How to create Mp3 CD's in Tiger with itunes

I am converting a huge CD set (48) to Mp3 CD's to save space and more easily be able to play them in my car, which has a Mp3 CD player.
The way I am presently doing it is this way.
1. Import CD (which converts the CD to Mp3 files using the highest quality setting for the best quality).
2. Drag and drop Mp3's to blank CD
4. Rename the tracks 01song, 02 song to get a good play order
3. Right click the Cd in the finder and click burn
This way gets the job done, but is there a easier way? It will take some time to burn all these CD's so I'd like a faster way if possible. Thank you!
John

Reading this article may make burning MP3 CDs in iTunes a little bit easier.
Set 'Disc Format:' in Preferences>Advanced>Burning to MP3 CD.
M
17' iMac fp 800 MHz 768 MB RAM   Mac OS X (10.3.9)   Several ext. HD (backup and data)

Similar Messages

  • I'd like to know how can i connect my old iMac tiger with new one iMac lion. I wanna use the old one for external disk to collect files from there to new one.

    I'd like to know how can i connect my old iMac tiger with new one iMac lion. I wanna use the old one for external disk to collect files from there to new one.

    Hi mshields1162,
    Great question, and welcome to Apple Support Communities.
    First, you may want to choose to have the sidebar displayed for familiarity:
    iTunes 11: Frequently used features
    http://support.apple.com/kb/HT5649
    Afterwards, your device should be displayed if connected:
    We'll want to click on it, and choose the Music tab at the top. Let's make sure "Sync Music" is checked:
    Afterwards, you'll have the option to sync either the entire music library (for your first iPod), or "Selected playlists, artists, albums, and genres" (for the secondary device). Upon selecting this option, four larger option boxes will appear allowing you to pick and choose what content will be synced. For audiobooks, you may need to do the above in the "Books" section. For a visual instruction on how to do this, see the following:
    iTunes 10: Sync to your iPod
    http://support.apple.com/kb/VI72
    Thanks,
    Matt M.

  • How to create a record for table PLAF with order type 'NB'.

    How to create a record for table PLAF with order type 'NB'(standard purchase order).
    who can tell me the T-code or some usefull information?
    Thanks.

    Hi
    This will be updated automatically when generate planned orders thru MRP. (MD02)
    regards
    Srinivas

  • Don't know how to input mp3 to my iphone after updated itunes

    don't know how to input mp3 to my iphone after updated itunes, the left panel is missing now. also some of the mp3 do not file under the same folder with same artist name, don't know how to use the filing system now. pls help. thanks.

    Media is synced the same way in the current version that it was synced in every previous version of iTunes.
    Select the device.
    Select the content desired to be synced.
    Sync.
    To enable the side bar type Cntrl + S

  • How to create a index on a column with type clob

    how to create a index on a column with type clob

    You should have a look to Oracle Text to check if Oracle Text indexing features can meet your needs:
    http://download.oracle.com/docs/cd/E11882_01/server.112/e16508/cncptdev.htm#CNCPT1537

  • How to create sql query for item master with operator LIKE with variables?

    hi all,
    How to create sql query for item master with
    operator LIKE(Contains,Start With,End With) with variables using query generator in SAP B1 ?
    Jeyakanthan

    Hi Jeyakanthan,
    here is an example (put the like statement into the where field)
    SELECT T0.CardCode, T0.CardName FROM OITM T0 WHERE T0.CardName Like '%%test%%'
    The %% sign is a wildcard. If you need start with write 'test%%' and otherwise ends with '%%test'. For contains you need '%%test%%'. You also could combinate this statements like 'test%%abc%%'. This means starts with test and contains abc.
    Regards Steffen

  • Can anyone please guide me how to create a table like employe table with 10

    Hi,
    can anyone please guide me how to create a table like employe table with 10colums.
    after that we need to update the colums with personal details......like name1,name2,address,city,zip...etc.
    using the RFC we need to update the personal details coulums (either select query or Insert command)
    if you have any program logic similar to this requirement please share with me...that would br greatly helpfull to me...
    thanks in advance
    srinivas

    Hi....
    We are having one table and now i am going to update that table's fields...
    for that in RFC function module we need to enter the fields in importing parameters (which are mandtory in table)
    and in source code just write like following....
    ( try to under stand that it contains some previous used table nad field and stucture and work area and function module names)
    FUNCTION ZL2C_UPDATE_MYCUSTOMER.
    ""Local Interface:
    *"  IMPORTING
    *"     VALUE(USR_ID) TYPE  USRID
    *"     VALUE(LOGO_ID) TYPE  KUNNR
      DATA ls_mycust TYPE zl2cmy_customer.
      DATA: name1 TYPE name1_gp.
      DATA: sharpoint_url TYPE url.
      ls_mycust-usr_id        = usr_id.
      ls_mycust-logo_id       = logo_id.
      SELECT SINGLE name1 FROM kna1 INTO name1 WHERE kunnr = logo_id.
        ls_mycust-name1       = name1.
        SELECT SINGLE sharpoint_url FROM zl2c_CUSDASHBRD INTO sharpoint_url WHERE logo_id = logo_id.
          ls_mycust-sharpoint_url = sharpoint_url.
          INSERT into zl2cmy_customer values ls_mycust.
          COMMIT WORK.
        ENDFUNCTION.

  • How do i set up my apple id with itunes and the appstore?

    How do i set up my apple id with itunes and the appstore?

    iTunes 10 for Mac: Set up an Apple ID account for use in the iTunes Store
    http://support.apple.com/kb/PH1726

  • How do I make my iPod classic work with iTunes 9.1

              How do I make my iPod classic work with iTunes 9.1?

    You are correct in some of your assertions, Limnos but, if I were to follow Apple's wishes, I would have to purchase the latest and greatest Apple product every month!  I refuse to do that.  I understand that my G4 is old but, it does what I need it to do.  To answer your question though, I purchased the iPod classic as a refurbished unit, about 5 years ago and had it replaced three times, since then so, there is no way for me to know how old it is.
    From my knowledge of how the Classics work(which is extensive.)  It is basically a hard disk.  There should be of performing a low level format, plug it back in and the G4 should recognize the ROm and automatically search for the correct software associated with that version of iPod and load it but, Apple will most likely no longer carry the software on their servers anymore!(surprise,surprise.)

  • How can I get my ipod to work with itunes?

    When I connect my ipod classic into my new computer it seems that itunes does not recognize it. How can I get my ipod to work with itunes? I'm afraid to disconnect my ipod because the display is saying Do Not Disconnect.

    1. Update iTunes to the latest version. Plug in your iPod. If iTunes still can't recognize it, then in iTunes in the top left corner click help> run diagnostics. On the box that comes up, check the last two things. Click next and it should identify your iPod.
    2. Click on your windows start menu. Type in "services". Click on it and when it pops up, on the bottom of it click on "standard". Now Scroll down to find "Apple Mobile Device" Right click it when you see it and click on "Start". When it has started, close iTunes and replug in your iPod and it should show up.
    3. Check the USB cable
    4 Verify that Apple Mobile Device Support is installed
    5. Restart the Apple Mobile Device Service and verify that the Apple Mobile Device USB Driver is installed.
    6. If you just want to add some photos, songs and movies from computer to your devices, you can use an iTunes alternative to do the job
    7. Check for third-party software conflicts.
    <Link Edited By Host>

  • How do I re-pair the white Remote with iTunes and/or AppleTV 1

    how do I re-pair the white Remote with iTunes and/or AppleTV 1...?
    iMac 8,1 - OSX10.6.8

    Note that our test system may show more or different columns than yours, but what you see in this screenshot is our iTunes 11 music library in "Songs" view, sorted by artist. The major difference from prior versions of iTunes is the lack of the sidebar that gave you quick access to all of your content.
    Don't worry, it's still available! We just have to turn it on. To do so, go to the View menu and choose "Show Sidebar," as shown in the image below:
    http://www.macobserver.com/tmo/article/how-to-restore-the-sidebar-in-itunes-11
    I saw this on their web site... Hope it helps.
    WEU

  • How do we connect Disney anywhere movie app with iTunes account

    How do we connect Disney anywhere movie app with iTunes account

    holy freaking cow for those of you who do this and all it does is take you to the i tunes download page make sure you are using THE LATEST VERSION OF GOOGLE CHROME  i seriously spent two freeking hours trying to figure this out and that was all i had to do !!!! to do this go to google type in google chrome download and just re download it and then go back to DMA and retry connecting your accounts and it should work from there !!!!!!

  • How to create a view object and attach with extended AM

    Hi,
    I tried to create new vo and attach this vo with the extended AM. But it is throwing error like 'PC.NAME : invalid identifier' (Actually this PC.NAME is exiting one).
    Now i want to know how to create a view object similar like seeded one but with one additional condition in the where clause.
    It is possible though extension, but i want to create two view object similar like seeded one, one with some other condition in the where clause
    and another one with some other condition.
    So for my requirement, i'll extend one VO and i'll add my condition but how to do it for second condition.
    But i want same seeded VO with two different condition.
    Any suggestions please,
    SAN

    SAN,
    There is no need to attach the newly created VO with extended AM. You need to attach the same with the standard AM.
    Regards,
    Gyan

  • How to create schema for Header and Footer with pipe delimiter file BPEL11g

    Hi all,
    I have issule creating Schema for Header and Footer with body file .The file format is Pipe delimiter.The following format below like is...
    Softeware Components:File Adapter(Read) 11g,
    1|1211|000|577|5444
    1|0000|57|6988|4554|sfdgh|5448|3333|ituu|44445|55546|544|788|7788
    1|0000|57|6988|4554|sfdgh|5448|3333|ituu|44445|55546|544|788|7788
    1|0000|57|6988|4554|sfdgh|5448|3333|ituu|44445|55546|544|788|7788
    1|0000|57|6988|4554|sfdgh|5448|3333|ituu|44445|55546|544|788|7788
    1|0000|57|6988|4554|sfdgh|5448|3333|ituu|44445|55546|544|788|7788
    1|0000|57|6988|4554|sfdgh|5448|3333|ituu|44445|55546|544|788|7788
    1|4544|000|yted
    I hope get the sollution for this from this Forum..Please help me out..Thankyou.

    You mean how many rows or columns..?
    If coloumns means 5 and rows only one(1).

  • How to create a shortcut for desktop as with IE?

    I've switched my browser to "Firefox" from 'Internet Explorer and would like to know how to create a shortcut for my desktop.

    You can drag the favicon on the left end of the location bar onto the desktop to create a shortcut.
    You can also use an extension.
    * SaveLink: https://addons.mozilla.org/en-US/firefox/addon/savelink/
    * Deskcut: https://addons.mozilla.org/en-US/firefox/addon/deskcut/

Maybe you are looking for