does not support all the constructs. If you want to implement soln that is visible in gui follow this steps.
for-each(bill-to-name)
create <address>tag
map concat(BILLTO) to <address-type>
map value of <bill-to-name> to <name>
map value of <bill-to-address> to <street-address>
select the for-each you created - right click -> add xsl node ->clone for-each
repeat similar steps for mapping <ship-to_name>...etc
If you still unsure send me the source & target xsd and I will send the xsl your way. You can email me at [email protected]
Dipal -
How to create a target flat file in a mapping?
Hi,
I defined a Target location tar_loc (D:\target), a file modul and a file with location tar_loc and file name target_file.
In a mapping I try to use this file as a target.
After validating I get the message: VLD-2357: The name of the target file for target_file is missing.
What to do?
Thanks
AndreasHi Andreas
Set the target data file name when you configure the mapping on the file ooperator, see;
http://blogs.oracle.com/warehousebuilder/2007/06/some_tips_and_hints_about_xml.html
Also this one is interesting for dynamic file names;
http://blogs.oracle.com/warehousebuilder/2007/07/dynamically_generating_target.html
Cheers
David -
Mass upload in Jump targets(urgent )
Hi Experts,
In creating Jump targets in RSBBS..let me know the option to have a mass upload multiple selection in jumping from one query to another.
I mean that when we go to another query(receiver) from the result area of the first(sender) how would be the selections in these? also is there any option to have a mass upload to the selections of the receiver query from the first.
I know that it takes single values when we click on a single row and when we click on the column it takes the entire valus for selections.
Also how can i view the selection screen of the receiver query.
Can anyone help me in this regard.
Regards,
Rambo.
Message was edited by: Rambo sawh
Message was edited by: Rambo sawhHi,
try the following:
1. make the variables of receiver as mandatory / ready for input
based on your query, BW should display the variables of receiver...there you can add if you need more input...
hope this helps -
TCODE / Menupath for creating a target group
Hi All,
What is the transaction code/menupath to create a target group of business partners?
How to create a target group of the selected business partners using that tcode/menupath?
Please let me know.
Thanks in advance.
--R DHi RD,
Transaction code:CRMD_MKTSEG
Menu Path: SAP Menu->marketing>segementation->marketingsegments--->segment bulider
SAP Help link: <b>http://help.sap.com/saphelp_crm40sr1/helpdata/en/db/58963eac416f01e10000000a114084/frameset.htm</b>
Regards,
Arjun
<b>Don't Forget Rewards points if it helps</b>
Message was edited by:
Arjun Pawar
Maybe you are looking for
-
Takes long time to open exported HTML
I've set up my exported HTML captivate project to run after 10% is loaded, but I'm seeing strange/funny behavior: -Preload screen shows for approx 10 secs (this is fine) -Then first slides is displayed (good so far) -Then everything hangs for 45-60 s
-
How do i transfer my Acrobat Pro 10 from computer which dies to new unit?
How do I transfer my Acrobat Pro 10 from one computer which dies to my new one. I have serial number and am original buyer. Thx Jim
-
Has this always been like this?
I have just noticed that asking to be taken to the last message of a thread takes one to the last edited post, not to the last posted message. Also, the edited message shows its original time in the list, but the date and time of the last edit when o
-
Cannot see existing Business Rules in Hyperion Planning ?
Hello, I'm working on Planning 9.3.1.2 : I've developped several Business Rules with the EAS console (theses HBR are attached to a project). But when I open the application in Hyperion Planning with my admin accounts. I can't see any Business Rules i
-
Error-code when launching Time Machine from MacBook Pro
I´ve get this error-code when launching Time Machine: An unaspected error has acourd (errorcode -6584) Solution on this?