How to create Maintaince View and Help View

Hi,
Can u pls tell me the step by step procedure for how to
create Maintaince View and Help View.
And what's the use of these view's.
Regards,
Kumar

FOR MAINTANENCE VIEW
Create a table or a view in transaction SE11.
A function group in SE80 transaction
1>go to se54 transaction.
2>give the name of the table /view starting from z.
3>select "Generated Objects" radio button.
4>click on "create/change" push button.
5>you get a pop asking you whether to create modules ,click on YES
6>give "authorization group" as temp.
7>give the function group name created by you.
8>click on "find Scr numbers "push button on the application tool bar.
9>in the pop up that you get select the 1st option and press enter
10>click on the create push button (it is beside "Find Scr numbers" push button)
11>selct local object and pres enter.
12>go to SM30 transaction.
13>give the table/view name
14>click on "maitain" push button.

Similar Messages

How to create Header Text and Item view

HI Experts,
Please solve it out.
I need to create a assignment block which display Employee details as per there Role. There are 3 fixed role like Role1 Role2 and Role3. under beneath of each role different user assign.
My requirement is to display the like Header(Roles) and item(user) in Tree form.
The user are in custom database table .
Example
Role1
       User_ID1           User_Name
       User_ID2           User_Name
Role2
       User_ID3            User_Name
       User_ID4            User_Name
       User_ID5            User_Name
Role3
       User_ID6            User_Name
       User_ID 7           User_Name
Please suggest how can i achieve this tast.
Thanks
Imran

Hi Faisal/ Christian,
Thanks a lot lot for you suggestion, its very helpful.
I understand very well, to create Tree view with Access Object and its dependent object.
But my doubth is that in my requirement there is no Access object and dependent object involve, Please follow below points.
In My Object, Predecessor are like Heading text, No data display in predecessor (Role1, Role 2, as shown above in example).
There will be only 3 predecessor in all time.
The Successor value for each Predecessor available in the custom Ztable. and there no BOL object created for this ztable.
Please suggest ,what i need to do to accomplished this object.
I really really appriciate for your advice.
Many Thanks,
Imran

How to create transaction for a maintenance view, Thank you.

How to create transaction for a maintenance view,
Thank you.
deniz...

Hi Deniz,
Go to se93.
Then create the new T.code.
Under that select parameter Transaction.
Then give the sm30 in the t.code in default values tab.
check the checkbox skip initial screen.
in classification tab.
click checkbox inherit gui attributes..
Now below..
In the default values..
select
viewname and give ur table name.
UPDATE= Xsave
view - table name ( Should be upper case
update X ( should be upper case).
http://www.sap-basis-abap.com/sapbs011.htm
Hope this helps you.
Regards,
Viveks

How to create transaction code for maintenance view

hai friends,
i hope every thing goes good.
i have doubt, how to create transaction code for maintenance view. I created view for tranperant table and now i want to create transaction code for the view.
i tried and i donot know the screen number and program name and where can i give the view name.
if any one know please post in details.
thanks in advance.

Hi Elam,
You need to create a "Parameter Transaction".
What this means is that you will have a transaction (let's call it "ZMAINT") which calls "SM30" and passes in your table name.
Go to transaction SE93 and enter your new transaction code. Enter in the Tcode description and choose "Transaction with Parameters" (it shouldbe the last radio button).
Enter in the default transaction "SM30" and tick the "Skip Initial Screen" check box. Hit Enter.
Now scroll to the bottom of the screen and you will see a Table Control where you will need to enter in the values to the SM30 selection screen.
Because you hit ENTER, the program will have loaded in the Selection Screen parameters into it's memory. Hit the drop down for "Name of Screen Field" and select "VIEWNAME" and then enter in your Z Table in the "Value" column.
Now go to the next line and hit the drop down and select "UPDATE" in the "Name of Screen Field". Enter in a "X" in the value column.
Now save the transaction and there you have it.
Hope this helps.
Cheers,
Pat.
PS. Kindly assign Reward Points to the posts you find helpful.

How to create interface where you can view metadata of several databases

How to create interface where we can view metadata of several databases:
Oracle Apex should display metadata of this particular DB (later on we can include multiple DB’s)
          a. Report should first display DB name
          b. When clicked on DB name, should display 3 schemas
          c. When clicked on 1 schema, should display tables – when clicked on each table,
          should display various column names and its corresponding metadata.
          (similarly for other schema’s also)
          d. In short, it should be like a drill down report.
Help required for craeting like above.
Appreciate your help.

I did something similar a while back. I had an application reading from multiple schema's for reporting purposes..IN that case atleast we just would build the selects using a function reurning SQL select, so that we could have an application item with the selected schema they wanted to use to build into the select returned...
For forms, that would be an interesting idea, don't know how you can dynamically change the table owner name, since it is a drop down control in development..
Thank you,
Tony Miller
Webster, TX
I cried because I did not have an office with a door until I met a man who had no cubicle.
-Dilbert
If this question is answered, please mark the thread as closed and assign points where earned..

Maintanence and Help Views!!!!!!

Hello folks,
I have 2 requirements here.
1. I have to create a maintanence view over two tables. For example, I have a table zmara as master data table with material field and zmakt as a material description table. Now I have to create a maintanence view on top of these two tables. If I make an entry for a new material in this view the two tables should be updated.
Can anybody tell me how to do that??
2. How to create a help view??
Points for sure will be rewarded.
Thanks

Naren,
Use SE11 abd choose VIEW Option.
Give View, a Name and choose CREATE.
A small screen with the options
     1. Database View
     2. Projection view
     3. Maintenance View
     4. Help view
   will be displayed.
Choose the required option (either Maintenance View
   or Help view).
And proceed with givening base tables and Join Fileds and View Fields.
Thanks
Kam

What r the trns code for maintenance view, help view and projection view

hi all
what r the transaction code for maintenance view, help view and projection view
can anyone tell me how to create maitenance, help and projection view.
with an example
regs
hari

What is the Different Types and Usage of Views
The followings are different types of views:
- Database View (SE11)
Database views are implement an inner join, that is, only records of the primary table (selected via the join operation) for which the corresponding records of the secondary tables also exist are fetched. Inconsistencies between primary and secondary table could, therefore, lead to a reduced selection set.
In database views, the join conditions can be formulated using equality relationships between any base fields. In the other types of view, they must be taken from existing foreign keys. That is, tables can only be collected in a maintenance or help view if they are linked to one another via foreign keys.
- Help View ( SE54)
Help views are used to output additional information when the online help system is called.
When the F4 button is pressed for a screen field, a check is first made on whether a matchcode is defined for this field. If this is not the case, the help view is displayed in which the check table of the field is the primary table. Thus, for each table no more than one help view can be created, that is, a table can only be primary table in at most one help view.
- Projection View (SE11)
Projection views are used to suppress or mask certain fields in a table (projection), thus minimizing the number of interfaces. This means that only the data that is actually required is exchanged when the database is accessed.
A projection view can draw upon only one table. Selection conditions cannot be specified for projection views.
- Maintenance View ( SE54 )
Maintenance views enable a business-oriented approach to looking at data, while at the same time, making it possible to maintain the data involved. Data from several tables can be summarized in a maintenance view and maintained collectively via this view. That is, the data is entered via the view and then distributed to the underlying tables by the system.
reward points if it is usefull...
Girish

What is the use of Database View, maintenace , projection and Help view

hello friends,
I created tables..and set check table relation.
how to create Database View, maintenace , projection and Help view
phani

Hi,
have a look at this.
4 type of views
database
maintainance
help
projection view
check this link as well
(https://forums.sdn.sap.com/click.jspa?searchID=9904886&messageID=4885135)
Database views are implemented with an equivalent view on the database.
Projection views are used to hide fields of a table (only projection).
Database views should be created if want to select logically connected data from different tables simultaneously.
Database views implement an inner join.
Application programs can access the data of a database view using the database interface. (Just as we write select queries on database tables, we can write them for views as well.)
Includes in Database Views
An entire table can be included in a database view. In this case all the fields of the included table will become fields of the view (whereby you can explicitly exclude certain fields).
To include one of the tables in the view, enter character * in field View field, the name of the table to be included in field Table and character * again in field Field name on the View fields tab page of the maintenance screen of the view.
You can also exclude individual fields of an included table. If you do not want to include a field of the included table in the view, enter - in field View field, the name of the included table in field Table and the name of the field to be excluded in field Field name.
Inserts with Database Views
If a database view contains only one single table, data can be inserted in this table with the view .
You have the following options for the contents of the table fields not contained in the view:
If the field is defined on the database with NOT NULL as initial value, the field is filled with the corresponding initial value.
If the field is defined on the database as NOT NULL without initial value, an insert is not possible. This results in a database error.
If the field is not defined on the database as NOT NULL, there will be a NULL value in this field.
A maintenance view permits you to maintain the data of an application object together.
The maintenance status determines which accesses to the data of the underlying tables are possible with the maintenance view.
Read only: Data can only be read through the view.
Read, change, delete, insert: Data of the tables contained in the view can be
changed, deleted, and inserted through the view.
Read and change: Existing view entries can be changed. However, records
cannot be deleted or inserted.
Read and change (time-dependent views): Only entries whose non-time
dependent part of the key is the same as that of existing entries may be
inserted.
Maintenance View ( SE54 )
You can use a maintenance view to maintain data, which is distributed over several tables, at the same time.
Maintenance views enable a business-oriented approach to looking at data, while at the same time, making it possible to maintain the data involved. Data from several tables can be summarized in a maintenance view and maintained collectively via this view. That is, the data is entered via the view and then distributed to the underlying tables by the system.
Creating maintenance View:
http://help.sap.com/saphelp_nw2004s/helpdata/en/cf/21ecdf446011d189700000e8322d00/frameset.htm
regards,
vipul

Diff bt Help view and Maintanence view

hi gem's
i need the diff bt Help view and Maintanence view with example...............

Hi
The followings are different types of views:
- Database View (SE11)
Database views are implement an inner join, that is, only records of the primary table (selected via the join operation) for which the corresponding records of the secondary tables also exist are fetched. Inconsistencies between primary and secondary table could, therefore, lead to a reduced selection set.
In database views, the join conditions can be formulated using equality relationships between any base fields. In the other types of view, they must be taken from existing foreign keys. That is, tables can only be collected in a maintenance or help view if they are linked to one another via foreign keys.
- Help View ( SE54)
Help views are used to output additional information when the online help system is called.
When the F4 button is pressed for a screen field, a check is first made on whether a matchcode is defined for this field. If this is not the case, the help view is displayed in which the check table of the field is the primary table. Thus, for each table no more than one help view can be created, that is, a table can only be primary table in at most one help view.
Go thru this link plzz
http://help.sap.com/saphelp_nw2004s/helpdata/en/cf/21ecf9446011d189700000e8322d00/frameset.htm
Difference between "Help View" and "Search Help"
- Projection View
Projection views are used to suppress or mask certain fields in a table (projection), thus minimizing the number of interfaces. This means that only the data that is actually required is exchanged when the database is accessed.
A projection view can draw upon only one table. Selection conditions cannot be specified for projection views.
- Maintenance View ( SE54 )
Maintenance views enable a business-oriented approach to looking at data, while at the same time, making it possible to maintain the data involved. Data from several tables can be summarized in a maintenance view and maintained collectively via this view. That is, the data is entered via the view and then distributed to the underlying tables by the system.
Please have a look at below link. It will help you.
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ed06446011d189700000e8322d00/frameset.htm
for more detailed info look on:
http://www.sap-img.com/abap/what-is-the-different-types-and-usage-of-views.htm
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/abap+dictionary&
1.Go to se11
2. select view radiobutton and give a name
3. Create
4. select type of view you want to create. Such as database view.
5. give short description
6. give a table name such as mara
7. press the pushbutton relationship. here you will find all the tables which are allowed to create view with mara.
8. select one or mane tables.
8 copy
9.save , check and activate.
Regards
Anji

HOW TO CREATE A CUSTOMER NO (sales view)THAT STOERS IN KNVV TABLE

HI ,
how to create a customer no(sales view) that stores in tabel knvv, i able to create in kna1 table but not storing in knvv table, please provide with tcode

Hi,
I believe while creating customer you must be maintaining sales area if you are not maintaing then only customer's genaral data will be created and only KNA1 table will be populating.
Rgds
San

Difference among the Help view,Database view and Maintanance View

hi,
can Anyone pls let me know the Difference among the Help view,Database view and Maintanance View
thanks&regards
rama

The followings are different types of views:
Database View (SE11)
Database views are implement an inner join, that is, only records of the primary table (selected via the join operation) for which the corresponding records of the secondary tables also exist are fetched. Inconsistencies between primary and secondary table could, therefore, lead to a reduced selection set.
In database views, the join conditions can be formulated using equality relationships between any base fields. In the other types of view, they must be taken from existing foreign keys. That is, tables can only be collected in a maintenance or help view if they are linked to one another via foreign keys.
Help View ( SE54)
Help views are used to output additional information when the online help system is called.
When the F4 button is pressed for a screen field, a check is first made on whether a matchcode is defined for this field. If this is not the case, the help view is displayed in which the check table of the field is the primary table. Thus, for each table no more than one help view can be created, that is, a table can only be primary table in at most one help view.
Go thru this link plzz
http://help.sap.com/saphelp_nw2004s/helpdata/en/cf/21ecf9446011d189700000e8322d00/frameset.htm
Difference between "Help View" and "Search Help"
Projection View
Projection views are used to suppress or mask certain fields in a table (projection), thus minimizing the number of interfaces. This means that only the data that is actually required is exchanged when the database is accessed.
A projection view can draw upon only one table. Selection conditions cannot be specified for projection views.
Maintenance View ( SE54 )
Maintenance views enable a business-oriented approach to looking at data, while at the same time, making it possible to maintain the data involved. Data from several tables can be summarized in a maintenance view and maintained collectively via this view. That is, the data is entered via the view and then distributed to the underlying tables by the system.
Please have a look at below link. It will help you.
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ed06446011d189700000e8322d00/frameset.htm
for more detailed info look on:
http://www.sap-img.com/abap/what-is-the-different-types-and-usage-of-views.htm
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/abap+dictionary&
1.Go to se11
2. select view radiobutton and give a name
3. Create
4. select type of view you want to create. Such as database view.
5. give short description
6. give a table name such as mara
7. press the pushbutton relationship. here you will find all the tables which are allowed to create view with mara.
8. select one or mane tables.
8 copy
9.save , check and activate.
The followings are different types of views:
Database View (SE11)
Database views are implement an inner join, that is, only records of the primary table (selected via the join operation) for which the corresponding records of the secondary tables also exist are fetched. Inconsistencies between primary and secondary table could, therefore, lead to a reduced selection set.
In database views, the join conditions can be formulated using equality relationships between any base fields. In the other types of view, they must be taken from existing foreign keys. That is, tables can only be collected in a maintenance or help view if they are linked to one another via foreign keys.
Help View ( SE54)
Help views are used to output additional information when the online help system is called.
When the F4 button is pressed for a screen field, a check is first made on whether a matchcode is defined for this field. If this is not the case, the help view is displayed in which the check table of the field is the primary table. Thus, for each table no more than one help view can be created, that is, a table can only be primary table in at most one help view.
Go thru this link plzz
http://help.sap.com/saphelp_nw2004s/helpdata/en/cf/21ecf9446011d189700000e8322d00/frameset.htm
Difference between "Help View" and "Search Help"
Projection View
Projection views are used to suppress or mask certain fields in a table (projection), thus minimizing the number of interfaces. This means that only the data that is actually required is exchanged when the database is accessed.
A projection view can draw upon only one table. Selection conditions cannot be specified for projection views.
Maintenance View ( SE54 )
Maintenance views enable a business-oriented approach to looking at data, while at the same time, making it possible to maintain the data involved. Data from several tables can be summarized in a maintenance view and maintained collectively via this view. That is, the data is entered via the view and then distributed to the underlying tables by the system.
Please have a look at below link. It will help you.
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ed06446011d189700000e8322d00/frameset.htm
for more detailed info look on:
http://www.sap-img.com/abap/what-is-the-different-types-and-usage-of-views.htm
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/abap+dictionary&
Go thru this link plzz
http://help.sap.com/saphelp_nw2004s/helpdata/en/cf/21ecf9446011d189700000e8322d00/frameset.htm
Difference between "Help View" and "Search Help"
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ed06446011d189700000e8322d00/frameset.htm
Hope this is helpful, Do reward

How to create dynamic connection in business view manager.

Hi Sir,
Can u explain how to create dynamic connection in business view manager.
Thanks
Vishali Raghava Raju

HI Vaishali,
Can you please elaborate your requirement ?
-Regards
B

How can the info block be assigned with the view and assign view to users.

Dear Friends,
Anyone could plz tell me how can the info block be assigned with the view and assign view to users. Also how can the info block in sale summary be assigned with a view and how to assign this view for user.
Regards,
Ashima

Hi,
To define view and to make it default
Goto SAP IMG > Sales and Distribution > Sales Support (CAS) > Sales Summary > Define Reporting Views (Tcode:OVCD).
To assign default user to the view.
Goto SAP IMG > Sales and Distribution > Sales Support (CAS) > Sales Summary > Assign Default View To User (Tcode:OVCC).
To assign Elements of SAPScript "SD-SALES-SUMMARY" to information Blocks To A View use
Goto SAP IMG > Sales and Distribution > Sales Support (CAS) > Sales Summary > Assign Information Blocks To A View (Tcode:OVCB).

How to create a drag and drop video playlist Help please

I would like to learn how to create a drag and drop video playlist.
I think the most common example is youtube.
I already have partial of the work but I am stuck with my preliminary knowledge of Flash.
What I am saying is:
I have a *.fla project that have the galleries for video and pictures.
But this process is done from the back end.
I would like to make it more dynamic for the visitors.
For example:
1. Create a visitor video (pictures) playlist
2. Drag and drop into the playlist
3. To be able to create different playlists (Playlist 1, "My favorite playlist", "Watch later", etc)
If someone knows or want to guide me where or how to find this request, I'd appreciate it so much.
If the forum think that this need to be address to a expertise ($). I am also welling to hear that and where to go.
If someone is interesting in this project please send me a note to show the prelimary project.
Thanks

Yeah that is the general idea but that is more of a "lift and drop", i want to add the same thing as when you:
Right click this window in the taskbar (assuming your using windows) when the window is not maximized and click "move" then it changes the cursor icon and allows u to move the window around and while you move it around it shows the window moving, not a click and release feature.
So i want that ability without having to click on the title bar, if you know what i mean.

How to create process chains,and how to use process like and or xor

Hi,
How to create process chains,and how to use process like and or xor.
can any one please give me a example in each.
Thanks,
cheta.

Hi Cheta,
Here is step by step procedure to create process chains
Process chain is nothing but executing a process ..(or) loading the data any process we can do in background.. that means.. automatically we can execute our process based on Time or any event..
Creating Process Chains
Prerequisites
If you want to include a load process in the process chain, you need to have already created an InfoPackage.
You cannot load flat file data from a client workstation in the background. For this reason, you have stored your data on an application server.
Creating Process Chains
You have the option of creating a process chain in the process chain maintenance screen directly or by using a maintenance dialog for a process:
Creating a Process Chain Directly in the Process Chain Maintenance Screen
You are in the BW Administrator Workbench.
1. Click on the Process Chain Maintenance icon in the AWB toolbar.
The Process Chain Selection dialog window appears.
2. Choose Create.
3. Enter the technical name and a description of the chain, and confirm your entry.
The Add Start Process dialog window appears.
4. Create a variant for a start process.
1. a. On the Maintain Start Process screen, choose whether you want to schedule the chain directly or whether you want to start it using a metachain.
2. b. If you choose to schedule the chain directly, enter the start date value for the chain under Change Selections and save your entries.
The Maintain Start Process screen appears again.
3. c. Save your entries, return to the previous screen and confirm your entries in the Add Start Process dialog window.
You are taken to the Plan View of the process chain maintenance screen.
In the left-hand area of the screen, a navigation area is displayed. In the right-hand area of the screen, the process chain is displayed.
5. Use the drag-and-drop function to add the relevant processes into your process chain.
You use the Process Types function to select the processes. This sorts the process types according to different categories. You can also call up InfoPackages and processes for the data target from the separate InfoSources and Data Targets navigation trees.
Hope this helps
Regards
Karthik

How to create Maintaince View and Help View

Similar Messages

Maybe you are looking for