How to create more than one VIP use the same IP address and different port(e.g. 80 and 443)

Hi,
I use SCVMM LB Provider deploy network. I want to create 2 VIP use the same virtual IP but use the different port.
for example:   VIP address 1.1.1.123   use port 80 for HTTP   and port 443 for HTTPS
However,
the following problems encountered, when I create the second VIP.
PS C:\Windows\system32> New-SCLoadBalancerVIP -Name "vip11" -LoadBalancer $LB -IPAddress "1.1.1.123" -LoadBalancerVIPTemplate $VIPTemplate1 -LoadBalancerProtocol $Protocol1 -LoadBalancerHealthMonitor $HM1
New-SCLoadBalancerVIP : A virtual IP (VIP) address with the specified name (vip11) or
address (1.1.1.123) already exists on the load balancer (xxx). (Error ID: 13691)
Specify a different name or IP address and try again.
To restart the job, run the following command:
PS> Restart-Job -Job (Get-VMMServer localhost | Get-Job | where { $_.ID -eq
"{b41a77eb-ae0b-490a-8948-662a529b1d8c}"})
At line:1 char:1
+ New-SCLoadBalancerVIP -Name "vip11" -LoadBalancer $LB -IPAddress "1.1.1.123" -Lo ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo          : ReadError: (:) [New-SCLoadBalancerVIP], CarmineException
    + FullyQualifiedErrorId : 13691,Microsoft.SystemCenter.VirtualMachineManager.Cmdlets.Ne
   wSCLoadBalancerVIPCmdlet
PS C:\Windows\system32>
any suggestions ?
Thank you in advance !

I really don't know DDE very well. It is usually recommended that you switch to using ActiveX. You may not be correctly configuring the netDDE server. There is an example in the reource library that shows how to do this. You may also want to look at the DDE advise examples that came with LabVIEW 5.1 and earlier.

Similar Messages

  • Can i create more than one library on the same computer?

    Can I create more than one library on the same computer?  Just got an ipod for my wife but didn't want her to have to use my library to sync to, so I thought I created another library for her.  When I deleted my albums from her library the disappeared from mine. (I think?)

    pajagsfan wrote:
    Can I create more than one library on the same computer?  Just got an ipod for my wife but didn't want her to have to use my library to sync to, so I thought I created another library for her.  When I deleted my albums from her library the disappeared from mine. (I think?)
    I know it's Valentine's Day, but before you get your wife fixed up the first thing you need to do is recover the deleted albums for your own library.  See if the files are elsewhere on your hard drive, or in the Recycle Bin.  When you find them, get them back into your own library.  Now you are ready to help your wife.
    As noted above, you can have two libraries in one Windows user account via the Shift-Start approach, but if you both use your libraries regularly, that becomes annoying quickly.  It is better to set her up with her own Windows user account. She can have her own iTunes library there.
    Get a copy of your entire iTunes folder to start her off.  She can delete stuff she doesn't want without messing you up.

  • Does it make sense to create more than one repository of the same type?

    Hi guys!
    Does it make sense to create more than one repository of the same type? Let's say 2 CM repositories?
    Thanx for answer!
    Peter

    Hi Peter,
    yes, that makes sense. If you want to use different combinations of repository services you need different repositories. Or if you want to include existing data (e.g. file systems) from different locations. Or if you need to use different backup strategies (RDBMS, file), or ...
    BTW, my KM Installation (NW04 SPS9) has <b>23</b> CM repositories by default.
    HTH,
    Carsten
    Message was edited by:
            Carsten Buechert

  • Is it possible to install Lightroom 4.1 on more than one computer using the same product code?

    is it possible to install Lightroom 4.1 on more than one computer using the same product code?

    Yes, your license key is cross platform PC & or Mac you are allowed to have two current installations with one in use at any point in time. You can uninstall / install as many times as is necessary so long as you adhere to the limits.

  • How to display more than one data on the same page?

    Hello all,
    I have a question that is if I want to choose more one data on the same page and the data is selected from the same column.
    I.E I want to tick more than one boxes in the page but the data is selected from the same column.

    Select all the item to burn... right click...
    Or
    Place all items into a folder and burn the folder to the disc.
    Or
    Make a Burn Folder in the Finder (place items into the folder) and burn from there to a disc.

  • How to burn more than one file on the same dvd?

    I would like to burn more than one file in to the same dvd. It seems to me that using Finder I can burn only a file. There is some alternative command? Thank's

    Select all the item to burn... right click...
    Or
    Place all items into a folder and burn the folder to the disc.
    Or
    Make a Burn Folder in the Finder (place items into the folder) and burn from there to a disc.

  • How to pixalet more than one person on the same piece of footage?

    Trying to pixalet more than one person in a piece of video footage with Final Cut Pro X. Having problems trying to do more than one person.

    rebelrider1 wrote:
    Trying to pixalet more than one person…
    you can apply the Censor Effect, as most other effects, more than once:

  • SAPCL Having more than one DB2 use the same trace directory.

    Hello,
    Looking at the DBACOCKPIT SAP Collector settings panel, we have all of the DB2 subsystems that run in a given LPAR use the same trace directory.  (HFS path of trace directory.)
    In our case, that directory is /usr/sap/saposcol/traces.  This means that we have trace files called db2cl* from all of our alert routers running on an LPAR in the same directory.  It is a little confusing, but we can handle it.  The question I have is that there is a cmds.alr file in that same directory.  The contents of that file seem to change occasionally.  At times throughout the day, the file seems to be contain information related to the five alert routers using that trace directory.  Is it OK for the contents of this file to change?
    Another question I have is related to the sapcl file that is in this directory.  The timestamp on this file seems to change periodically.  Sometimes the file size changes.  Note 958252, the SAPCL FAQ says "The trace directory is required to save errors or trace files and to start the alert router. To start the alert router, the system loads the executable SAPCL from the database, saves it temporarily in the trace directory and starts it in USS."
    With 5 alert routers, sharing the same trace directory, you could end up with 5 sapcl executables that get changed around based on what a particular alert router needs.
    Would it be better to point each alert router to a different trace directory?
    Thanks,
    Ron Foster

    Hello,
    There are two configuration parameters in transaction DBACOCKPIT -> u201CSAP Collector Settingsu201D to determine the SAPCL directories.
    HFS path of collector:
    This is the directory, where the files u201CDBRM.db2cldbu201D and u201Csapdb2clu201D are located. The two files are used during installation of SAPCL and u201Ccopiedu201D into two targets:
    A) Linked into DB2 Load library to be used as the stored procedure SAPCL.
    B) Stored into a database table to be used as Alert Router.
    This directory is accessed during installation only. Not during runtime.
    HFS path of trace directory:
    This is the directory, where trace files are stored of the stored procedure SAPCL and the Alert Router. In addition, this is used during startup of the Alert Router. Startup of the Alert Router is done by the following steps:
    1. Unload the Alert Router executable out of the database table into the file u201Csapclu201D.
    2. Creating the Alert Router parameter file u201Ccmds.alru201D. E.g. it contains the SSID.
    3. The executable sapcl is started and the name of the Alert Router parameter file is used as the input parameter of sapcl to determine the behavior. E g.  /u/sapr3/s12run/trace/sapcl /u/sapr3/s12run/trace/cmds.alr
    To keep the input parameters files separate for each SSID, it is recommended to have a trace directory for each SSID. It is also recommended to have a trace directory for each DB2 member of a data sharing group. However, this is just a recommendation. Every time, an Alert Router is stared, the files u201Csapclu201D and u201Ccmds.alru201D are recreated and overwrite the existing files. After startup of the Alert Router, the two files are no more used.
    In the case, where you are using different patch levels or versions of SAPCL and you are using the same trace directory for all SSIDs, it is very likely, that you see different sizes of the file u201Csapclu201D. This is because different patch levels or versions of SAPCL have different sizes and you always see the file size of the most recent stared Alert Router.
    In case, that two Alert Routers are stared at the exactly same time, it could end up in problems.
    Here is an example of the contents of cmds.alr of a two way data sharing group with the SSIDs SGC1 and SGC2 with a shred directory /u/sapr3/jotrun:
    ssid=SGC1 sqlid=SAPJOT planname=CSAPCL FKTID=13 ACE=0 DBTRACE=0 TRACE=0 TRCDIR=/u/sapr3/jotrun/traceSGC1 GUID=4D0685A211780174E10080000A11C971
    ssid=SGC2 sqlid=SAPJOT planname=CSAPCL FKTID=13 ACE=0 DBTRACE=0 TRACE=0 TRCDIR=/u/sapr3/jotrun/traceSCG2 GUID=4D0685C411780174E10080000A11C971
    You can see, that almost all parameters are the same, except u201Cssidu201D and u201CTRCDIRu201D. TRCDIR come from the SAP Collector Settings parameter u201CHFS path of trace directoryu201D. Please note that there is not slash between u201Ctraceu201D and u201CSGCu201D. The directory name is u201CtraceSGC1u201D and u201CtraceSGC2u201D.
    Regards
        Dirk
    Dirk Nakott, IBM, DBACOCKPIT development

  • Can more than one MAC use the same time capsule??

    My husband and I both have 27" imacs.  Since he just had a hard drive failure, I'm worried about my machine, and we'd both like to start backing our computers up.  Can we both use the same hardware to do this?

    Just make sure you have TC big enough to backup both macs! the final storage will be bigger than the disk space sum of your both macs as there will be incremental backups and snapshots in time going back!
    Otherwise your TM app will scream bloody murder that you are runnign out of space  as mine does :-)

  • Sourcing: Creating more than one PO for the same BID

    Hello,
    We are using the sourcing functionality in SRM 5.0 (classic escenario).
    On the basis of an acepted bid, we generate a Purchase Order in the R/3 Backend system.
    We noticed that in the standard, SRM lets us create for the same position of the bid, another Backend PO, without warning or error.
    We would like to manipulate this escenario in such a way that this PO repitition of the same Bid position is not possible.
    Anyone already found a way around this problem? May be we need to activate an error message?
    Thanks for any reply.
    Aart

    I agree that
    SRM lets us create for the same position of the bid, another Backend PO
    but it does give warning that I have seen.
    would recommed to work with yr ABAP team to see whether you can convert this message to type "Error".
    one more suggestion is for ..... PO_NEW badi
    hope you would have implementation of this exit.
    then you can check whether for current BO BUS2200 whether ECC PO is already created
    if yes
    then do not create again
    BR
    Dinesh

  • How to send more than one command at the same time to write buffer in VISA READ?

    Hi,
    I'm using the LABVIEW->serial.VI with a small modification for my serial communication with a shutter control unit.At present,I can send one command CTSO1 to the write buffer.My instrument can read upto 5 commands.I want to send CTSO1 and CTSO2 simulatenouly so that i could open two shutters simulatenously.Note that commands have carraige return constants as terminatting characters.I'm enclsoing the VI which works for one command.
    Any help in this regard is greatly appreciated!
    Regards,
    Rajesh
    Attachments:
    VI_SHUTTER_JUNE30.vi ‏50 KB

    You cannot do two different simultaneous VISA writes over a serial bus. There is a single rx line on the pc's com port and a single rx line on the instrument. You only hope is if the instrument allows you to chain commands and the reception of the carriage return triggers the instrument to implement both at the same time. Maybe you can send CTS01 and CTS02 separated by a space or comma. The manual should tell you if that's possible or maybe you need to ask the manufacturer.

  • How to prevent more than one login for the same username

    I am trying to create a centralized login/logout for my J2EE application, i.e application level security in order to keep track of the users that login and logout to/from application. I need that in order to know which users have logged out before their sessions expire. Is there an easier way (possibly on the server level) to accomplish this.

    How is your centralized authentication service hooked up, through a custom realm?
    Unfortunately there is no notification mechanism of logout events currently. Partly due to the fact that while the a logout is sometimes explicit (session invalidated or expired) it is also at times implicit (if there is no session, the logged in user silently disappears at the end of a request).
    P.S. If you're only looking to keep track of login and access events (and not modify the behavior), the audit logging provides this information directly.

  • Can more than one CHM use the same resources?

    OK, here's the challenge:
    I have a large RoboHTML project with 433 small video clips
    (swf flash files). This project is translated into 10 other
    languages. What I would like to be able to do is to have the
    translated .chm files share the video clips instead of distributing
    11 copies (433 x 11 = 4763 files). Is there any way that anyone
    knows that all of the files can access one set of video clips, and
    display, and play them?

    Hi Margaret
    I suppose exactly how you might accomplish this would largely
    depend on exactly how you are managing to insert the .SWF content.
    Just in case it will help, I'll outline something I tried.
    Within an existing RoboHelp HTML project, I added a new page.
    I then inserted a .SWF onto the page by clicking Insert >
    Multimedia... > Browsing for the desired .SWF, clicking Open and
    finally OK.
    At this point, the .SWF has been inserted into the topic.
    Unfortunately, this process ALSO copied the .SWF to the project
    location.
    So I now visit TrueCode for the topic, and amend the .SWF
    filename reference to include an absolute path to the .SWF.
    I save the TrueCode.
    I then visit the folder where the project is and delete the
    .SWF. This step prevents it from being included in the resulting
    .CHM once it has been compiled.
    I then compiled and tested. The .SWF loads right up into the
    topic!
    Will this help? Rick

  • More than one library (on the same computer) open?

    In the new iTunes 9 it is possible to access several libraries on my home network from the open iTunes window, which is really cool. I wondered if this means it may now be possible to have access to several libraries on the same computer (or connected drives) at the same time. I use 3 different libraries on my work PC and my mac at home and the process of shutting down iTunes, holding down shift/option, reopening itunes, selecting library is rather cumbersome. Having each of the libraries accessible the same way they are for other libraries on the network would be really useful.
    Is it possible?

    pajagsfan wrote:
    Can I create more than one library on the same computer?  Just got an ipod for my wife but didn't want her to have to use my library to sync to, so I thought I created another library for her.  When I deleted my albums from her library the disappeared from mine. (I think?)
    I know it's Valentine's Day, but before you get your wife fixed up the first thing you need to do is recover the deleted albums for your own library.  See if the files are elsewhere on your hard drive, or in the Recycle Bin.  When you find them, get them back into your own library.  Now you are ready to help your wife.
    As noted above, you can have two libraries in one Windows user account via the Shift-Start approach, but if you both use your libraries regularly, that becomes annoying quickly.  It is better to set her up with her own Windows user account. She can have her own iTunes library there.
    Get a copy of your entire iTunes folder to start her off.  She can delete stuff she doesn't want without messing you up.

  • How to backup more than one database using powershell

    I am Trying to backup more than one database using the following script but no luck. I want user to type on command line the database they want to backup, e.g all databases that have "test" at the front like test.inventory, test.sales so i want
    user to type test.* and it backs up all databases related to test. Here is the script
        #$date = Get-Date -Format yyyyMMddHHmmss
        #$dbname = 'test.inventory'
        $dbToBackup = "test.inventory"
        cls
        [System.Reflection.Assembly]::LoadWithPartialName("Microsoft.SqlServer.SMO") | Out-Null
        [System.Reflection.Assembly]::LoadWithPartialName("Microsoft.SqlServer.SmoExtended") | 
        Out-Null
        [System.Reflection.Assembly]::LoadWithPartialName("Microsoft.SqlServer.ConnectionInfo") 
        | Out-Null
        [System.Reflection.Assembly]::LoadWithPartialName("Microsoft.SqlServer.SmoEnum") | Out-
        Null
        Add-Type -AssemblyName "Microsoft.SqlServer.Smo, Version=10.0.0.0, Culture=neutral,   
        PublicKeyToken=89845dcd8080cc91"
        $server = New-Object Microsoft.SqlServer.Management.Smo.Server($env:ComputerName) 
        $server.Properties["BackupDirectory"].Value = "C:\_DBbackups"
        $server.Alter()
        $backupDirectory = $server.Settings.BackupDirectory
        #display default backup directory
        "Default Backup Directory: " + $backupDirectory
        $db = $server.Databases[$dbToBackup]
        $dbName = $db.Name
        $timestamp = Get-Date -format yyyyMMddHHmmss
        $smoBackup = New-Object ("Microsoft.SqlServer.Management.Smo.Backup")
        #BackupActionType specifies the type of backup.
        #Options are Database, Files, Log
        #This belongs in Microsoft.SqlServer.SmoExtended assembly
        $smoBackup.Action = "Database"
        $smoBackup.BackupSetDescription = "Full Backup of " + $dbName
        $smoBackup.BackupSetName = $dbName + " Backup"
        $smoBackup.Database = $dbName
        $smoBackup.MediaDescription = "Disk"
        $smoBackup.Devices.AddDevice($backupDirectory + "\" + $dbName + "_" + $timestamp +   
        ".bak", "File")
        $smoBackup.SqlBackup($server)
        #let's confirm, let's list list all backup files
        $directory = Get-ChildItem $backupDirectory
        $backupFilesList = $directory | where {$_.extension -eq ".bak"}
        $backupFilesList | Format-Table Name, LastWriteTime

    Or i am using this script which backs up everything except tempdb but dont know how to modify this so that it backs up up all test related databases
    Is there a way that i use test.*
    [System.Reflection.Assembly]::LoadWithPartialName("Microsoft.SqlServer.SMO") | out-null
    $s = new-object ("Microsoft.SqlServer.Management.Smo.Server") $instance
    $bkdir = "C:\_DBbackups" #We define the folder path as a variable 
    $dbs = $s.Databases
    foreach ($db in $dbs) 
         if($db.Name -ne "tempdb") #We don't want to backup the tempdb database 
         $dbname = $db.Name
         $dt = get-date -format yyyyMMddHHmm #We use this to create a file name based on the timestamp
         $dbBackup = new-object ("Microsoft.SqlServer.Management.Smo.Backup")
         $dbBackup.Action = "Database"
         $dbBackup.Database = $dbname
         $dbBackup.Devices.AddDevice($bkdir + "\" + $dbname + "_db_" + $dt + ".bak", "File")
         $dbBackup.SqlBackup($s)

Maybe you are looking for