How to create matrix template help pls

hi frs,
i have generated xml file after creating matrix report in report builder.
i want to know how to create matrix template(rtf) in word document.
if i use wizard or insert> all fields i am not getting rtf like matrix.
help pls
Thanks
Rajesh

This issue is really becoming a problem for us. Does anyone have any examples of label templates. The label when generated automatically converts from pontrait to landscape. If you increase the size of the template then word complains about the page and margin size before printing.
Anyone have any ideas?
Thanks

Similar Messages

What are the uses of MVC, Extension and how to create it for begineers pls

what are the uses of MVC, Extension and how to create it for begineers pls
dont give link for tutorials please explain ,
thank you,
Regards,
Jagrut BahratKumar Shukla

Hi,
Check out this link :
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/0f/ab3a3c9ca75402e10000000a114084/content.htm">http://help.sap.com/saphelp_nw04/helpdata/en/0f/ab3a3c9ca75402e10000000a114084/content.htm</a>
It is the best possible explanation and documentation that you'll get.
Thanks,
Tatvagna.

How to create Matrix with Group report layout in xml

Hi,
i would be glad if anyone could tell me How to create Matrix with Group report layout in xml?
Here i am attaching the required design doc
below is the code
select COST_CMPNTCLS_CODE,
-- crd.RESOURCES,
NOMINAL_COST,
cmm.COST_MTHD_CODE,
-- crd.COST_TYPE_ID,
gps.period_code
-- ORGANIZATION_ID
from CM_RSRC_DTL crd,
gmf_period_statuses gps,
CM_MTHD_MST cmm,
CR_RSRC_MST crm,
CM_CMPT_MST ccm
where gps.period_id = crd.PERIOD_ID
and crd.cost_type_id = cmm.cost_type_id
and crd.RESOURCES = crm.RESOURCES
and crm.COST_CMPNTCLS_ID = ccm.COST_CMPNTCLS_ID
and gps.period_code in (:p_period1, :p_period2, :p_period3)
group by COST_CMPNTCLS_CODE, cmm.COST_MTHD_CODE, gps.period_code,NOMINAL_COST
order by 1,2,3,4.
The o/p of the report shoud be as given below
          Period-1     Period-2     Period-3     Period-4
COMPONENT
LABOUR - DIRECT
     Actual     1     2     3     4
     Actual Rate     10     10     10     10
     Standard Rate
     Var%
DEPRICIATION-DIRECT
     Actual
     Actual Rate
     Standard Rate
     Var%
OVERHEAD - DIRECT
     Actual
     Actual Rate
     Standard Rate
     Var%
LABOUR - IN DIRECT
     Actual
     Actual Rate
     Standard Rate
     Var%
Thanks in advance

Your friend is obviously not a reliable source of HTML
information.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Mr.Ghost" <[email protected]> wrote in
message
news:f060vi$npp$[email protected]..
> One of my friends advised me to develop my whole site on
the layout mode
> as its
> better than the standard as he says
> but I couldnot make an ordinary table with rows and
columns in th layout
> mode
> is there any one who can tell me how to?
> thanx alot
>

How to create rtf template to view report in Word and Excel, with numeric f

Hi,
Please help me!
How to create rtf template to view report in Word and Excel, with numeric formatted fields (like this 999 999 999,99 with spaces between numbers) and then end user be able to process those fields with Excel tools (sum, etc).
Thank you.

From what I have seen Excel can not handle 999 999 999.00. You can use 999999999.00 and then format it as you want in the xls bt you can not have values like 999 999 999.00 coming from publisher output and have functions on the values in Excel
Tim

How to create personal templates in SRM 4.0

Dear all
We are upgrading from EBP 3.0 to SRM 4.0 and we don't see in SRM 4.0 how to create personal templates.
The transaction BBPSC05 Create template create central/public templates and not personal ones (also if given to a basic user).
1) In the Shopping Cart we can go to Old Purchase Order and Tempaltes and there we can select on status Personal Template but were can we create them?
2) Additional question, how can we limit the availability of a public/central template to a certain users from some company or plant or ...
Thanks

Hi RD,
1) for detailed explanations read my answer in this thread:
SRM 4.0 Shopping cart templates
2) such limitation does not exist in SRM, even if often asked by customers: the possibility to maintain templates centraly at a level between the public (every user can see them) and the private template (only the user can see them). So you would have to change the standard search logic on templates, and implement an additional serach criteria.
Rgds
Christophe
PS: please reward points for helpful answers

How to create a Templates for Categories and Products In BCC

Hi All,
Could you please tell me How to create a Templates for Categories and Products In BCC and how Can I get those Templates details(Categories and Products)in jsp
If possible can any one send the document or where we find in atg docs
Regards,

At product/category/sku level there is a property called template.
Find the property in ACC/BCC and provide all the values including the URL property.
In you jsp, you can use this property from product/sku like the way you retrieve any other property from sku/product.
<dsp:valueof param="product.template.URL" />
Using that property with <dsp:include> includes that page.
Peace
Shaik

How to create generic search help in wd abap

Hi experts,
How to create generic search help in wd abap.
Regards...
Arun.

Hi Arun,
Following links have step by step procedures for creating search helps and other related topics.
<a href="http://help.sap.com/saphelp_nw04s/helpdata/en/3d/e53642e2a3ab04e10000000a1550b0/content.htm">ABAP Dictionary Search Help for WD</a>
<a href="http://help.sap.com/saphelp_nw04s/helpdata/en/9b/c51c42735b5133e10000000a155106/content.htm">Input Help in WD ABAP</a>
<a href="http://help.sap.com/saphelp_nw04s/helpdata/en/cf/21ee2b446011d189700000e8322d00/content.htm">Search Helps</a>
<a href="http://help.sap.com/saphelp_nw04s/helpdata/en/cf/21ee5f446011d189700000e8322d00/content.htm">Creating Elementary Search Help</a>
Regards,
Neha
<i><b>PS:Reward if helpful</b></i>

How to create a template for pages in a book

How to create a template in Pages to create camera ready pages for publishing a book?

Nothing is "camera ready" these days, it is all digital.
What is it you need to know, a book can take many forms.
Does it contain color photos, spot colors, purely black ink etc?
Peter

How to create customized F4 Help of InfoObject in BW

Hi, buddies
Does anyone know how to create customized F4 help for an InfoObject?
What I need to do is when user clicks F4 help on the variable screen of query, only certain master data values should be displayed, not all of them.
Currently, I can only make setting in InfoObject to restrict the F4 value either in master data or in Cube. I couldn't create a customized F4 value list.
Thanks,
Wei

Hi,
i have H4 Help problem.
how can i restrict an attributes of infoobject in H4 Help value.
Please help me
Madhu

How to create an search help for standard Screen

Hi,
Can any one help me out ... How to create a search help for standard screen field.......
thanks & regards,
Naveen...

Hi Naveen.
I would like to suggest a couple of references,
[SDN - Standard Reference for create a search help for own fields in selection screen |How to create a search help for my own fields in selection screen;
[SDN - Standard Reference for Attaching search help to standard screen|Attach search help to standard screen;
[SDN - Reference for want to add a field in standard search help screen|want to add a field in standard search help screen;
[SDN - Reference for Attaching a search help to a standard screen - Case 2 |attaching a search help to a standard screen;
Hope that's usefull.
Good Luck & Regards.
Harsh Dave

Basic question, how to create rtf template with a given xml file

Hello guys
I am new to BI publisher and I am learning how to create rtf templates using given xml fiel definitions by following the bi publisher guide
The steps I am following is:
1, create template using template builders, which is downloaded into MS words.
2, In the empty template, map the xml columns with template field using BI publisher tag
3, upload the template to BI Publisher as a layout.
That's all I can understand.
My question is:
1,in which above step do I import XML file into template builder (if not bi publisher), how to do so?
2,After template is created, how to associate this template layout with existing reports in BI Publisher, or is it necessary at all?
3,In the template content in MS Word template builder, what should I enter other than BI publisher tags for mapping XML field to desired template field
Or, if my understand of this process is entirely wrong, what's the right process of creating rtf template with a given XML file definition
Thanks

If you have a BI Publisher desktop installed, have a look a the demos,.. should answer most of your basic questions.
(Windows) Start->Programs->Oracle BI Publisher Desktop->Demos
Invoice Demo - good one for those with E-Business Suite
Report Demo - Sample using BI Publisher

How to create Matrix report in 9iAS portal

Could u pls explain with an example how to create an Matrix Report using Web Portal wizard bcos I need to create many complex reports with user parameters where I am not getting flexibility in WebDb to create such reports.
Thank you

Hi,
to make a matrix you will have to know the column values of your matrix. If this is known then you can use decode in your select statement to format the columns of your matrix. An example for selecting the salaries per department and per ename would be as follows:
select ename,
decode(deptno, 10, sal) d10,
decode(deptno, 20, sal) d20 ,
decode(deptno, 30, sal) d30 ,
decode(deptno, 40, sal) d40
from emp
group by ename, deptno,sal
Hope this helps,
kind regards,
Frank van der Borden
Oracle support services

How to create a serach help

Hi Guys
Could you please explain me in detail the steps involved in
creating a dsearch help
Thanks in advance

1) Elementary search helps describe a search path. The elementary search help must define where the data of the hit list should be read from (selection method), how the exchange of values between the screen template and selection method is implemented (interface of the search help) and how the online input help should be defined (online behavior of the search help).
2) Collective search helps combine several elementary search helps. A collective search help thus can offer several alternative search paths.
3)An elementary search help defines the standard flow of an input help.
4) A collective search help combines several elementary search helps. The user can thus choose one of several alternative search paths with a collective search help.
5)A collective search help comprises several elementary search helps. It combines all the search paths that are meaningful for a field.
6)Both elementary search helps and other search helps can be included in a collective search help. If other collective search helps are contained in a collective search help, they are expanded to the level of the elementary search helps when the input help is called.
CREATION:
Go to SE11 Tcode
select search help
give the 'z' search help name and create
select the selection method ur table name eg : 'mara'
dialog module 'display value immediately'.
add the field whatever u want and lpos = 1 and spos = 1 and check import and export parameter.
where left position when displaying and spos = search position
and then save and activate ..
See the links:
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee38446011d189700000e8322d00/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee45446011d189700000e8322d00/content.htm
https://forums.sdn.sap.com/click.jspa?searchID=3173469&messageID=2176485
https://forums.sdn.sap.com/click.jspa?searchID=3173469&messageID=3601619
pls go through this for search help creation
http://help.sap.com/saphelp_nw2004s/helpdata/en/41/f6b237fec48c67e10000009b38f8cf/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee2b446011d189700000e8322d00/content.htm
Search Help Exits:
Creating Elementary Search Helps
Procedure
In the initial screen of the ABAP Dictionary, select object class Search help, enter the name of the search help and choose Create.
A dialog box appears in which you must select the type of search help.
Select Elementary search help and choose .
The maintenance screen for elementary search helps appears.
Enter an explanatory text in the field Short text.
You can for example find the search help at a later time using this short text.
In the Definition tab page enter the selection method of the search help.
You can enter the name of a table or a view (database view, projection view or help view) here. If you enter a table that has a text table, the name of the text table is automatically entered in the corresponding field.
Using the input help (F4 help), select fields of the selection method as parameter in the Search help parameter area. Select the fields that should be used in the dialog box for value selection or in the hit list.
If the selection method is a table that has a text table, both the fields of the table and the fields of the text table are offered in the input help.
The data element of the parameter is automatically copied from the selection method. The data element defines the output attributes and the F1 help of the parameter in the hit list and in the dialog box for value selection.
You can assign the parameter another data element. To do so, select the Mod flag. The Data element field is now ready for input. Then select a data element with the input help (F4 help). Only data elements whose data type, length and number of decimal places is the same as those of the previous data element can be assigned.
This removes the link between the data element of the search help parameter and the data element of the selection method field having the same name. If you cancel the Mod flag, the data element of the assigned table field is used again.
Define the attributes of the search help parameters.
Select the IMP flag if it is an import parameter. Select the EXP flag if it is an export parameter.
You can define the dialog for the input help with the fields LPos, SPos and SDis. Enter the parameter position in the hit list in LPos. If you enter nothing or the value 0 here, the parameter is not displayed in the hit list.
Enter the parameter position in the dialog box for value selection in SPos. If you enter nothing or the value 0 here, the parameter is not displayed in the dialog box for value selection.
Set the SDis flag if the parameter should be a pure display field in the dialog box for value selection. The user is thus informed that the contents of the parameter restrict the value, but he cannot change this restriction. This makes sense for example when the parameter is an import parameter or if it has a default value.
You can assign the parameter a default value in the Default value field.
Select the dialog type of the search help.
The dialog type defines how the hit list is displayed in the input help.
Save your entries.
A dialog box appears in which you have to assign the search help a development class.
Choose .
Do not forget to link the search help to a screen field. The search help attachment is not part of the search help definition; it is part of the object definition to which the search help is attached.
Result
The search help is activated. You can find information about the activation flow in the activation log, which you can display with Utilities ® Activation log. If errors occurred during activation, the activation log is automatically displayed.
Other Options
Assign a hot key: If the search help is to be accessed with a hot key, you must enter a one-place ID in the Hot key field. All the elementary search helps contained in a collective search help should have different short cuts.
Assign a search help exit: In exceptions, you might have to change the standard flow defined by the search help with a search help exit. In this case enter the name of the search help exit in the corresponding field.
Test the search help: You can test the flow of an input help defined by the elementary search help with . A dialog box appears in which you can simulate the behavior of the search help under different conditions. You can obtain information about the options provided in this window with .
http://help.sap.com/saphelp_erp2005/helpdata/en/cf/21ee5f446011d189700000e8322d00/content.htm

How to create activity template for email campaign in CRM 5.0

Hi,
I tried attaching only a simple activity transaction type (Z005) to communication type email in SPRO > CRM > Marketing > Marketing Planning and Campaign Management > Campaign Execution > Define communication medium.
After doing this, I was expecting that when I execute my campaign for channel email, emails will be sent to the customers and activity transactions of type Z005 will be created for each outbound email.
Activity transactions are created, but I think I would like to maintain more details (description, responsible org etc.), which should be possible using activity template.
I am struggling with creating activity template. I created a normal transaction of type Z005 and tried to maintain it as a template (which was obviously wrong), and the system gave me a message that I need to attach a template transaction of template type D.
How do I create an activity template of type D?
Any help would be appreciated.
Regards,
Kaushal

Hi Kushal,
As your are in CRM 5.0 you can create Activity template from SAP GUI. Just execute CRMD_ORDER and select your Activity type (ZOO5) and in Menu click on Extras->Template->Create just enter required details such as (description, responsible org etc.) save the template it will create Activity template number. While creating Email Campaign just enter activity template number.
Execute Email Campaign it should create Activity with required details.
Regards,
Dipesh.

How to create a template like JFrame Form in netbeans?

Hi! I'm working with netbeans 5.5.1 jdk 6 and i'm trying to make my own JFrame form template to avoid writing a lot of code.
I look in the Template manager and add my template but when i add it to the template list it appears like ".java" extension, no matter if i choose the .FORM file. This bring me the problem that i can't use the netbeans GUI editor on this template and is my goal :S
It may be a simple question but i haven't found anything to solve it,
If anyone knows how to create and use the templeate as i need i would appreciate the help!
Thanks a lot!

I'm sure that someone at the NetBeans website mailing list knows how to do that. Do note that these are Java forums, not NB support.

How to create matrix template help pls

Similar Messages

Maybe you are looking for