How to create midlet file in j2se project ?

Hi All,
I am new in j2me. My main aim is Send the data mobile to Pc and Vice versa.
I am using windows xp, Nokia E50 , netbeans 6.1 IDE.
My requirement is , I want set Pc as server and Mobile is client,
now i want to create 2 project or I can manage single class,
In Netbeans Pc server program developed by j2se and Mobile client is Mobility application.
It is possible to both are created at a same project ? .
I want to created the midlet class is created on j2se project and while run my midlet from j2se project midlet was run
on WTK Emulator.
Please any one tell me, my requirements are possible, if yes then how to implement both are same project,
Thanks is advance,
With Regards,
Ganesh kumar

Hi Martin,
> you can add a data-source-aliases.xml file to your
> META-INF folder
> so what is the name of the Default datasource?
See http://help.sap.com/saphelp_nw04/helpdata/en/c3/4f7770b21b9f459cb13424296726b1/frameset.htm - you can generically use a variable.
> is this applicable to EP projects?
I won't expect this (as a portal project isn't a J2EE application itself but part of another).
Anyhow, the datasources (and with them their alias within the J2EE engine) are managed via VisualAdmin, see http://help.sap.com/saphelp_nw04/helpdata/en/11/4963a6cf52ad429b3b3b65e003f2d1/frameset.htm
Hope it helps
Detlev
PS: Please consider to reward points if answers are helpful. Thanks in advance!

Similar Messages

How to Create Executable file for a project for Crio Platform

hi,
i am using CRIO 9014 platform for my application development.
i am controlling ( Reset & then Run ) FPGA from RT application .
Through TCP/IP communication the Acquired data ( from FPGA then followed by some Computation Logic in RT ) is sending to HOST computer .
during the above process
First i am starting the RT Application ( the TCP network will be continuously in listen mode ) then
i am starting my HOST Application in the project .
here i want to build my complete project as an executable file
so that i no need to start RT Application first and then HOST Application.
Could you please send me One sample Project with built in simple ADC Acquisition loop / logic in FPGA , then one sample logic / while loop in RT to acquire this ADC data from FPGA and send to HOST via TCP/IP network then the HOST with GUI for Display in the HOST .
This complete project should be build in .exe file .
Please complete project files and .exe file as a zip file.
Regards,
Venkat

Hi,
I might be confused but what I understand from what you have mentioned is that you want to create a project having two VI's. One running on your FPGA target and another running on you host computer.You want to build a single executable file to complete the entire operation.
Unfortunately you cannot have both VI's in same executable file. You can build one executable file and deploy on your FPGA target that will start running as soon as the target is booted. And you can create another executable file for running VI on your host computer. And instead of using TCP to transfer data, you could use "Interface FPGA" from FPGA module to communicate between your host computer and communicate.

How to create a file in the server?

Hi,
I'm making a webservice that has to generate a XML file, sign it using another webservice and return this XML. The problem is that i don't know how to create the file in the server throught webservice.
I use this code in the webservice to generate the XML and after I return the XML to client in a byte[]
 static void outputDocumentToFile(Document myDocument, String path) {
 //setup this like outputDocument
 try {
 // XMLOutputter outputter = new XMLOutputter(" ", true);
 XMLOutputter outputter = new XMLOutputter();
 //output to a file
 FileWriter writer = new FileWriter(path);
 outputter.output(myDocument, writer);
 writer.close();
 } catch(java.io.IOException e) {
 e.printStackTrace();
 }But the file is generated in the client-side, how can I generate the file in the server-side?
Thanks very much.

Well the File object doesn't create a file it's simply an abstract representation of file and directory pathnames.
You can try something like this:
<%
try
// get the path to the web server root
// I read somewhere not to use 'getRealPath' for some reason which I
// can't seem to remember :S Hopefull someone can enlighten us :)
String path = application.getRealPath("/project/jsp/demo.txt");
File file = new File(path);
PrintWriter writer = new PrintWriter(new BufferedWriter(new FileWriter(file)));
writer.println("Hello World!");
writer.close();
catch (Exception e)
System.err.println(e.getMessage());
%>
Hope this helps :)

How to create trial version in oracle project

assalamualikum and hi ..
sir how to create trial version in oracle project
i want to
anyone use my oracle (forms) project for some limited time..
and then expire after some time..

ummm...you test it using the UTL_FILE package.
BTW...you can also spool text files out of SQL*Plus on your local machine, without even needing UTL_FILE. but if you need to create files on a server, then UTL_FILE is the way to go.

I am working in windows 7 and I am trying to enable the copy/paste and I can not find user.j file in the profile and I am not real sure how to create a file, I can create a folder .

I am trying to copy text from a word document and paste it into my web builder and it says that firefox does not support copy/paste from clipboard. Went to your site and it tells me to open the user.j file in my profile. This file does not exist and I am not real sure how to create that file so I can paste the fix from your site into it.

I went to that link and added to firefox add on but it still does not work. I went to the add on option button for this but it told me that my MYSIWG widget was disabled. Does this have something to do with it not working and if so how do you enable it.

How to create a new Oracle OSB project automaticaly with script without IDE

Hello,
I want to create automatically an "Oracle service bus project" and an "Oracle service bus configuration project" with scripts (ANT or Maven or ...) without using IDE, without using workshop or Eclipse. I want to create automatically (ANT or Maven) just a skeleton of an OSB project witch i can use after in workshop.
I want to create 1 "Oracle service bus configuration project" with many "Oracle service bus project" automatically (ANT or Maven or scripts) witch i can use after in workshop. How to create a new Oracle OSB project automaticaly with script without IDE ? How can i do this ?
I'm using Oracle service bus 10.3.1
Thank you for your help.

Thank you for your response,
I do not want to just create the services (proxy services and business services) but I want to create a template for 40 OSB project with the same scripts ANT/Maven.
Template="Oracle service bus configuration project" + "Oracle service bus project" + services of 40 OSB projects
The goal is that I have more than 40 projects to create and just the name of the projects that changes (when I say the name of the project ie the name of the OSB project, the name of proxy services and the name of business services ).
So I want to give my script (ANT/Maven) the name of 40 OSB project and the script must generate the skeleton of the 40 projects at once time and after generation of skeleton of the 40 project, I will import them in the workshop to add manually mapping and routing and other things that differs from one project to another.
So i want to generate automatically a skeletons of 40 OSB projects using a script (ANT / Maven) and I give to the script juste the names of the 40 projects.
I want to create a "Oracle service bus configuration project" and "Oracle service bus project" automatically of 40 OSB projects (ANT or Maven or scripts) witch i can use after in workshop.
I want to create one 'template' of all 40 projects in the same time, with the same directory structure (Transforlation, Business services, proxy services, WSDL .....) and all 40 project have the same transport, just the names of projects and services witch changes and i can give to the script all names of projects and services and i can give also all WSDL.
Regards,
Tarik

How to create txt file in utf-8?

Hi,
if i create a txt file using vb in fdm, it is created with the ansi encoding. Is there any option how to create this file in utf-8?
Thx

Forms6i uses Oracle 8.0.6 client libraries. MetaLink Note 207303.1 lists supported client/server configurations, and the last database version supported with those libraries is Oracle 9.2. The only exception is made for e-Business Suite (Oracle Applications). Therefore, you configuration is not supported.
Anyway, Oracle 8.0.6 does not support AL32UTF8 well. You should select UTF8 as the database character set (not national character set!). You need to select a check box on DBCA interface (possibly unavailable in fast/default installation path) which allows you to see non-recommended character sets.
-- Sergiusz

How to create backup file on itunes for ipod touch 4g game apps data? Is there a way to do it? I want to try an app on my friend's computer, but you can't add apps on another computer without having your own ipod's data being deleted. Thx for any help!

How to create backup file on itunes for ipod touch 4g game apps data? Is there a way to do it? I want to try an app on my friend's computer, but you can't add apps on another computer without having your own ipod's data being deleted. Thx for any help!
I want to know how to create a backup file (because I'm pretty new with itunes, and it's hard to use it for me still), how to store my app data/media/videos, etc. And how I can retrieve them back when I'm done with the app I tried on my friend's computer.
If anyone can help, it'd be great! Thank you so much!

Sure-glad to help you. You will not lose any data by changing synching to MacBook Pro from imac. You have set up Time Machine, right? that's how you'd do your backup, so I was told, and how I do my backup on my mac. You should be able to set a password for it. Save it. Your stuff should be saved there. So if you want to make your MacBook Pro your primary computer, I suppose, back up your stuff with Time machine, turn off Time machine on the iMac, turn it on on the new MacBook Pro, select the hard drive in your Time Capsule, enter your password, and do a backup from there. It might work, and it might take a while, but it should go. As for clogging the hard drive, I can't say. Depends how much stuff you have, and the hard drive's capacity. As for moving syncing from your iMac to your macbook pro, should be the same. Your phone uses iTunes to sync and so that data should be in the cloud. You can move your iTunes Library to your new Macbook pro
you should be able to sync your phone on your new MacBook Pro. Don't know if you can move the older backups yet-maybe try someone else, anyways,
This handy article from Apple explains how
How to move your iTunes library to a new computer - Apple Support''
don't forget to de-authorize your iMac if you don't want to play purchased stuff there
and re-authorize your new macBook Pro
time machine is an application, and should be found in the Applications folder. it is built in to OS X, so there is nothing else to buy. double click on it, get it going, choose the Hard drive in your Time capsule/Airport as your backup Time Machine and go for it. You should see a circle with an arrow on the top right hand of your screen (the Desktop), next to the bluetooth icon, and just after the wifi and eject key (looks sorta like a clock face). This will do automatic backups of your stuff.

How to create xml file from Oracle and sending the same xml file to an url

How to create xml file from Oracle and sending the same xml file to an url

SQL/XML (XMLElement, XMLForest, XMLAgg, etc) and UTL_HTTP.
Whether that works for you with the version of Oracle you have, your requirements, and needs is another story. A little detail goes a long way.

How to create pdf files in UNIX directory from oracle reports

I would like to know how to create pdf files in UNIX directory from oracle reports.
Thanks,

Please make your question more clear . Also mention the reports version.
1) If you are runnning reports in Unix, you can give
.... destype=file desformat=pdf desname=<filename>
in command line
Please refer docs below.
2) If by your question you mean
"My reports server is running in Windows but I want to ftp my files to Unix after creating it"
then the answer is that you can use pluggable destination "ftp"
.... destype=ftp desformat=pdf desname=<ftp url>
Pluggable destinations download
http://otn.oracle.com/products/reports/pluginxchange/index.html
Thanks
Ratheesh
[ All Docs ]
http://otn.oracle.com/documentation/reports.html
[ Publishing reports to web - 10G ]
http://download.oracle.com/docs/html/B10314_01/toc.htm (html)
http://download.oracle.com/docs/pdf/B10314_01.pdf (pdf)
[ Building reports - 10G ]
http://download.oracle.com/docs/pdf/B10602_01.pdf (pdf)
http://download.oracle.com/docs/html/B10602_01/toc.htm (html)
[ Forms Reports Integration whitepaper 9i ]
http://otn.oracle.com/products/forms/pdf/frm9isrw9i.pdf

How to create temp files in temp tablespace

Dear all,
Due to outage of our SAN, we our out of production for the
last 3 days. By the grace of Almighty we have restored production by
database recovery from our standby backup. Since temp tablespace and
temp data files do not taken as backup for standby, now after recovery
we are getting abap dumps asking for temp_1 and temp_2 datafiles.
Please guide us how to create temp files. v$tablespace is showing tablespace PSAPTEMP but datafile are not there
Abap dumps are giving these errors as mentioned below
====================================================
The exception must either be prevented, caught within the procedure
"DATA_SELECTION"
"(FORM)", or declared in the procedure's RAISING clause.
To prevent the exception, note the following:
Database error text........: "ORA-01157: cannot identify/lock data file 256 -
see DBWR trace file#ORA-01110: data file 256:
'/oracle/SD1/sapdata4/temp_2/temp.data2'"
Internal call code.........: "[RSQL/FTCH/MARA ]"
===================================================
another one asking for
'/oracle/SD1/sapdata3/temp_1/temp.data1'"
Best Regards
Waqas

if you want to add a new tempfile to your TEMP Tablespace,you can do like that.
ALTER TABLESPACE <name of TEMP Tablespace> ADD TEMPFILE <pfad to the file_and_file name> SIZE <size>;
You can use also the options REUSE autoextend off or on .
e.g:
alter tablespace PSAPTEMP add tempfile '/oracle/SD1/sapdata4/temp_2/temp.data2' SIZE 1000K REUSE;
The directory temp_2 should exist.
Or you can use the BR*Tools to create a new datafile. Enter brtools and follow the instructions or menu.
More to TEMP Tablespaces see please following SAP notes:
659946 - FAQ: Temporary tablespaces
600513 - ORA-25153 after recovery due to missing tempfiles
and the Oracle Note:
160426.1: TEMPORARY Tablespaces : Tempfiles or Datafiles ?
I hope it helps.

How to create IDX files

Hi All,
How to create IDX files, In pdf i have done full text index with catlog, i have got the pdx files.
But i need the index files *.idx files.
How to get these files.
Please help me to solve this issue.
Regards,
Vinoth

i have created the button on Acrobat X professional.
Please find the below code for search the text
// Test search text and only proceed if it’s not empty
var cSearchTxt = this.getField("SearchText").value;
if(!/^\s*$/.test(cSearchTxt))
   // Create first part of path to index file from this file
   var aPath = this.path.split("/");
   aPath.pop();
   var cPathRoot = aPath.join("/");
   // Determine Index to use with search
   var cIdxPath = "";
   var cCatagory = this.getField("Catagory").value;
   switch(cCatagory)
      case "P01":
         cIdxPath = cPathRoot + "/Catalogs/Paper01.pdx";
         break;
      case "P02":
         cIdxPath = cPathRoot + "/Catalogs/Paper02.pdx";
         break;
   // Setup Search Options
   //search.matchCase = this.getField("CaseSensitive").isBoxChecked(0);
   //search.matchWholeWord = this.getField("WholeWord").isBoxChecked(0);
   //search.wordMatching = this.getField("MatchOpts").value;
   // Perform Search
   search.query(cSearchTxt, "Index", cIdxPath);
Regards,
Vinoth

How to create a validation for the project coding mask

Hi,
Would just like to ask how to create a validation for the project coding mask wherein the WBS elements hierarchy will be checked against the template saved. For example,
project coding mask is XXXX-XXXXX-XX-X-X-X-00-X
mother WBS should be XXXX-XXXXX-X and lower level WBS would be XXXX-XXXXX-XX.
The validation should not allow a mother WBS to be XXXX-XXXXX-XX.
How can we go about this?

Hi Jacquiline Bersamin,
You can use validation with the combination of the level and the coding mask.
In the validation:
Pre requisite: WBS level = 1
Validation: Prps-posid = prps-posid :1-12:
Message : Error
If required you can give the parameters for your detail error message.
Please let me know if this does not work.
Thanks
Regards
Srinivasan Desingh

How to create xpi file for my own extension?

I have created my own extension and directly added profile extension folder in my system.its working fine. but while installing extension using .xpi file its produce error "Install script not found
-204".Please explian me how to create .xpi file for my extension folder.
I hope you can help this issues.
Thanks in advance.
Regards
vasanthi

See this:
https://developer.mozilla.org/en/Building_an_Extension

How to create Batch file to execute sql scripts

Hi friends,
      i want to create batch file to execute all my .sql scripts.
I have all table ( all table scripts in single file ) ,Udds ( all udds in single file ) ,Stored procedures( separate file for each SPs ),Functions ( Separate file for each Functions ),Triggers and views scripts in .SQL file.
can anybody tell me how to create batch file for executing all these scripts in sql server ?.
   while executing, it should ask Database name,server name, password. if these details are given then it should execute my all scripts in given database
, if any error thrown then that error and procedure name alone have to move to separate log file..
Please help me if this possible or any other easy way to do this..
Thanks - Ravi

Hi Mate.
can i save the below details in my batch file parmantly, so that i don't need to provide the details agains again in CMD while i execute this. Please help
set /p SName=Server Name :
set /p UName=User Name :
set /p Pwd=Password :
set /p DbName=Database Name
If i am providing the details before execution of this bat file it will throw error.

How to create midlet file in j2se project ?

Similar Messages

Maybe you are looking for