How to create LOB data type in table?

what is syntax to create LOB type in a table?
Thanks
Yash

can u send me the query for the insert image into the data base plz.................
mail id is
[email protected]
if u know please send me it is urgent to me plzzzzzzzzzzzz................
thanks..............

Similar Messages

  • How to create the Data Type for the receiver end?

    Hello Expertise
    I wanted to Create a Data type for  Receiver end in PI.
    Sender end is ECC.
    Receiver end is SRM
    Here's the Data type for Sender end  as
    Can anyone help to create the Data type for Receiver end i.e SRM.
    Thanks in advance.
    Regards
    karan

    Hi Karan,
    Please don't call Sir, we are just trying to help each other.
    Please go through below scenario's and check your configuration.
    ABAP Client Proxy to ABAP Server Proxy Scenario - Process Integration - SCN Wiki
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e0ac1a33-debf-2c10-45bf-fb19f6e15649?overridelayout=true
    http://wiki.scn.sap.com/wiki/display/XI/Step-by-step+FTP+to+ABAP+Proxy
    regards,
    Harish

  • How to create a Attribute "Type standard table OF" to a OSS NOTE

    Dear experts,
    I need to add new attributes in a standard class as per one OSS note. I took access key to add new attributes. I have a question.
    class name: CL_J_1BEFD
    Attribute: MT_GROUP_C350
    Level: Instance
    Visibility: Private
    Type STANDARD TABLE OF mty_result
    How do i add the instance attribute because i do not want to give the typing and associated type, instead i have to declare data: MT_GROUP_C350 type standard table of mty_result in class builder private section code.
    if you look at the pushbutton between Associated type and Description, for all instance attributes there's a green color lining below the arrow. I want my attribute also to be exactly same.
    Though i have access key, in private section the display<->Change button is disabled.
    Please suggest me how do i add code in private section of a standard class. i have required access key to change the class.
    Thanks,
    Alysson

    Hi Friend...
    Thanks, but the question is...
    When I went to transaction se24 or se80, I chose the class CL_J_1BEFD and second I swap to "CHANGE MODE".. after that the pushbutton is blocked... I can create the Attribute  mt_group_c800 in the Class (using TYPE or LIKE option), but i can't change the code in the private session even using the assistant to modify it.
    When I acess the Button "Detail View" the option "Direct Type Entry" is just unavaliable too, no matter what i do!
    I coudn't find a way to create the Attibute like the note Describes (SAPNOTE NUMBER 1575772 - in the attachment of the note)
    The changes are contained in the attachment
    Follows the instructions retrieved from the file:
    Add the following Attributes on the Class CL_J_1BEFD Private section
    data:
    mt_group_c800 TYPE STANDARD TABLE OF mty_result .
    data:
    mt_group_c850 TYPE STANDARD TABLE OF mty_result .
    data:
    mt_group_c860 TYPE STANDARD TABLE OF mty_result .
    data:
    mt_group_c890 TYPE STANDARD TABLE OF mty_result .
    How can i make a way to creat this attributes using  "TYPE STANDARD TABLE OF " Option?

  • How to create a line type in data dictionary

    How to create a line type in data dictionary?Please explain step by step?
    Thanks & Regads,
    Sairam

    Hi,
    the details abbout the line type.
    The line type of a table type can be defined by:
    o Specification of a type that already exists (data element,
    structure, table type, table, view) whose properties are then copie
    as properties of the defined table line.
    o Direct type input, where data type, number of positions, and, if
    required, decimal places, are entered directly.
    o Specification of a reference type.
    and SE11 and click on datatype and click on table type and enter the line type.
    Thanks
    Shiva

  • How to create a day type in Infotype 0041 (Want to maintain EE Retirement date)

    Dear Consultants,
    Can any buddy tell how to create a day type (Retirement date) in Infotype 41,
    My client want to maintain employees retirement date in Infotype 0041, please share your Ideas.
    Thanks & Regards,
    Navesh

    Hi Sridevi,
    Thanks for quick reply.
    Regards,
    Navesh

  • How to create the sub type field in hr abap infotype

    hi ,
        how to create the sub type field in hr abap infotype.
    regards,
    venkat.

    Try like this also
    creating of infotype please follow these steps ...
    Step 1: Create Infotypes
    i. Goto Transaction PM01 – To create Infotypes:
    ii. Enter the Infotype Number and say create all.
    iii. The following message would display:
    i. PSnnnn Does not exist. How do you want to proceed?
    iv. Click
    v. A maintain Structure screen appears.
    Fill in the short text description and the PS structure of the Infotype.
    Since the fields Personnel No, Employee Begin Date, End Date, Sequential Number,Date of Last Change, Name of user who changed the object are available in the PAKEY and PSHD1 structure, define the PSnnnn structure with only the fields you required.
    vi. Once the PS Structure is created, save and activate the structure.
    vii. In the initial screen of PM01, now click on .
    Create a new entry for the infotype.
    Fill in the values as mentioned below and save.
    Infotype Characteristics:
    Infotype Name of the infotype_ Short Text: __Short Description________
    *General Attributes :
    Time constraint = 1
    Check Subtype Obligatory
    Display and Selection:
    Select w/ start = 3 “Valid record for entered data
    Select w/ end = 5 “Records with valid dates within the period entered
    Select w/o date = 6 “Read all records
    Screen header = 02 “Header ID
    Create w/o end = 1 “Default value is 31.12.9999
    Technical Data:
    Single screen = 2000
    List screen = 3000; List Entry Checked.
    viii. In the initial screen of PM01, now click on .
    Choose the infotype entry in the list.
    Fill in the values as mentioned below and save.
    Technical Attributes:
    In tab section,
    The following attribute values are given:
    Applicant DB Tab = PAnnnn “Infotype Name
    Subtype field = SUBTY
    Subtype table = T591A
    Subty.text tab. = T591S
    Time cnstr.tab. = T591A
    Prim. /Sec. = I Infotype
    Period/key date = I Interval
    and .
    ix. Infotype Screen Modification:
    Edit Screen 2000 from PM01 for the Infotype.
    ABAP Editor for the Infotype Program MPnnnn00 will be displayed.
    Click . Flow Logic will be displayed. There string coding of your own logic.
    Regards
    Pavan

  • How to create screen resolution in bdc table control

    hi gurus
    can anyone suggest me
    how to create screen resolution in bdc table control
    thanks&regards
    mark.

    Hi ,
    Using CTU_PARAMS table for screen resolution .
    For this sample code.
    This is for Transation  FB60.
    report ZZFB60
           no standard page heading line-size 255.
    tables t100.
    PARAMETERS : p_file1  like  rlgrap-filename,
                 p_doctyp like  RF05A-BUSCS,
                 p_invdat like  INVFO-BLDAT,
                 p_posdat like  INVFO-BUDAT.
    CONSTANTS  :  C_TRANS_FB60(4) VALUE 'FB60'.
    *Parameter string for runtime of CALL TRANSACTION
    data : l_option type ctu_params,
           l_subrc type sysubrc.
    DATA :  l_mstring(150).
    data      accnt type char17.
    data       : day   type char2,
                 month type char2,
                 year  type char4,
                 date1 type char10,
                 date2 type char10.
    data      :  cnt(2) TYPE n,
                 cnt1 type i,
                 fld(25) TYPE c.
    data : begin of excel occurs 0,
            fieldname(255) type c,
           end of excel.
    DATA:BEGIN OF it_mess OCCURS 0,
             msgtyp(5),
             lms(200),
              msgv1(50),
         END OF it_mess.
    data: begin of t_record occurs 0,
             BUKRS(004),
            ACCNT(017),
            XBLNR(016),
            WRBTR1(016),
            WAERS(005),
            SECCO(004) ,
            SGTXT(050),
            HKONT(010),
            WRBTR2(017),
            MWSKZ(002),
            GSBER(004),
            KOSTL(010),
         end of t_record.
    *Internal Table for Header Data
    DATA :  BEGIN OF t_head OCCURS 0,
            BUKRS(004),      "Company Code
            ACCNT(017),      "Account or Vendor
            XBLNR(016),      "Reference
            WRBTR1(017),     "Amount in document currency
            WAERS(005),      "Currency
            SECCO(004),      "Section Code
            SGTXT(050),      "Text
            END OF t_head.
    *Internal table for Item Data
    DATA :  BEGIN OF t_item OCCURS 0,
            ACCNT(017),      "Account
            HKONT(010),     "GL Account
            WRBTR2(017),    "Line item Amount in document currency
            MWSKZ(002),     "Tax Code
            GSBER(004),     " Business Area
            KOSTL(010),     "Cost centre
            END OF t_item.
    DATA: IT_BDCDATA      LIKE  BDCDATA OCCURS 0 WITH HEADER LINE,
          IT_BDC_MESSAGES LIKE  BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
    *include bdcrecx1.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file1.
      PERFORM  file_selection.
      PERFORM  data_upload.
      PERFORM  table_control.
    start-of-selection.
    l_option-defsize = 'X'.
    l_option-dismode = 'A'.
    l_option-updmode = 'S'.
    day = p_invdat+6(2).
    month = p_invdat+4(2).
    year =  p_invdat+0(4).
    concatenate day month year into date1 SEPARATED BY '.'.
    day = p_posdat+6(2).
    month = p_posdat+4(2).
    year =  p_posdat+0(4).
    concatenate day month year into date2 SEPARATED BY '.'.
    *perform open_group.
    loop at t_head.
    CLEAR    IT_BDCDATA.
    REFRESH  IT_BDCDATA.
    perform bdc_dynpro      using   'SAPLACHD'         '1000'.
    perform bdc_field       using   'BDC_OKCODE'        '=ENTR'.
    perform bdc_field       using   'BKPF-BUKRS'        t_head-bukrs.
    perform bdc_dynpro      using   'SAPMF05A'          '1100'.
    perform bdc_field       using   'BDC_OKCODE'        '/00'.
    perform bdc_field       using   'RF05A-BUSCS'       p_doctyp.
    perform bdc_field       using   'INVFO-ACCNT'       t_head-accnt.
    perform bdc_field       using   'INVFO-BLDAT'       date1.
    perform bdc_field       using   'INVFO-BUDAT'       date2.
    perform bdc_field       using   'INVFO-XBLNR'       t_head-xblnr.
    perform bdc_field       using   'INVFO-WRBTR'       t_head-wrbtr1.
    perform bdc_field       using   'INVFO-WAERS'       t_head-waers.
    perform bdc_field       using   'INVFO-SECCO'       t_head-secco.
    perform bdc_field       using   'INVFO-SGTXT'       t_head-sgtxt.
    cnt = 1.
    cnt1 = 1.
    loop at t_item where accnt = t_head-accnt.
    *if cnt > 4.
    *cnt = 4.
    *endif.
    if cnt1 gt 1.
    CONCATENATE 'ACGL_ITEM-MARKSP(' cnt ')' INTO fld.
    perform bdc_field      using   fld                   'X'.
    perform bdc_dynpro      using 'SAPMF05A'          '1100'.
    perform bdc_field       using 'BDC_OKCODE'        '=0005'.
    endif.
    perform bdc_dynpro      using 'SAPMF05A'          '1100'.
    perform bdc_field       using   'BDC_OKCODE'        '/00'.
    CONCATENATE 'ACGL_ITEM-HKONT(' cnt ')' INTO fld.
    perform bdc_field       using  fld                t_item-hkont.
    CONCATENATE 'ACGL_ITEM-WRBTR(' cnt ')' INTO fld.
    perform bdc_field  using       fld                t_item-wrbtr2.
    CONCATENATE 'ACGL_ITEM-MWSKZ(' cnt ')' INTO fld.
    perform bdc_field       using  fld                t_item-mwskz.
    CONCATENATE 'ACGL_ITEM-GSBER(' cnt ')' INTO fld.
    perform bdc_field       using  fld                t_item-gsber.
    CONCATENATE 'ACGL_ITEM-KOSTL(' cnt ')' INTO fld.
    perform bdc_field       using  fld                t_item-kostl.
    perform bdc_field      using  'BDC_CURSOR'  fld.
    *CONCATENATE 'ACGL_ITEM-MARKSP(' cnt ')' INTO fld.
    *perform bdc_field      using   fld                   'X'.
    cnt1 = cnt1 + 1.
    *cnt = cnt + 1.
    *if cnt > 1.
    *perform bdc_dynpro      using 'SAPMF05A'          '1100'.
    *perform bdc_field       using 'BDC_OKCODE'        '=0005'.
    **perform bdc_field       using 'BDC_OKCODE'        '=0006'.
    *endif.
    endloop.
    perform bdc_dynpro      using 'SAPMF05A' '1100'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=BS'.
    perform bdc_dynpro      using 'SAPMSSY0' '0120'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=BU'.
    *perform bdc_transaction using 'FB60'.
    CALL TRANSACTION C_TRANS_FB60 USING IT_BDCDATA  options from l_option
                                 MESSAGES INTO IT_BDC_MESSAGES.
    perform error.
    perform errordownload.
    endloop.
    *perform close_group.
    *Form  data_upload
    FORM data_upload .
    CALL FUNCTION 'WS_UPLOAD'
    EXPORTING
       FILENAME              =  p_file1
       FILETYPE              = 'DAT'
      TABLES
        DATA_TAB             =  t_record.
    ENDFORM.                    " data_upload
    *Form  file_selection
    FORM file_selection .
    CALL FUNCTION 'F4_FILENAME'
        EXPORTING
          program_name  =  syst-cprog
          dynpro_number =  syst-dynnr
          field_name    = 'p_file1'
        IMPORTING
          file_name     =  p_file1.
    ENDFORM.                    " file_selection
    Form  BDC_DYNPRO
    FORM BDC_DYNPRO using program dynpro.
      CLEAR IT_BDCDATA.
      IT_BDCDATA-PROGRAM = PROGRAM.
      IT_BDCDATA-DYNPRO = DYNPRO.
      IT_BDCDATA-DYNBEGIN = 'X'.
      APPEND  IT_BDCDATA.
    endform.
    *Form  BDC_FIELD
    FORM  bdc_field using fnam fval.
      CLEAR  IT_BDCDATA.
      IT_BDCDATA-FNAM = FNAM.
      IT_BDCDATA-FVAL = FVAL.
      APPEND  IT_BDCDATA.
    ENDFORM.
    Table Control
    FORM table_control .
      LOOP AT t_record.
        ON CHANGE OF t_record-accnt.
          MOVE-CORRESPONDING t_record TO t_head.
          APPEND t_head.
        ENDON.
      loop at t_head.
             t_item-accnt   =  t_head-accnt.
             t_item-hkont   =  t_record-hkont.
             t_item-wrbtr2  =  t_record-wrbtr2 .
             t_item-mwskz   =  t_record-mwskz .
             t_item-gsber   =  t_record-gsber .
             t_item-kostl   =  t_record-kostl.
        APPEND t_item.
    endloop.
         If t_record-level = 'H'.
             t_head-bukrs   =  t_record-text1.
             t_head-accnt   =  t_record-text2.
             t_head-xblnr   =  t_record-text3.
             t_head-wrbtr1  =  t_record-text4.
             t_head-waers   =  t_record-text5.
             t_head-secco   =  t_record-text6.
             t_head-sgtxt   =  t_record-text7.
          APPEND t_head.
         else.
            t_item-accnt   =  t_head-accnt.
            t_item-hkont   =  t_record-text1.
            t_item-wrbtr2  =  t_record-text2.
            t_item-mwskz   =  t_record-text3.
            t_item-gsber   =  t_record-text4.
            t_item-kostl   =  t_record-text5.
         APPEND t_item.
         endif.
      ENDLOOP.
    ENDFORM.
    FORM error .
      LOOP AT IT_BDC_MESSAGES.
        IF IT_BDC_MESSAGES-msgtyp = 'E'.
       SELECT single  * FROM t100  WHERE
                                    sprsl = it_BDC_MESSAGES-msgspra
                                    AND   arbgb = IT_BDC_MESSAGES-msgid
                                    AND   msgnr = IT_BDC_MESSAGES-msgnr.
          IF sy-subrc = 0.
            l_mstring = t100-text.
            IF l_mstring CS '&1'.
              REPLACE '&1' WITH IT_BDC_MESSAGES-msgv1 INTO l_mstring.
              REPLACE '&2' WITH IT_BDC_MESSAGES-msgv2 INTO l_mstring.
              REPLACE '&3' WITH IT_BDC_MESSAGES-msgv3 INTO l_mstring.
              REPLACE '&4' WITH IT_BDC_MESSAGES-msgv4 INTO l_mstring.
            ELSE.
              REPLACE '&' WITH IT_BDC_MESSAGES-msgv1 INTO l_mstring.
              REPLACE '&' WITH IT_BDC_MESSAGES-msgv2 INTO l_mstring.
              REPLACE '&' WITH IT_BDC_MESSAGES-msgv3 INTO l_mstring.
              REPLACE '&' WITH IT_BDC_MESSAGES-msgv4 INTO l_mstring.
            ENDIF.
            CONDENSE l_mstring.
            it_mess-msgtyp = IT_BDC_MESSAGES-msgtyp.
            it_mess-lms = l_mstring.
            it_mess-msgv1 = IT_BDC_MESSAGES-msgv1.
            APPEND it_mess.
          ELSE.
            it_mess-msgtyp = IT_BDC_MESSAGES-msgtyp.
            it_mess-lms = l_mstring.
            it_mess-msgv1 = IT_BDC_MESSAGES-msgv1.
            APPEND it_mess.
          ENDIF.
        ENDIF.
      ENDLOOP.
    ENDFORM.
    form errordownload.
    *down the internal table to excel file.
    call function 'EXCEL_OLE_STANDARD_DAT'
               EXPORTING
                    file_name                 = 'c:/Error.xls'
               TABLES
                    data_tab                  = it_mess
                    fieldnames                = excel
               EXCEPTIONS
                    file_not_exist            = 1
                    filename_expected         = 2
                    communication_error       = 3
                    ole_object_method_error   = 4
                    ole_object_property_error = 5
                    invalid_filename          = 6
                    invalid_pivot_fields      = 7
                    download_problem          = 8
                    others                    = 9.
    endform.
    Reward if useful
    Regards,
    Narasimha
    Edited by: narasimha marella on May 13, 2008 12:12 PM

  • Create dynamic data type in structure

    Hi Experts,
    I am new to ABAP.
    In my scenario data type is varying for the field. for that I need to create dynamic data type in structure, this structure I am using for  internal table for OVS search input.
    Please suggest the solution for this.
    Advance thanks,
    Regards,
    BBC

    Thanks for your quick reply,
    I used your logic like this.
    data:
    ls_component type abap_componentdescr,
    lt_component type abap_component_tab.
    *... (1) define structure components :
    clear ls_component.
    ls_component-name = 'NVALUE'.
    ls_component-type ?= cl_abap_typedescr=>describe_by_name( <fs_seg_v>-fieldname ).
    insert ls_component into table lt_component.
    *... (2) create structure
    data lr_strucdescr type ref to cl_abap_structdescr.
    data lr_data_struc type ref to data.
    lr_strucdescr = cl_abap_structdescr=>create( lt_component ).
    create data lr_data_struc type handle lr_strucdescr.
    field-symbols <fs> TYPE any.
    assign lr_data_struc->* to <fs>.
    your logic is working fine.
    here I am getting feild name (<fs_seg_v>-fieldname) from internal table.
    But I need to assign same field name structure to query parameter.
    FIELD-SYMBOLS: <ls_query_params> TYPE lty_stru_input.
    Please can you suggest how I can refer the field name structure?
    Regards,
    BBC

  • How to get the data from Pooled Table T157E.

    Hi Experts,
    How to get the data from Pooled Table T157E.
    Any help.
    Thanks in Advance,
    Ur's Harsha.

    create some internal table similar to T157E and pass all data as per SPRAS.
    After that use internal table in your program as per the requirement.
    Regds,
    Anil

  • In ADF how can i insert data in multiple table if they have foreign key

    I have started working on ADF and can anybody inform me in ADF how can i insert data in multiple table if they have foreign key,please?
    Thnak you very much.

    Hello,
    Still no luck.I am surely doing silly mistakes.Anyway,Here are my workings-
    1> student_mst (id(pk),studentname) and student_guard_mst(id(fk),guardianname)
    2> created EO from both of the tables,made id in both EO as DBSequence and an association was also generated.
    3> i made that association composite by clicking the checkbox
    4> i created 2 VO from 2 EO.
    5> put those VO in Application Module.
    6> dragged and dropped 2 VO on my jspx page and dropped them as ADF Form.
    Now what to do please?

  • How to validate the dates in the table control ?

    How to validate the dates in the table control ?
    Can I write like this ?
    LOOP AT it_tab .
    CHAIN.
    FIELD : it_tab-strtdat,it_tab-enddat.
    module date_validation.
    ENDCHAIN.
    ENDLOOP.
    Module Date_validation.
    ranges : vdat type sy-datum.
    vdat-sign = 'I'.
    VDAT-LOW = it_tab-STRTDAT.
    VDAT-HIGH = it_tab-ENDDAT.
    VDAT-OPTION = 'BT'.
    APPEND VDAT.
    WHAT CODE I have to write here to validate ?
    and If I write like this How can we know which is the current row being add ?
    It loops total internal table ..?
    Bye,
    Muttu.

    Hi,
    I think there is no need to put chain endchain.
    To do validation you have to write module in PAI which does required validations.
    Thanks
    DARSHAN PATEL

  • How to creat a Data provider  based on different fields in SAP BW ?

    Hi,
    Experts,
    There are  20 fields  of  Plant Maintainace  like : 
    SWERK
    BEBER
    STORT
    TPLNR
    EQUNR
    INGRP
    QMDAT   ---peroid
    STTXT
    QMDAT  - Date of Notification
    QMNUM
    QMTXT
    QMART
    AUSVN
    AUZTV
    AUSBS
    AUZTB
    AUSZT
    ERNAM
    QMDAB
    AUFNR
    I  want to creat a  Report based upon these fields  ?
    For that I h'v  checked the relevant Fields to the   existing standard  Datasource  in Bw side   &
    Checked  cubes   created  based upon these Datasource  in Bw side !
    i h'v found  some fields are  existing different cubes & some are  missing .
    How to creat a Data provider  based on different fields in SAP BW ?
    plz suggest      !!!!!!!
    Thanx,
    Asit
    Edited by: ASIT_SAP on Jul 15, 2011 6:25 AM
    Edited by: ASIT_SAP on Jul 15, 2011 6:27 AM
    Edited by: ASIT_SAP on Jul 15, 2011 12:37 PM

    Hi Lee, Please see below..
    DECLARE @Machine2 TABLE
    DispatchDate DATE
    INSERT INTO @Machine2 VALUES ('2014/02/01'), ('2014/02/02'), ('2014/02/03')
    DECLARE @DateFrom DATE
    SELECT @DateFrom = DATEADD(D,1,MAX(DispatchDate)) FROM @Machine2
    SELECT @DateFrom AS DateFrom
    Please mark as answer, if this has helped you solve the issue.
    Good Luck :) .. visit www.sqlsaga.com for more t-sql code snippets and BI related how to articles.

  • How to export some data from the tables of an owner with integrity?

    Hi to all,
    How to export some data from the tables of an owner with integrity?
    I want to bring some data from all tables in a single owner of the production database for development environment.
    My initial requirements are: seeking information on company code (emp), contract status (status) and / or effective date of contract settlement (dt_liq_efetiva) - a small amount of data to developers.
    These three fields are present in the main system table (the table of contracts). Then I thought about ...
    - create a temporary table from the query results table to contract;
    - and then use this temporary table as a reference to fetch the data in other tables of the owner while maintaining integrity. But how? I have not found the answer, because: what to do when not there is the possibility of a join between the contract and any other table?
    I am considering the possibility of consulting the names of tables, foreign keys and columns above, and create dynamic SQL. Conceptually, something like:
    select r.constraint_name "FK name",
    r.table_name "FK table",
    r.column_name "FK column",
    up.constraint_name "Referencing name",
    up.table_name "Referencing table",
    up.column_name "Referencing column"
    from all_cons_columns up
    join all_cons_columns r
    using (owner, position), (select r.owner,
    r.constraint_name fk,
    r.table_name table_fk,
    r.r_constraint_name r,
    up.table_name table_r
    from all_constraints up, all_constraints r
    where r.r_owner = up.owner
    and r.r_constraint_name = up.constraint_name
    and up.constraint_type in ('P', 'U')
    and r.constraint_type = 'R'
    and r.owner = 'OWNERNAME') aux
    where r.constraint_name = aux.fk
    and r.table_name = aux.table_fk
    and up.constraint_name = aux.r
    and up.table_name = aux.table_r;
    -- + Dynamic SQL
    If anyone has any suggestions and / or reuse code to me thank you very much!
    After resolving this standoff intend to mount the inserts in utl_file by a table and create another program to read and play in the development environment.
    Thinking...
    Let's Share!
    My thanks in advance,
    Philips

    Thanks, Peter.
    Well, I am working with release 9.2.0.8.0. But the planning is migrate to 10g this year. So my questions are:
    With Data Pump can export data just from tables owned for me (SCHEMAS = MYOWNER) parameterizing the volume of data (SAMPLE) and filters to table (QUERY), right? But parameterizing a contract table QUERY = "WHERE status NOT IN (2,6) ORDER BY contract ":
    1º- the Data Pump automatically searches for related data in other tables in the owner? ex. parcel table has X records related (fk) with Y contracts not in (2,6): X * SAMPLE records will be randomly exported?
    2º- for the tables without relation (fk) and which are within the owner (MYOWNER) the data is exported only based on the parameter SAMPLE?
    Once again, thank you,
    Philips
    Reading Oracle Docs...

  • How we create new data base in oracle 10g express edition

    hello every body.. i student of B tech n new user of oracle so please help me how we creat new data base in oracle 10g express edition

    Hello, Oracle XE can not create more than one instance, the other editions yes, but like other editions XE allows you to create database schemas, schemas logically grouped objects like tables, views, indexes created by a user. By creating an Oracle user is associated with a schema of the same name.
    Using SYS or system accounts for creating user accounts.
    Syntax to create a user:
    create user Your_user
    IDENTIFIED BY password
    default tablespace users;
    grant connect, resources to your_user;
    Edited by: rober584812 on Jun 25, 2010 9:03 PM

  • How to create multiple Tree Type Region In Tabular Form ?

    Dear Friends,
    i have to design tabular form to Distribute User Rioght to emp to access application
    eg if i have Three module in application
    1.Administration
    2.Attendance
    3.Accounts
    Module
    1 Administration have 5 Pages A,B,C,D,E.
    Module
    2 Attendance HAVE 4 Pages F,G,H,I
    Module
    3 Accounts HAVE 7 Pages J,K,L,M,N,O,P
    I need these three module divided into three section in tabular form as a tree Type like
    Module 1 Tree Open in Tabular Form like
    - (Tree Mark Open )
    =======================================================
    PAGE_ID-------------SUBPAGE_ID-------VIEW-------------------MODIFY-------------------CREATE----------------------------TABLE COLUMN NAME
    ========================================================          
    Administration-----------A------------------CHECK bOX------------CHECK BOX-------------CHECK BOX
    Administration-----------B------------------CHECK bOX------------CHECK BOX-------------CHECK BOX
    Administration-----------C------------------CHECK bOX------------CHECK BOX-------------CHECK BOX
    Administration-----------D------------------CHECK bOX------------CHECK BOX-------------CHECK BOX
    Administration-----------E------------------CHECK bOX------------CHECK BOX-------------CHECK BOX
    - (Tree Mark Open )
    Module 2 Tree Open in Tabular Form like
    Attendance-----------F------------------CHECK bOX------------CHECK BOX-------------CHECK BOX
    Attendance-----------G------------------CHECK bOX------------CHECK BOX-------------CHECK BOX
    Attendance-----------H------------------CHECK bOX------------CHECK BOX-------------CHECK BOX
    Attendance-----------I------------------CHECK bOX------------CHECK BOX-------------CHECK BOX
    - (Tree Mark Open )
    Module 3 Tree Open in Tabular Form like
    Accounts-------------J------------------CHECK bOX------------CHECK BOX-------------CHECK BOX
    Accounts-------------K------------------CHECK bOX------------CHECK BOX-------------CHECK BOX
    Accounts-------------L------------------CHECK bOX------------CHECK BOX-------------CHECK BOX
    Accounts-------------M------------------CHECK bOX------------CHECK BOX-------------CHECK BOX
    Accounts-------------N------------------CHECK bOX------------CHECK BOX-------------CHECK BOX
    Accounts-------------O------------------CHECK bOX------------CHECK BOX-------------CHECK BOX
    Accounts-------------P------------------CHECK bOX------------CHECK BOX-------------CHECK BOXi need divided these three Module in Tabular form in three region as tree.
    Table APPLICATION_PAGE_DETAILS
    ID                   NUMBER
    PAGE_ID             NUMBER
    SUB_PAGE_ID          NUMBER
    ========================
    TABLE USER_RIGHT
    ======================
    ID                  NUMBER
    EMP_ID            NUMBER
    PAGE_ID            NUMBER
    SUB_PAGE_ID        NUMBER
    VIEW                    VARCHAR2(1)
    MODIFY                VARCHAR2(1)
    CREATE                VARCHAR2(1)How to create multiple Tree Type Region In Tabular Form ?
    How can i do this ?
    Thanks
    Edited by: Vedant on Oct 4, 2011 3:21 AM
    Edited by: Vedant on Oct 4, 2011 9:09 PM
    Edited by: Vedant on Oct 13, 2011 8:57 PM

    Well think of it I believe the scenario is too bird viewed hence the solution can't be exact.
    But thinking of a possible solution every time a child operation fails have a catch block where you you go back to system if the parent needs to be deleted if yes, call Delete Method on the parent.
    Note: Make sure that the decision on whether or not the parent record needs to be deleted will depends on the question "Does Parent Record already has several other children associated to it or not"
    Hope this clarifies.
    Regards,
    Messer

Maybe you are looking for