How to create mail user who only send or receive email to local user

I setup iplanet message server 5.2 SP1 for window 2000. It work right. But I don't know how to setup a mail user which can only send/receive email to/from local email user(user from the same message server). Thanks.

The easiest way I can think of, would be to isolate these users to a different mail server.
Once you isolate them, you can isolate that server so that it cannot connect to the external world, but only to your other servers, so local mail would be allowed, but not external mails.
I can't think of any way to achieve what you're asking for in the same server that allow some users full access.

Similar Messages

I am getting the message that my email password and/or username is not correct. It is correct! I am the only one who cannot send or receive emails...I am the only one using a mac.

I am getting the message that my email password and/or username is not correct. They are both correct! I am the only one who cannot send or receive emails...I am the only one using a mac. i use mac mail and it is my companies server. I took my computer and iPhone to the Apple store...4 hours later they said that couldn't figure out why it wasn't working. Any suggestions???? I am also not able to log into the C-Panel...

Same here! Happened yesterday to me on New iPad and iPhone 4S. On iPad I managed to correct it by removing the account and activating it again as an Exchange account...I have mail and calendar OK!
On the iPhone nothing seems to work!
Facts:
1. everything worked perfectly for years!
2. I have the 2-step authentication deactivated on my google account so it cannot be this one.
3. On desktop everything works just fine, on iPad everything is OK with Exchange account added (after Google removed support for Exchange account access I CAN ONLY HAVE ONE DEVICE with Google Exchange account, so doing the same on the iPhone does not work!)
4. Tried to remove and add the account again - no results.
5. Tried to remove and add as Google, as Exchange, as Other account - I get calendar but no mail!!!
6. Tried to reboot between remove/add accounts - no results.
7. Tried to ("reset settings") reset the device - no results.
8. Tried to add as POP account and I it worked - I get mail but I do not need POP as I am using zounds of mail with labels and need to be working on an IMAP account
9. To make things even more complicated...I have another account which works perfectly!!!!!
Anyone out there having a clue?

How to create the Business System both sender and receiver in SAP XI / PI

Dear All
kindly let me know how to create the Business System both sender and receiver in SAP XI / PI
Regards
Blue

Hi,
If by any chance you are not able to find these....
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/workingwithSystemLandscapeDirectory+%28SLD%29&
http://help.sap.com/saphelp_nw04s/helpdata/en/24/8fa93e08503614e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/en/f1/92b248db68409487661ff13239127d/content.htm
Regds,
Pinangshuk.

Mail (5.3) OS X 10.7.5 mail program crashing when opening an email with attachment. Any suggestions out there? I can open the mail program...send and receive emails...click on emails without attachments with no problem.

I am having a problem successfully opening an email containing attachment. I can open the mail program...send and receive emails...and view emails that do not contain attachments. But whenever I click on an email containing an attachment, I get the spinning beach ball for a few seconds and then the entire program closes. Any suggestions before I make a one hour trip to the Apple store for help?

I don't think an interactive portion of a PDF is an obscure problem (lots of designers I know use rollable PDF files for emailing 3D models) and while I understand that it's in a legacy program, there is no guarantee if I purchase Acrobat X, that the same problem won't exist. It's no an issue in Reader 10 but then again, it wasn't an issue in Reader 9 either. Since Adobe doesn't give trial versions for Mac (stupid), I have no way of checking this. The problem doesn't annoy me as much as being an Adobe product user who upgraded only to not have functionality and not have a way to have it resolved.

How to create an excel report and send it via email using a BPEL process ?

Hi Experts,
I have a requirement to develop a xl report based the data in the DB table. I will have to query the list of records entered / processed during previous day, generated the xl based report and send to users via email.
I talked to one the experts, he asked me to use the following Adapter and BPEL activities to accomplish it.
DBAdapter --> {BPEL process} --> Java Embedding --> Email Activity.
Can someone please help me to pass the information retrieved by DBAdapter to Java Embedding and then to email import? I have created DBAdapter and Java Embedding. I don't know, how to retrieve the data read / sent by DBAdapter using Java Embedding. Also please help me to pass the xl attachment to Email Activity.
Thanks for your help in advance!
Thanks,
Harisudhan Selvaraj

I would suggest something like:
DBAdapter --> Bpel Process --> File Adapter --> write file to location (you can write in csv which can be imported into xls)
Read Location --> FileAdapter --> Bpel Process --> Email Activity
Regards,
Anshul

Only send and receive emails while connecetd to Desktop Manager, wireless how?

Hello,
We have a user taht we are trying to setup with our BES server. The Wireless sync did not work so we are trying to do it manually through DM. We have got as far as getting the syncronizatiobn to be done while he is connected with the USB cable. But how we can do so this is done wirelesly.
By looking at your helpfull forum I know I have to be tinkering with some short of options. Any documentation link will be very helpfull.
Thank you very much,
Carlos Cavia

Greetings
I suspect that the issue is the SMTP server settings. On your home network you are using your providers SMTP server and all is fine (If you check your email account configs you will find that the SMTP server is set to your providers?).
When you use a different network (provider) mail will not be sent unless you use that networks (providers) SMTP server (this is a security issue to address ways of "spamming").
So if youre 3G/4G provider is the same as you home provider all will work well via your home WiFi. If you turn off WiFi and just use your 3G/4G connection to send mail (iPhone/iPad etc) all will work well (when you are out and about and using anothers WiFi network).
If you are connected to, say a MacDonalds WiFi, mail will probably not be sent. (It will be received though).
Using WEB mail interface (via your WEB browser) removes this problem as well.
(A SMTP server is what is used to send email. So to successfully use anothers (not a networks the same as your providers) WiFi network and send email via it, you must know the SMTP servers name and reconfigure your email account/s to use that server to send mail.)

Access - How to create Mail Address only list?

Printing envelopes from mail lists - via Microsoft Excel? Access - How to create Mail Address Only list?
Bearing my "new boy" status, step by step instruction would be appreciated.

Hi
This is a question only about the Microsoft products and has nothing to do with Toshiba notebooks but I have investigated a little bit in the net and found this useful sites:
http://support.microsoft.com/kb/q141991/
https://www.nahu.org/member/using%20excel%20to%20create%20lists%20and%20labels .pdf

How to create many user in the same database

hi
my question is "How to create many user in the same database(application)?"
for example, i have students, teachers, and staffs user using my application.
i can create many users to use the same application right?, how ^^''' ???
(right now i can only create application and then it shows every data in my DB
but i want it to show only the data for the user who login to that application)
Thanks.
ps. i'm newbie, please help T^T

You need to create a user table within your application that maintains their privileges. If you have LDAP you could use this for authorisation otherwise the table would handle that as well (store passwords etc). Your reports etc would then be filtered on information from this table.
Check out some of the sample applications to see how authorisation and access is implemented (Online store is one). The how-to on the issue tracking system should also have some useful pointers.
http://download-west.oracle.com/docs/cd/B31036_01/doc/appdev.22/b28839/issue_track.htm#BABBGBJG
cheers,
Ron

How to create a user account by mirroring another account in PowerShell (Trying to learn to use Powshell for some daily AD tasks intead of the GUI)

Hi,
I am trying to create user accounts via PowerShell instead of the Gui in server 2008 R2 (PowerShell 2.0).
I know how to create a user account with the following Power Shell command below is one from a dummy domain I created to practice.
PS C:\Users\Administrator> New-ADUser -SamAccountName "TestOut" -UserPrincipalNa
me "[email protected]" -GivenName "Test" -Surname "out" -DisplayName "Testou
t" -Name "Testout" -Enabled $true -Path "CN=users,DC=bwcat,DC=net,DC=int" -Accou
ntPassword (Read-Host -AsSecureString "Enter Account Password")
However when doing day to day tasks where I work normally we have a new hire, they contact IT and ask that a user account is created. I will ask who they would like to mirror.
I then would go into the gui pull up the user that they want to mirror right click him and choose copy. This would create a new user account that I would then fill out.
I am wondering if its possible to do this same thing via PowerShell, or if its not an option because it takes more work type up everything than it does to go into the gui and do it.
Anyway thanks for the help.

Hi Wilder, hi Mark,
first of all: The tutorial sources Mark posted - especially the book "Powershell 3 in A month of lunches" - are good to get a baseline start. A really great reference, especially when you try to learn it while still dealing with your daily business.
On another note, Wilder: While I fully agree that learning things sequentially is usually the best, I too jumped right in instead of learning how to walk first (though it's been some time now. Fewer years than you'd think, but still ...). So I thought I'd
give you a little aid with that function husk, so you could just stuff interesting bits into an available structure, making use of the fun tools in a useful context (It's fun fiddling around with the commands, but if you have to type in all of them manually
each time, using the GUI is often just faster. Doing fun things and being efficient with it feels even better though ...). So ... while I
do agree with yourself, learn it the Correct & Proper Way, I also do
intend to finish this little explanation about the husk, all the way to the end.
Everything below this paragraph is part of this.
function Copy-ADUser
<#
.SYNOPSIS
A brief description of the Copy-ADUser function.
.DESCRIPTION
A detailed description of the Copy-ADUser function.
.PARAMETER GivenName
A description of the GivenName parameter.
.PARAMETER Surname
A description of the Surname parameter.
.PARAMETER Template
A description of the Template parameter.
.EXAMPLE
PS C:\> Copy-ADUser -GivenName "Max" -Surname "Mustermann" -Template "Jonny.Normal"
.NOTES
Additional information about the function.
#>
[CmdletBinding()]
Param (
[Parameter(Mandatory = $true)]
[string]
$Surname,
[Parameter(Mandatory = $true)]
[string]
$GivenName,
[Parameter(Mandatory = $true)]
[string]
$Template
) # Create finished Strings
$JoinedName = $GivenName + "." + $Surname
# Create new User
$NewUser = New-ADUser -Surname $Surname -GivenName $GivenName -DisplayName "$Surname, $GivenName" -SamAccountName $JoinedName -Name "$Surename, $GivenName" -PassThru
# Copy from old User
$NewUser | Add-ADPrincipalGroupMembership -MemberOf (Get-ADPrincipalGroupMembership $Template | Where { $_.Name -ne 'Domain Users' })
# Do Whatever else you feel like doing
This is again the same function husk I posted earlier. Only this time, I filled a little logic (the pieces that were already posted in this thread). This time, I'll not only go over each part again ... I'll do it by reposting the segments and trying to show
some examples on how to modify the parts. Thus some of it will be repetitive, but this way all the info is in one spot.
Segment: Comment Based Help
<#
.SYNOPSIS
A brief description of the Copy-ADUser function.
.DESCRIPTION
A detailed description of the Copy-ADUser function.
.PARAMETER GivenName
A description of the GivenName parameter.
.PARAMETER Surname
A description of the Surname parameter.
.PARAMETER Template
A description of the Template parameter.
.EXAMPLE
PS C:\> Copy-ADUser -GivenName "Max" -Surname "Mustermann" -Template "Jonny.Normal"
.NOTES
Additional information about the function.
#>
That's the premier documentation part of a function, that teaches a user what the function does and how to use it. It's what's shown when using the Get-Help cmdlet.
Comment texts are not restricted to single lines however. For example you could replace ...
.EXAMPLE
PS C:\> Copy-ADUser -GivenName "Max" -Surname "Mustermann" -Template "Jonny.Normal"
... with ...
.EXAMPLE
PS C:\> Copy-ADUser -GivenName "Max" -Surname "Mustermann" -Template "Jonny.Normal"
Creates a new user named Max Mustermann and copies the group memberships of the already existing user Jonny Normal to this new User
... and get an explanation on what the example does when using Get-Help with the
-Detailed parameter (Explaining examples is always a good idea).
Segment: Parameter
[CmdletBinding()]
Param (
[Parameter(Mandatory = $true)]
[string]
$Surname,
[Parameter(Mandatory = $true)]
[string]
$GivenName,
[Parameter(Mandatory = $true)]
[string]
$Template
This is the segment that tells Powershell what input your function accepts. Each parameter of Copy-ADUser you set will be available in the next segment as a variable of the same name. You can add additional parameters if you need more information for your
logic. For example, let's add a parameter that allows you to specify what Organization the new user should belong to:
[CmdletBinding()]
Param (
[Parameter(Mandatory = $true)]
[string]
$Surname,
[Parameter(Mandatory = $true)]
[string]
$GivenName,
[string]
$Organization,
[Parameter(Mandatory = $true)]
[string]
$Template
That's how that would look like. You may notice that I didn't add the line with
"[Parameter(Mandatory = $true)] this time. This means you
may add the Organization parameter when calling Copy-ADUser, but you need not.
Segment: Logic
# Create new User
$NewUser = New-ADUser -Surname $Surname -GivenName $GivenName -DisplayName "$Surname, $GivenName" -SamAccountName "$GivenName.$Surename" -Name "$Surename, $GivenName" -PassThru
# Copy from old User
$NewUser | Add-ADPrincipalGroupMembership -MemberOf (Get-ADPrincipalGroupMembership $Template | Where { $_.Name -ne 'Domain Users' })
# Do Whatever else you feel like doing
This is the part of the function that does the actual work. Compared to the first husk I posted, this time there are two commands in it (and some comments). First, I create a new user, using the information passed into
the parameters -Surname and -GivenName. Then I Copy the group memberships of the user identified by the information given by the
-Template parameter.
So, let's modify it!
# Tell the user you are starting
Write-Host "Starting to create the user account for $GivenName $Surname"
# Create new User
$NewUser = New-ADUser -Surname $Surname -GivenName $GivenName -DisplayName "$Surname, $GivenName" -SamAccountName "$GivenName.$Surename" -Name "$Surename, $GivenName" -PassThru
# Tell the user you are copying Group Memberships
Write-Host "Copying the group-memberhips of $Template to $GivenName $Surname"
# Copy from old User
$NewUser | Add-ADPrincipalGroupMembership -MemberOf (Get-ADPrincipalGroupMembership $Template | Where { $_.Name -ne 'Domain Users' })
# Do Whatever else you feel like doing
Now after adding a few lines, the logic will tell us what it's doing (and do so before it
is taking action)!
Hm ... didn't we create a change in the Parameter Segment to add an -Organization parameter? Let's use it!
# If the -Organization parameter was set, the $Organization variable will be longer than 0. Thus do ...
if ($Organization.Length -gt 0)
# Tell the user you are starting
Write-Host "Starting to create the user account for $GivenName $Surname in the Organization $Organization"
# Create new User
$NewUser = New-ADUser -Surname $Surname -GivenName $GivenName -DisplayName "$Surname, $GivenName" -SamAccountName "$GivenName.$Surename" -Name "$Surename, $GivenName" -Organization $Organization -PassThru
# If the -Organization parameter was NOT set, the $Organization variable will have a length of 0. Thus the if-condition does not apply, thus we do the else block
else
# Tell the user you are starting
Write-Host "Starting to create the user account for $GivenName $Surname"
# Create new User
$NewUser = New-ADUser -Surname $Surname -GivenName $GivenName -DisplayName "$Surname, $GivenName" -SamAccountName "$GivenName.$Surename" -Name "$Surename, $GivenName" -PassThru
# Tell the user you are copying Group Memberships
Write-Host "Copying the group-memberhips of $Template to $GivenName $Surname"
# Copy from old User
$NewUser | Add-ADPrincipalGroupMembership -MemberOf (Get-ADPrincipalGroupMembership $Template | Where { $_.Name -ne 'Domain Users' })
# Do Whatever else you feel like doing
There! Now we first check whether the -Organization parameter was set (it's not mandatory after all, so you can skip it). If it
was set, do whatever is in the curly braces after if (...). However, if it wasn't set, do whatever is in the curly braces after
else.
And that concludes my "minor" (and hopefully helpful) tutorial on how to use the function husk I posted :)
With this, whenever you find another cool command that helps you in the user creation process, you can simply add it, similar to what I did in these examples.
And if it all didn't make much sense, go through the tutorials in proper order and come back - it'll make much more sense then.
Cheers and good luck with PowerShell,
Fred
There's no place like 127.0.0.1

How to create Mobile User Account

Hi all,
I have a dumb question but it makes me crazy !!!
I'm new in CRM 5.2 and in mobile as weel.
My question is : How to create a user acount into my mobile infrastructure ?
I've followed the following explanation but I don't find the solution :
[help|http://help.sap.com/saphelp_crm60/helpdata/de/c8/2ae1a3c73245c8aef8c4b69c2ff072/content.htm]
In there, it tells me to go thought User Management tool of Mobile Application Studio ( is it Microsoft Visual Studio ?) but in there i do not find any tools.
Thanks for your future help
Regards

hi,
Creation of User Accounts
Purpose
This process describes the steps required to create user accounts for secured and controlled access to the Mobile Application Repository (MAR). User accounts are created for consultants, who intend to customize mobile client applications using Mobile Application Studio (MAS). User account allows a consultant to log on to MAS.
Process Flow
       1.      During the installation of MAR, the system enables the User Management feature.
If MAR is upgraded from a release prior to 3.0 to the current release, the User Management feature must be enabled manually by system administrator. This is done by changing the umfrc parameter value to YES in the ARS_SYSTABLE.
       2.      The CRM technical administrator creates a DSN to access MAR by using the default internal login arsdb with password arsdb.
       3.      The CRM technical administrator carries out the following tasks using the User Manager tool of MAS:
                            a.      Creates user accounts.
                            b.      Associates each user account with a standard MAR profile. For more information, see Profiles of the Mobile Application Repository.
                            c.      Specifies a password for each user account.
Login IDs of the Mobile Application Repository
Definition
A login ID is a source through which users log on to Mobile Application Studio, and connect to the Mobile Application Repository (MAR). When MAR is installed, standard login IDs are available by default. While creating user accounts, the system administrator associates a standard login ID with the profile of each user account.
Structure
Login ID
Allows you to:
ARSAdmin
·        Perform administrative activities in MAR.
·        Create and modify development objects in MAR.
·        Modify the password of a user account.
ARSDeveloper
·        Create and modify development objects in MAR.
·        Modify your own password.
ARSUser
·        View development objects in MAR.
·        Modify your own password.
ARSSys
·        Get information about the MAR.
·        Validate MAR users.
ARSdb
Create a DSN for MAR. The default password for this login is arsdb.
Profiles of the Mobile Application Repository
Definition
A profile of the Mobile Application Repository (MAR) is a collection of access rights defined for:
·        Development objects, like tiles, tile sets and business objects of mobile client applications
·        Services of MAR like change lists and namespaces
Structure
The standard profiles that are available are listed below.
Profile name
Associated login ID
Allows you to:
Administrator
ARSAdmin
·        Perform administrative activities like creating and maintaining users.
·        Read and write repository specific information (ARS_SYSTABLE).
·        Create and modify development objects in MAR.
·        Release and revert a change list.
·        Transfer the ownership of objects to another MAR.
·        Create link objects to integrate tile set help.
·        Create and modify framework objects in MAR.
ROGuest
ARSUser
·        View development objects in MAR.
·        Modify your own password.
Developer
ARSDeveloper
·        Read repository specific information (ARS_SYSTABLE).
·        Create and modify development objects in MAR.
·        Release change lists that have been created only by you.
·        Modify your own password.
·        Transfer the ownership of objects to another MAR.
SPDeveloper
ARSDeveloper
·        Read repository specific information (ARS_SYSTABLE).
·        Modify your own password.
·        Create and modify development objects in MAR.
This profile does not allow you to release change lists.
QMResponsible
ARSDeveloper
·        Read repository specific information (ARS_SYSTABLE).
·        Create and modify development objects in MAR.
·        Modify your own password.
·        Transfer the ownership of objects to another MAR.
·        Release and revert change lists.
This profile does not allow you to create a change list.
Coordinator
ARSDeveloper
·        Read repository specific information (ARS_SYSTABLE).
·        Create and modify development objects in MAR.
·        Release and revert change lists.
·        Modify your own password.
·        Transfer the ownership of objects to another MAR.
Frwkuser
ARSDeveloper
·        Read repository specific information (ARS_SYSTABLE).
·        Create and modify development objects in MAR.
·        Release the change list you have created.
·        Transfer the ownership of objects to another MAR.
·        Create and modify framework objects in MAR.
Infodeveloper
ARSDeveloper
·        Read repository specific information (ARS_SYSTABLE).
·        Create and modify development objects in MAR.
·        Release the change list you have created.
·        Create link objects to integrate tile set help.
thanks
karthik
ifhelpfull reward me some points

Question: How to create new user and schema in 11g?

Who can give me answer how to create a new user and schedule?
I had installed oracle 11g DB and oracle client in my windows OS. I found in the 11g there is no enterprise manager console with new version. It is different from with oracle 10g.So i don't know how to create it new user.
I had created new DB instance, but i don't how to create a user on that. Who can give me a hand for that? I hope one oracle experenice expert give my answers.
Thanks a lot!
Edited by: user774630 on Oct 27, 2008 10:01 PM
Edited by: user774630 on Oct 27, 2008 10:09 PM

Hi,
I am not sure that which option you are talking about? Are you using the EMCA,http://download.oracle.com/docs/cd/B28359_01/server.111/b28319/emca.htm#SUTIL800] to create the new repository for the EM? If not the command line than the other only way is to use DBCA(Database Configuration Assistant).I believe you are talking about that. Yes ,if the message is coming creating the repository than after wards you can login to the EM. You would get the port no of the EM's HTTP port from the $OH/install/portlist.ini file.
HTH
Aman....
Edited by: Aman.... on Oct 28, 2008 11:36 AM
Gave up, link insertion doesn't work.

How to create the user on Internet Application Server(IAS) control console

Hi All,
My Client is asking me for How to create the user on Internet Application Server(IAS) control console 10.1.2( 10g release 2).
If anyone have the document for How to Create the User on Internet Application Server (IAS) console 10g release 2 , then please send me the document and help me out from this Concern.
Regards,
Yadav@intelli.
Edited by: 851080 on Apr 8, 2011 6:31 PM

Are you using OID? Can you provide more details about your iAS environment?

How to create new user and How can i assign end user roles

Hi,
I am new to SAP, please explain how to create end users and their roles
Thanks
ravi

Hi,
Roles are decided by IT managers. Suppose if Persons who are working in shopfloor or production side
give authorization to Production order create , change and Confirm like that etc
1. In role maintenance (transaction PFCG), choose the Authorizations tab page.
2. To change the authorization data for the transactions assigned to the role, choose Change Authorization Data or Expert Mode for Profile Generation. Otherwise, a dialog box appears in expert mode (see Regenerating an Authorization Profile After Changes).
Please take telp from Basis person also refer this link,
http://help.sap.com/saphelp_46c/helpdata/EN/52/6714a9439b11d1896f0000e8322d00/frameset.htm
Thanks

How to create Infoset&user group query--(query report)

Hi Guys,
how to create Infoset&user group query--(query report),
Pls send me the exact procedure with Example....
Regards:
Kumar .G

goto SQ03 and create an User Group If U want to create Ur Own.
Goto SQ02 to create Ur Infoset by Giving Logical database name or Simple Database table
Then Choose What ever data U need to be included in The Qurey in field Groups.
Then Generate the Infoset
Now Assign the infoset to user group
Now goto SQ01 and Click on Other user group Button and choose Ur user Group.
Then in the USer group select Ur Infoset and then create Ur own Query and save this.
Now select the infoset query and goto More functions under Query menu and Generate report name.
Now Create a transaction code for the report name generated.
Now use the Tcode.
Hope U have got the basic idea of creating Queries.
~BiSu

How to Block mails for HR only

Dear   expert/guru
    Please let me know how to block mails for HR only.
   We don't want to block mails for all.....

Juan Reyes wrote:
There is no way to block mails based on a "Module", as Olivier said you can only filter mails per domain under the node config in SCOT.
>
> I don't understand why would anyone see a benefit by stopping people on an specific are from receiving mail. In anycase you can stop the SAPCONNECT job and filter the mails to be sent manually from SOST but thats a lot of work!.
>
> Regards
> Juan
>
> PS: Also you can simply stop the jobs creating the "HR mails" in the first place.... huh?
hi,
Issue is given below:
My SAP HR Team has some leave issues.
Due to which they need to stop the triggering of mails for few mins in Production system

How to create mail user who only send or receive email to local user

Similar Messages

Maybe you are looking for