How to create/maintain individual work schedule instead of employee subgr.

Res.all.
We want to create a work schedule for every employee as they may come in any shift.we are implimenting negative time mgt.
As in sap we have to group our employees for work schedule,can anybody guide on this.
Regards
sammeer

Hi Sameer,
Y u Want to go with Individual WSR its impossible to configure.
Do one thing Create all types of shifts and in Period Work Schedule normally u assign it in normal rotation.
Now In your scenario maintain for each employees IT2051 in which his WSR from IT0007 will be maintained directly. Now when an employee changes from the proposed shift then you can directly maintain in IT2051 his actual shift.
Now daily Time administrator should run a report where in he must have all employees actual shift and tell him to directly upload each employee's IT2051.
Try this
Regards
Pavani
Remainder: Reward points if answer is helpful.

Similar Messages

  • How create flxetime in Work Schedule

    the shift schedule for the following timings as Flexi timing is 
    u2022         8.00 am to 5.15 pm
    u2022         8.15 am to 5.30 pm
    u2022         8.30 am to 5.45 pm
    u2022         also i can create (For 1st and 3rd Saturday off , 2nd and 4th Saturday off)
    This shift timings are employee come at any flexi time.

    Dear Satya,
    You can simply create a Daily work schedule with the felxi time and this will solve the problem.
    Under the Customizations:
    Define Daily Work Schedules => Under your Daily work Schedule
    Go to working times tab and here you have the option of Flexi Time
    under the planned working time you enter 8 to 5:45
    Under the core time you enter 8:30 to 5:15
    08:00 - 08:30 : Flextime
    08:30 - 05:15 : Core time 1
    05:15 - 05:45 : Flextime
    This will allow the flexi times, also please read the F1 documentation of the field for more information.
    Regards,
    Shree

  • Problem in creating part time work schedules

    Hello All,
    I have to create some part time work schedules rules for part time employees
    Work: Tuesdays to Fridays
    a)Tues-Thurs 6.5 hours per day   i.e. 9.30 to 5
      9:30 u2013 14:30 work
      14:30 u2013 15:30 - 1hr lunch break
       3:30 u2013 17:00
    b) Friday - 7 hours (9:30 to 14:30)
    Total hours per week are= 26.5
    1) I created one fixed break schedule 14:30 u2013 15:30 (unpaid)
    2) I created 2 Daily work schedules
    Tuesday to Thursday u2013 NOR & (created variant A)
    Only Friday u2013 NOR1
    3) I created one Period work schedule u2013
    P/Time u2013 Mon is FREE, Tue to Thursday as NOR , Fridayas NOR1 & Sat, Sun as FREE
    4) When I try to create Work schedule rule I got stuck in between:
    I configured weekly working hours as 26.5
    I configured monthly & annually working hours.
    But  I had problem to put daily working hours???
    because Tue u2013 Thurs are 19.5 hours (6.5 into 3) & Friday (7Hrs) =26.5
    Hence how to I club both the working patterns in one Work schedule rule???
    Please help me out in same
    Regards,
    Nithi

    niti
    actually i dont have SAP Login here
    in the Table V_T508A
    u define the annul working hours , Monthly working hours  right
    Can u tell wht are the other feilds there
    26.5 hrs is the Combination of two Periodic Work Schedule right ..........if yes
    26.5/31  31 is ur working days
    Edited by: Sikindar on Apr 6, 2009 10:10 AM

  • How to get Work schedule repor of employees

    Hi all
    Can any one help me out in
    how to get work schedule report of employees who are works in different shifts in an organization.
    Thnks in Advance
    Anusha

    Hi Anush,
    Find the SAP Standard reports for Work schedules:
    - PT03 - Display Work Schedule
    - PT63 - Personal Work Schedule (even PT61 also helpful as biswajit said)
    - PT_DSH20 - Daily Work Schedule
    Otherwise you have Time Manager’s Workplace/ Ad Hoc Query reports to view detail reports, which are user friendly for maintain time data.
    TC for Time manager’s workplace is PTMW
    TC for Ad-hoc query is S_PH0_48000513
    I suggest you to go with Ad-hoc and select all fields that what ever output you want and view the results (even you can upload also)
    Cheers,
    TG
    Message was edited by: TG

  • How to create OA Frame Work Jsp through JDeveloper9i

    Hi,
    any one can help me,
    how to create OA Frame Work Jsp through JDeveloper9i.
    and how to depoy that jsp page into oracle application server.
    plse help me,
    Regards
    ravi

    I am also having the same problem.
    can anyone help me out......?

  • How to create Maintainance Plan Which occur every year For particular time duration

    Hello
    I want to create Maintenance Plan which will take full backup Daily Between 1st Oct to 30 July every year.
    Meance plan should execute Only between 1st oct to 30 July every year, It should take backup Daily basis.
    I have seen in sql server we can create Maintainance Plan But If I set Start Date & end Date then after that End Date the plan will never work.
    So Is it possible to setup Maintenance Plan which will occur every year between 1st Oct to 30 July?
    Can you please suggest me some Way for it?
    Thanking you in advance..
    Regards
    Vipul

    Hello
    I have searched for sp_update_schedule store procedure.
    I can not get the roles to make it enable like 
    By default, members of the sysadmin fixed server role can execute this stored procedure. Other users must be granted one of the following SQL Server Agent fixed database roles in the msdb database:
    SQLAgentUserRole
    SQLAgentReaderRole
    SQLAgentOperatorRole
    For details about the permissions of these roles, see SQL Server Agent Fixed Database Roles.
    Only members of sysadmin can modify a schedule owned by another user."
    I am using sa user to login Which is Part of sysadmin But in new query I get error that sp_update_schedule not found.
    I try to add role to sa But Not getting that role.
    Can you please explain me how to do it?

  • How to create a recently worked pages panel

    Hi all,
    I want to create a recently worked pages panel on the left side on the zero page. This will allow users to go back to a previously open page, the last 10 links being maintained. Does anyone has some idea, where apex stores information about the recently opened pages.
    Thanks alot
    With Regards,
    Sunil Bhatia

    hi...thanks for ur help....
    I am using APEX 3.2 and i have got APEX_WORKSPACE_ACTIVITY_LOG in Application express Views.
    How can i use these views in my application. Suppose i have a region in zero page, how can i have most recent viewed pages as hyperlink, so that when any user click on that link it navigates to specific page...thanks once again for ur help
    With Regards,
    Sunil Bhatia

  • How to check the generated work schedules

    Hi Friends,
    We have more than 30 Work schedule rules,  in which some of them have been generated some of not. So now I want to check which work schedules have not been generated. Kindly advice the how can I check the non generated Work schedules or generated work schedule.
    Thanks
    kl

    generally
    We use the following tcodes
    PT01  to generate
    PT02  to change the DWSR
    PT03  to display the DWSR
    more over if u have not generated the Daily work schdule you will get an Error while save DWSR in IT0007  so please check the above tcodes

  • How to create new "Planning delivery schedule instruction"

    Hi All,
    I need new call control parameters created in VA32 for all shipping scenarios.  For some new shipping frequencies. Kindly help how to create.
    Thanks in Advance.

    Tocde: VOZP
    Path: SD->sales->sales doc->sch.agr.with del.sch.-> maintain PDS instruction
    chidambaram

  • How will you generate the work schedule in live system

    How will you generate the live system
    Appreciate for sppedy answer

    Your live system must be open for table changes if you want to generate your work schedule rules - this will need to be done by your basis team.
    Usually, work schedule rules are generated in development and transported through to production.  The generation is performed by using program RPTSHF00 (or transaction code OG00).  You generate as a batch with the 'BTCI = ''/online, ='A' or 'E'"field set to E.  This will save the generation to a transport.  If you have a lot of work schedule rules, you may need to split the generation over more than one transport.
    Regards

  • How to create BP organization from WebIC instead of BP Person.

    Hi,
       I am using the component IUICMDC/SearchAll component/view for searching accounts and as well as creating new accounts of type BP Persons(Partner Category:Person1).Now I want to create New account BP Organization(Partner Category:Organization2) from same IUICMDC/SearchAll.I have enhanced the component and IUICMDC/Searchll,I have provided another button for create organization.Appreciate if anyone can tell me how to handle the Create Organization event handler for creating BP Organization.
    Thanks and Regards,
    Sama.

    Hi Sama,
    Thank you very much for your reply.
    As you said to enhance IUICMDC, SearchAll component. I put a break point there and tested, it never
    stops when i create a Person/Organization/Group. But when i put a breakpoint in
    BP_HEAD_SEARCH/MainSearchResult it stopped. So that means how come Create Person/Organization/Group related to IUICMDC.
    Can you please explain a bit more specifically.
    Sama to be frank, I am new to this technical environment. I even searched steps to create an event handler but in vain.
    Can you please guide me, how to proceed further. It would be a great help from you.
    Thanks in Advance.
    Rohan

  • Issue with respect to Daily work schedule creation for employees in UK Shif

    Hi Experts,
    We are implementing neagtive time management for our client . there are a set of employees who work in UK shift.
    Th shift timings are a bit odd.
    Timings 11:30  to 18:00 is the time when employee has to work at his Office
    and  21:00 to 22:00  he has to work from home
    Please make a note the above given timings is for a single day.
    Please guide me how to go a head.
    Regards,
    Smitha

    Smitha
    Create break schedules as below first
    01     UKBK     01     18:00     18:30               0,50
    01     UKBK     02     18:30     22:00     2,50         
    then create daily work schedule as below
    DWS grouping         01                                       Start         End
    Daily work schedule  UKDW   UK daily Work       01.01.1990 31.12.9999
    Planned working hours               DWS selection rule          01
    Planned working time            -
    Planned working time     11:30  -  22:00
    Normal working time             -
    Core time 1                     -
    Core time 2                     -
    Work break schedule      UKBK
    Hope it will solve your problem.
    Surya

  • How to create 200 individual pdfs instead of 1 pdf with 200 pages? (Page breaks?)

    Hi,
    Is there a way to create multiple reports using SQL Reporting Services (2008 R2) using one dataset, instead of one long report.
    For example, running a batch of customer statements or bills etc.
    At the moment, our report runs well but creates one pdf with 200 pages, instead of 200 individual pdfs with each page being for a different customer.
    I was thinking there might be a page break setting to create separate outputs but haven't been able to find anything.
    Any advice appreciated
    Thanks!
    Lea

    Hi Lea,
    If we want to export the report to the multiple PDF files based on each page, I suggest you can use data-driven subscription which provides a way to use dynamic subscription data that is retrieved from an external data source at run time. For more detail
    information about data-driven subscription, please refer to the following document:
    http://msdn.microsoft.com/en-us/library/ms159150(v=sql.110).aspx
    Besides, we can also use the SQL Server Reporting Services web services to render reports to specify folders. For more details, please see the similar thread:
    http://social.msdn.microsoft.com/Forums/sqlserver/en-US/ecef8799-a0a5-42dd-97f8-bc269a7daa87/ssrs-multiple-pdf-files-for-a-single-report-agent-commision
    Hope this helps.
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • How to create correction delivery in schedule agreement

    Hi all -
    I am loading legacy data into SAP and am creating schedule agreements.  I create the agreement using SD_SALESDOCUMENT_CREATE, then COMMIT, then update the schedule lines using BAPI_SALES_DEL_SCHEDULE_CREATE also followed by a COMMIT. This works, and creates the schedule agreement with schedule lines.
    At this same time, or even in another BAPI or function call if need be, I need to create a CORRECTION DELIVERY for this schedule agreement.  I am populating the CORR_***_QTY_IN and CORR_***_QTY_INX in BAPI_SALES_DEL_SCHEDULE_CREATE  with values in every field, and the return tells me 'CORR_CUMQTY_IN has been processed successfully', but when I look at the schedule agreement in VA32, there is no ***. issued qty or ***. delv qty, and no correction delivery has been created.
    What am I missing??
    Thanks so much...
    Sharon

    Hi Shyam -
    I am calling the BAPI_TRANSACTION_COMMIT function right after the BAPI_SALES_DEL_SCHEDULE_CREATE function.  When I call that create function, I am adding schedule lines, so my return table has all of the other successful messages you would expect -
    ORDER_HEADER_IN has been processed successfully
    CORR_CUMQTY_IN has been processed successfully
    DEL_SCHEDULE_IN has been processed successfully
    SCHEDULE_IN has been processed successfully
    Sched. Agr. w/ Rel. 1030000058 has been saved.
    It even says the corrective *** qty was successful....but when I open the schedule agreement, and go to the Forecast Delivery Schedule tab on the line item, the Cml. iss. qty and Cml. dlv. qty fields are blank, and there are no deliveries associated with the order.
    Do I have to use a seperate BAPI to create the correction delivery?  I've looked at BAPI_OUTB_DELIVERY_CREATE_SLS, but I don't see how to specify that this is a correction delivery and not a 'regular' delivery.
    Thanks,
    Sharon

  • How to create an EHS Work Area on Company Code level?

    Hi,
    Is it possible to create work area on company level?
    (In CBIH02 the EHS work area can only be created within a Plant)
    I had a look at the following transactions related to link a work area to Organization Management, I'm really
    confused and have no idea how to realize it.
    Path: EHS > Industrial Hygiene and Safety > Work Area > Link to Organizational Mangement
    PPSC - Create Structures
    PPSM - Edit Structures
    PPME - Edit Matrixes
    Help is much appreciated.
    Roy Derks

    Hi Roy,
    I doubt on Company Level. As work Area's standard hierarchy goes like that - Work Area -- Plant -- Location -- Production Process -- Activity -- Machine -- Task.
    I would revert back if I could get something.
    Regards,
    Akash

Maybe you are looking for

  • DW 8 Templates in Dreamweaver CS3

    Greetings, I am currently working with a Dreamweaver template (Version 8) and I have recently installed Dreamweaver CS3 to check it out. I wanted to update several pages with the updated template in CS3, but when I tried, I got an error related to ne

  • Preview don't work well in exhibit exif parameters

    If I choose italian language preview don't show exif parameters. Instead if i put english language, all is ok. Someone knows haw resolve this issue? thanks

  • Output / Multiple Monitor from MacBook Pro

    I have a question. I am working with live video production and we want to have our presentation (similar to PowerPoint but a professional live presentation software) sent to two different monitors. The monitor is being sent via thunderbolt then via H

  • Deleted emails on mac don't delete on iphone

    Using Entourage for work email (exchange server) on both Macbook Pro and iPhone 3gs. Everything worked seamlessly til 2 days ago. Now, when i delete an email on my MBP, it doesn't delete on my iPhone. I can, however, delete an email on my iphone and

  • Basic LMS help, or suggestions for other software

    I'm looking for the appropriate software to help me manage my lab.  I'm a bit new to any network managmenet software.  Right now it contains about 20 different switches and routers.  I have DCNM setup for my SAN and Nexus devices and we have deployed