How to create Labels with continuous numbering?
I would like to create a page of labels, each label has a number in it, and must be incrememnted by one, so a page might have labels numbered 29 through 38 (10 labels per page). I would like to set the page up so that I only need to enter the first label number, and the rest of the labels adjust accordingly. Is this possible?
Thanks!
~Mike
You can do this with a work around.
See Numbered Tickets:
http://www.freeforum101.com/iworktipsntrick/viewtopic.php?t=182&mforum=iworktips ntrick
Alternatively you can use a Table. Pages will sequence numbers in a table if you enter any kind of a sequence(including dates, days, months etc), in two successive cells, select both and drag out the bottom right white dot to folowing cells.
Peter
Similar Messages
-
How to create labeled table of Content with expand and collapse
Hi All,
Can somebody help me how to create labeled table of Content with expand and collapse as example given below:
User1
Template1
Template2
User2
+
User3
Template1
Template2
Like when we see expand (+) and collapse (-) button when we click on 'about this page' link.
Thanks
BhupendraHi,
Tou can use Table inside table to show the details this way but I'm not sure about Expand/Collapse.
Expand/Collapse are part of HGRID.
I think we can develop this functionality with little manipulation.
Regards,
Reetesh Sharma
Edited by: Reetesh Sharma on Jun 28, 2010 4:56 AM -
How to create Rules with Flex Field mapping in the bpm worklist
I Have created a flex field label and was able to map to the flex field attributes .
But when i try to create a rules , I don't see the label or the flex attributes in the task payload .
Can someone please help is understanding how to create Rules with Flex Field mapping in the bpm worklist .
Even I am also searching for any scripts which will take the flex fields prompts and can directly create a label in the bpm worklist .
Any pointers or suggestion is highly appreciated .Hi,
SE38 -> Enter program
Select Variants button and display. In the next screen, enter a variant name, (If not existing , press Create to create new one), else click on Change.
Now the selection screen will display with a button "Variant Attributes" at the top.
Click on that button.
In the next screen, go to the selection variable column of the date field. Press F4 or drop down and select 'D' for date maintenance.
In the column "Name of Variable (Input Only Using F4)" press F4 or drop down, select whichever kind of date calculation you want and save the variant.
Now whenever you run the prgrm with this variant, date will be displayed by default.
Regards,
Subramanian -
What is meaning of Labels, what is their purpose, how we create labels
what is meaning of Labels, what is their purpose, how we create labels.
To create labels in SAPSCRIPT, you will have to define multiple MAIN WINDOWS in the Page Window.. try the following steps..
Main windows in page windows allow you to format text in multiple columns. Define an area in the page window, in which to position the main windows.
1. Create a page window and assign it to a page.
2. Choose Edit --> Main windows.
A dialog box appears.
3. Enter values in the fields Area width and Area height in accordance with the input guidelines for main windows.
4. Enter values in the fields Spacing and Number in the Horizontal group if you want to use multiple columns. You can ignore the fields in the Vertical group.
5. Determine how many columns and line areas are required for label printing. Then enter the corresponding values in the fields in the Horizontal and Vertical groups. -
How to create complaints with reference to ECC Billing document (CRM 7.0)
Hi experts!
I use ECC 6.0 and CRM 7.0.
I have to create CRM complaints (ZCLR - CLRP) with reference to ecc billing documents.
I read the following topics and help:
1. How to create complaints with referenceto ECC Billing document
2. Re: How can we transfer billing documents from SAP ERP to CRM 2007?
3. http://help.sap.com/saphelp_crm70/helpdata/en/46/029ba32e675c1ae10000000a1553f6/frameset.htm
Made these settings:
1. Define the Business object type
Goto SPRO>CRM>Transaction>Settings for Complaints>Integration>Trnsaction Referencing>Define Object types for Transaction reference
2. Assign Business Object Types to Transaction Types
Goto SPRO>CRM>Transaction>Settings for Complaints>Integration>Trnsaction Referencing>Assign Business Object Types to Transaction Types
3. Implement a BADI - CRM_COPY_BADI_EXTERN.Check Implementation CRM_COPY_BADI_BILLDO for more information on the coding for referencing the ECC Billing document.
Goto SPRO>CRM>Transaction>Settings for Complaints>Integration>Trnsaction Referencing>BAdI: Create Complaint with Reference to External Transaction.
but still do not know,
1) if I should pre-replicate billing documents into CRM ?
2) Or, the system uses the RFC to find these documents in ECC to create reference?
Please help me.
Best regards Kostya.
Edited by: Kostya Khveshchenik on Oct 20, 2010 2:09 PMnot resolved =(
Edited by: Kostya Khveshchenik on Nov 19, 2010 8:50 AM -
How to create Matrix with Group report layout in xml
Hi,
i would be glad if anyone could tell me How to create Matrix with Group report layout in xml?
Here i am attaching the required design doc
below is the code
select COST_CMPNTCLS_CODE,
-- crd.RESOURCES,
NOMINAL_COST,
cmm.COST_MTHD_CODE,
-- crd.COST_TYPE_ID,
gps.period_code
-- ORGANIZATION_ID
from CM_RSRC_DTL crd,
gmf_period_statuses gps,
CM_MTHD_MST cmm,
CR_RSRC_MST crm,
CM_CMPT_MST ccm
where gps.period_id = crd.PERIOD_ID
and crd.cost_type_id = cmm.cost_type_id
and crd.RESOURCES = crm.RESOURCES
and crm.COST_CMPNTCLS_ID = ccm.COST_CMPNTCLS_ID
and gps.period_code in (:p_period1, :p_period2, :p_period3)
group by COST_CMPNTCLS_CODE, cmm.COST_MTHD_CODE, gps.period_code,NOMINAL_COST
order by 1,2,3,4.
The o/p of the report shoud be as given below
Period-1 Period-2 Period-3 Period-4
COMPONENT
LABOUR - DIRECT
Actual 1 2 3 4
Actual Rate 10 10 10 10
Standard Rate
Var%
DEPRICIATION-DIRECT
Actual
Actual Rate
Standard Rate
Var%
OVERHEAD - DIRECT
Actual
Actual Rate
Standard Rate
Var%
LABOUR - IN DIRECT
Actual
Actual Rate
Standard Rate
Var%
Thanks in advanceYour friend is obviously not a reliable source of HTML
information.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Mr.Ghost" <[email protected]> wrote in
message
news:f060vi$npp$[email protected]..
> One of my friends advised me to develop my whole site on
the layout mode
> as its
> better than the standard as he says
> but I couldnot make an ordinary table with rows and
columns in th layout
> mode
> is there any one who can tell me how to?
> thanx alot
> -
How to create PDF with Form Builder (T-Code:SPF) and how to use it?
How to create PDF with Form Builder (T-Code:SPF) and how to use it? Is there anyone can show me some doc. or PA material ? << removed >> Thank you very much!!
Edited by: Rob Burbank on Nov 11, 2010 1:04 PMPDF forms also known as Adobe From or Interactive Forms.
Check this link -
Interactive Forms
REG:ADOBE FORM
Adobe forms
Regards,
Amit -
How to create folder with sub folder ?
How to create folder with sub folder ?
Hi,
Questions. 17 / 17 unresolved -> very bad reputation
but ok - let's help anyway ...
1. create everything in Screen Painter
2. set FromPane and ToPane property correct.
example:
Items in MainFolder: FromPane & ToPane: 1 to 3
Items in SubFolderA (From 2 To 2) - SubFolderB (From 3 To 3)
shouldn't be that difficult
in your Code set oForm.PaneLevel when the user clicks on the Folder
lg David -
Hello everybody,
It's my first time using Java Card ^_^,I want to create a file and fill the fill with binary data.but i don't know how to create file with APDU commands,so I need help here.
I think that there must be a Manual of the JavaCard's OS in this world,can someone tell me where to download it??
Thanks.
the fllowing is my card:
Samsung S1
Model:TiEx-32J
EEPROM size:32k
Platform Version:OP 2.0.1
Card Manager Status:OP_READY
KMC:40~4F/No derivation
Message was edited by:
AllenHuangIf you look around the forum for a bit, you will see that there is no notion of file systems on JavaCards (lexdabear posted this information less than two hours ago :-)). To store files, you will have to write an applet to hold byte arrays of the required size and handle receiving and sending of these.
As for documentation, you should have a look at the GP (General Platform) specification at http://www.globalplatform.org/, which defines communication between smart cards and other devices, as well as Sun's own JavaCard pages (http://java.sun.com/products/javacard/), which contain several useful resources on JavaCards.
Message was edited by:
Lillesand -
How to create Vector with reference to Collection
hello experts,
can someone let me know how to create vector with reference to Collection interface.
Collection is an interface. and we cant create an instance of it. i'm not clear of what to pass in that constructor.
Vector v = new Vector (Collection c);
what are the possible objects of 'c'
post some example code please.
thanksEver heard of reading the javadocs?
"Collection is an interface. and we cant create an instance of it." - you don't understand interfaces, then.
// I certainly can create a Collection - here's one
Collection c = new ArrayList();
// Now I'll add some Strings to my Collection.
c.add("foo");
c.add("bar");
c.add("baz");
// Now I'll make a Vector out of it.
Vector v = new Vector(c);% -
How to create parameter with multiple selection in a query (SQ02) ?
Hi Exports
Do you know how to create parameter with multiple selection in a query (transaction SQ02)?
thanks.Hi
i know how to create user parameter at SQ02,
the question is how to create multiple selection parameter? -
How to create database with ASM
HI
How to create database with ASM?
I install vmware workstation on window XP .On virtual machine install Linux 5 enterprise (Oracle) install.
I install oracle DB software only. Also make 3 disk for ASM .
1 -- When I want to install oracle DB with ASM . In this process candidate disks not show . Why?
How I can see disks ..
so I simple install oracle DB software only.
2 -- Now I want to create database with ASM by DBCA .
What process I will follow ?
Please guide me
ThanksHi
Steps to create database with ASM.
1.Install oracle binary with active CRS(For single node installation CRS is activated when you run root.sh) .
2.Create disk without file ssytem.
3.Assign disk to raw .
4.Change owner and permission to raw devices.
5.Configure ASM manually or USing DBCA.
Manually ASM Configuration.
a.Create initialization parameter file and password file.
b.Mandatory parameter is "instance_type=asm" as per your need configure rest of parameter like db_cache_size,large_pool_size,processes,remote_login_passwordfile,shared_pool_size etc..
c.To discover disk configure "asm_diskstring=/dev/raw/raw*"
Using DBCA to configure ASM.
1.In storage type section choose ASM.It will ask for password of sysdba in 10g.
2.ASM configuration window will open -> here it create disk group -> it shows all available ASM candidate disk automatical -> choose normal redundancy,external redundancy or high redundancy.
ASM disk also can be conbfigured with ASMLIB .
If ASM disk is configured you can start asm instance in nomount state and query to v$asm_disk to see all candidate disk.V$asm_disk only shows disk which is configured in asm_diskstrings.
Hope this will help U,
Tinku -
How to create CATALOG with MS SQL Server?
Connection class has getCatalog(strCatalog) method. In order to use it, we must create CATALOG in Database?
How to create CATALOG with MS SQL Server?
Help me, please!!!You do not create these for any database, this is part of the Connection metadata.
The Catalog is the third level of table-like database object qualification as in "Catalog.Schema.Table". For SQLServer the qualification scheme is "Database.Owner.Table" and I would be surprised if they reported anything for the current connections getCatalog() method call.
What many people do is avoid table qualification altogether by setting the connection's context in a database proprietary manner and then keeping the SQL as clean as possible. For many ODBC and JDBC drivers this can be set in the configuration. For MS SQLServer you can also execute a "USE dbname" statement on the connection to avoid table qualification. -
PPR Report ,How to display Label with TOTAl
Hi,
How Can i display PPR Report ,How to display Label with TOTAl like
[http://apex.oracle.com/pls/apex/f?p=267:30:]
Thanks
Edited by: 805629 on Jan 6, 2011 3:34 AMHi,
For PPR Report:
Select "Yes" in "Enable Partial Page Refresh" item of "Layout and Pagination" region in Report Attributes of that report.
For display Label with TOTAL:
Use "Break Formatting" region in Report Attributes of that report.
Regards,
Kartik Patel
http://patelkartik.blogspot.com/
http://apex.oracle.com/pls/apex/f?p=9904351712:1 -
How to Create IView with the HTML Content
Hi Friends,
Give me steps how to create IView with the static html file.
Regards,
Lakshmi Prasad.Hello thr...
follow the below link for the required steps.
[KM Document iView|http://help.sap.com/saphelp_nw04/helpdata/EN/fc/cf14bcd42911d5994400508b6b8b11/frameset.htm]
You need to upload the document onto KM. Then you will be able to create the KM Document iView.
Cheers!!!
Biroj Patro.
Maybe you are looking for
-
How big an external hard drive should I buy?
I am being told (by my computer) that I need to backup all my files - that there is a problem with the computer's internal hard disk. I thinkn I should run out and buy an external hard drive (What? you don't ALREADY have one? I think I head you all
-
My macbook pro I7 does not have 802.11n compability
Hello you all. My macbok pro I7 was bought since 8 months ago and is this: Macbook Pro Information Nombre del modelo: MacBook Pro Identificador del modelo: MacBookPro9,2 Nombre del procesador: Intel Core i7 Velocidad del procesador: 2,9 GHz
-
Hi, I want to ask if there is a way to write the rman commands in PERL such that I won't have to redirect the commands to an external file? Is there a module that can be used similar to DBI for sql statements? Thanks!
-
i tried to restore it and it said the an unknown error has occured, error 3194.
-
OS X Snow Leopard restore disks from different conputer.
I bought a new 13 in. Macbook. The Box got thrown out while I wasn't home, and without anybody checking to see what was still in it. There was the manual, the extension chord and the OS X Snow Leopard and Ilife restore disks. I bought some restore di