How to create line tool in edit workspace

I got my new Element 9.  However, I could not find the line tool which should be at the tools workspace.  Coudl some one advise me how to ge the line tool and where it is located.  Thanks,
Andrew Lau

It's in with the other shape tools. Click the blue rectangle and choose from the popout menu:

Similar Messages

  • How to create a secure & non editable PDF? So that it cannot be modified by any of the secondary too

    How to create a secure & non editable PDF? So that it cannot be modified by any of the secondary tools available online for security breaks and editing of PDF document
    I put all the security options but still there are tools to break the security (even password) leading to editing of document
    Need to avoid any such situation

    If the document is important, and there is something to be gained by modifying it - then someone will just make a new copy of it (e.g. print and scan, screen capture), and make a new document, then change it.
    If protecting the integrity of the document - proving it is unchanged - is the thing, look at digital signatures. Forget security, the signed file can be freely edited, but the signature will always show it is changed.

  • How to create line chart

    Hii Experts,
    How to create line chart?
    I want to  prepaire a line chart in a report. i have 1 table. In a table have 2 fields. chart is created in these 2 field refrence how It's possible?
    Thanx in Advance
    Regards
    Vshal

    I found it very easy to produce a line chart in a window container using FM GFW_PRES_SHOW.  In my case this produces a basic line graph with three lines across 15 time periods.
    See transaction GRAL for various chart types...they're relatively easy to produce...  I picked DEMO_GFW_PRES_SHOW report program from GRAL as my example for how to produce a simple line chart very quickly.

  • How to create a table with editable column values.

    Hi everyone,
    I think this is very simple but i'm not able to find how to do this. This is my requirement. I need to create a table with n columns and 1 row initially. user should be able to enter data into this table and click of a button should insert data into the data base table. Also there should be a button at the bottom of the table to add 1 row to the table.
    I know how to do the insert to database, but can anyone please let me know how to create a table that allows user to enter data and how to create a add 1 row button?
    Thanks in Advance!

    Raghu,
    Go through the ToolBox tutorial Create Page & Advanced table section of OAF Guide.
    Step 1 - You require to create EO & a VO based on this EO. This EO will be of DataBase table where you want to insert the data.
    Step 2 - Create a Advanced table region. (Refer this Adavanced table section for more on this)
    Step 3 - Attach this VO in the BC4J component of Adavanced Table region.
    Regards,
    Gyan

  • How to create line in smart form

    dear all,
            i hv to create lines in smartform.
    BOX XPOS '0' MM YPOS '6' MM HEIGHT '0' MM WIDTH '190' MM FRAME 1 PT
    by using above statement i can create line in SAPSCRIPT.
    is there any similar statement in smartform to create lines
    if So plz send me a code.
    regards
    Vinod.

    create window and provide these parameters  in the output options to get the line. and  in  line  select check box line with                                                                               
    Left margin          0.00      CH    Width           80.00       CH   
      Upper margin     12.50      LN    Height             0.05       LN                                                                               
    line
       check the box  line with                                                                               
    Gray value       0   %     
       Width                     1.00       TW                       (0% = not filled)          
       vertical spacing       0.00       CM                                
       horizontal spacing   0.00       CM

  • How to create line indesign sdk?

    hi,
       I had created line but i cannot able to set length for this line,pls help me.
    here my code is,
    UIDRef lineRef=Utils<IPathUtils>()->CreateLineSpline
    (spreadLayerUIDRef,points,INewPageItemCmdData::kDefaultGraphicAttributes,kTrue,Transform:: InnerCoordinates());
    thanks,
    vijay.

    Hi,
    If the requirement is on a small scale and u have only a few no of users (To Restrict) and only a few forms, what i did was
    1.Get the curently logged in user.
    2.Check if he is a restricted user.
    3.Check if the form opened is a restricted form for the user.
    4.Then on the form load or on the ITEM (UID 1) make bubble event to FALSE and show msg that the  user is not supposed to make the changes.
    This is what i did as mine was limited to only some forms...:)
    Hope this helps u..
    Vasu Natari.

  • How to create one user for one workspace

    Hi experts,
    I just wanted to know if anyone of you ever generated a user in a 11g database who only is able to see the content of one specifc workspace.
    The workflow would be that an admin-like user generates a new workspace and after this he creates a new user who can only see/change the data in this workspace.
    So when the new user is logging in, he is automatically in this new workspace and he has no priviliges to merge/create/rollback workspaces, or to change into another workspace.
    Could anybody please give me a hint on how to achieve this?
    Regards,
    Jens

    Hi Jens,
    Along with granting privileges on the specific tables, you would need to grant ACCESS_WORKSPACE using dbms_wm.grantWorkspacePriv on the specified workspace. Without granting any other privileges, the user would not be able to create additional child workspaces, or merge/rollback the workspace. Then, you would need to create a logon database trigger that places the user in the appropriate default workspace.
    However, a user is always able to access the LIVE workspace. There currently isn't any way to prevent that.
    Regards,
    Ben

  • How to create database in express edition

    I have downloaded and installed Oracle10g Express edition. As the tutorial suggests using windows /start/all program/oracle10g Express edition/go to Database home page, I am able to login as well.
    My problem is How can I create a new database in oracle 10g express edition,
    I want learn to create and manage a small database on this software.

    You are aware that XE comes with a "seed db" that is restored during the installation process, right? If you try creating your own database, you'll lose at least the management user interface, since there are no seperate install files for APEX. One could of course try to install the APEX package that is provided for other database versions, although I'm not sure if that would work. Hmmm, there's a thought ...
    C.

  • How to create line?

    I cant finds solution to create visible line in proscenium. There are examples that are using SceneAxes and SceneGrid but i need to do simple line.
    I did somethin like line=Line.createLine() and added it to scene but it was not visible to camera.
    Can you give me a hint how to use it? Should i implement special render function or something?

    Thanks - the Flip Count Live Font should be fine for the effect I was looking for!
    Best wishes,
    Angus

  • How to create line hart with variable number of data series

    Hello,
    I am student and I am completely new to Flex programming but
    I need to urgently create an app that should have a variable number
    of data series but of ame type of object.
    eg. Profits for X,Y and Z in in run while just corp X in the
    next instance.
    How can I accomodate for this in the app? can someone point
    me in the right direction I would really greatful as this project
    is really crucial for my coursework to get finished in timely
    manner.
    Thank you

    Hey,
    I'm not really sure what you want, but you should check out:
    http://demo.quietlyscheming.com/ChartSampler/app.html
    Which has a list of different types of charts in Flex and
    will hopefully help. Also check out charting from ILOG, which is
    quite good:
    http://www.ilog.com/products/elixir/

  • How to create icon/ tools?

    Till this time I used to work mainly with photoshop regards to creating web sites, or adjust photo, photo manipulation etc. Now I ve got a very nice task ahead of me- to design minimalistic outline icons set- aproximetely around 10icon for web design.
    Stuggling which tool I should use- I need realy nice curves to reach nice sexy icons:)
    What kind of tool and technics are you guys using when you are designing icons?
    like those?
    http://othericons.com
    thank you so much!

    You may want to check out Illustrator, because to me at least that looks like a task that would benefit from being done with vector data (even if it may be converted to pixels later on).

  • At wits end on how to use line tool as guide?  Not even sure if correct.

    I have been trying for hours but maybe it just isn't possible.  This would seem to be the simplist way to do but maybe a better way?
    I have an area of a subject that I am trying to divide into four triangular segments.  I need to shade each area seperately.  I have drawn two individual lines that intersect, giving me the required shaped spaces.  Nothing was allowing me to work within each area until I used the magnetic lasso to individually select a quadrant.  Once I did so I was able to fill the quadrant with color.  The problem is when I hide the layer that was created just for the line, (because I DON'T want the line in the picture,) my entire result disappears, the line AND the color.
    I have tried many different ways to do this, I can't even list them all.  The program automatically created a shape layer for each line.  If I hide one of the shape line layers I can still see the result but when I hide the second line shape layer the shaded area and the line go away.
    What am I doing wrong?  Is there another way to accomplish what I want to do?
    Thank you very much fellow adobities.

    Moon52 wrote:
    I'm wondering if when I create the layer for the line shape I need to do a separate layer for the actual shading?
    You don't have to (see my previous reply), but if you think you might want to experiment with different colours for the shading then I suggest you add a Solid Color Fill Adjustment Layer - one for each quadrant. Then it's easy to experiment with different colours - just double-click in the adjustment layer color section.
    If you've not used these before you work slightly differently. First select a quadrant , then add your Solid Fill Layer. Now if you need to refine the edges, with the layer selected, you paint in black or white. White lets your selected colour show through, black conceals it - this is because you are using a mask. In the layers panel you can see which areas are applied or not from the mask thumbnail.
    Give it a try. The other thing with this technique is you can experiment with the different blending options and opacity to achieve a specific result.
    Cheers,
    Neale
    Insanity is hereditary, you get it from your children
    If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

  • SDO - how to create lines from PL/SQL

    Hello,
    I need to create a line objet in a table (TRAJECTORY) from selected points on another table (STATION).
    STATION description is
    station_id number,
    trajectory_id number,
    longitude float,
    latitude float,
    shape mdsys.sdo_geometry
    TRAJECTORY description is
    trajectory_id number,
    shape mdsys.sdo_geometry
    I would like to do something like
    update trajectory set shape =
    MDSYS.SDO_GEOMETRY
         2002,
         NULL,
         NULL,
         MDSYS.SDO_ELEM_INFO_ARRAY(1,2,1),
         MDSYS.SDO_ORDINATE_ARRAY
         (select longitude, latitude from station S where S.trajectory_id = trajectory_id)
    It does not work.
    I do not want to use an SQLLOAD because it is supposed to be updated with a trigger or a regular call to a store procedure.
    Thanks in advance for your help,
    Vincent ROBINE

    Thanks a lot for your advice,
    I have tried what you suggest, it seems to work fine for small line, but it does not work for big string.
    For the test I wish to make, I have the following result:
    update cycle_voyage set shape = MDSYS.SDO_GEOMETRY(2002,0,NULL,MDSYS.SDO_ELEM_INFO_ARRAY
    (1,2,1),MDSYS.SDO_ORDINATE_ARRAY(16.641400,42.758900,16.768600,42.597300,16.869500,42.471200,16.9806
    00,42.326300,17.097500,42.184100,17.211500,42.041200,17....
    ...00)) where platform_code = 'YTFL' and cv_number = 0
    longueur : 13690
    BEGIN fillSdoOrdinate('YTFL',0); END;
    ERREUR ` la ligne 1 :
    ORA-00939: too many arguments for function
    ORA-06512: at "CODBA.FILLSDOORDINATE", line 29
    ORA-06512: at line 1
    My procedure is done this way :
    create or replace procedure fillSdoOrdinate (p_platform_code varchar2, p_cv_number number) is
    l_listePoints varchar2(20000);
    l_nbPoints number;
    cursor listeCoords is
    select longitude, latitude from station
    where platform_code = p_platform_code
    and cv_number = p_cv_number;
    begin
    l_listePoints := 'update cycle_voyage set shape = MDSYS.SDO_GEOMETRY(2002,0,NULL,MDSYS.SDO_ELEM_INFO_ARRAY (1,2,1),MDSYS.SDO_ORDINATE_ARRAY(';
    l_nbPoints := 0;
    for curCoords in listeCoords loop
         if (l_nbPoints >0) then
         l_listePoints := l_listePoints||',';
         end if;
         l_nbPoints := l_nbPoints +1;
         l_listePoints := l_listePoints||trim(to_char(curCoords.longitude,'9999.999999'))||','||trim(to_char(curCoords.latitude,'9999.999999'));
    end loop;
    l_listePoints := l_listePoints||')) where platform_code = '''||p_platform_code||''' and cv_number = '||to_char(p_cv_number);
    dbms_output.put_line(substr(l_listePoints,1,245)||'...');
    dbms_output.put_line('...'||substr(l_listePoints,length(l_listePoints) - 50,51));
    dbms_output.put_line('longueur : '||to_char(length(l_listePoints)));
    execute immediate l_listePoints;
    end;
    show errors
    If the 'EXECUTE IMMEDIATE' is limited to 2000 characters, it wont work because this is not the longest line and it is already 13690 characters long.
    Any help would be welcome,
    Vincent ROBINE

  • How to Create Eraser Tool

    Hi,
    I wana create one eraser. I don't know about Eraser Tool. Please tell me the solution. Eraser will be resizable, Which end user can easily erase it's drawing. Please help me.........!

    Here are three threads in which you didn't reply to the responses:
    [http://forums.sun.com/thread.jspa?threadID=5366108]
    [http://forums.sun.com/thread.jspa?threadID=5366123]
    [http://forums.sun.com/thread.jspa?threadID=5367411]
    Do you think that motivates anyone to try to help you?
    db

  • How to create  monitoring tool in SAP BI

    HY! Experts,
    i was new to BI Platform
    how to do monitoring in the BI  and why do we do monitoring please tell me.
    please tell me the following steps to be taken
    what are the steps needed to be taken .
    thanks & Regard.........
    Ravi Sarma..........

    Hi Ravi,
    In BW we load data from various external data sources like R/3, flat files, ECC etc..
    In a live environement, everyday we load data from various data sources to BW. There can be many scenarios where these loads can fail. if any load fails we have to rectify the issue and load should start again. Else all the rest of the jobs will stuck and data will not be loaded to BW. so the users wont be able to do reporting. That is why we need to monitor these loads that it is running fine, no jobs are stuck.
    We design process chains to load data to BW, which executes steps required to laod data to the targets in BW.
    Refer the below link.
    Process chain monitoring
    http://help.sap.com/saphelp_nw2004s/helpdata/en/8f/c08b3baaa59649e10000000a11402f/frameset.htm
    /people/siegfried.szameitat/blog/2005/07/28/data-load-errors--basic-checks
    How to do process chain monitoring effectively in BW ?
    Hope this will help.
    - Jaimin

Maybe you are looking for