How to create msi with transform for zfdagent

As technicians in our organisation we are given the zfdagent.msi to
install, each time we have to laboriously enter all the required
organisation specific installation parameters........in short how can we
create a transform/answer file package to make life easier :-)

thanks for the reply, I had looked at that but as us mere technicians have
no access to server-side info it was kinda confusing etc, I have however
downloaded an evaluation copy of a software package that did this no
problem :-), I knew that with MS Office etc creating transform files etc
was relatively trivial and that surely this should be not a huge hassle
with the agent. Many thanks for your reply , Ian

Similar Messages

How to create a transaction code for a function group with screen 100 as st

Hello ,
I have requirement where I need to create a function group and create screen 100, 200, 300 and include the function in the screens.
Customer asked me to create a transaction with the screen 100 as the starting screen.
Can you please let me know how to create a transaction code for a function group with screen 100 as starting screen.
[ It is not a module pool program ].
Thanks
Prashanth.
Moderator message - Please ask a specific question and do not ask the forum to do your work for you - post locked
Edited by: Rob Burbank on Jun 2, 2009 11:49 AM

Go to transaction SE93, enter a transaction code that you want and click on "create". Enter a text and select the "Transaction with Parameters" button. In the Default Values section, enter START_REPORT in the transaction field. Check the "skip initial screen" box. In the Name of Screen field section enter the following lines:
Name of screen field:                               Value
D_SREPOVARI-REPORTTYPE                RW
D_SREPOVARI-REPORT                        ZPCA
Save and transport accordingly.

How to create a RFC destination for extracting data to HANA

Hello All,
Could someone help me in providing a document or note on how to create a RFC destination for extracting data from SAP data source to HANA using SAP LT replication server ?
I am able to create a data base connection while transforming data from non SAP data source,but wasnt able to transform data which is from SAP abap tables .

Hi Venkatesh,
In SM59 t.code we create RFC destinations.
Go thru the video link for creating RFC destinations step by step
How to setup a trusted RFC connection between SAP systems: a step-by-step guide - YouTube

How to create a daily report for sales order

hi
how to create a daily report for sales order. what fields it must consists of. what are the tables it need?

Hi
You have to use the sales order tables VBAK,VBAP and VBEP
So keep date field on selection screen
and treat this date as Order creation data audat field in VBAK.
based on this fetch the data from VBAK and VBAP with the following fields like
VBELN, KUNNR,NETWR,POSNR, MATNR,ARKTX,KWMENG,WAERS etc and display in the report
<b>Reward points for useful Answers</b>
Regards
Anji

How to create an address code for PO delivery address?

Hi Guys,
How to create an address code for the delivery address in the purchase order? Please explain me with details.....
Thanks
Raja

delivery adress records can be created with transaction MEAN.
the number is purely internal.
In ME21N you can then search by name (you will certainly not know the number)

How to create a custom measure for each level of a dimension

Hi all!
Can Anyone please explain me with an example, how to create a custom measure for each level for a dimension? I dont mine if you use
one or more measures.
thanks in advance
hope someone helps me.

For example:I create a dimension for product_dim witch has 4 levels:total, class, family and item:
d_aben18
n1_aben18
n2_aben18
n3_aben18
n4_aben18
herarchy:h_aben18
cube:cubo_aben18
measure:med_aben18
I create this code to fetch the data to the dimension:
TRAP ON CLEANUP
SQL DECLARE c1 CURSOR FOR SELECT-
total_product_id,1,'N1_ABEN18',total_product_dsc,-
class_id,1,'N2_ABEN18',total_product_id,class_dsc,-
family_id,1,'N3_ABEN18', class_id, family_dsc,-
item_id,1,'N4_ABEN18',family_id,item_dsc-
FROM PRODUCT_DIM
"OPEN THE CURSOR
SQL OPEN c1
"FETCH THE DATA
SQL FETCH c1 LOOP INTO-
:APPEND D_ABEN18, :D_ABEN18_H_aben18_HIERDEF,:D_ABEN18_N1_aben18_LEVELDEF,:D_ABEN18_long_description,-
:APPEND D_ABEN18, :D_ABEN18_H_aben18_HIERDEF,:D_ABEN18_N2_aben18_LEVELDEF,:D_ABEN18_parentrel,-
:D_ABEN18_long_description,-
:APPEND D_ABEN18, :D_ABEN18_H_aben18_HIERDEF,:D_ABEN18_N3_aben18_LEVELDEF,:D_ABEN18_parentrel,-
:D_ABEN18_long_description,-
:APPEND D_ABEN18, :D_ABEN18_H_aben18_HIERDEF,:D_ABEN18_N4_aben18_LEVELDEF,:D_ABEN18_parentrel,-
:D_ABEN18_long_description,-
"SAVE THE CHANGES
UPDATE
COMMIT
CLEANUP:
SQL CLOSE c1
SHOW 'KK2'
Then I create a cube with use compression off, and in rules sum for example.
After, I create a measure and I select Override the aggregation specification for the cube, in rules I put nonadditive and I would like to create aprogram to assign distinct values to each level of the dimension. For example, I put 1, 2 3, and 4 values, but at the end I would like to put count(distinct(values)).
for that I create another program:
VRB D_RETURN DECIMAL
if D_ABEN18_N1_ABEN18_LEVELDEF eq 'N1_ABEN18'
then D_RETURN = 1
if D_ABEN18_N2_ABEN18_LEVELDEF eq 'N2_ABEN18'
then D_RETURN = 2
if D_ABEN18_N3_ABEN18_LEVELDEF eq 'N3_ABEN18'
then D_RETURN = 3
if D_ABEN18_N4_ABEN18_LEVELDEF eq 'N4_ABEN18'
then D_RETURN = 4
else d_return=26
return d_return
"SHOW D_RETURN
cubo_aben18_med_aben18_stored=d_return
but it doesnt work.I dont know how to put to assign or to see what I want.
I report the measure, or I report the program, but then how can I see the values of the measure?
thanks in advance

How to create a account key for application type M ?

Hi Guys,
How to create a account key for application type M ? and link the same with
Gl account.
thanks.

Hi
Please create the account keys or transaction keys in
SPRO-> IMG-> MM-> Purchasing-> Conditions-> Define Price Determination Process-> Define Transaction/Event Keys
Thanks & Regards
Kishore

How to create an apple id for your child

how to create an apple id for your child

You can create an id without accredit card that might be what you want. Ten use that ID for your child's iMessage and iCloud and use your ID for iTunes and App Store on both phones. That way you can control what is purchased. I would set up restrictions on the kid's phone with a pun that you only know and durn off in app purchases

How to create a new field for Q3 - QM notification in Header and item level

Dear All,
l
Sub: How to create a new field for Q3 - QM notification in Header and item level
Ref. the link --> Quality Notification
We want to create a new field in header level and item level.
As per the thread the solution is given below.
In the IMG Config: Quality Management -> Quality Notification -> Notification Types -> Define screen areas for notification types Then Choose 'Define screen areas' Then Click on 'New entries' button Now, select the relevant Notification Type and click in 'Enter'. Select the 'Iten Cases' register and remember to setup the Tabstrip Header, Icon, etc. Set the 'Tabstrip active' flag. Then Save.
Quality Notification -> Notification Types -> Define screen areas for notification types
WE ARE UNABLE TO FIND IN CUSTOMIZATION PATH --> DEFINE SCREEN AREAS FOR NOTIFICATION TYPES.
Please help.
Question No. 2 :
THE REQUIREMENT IS GIVEN BELOW.
We want to hide the field in Q3 - QM Notification
In header --> Reference tab --> Item (sub heading) --> "DEFECT LOCATION" FIELD TO BE ELIMINATED (HIDE)
Ref the link --> Quality notification
The solutiion is given below.
Hi Sami,
We can hide the collumns using the Transaction OQM1 and Program Name SAPLIQS0.
Lets say Defect location need to be hidden, the field TXTCDOT need to have the radio button HIDE.
Hope this will suffice your requirement.
Kindly ask me if you need any other details.
Thanks & Regards,
Srinivas.D
Hi Sami,
We can hide the collumns using the Transaction OQM1 and Program Name SAPLIQS0.
Lets say Defect location need to be hidden, the field TXTCDOT need to have the radio button HIDE.
Hope this will suffice your requirement.
Kindly ask me if you need any other details.
Thanks & Regards,
Srinivas.D
By double clicking the "DEFECTIVE QUANTITY (EXTERNAL), WE COULD NOT GET --> field TXTCDOT .
Plese do the needful.
We are using ECC6.0 Ehp3 and Ehp4.
With Best Regards,
Raghu Sharma

Dear Pushpa,
Transaction Code :SHD0 is working fine.
Please accept my sincere thanks for your sharing your Knowledge.
I am able to fulfill my
Regarding the enhancement, I have not tried.
Once I will complete, I will award the fulll marks to you.
With Best Regards,
Raghu Sharma

How to create a help view for a customized error message

Hi all,
Can you guide me how to create a help view for a customized error message, we need to put some suggestions in it so that user can can resolve this issue with this guide. ( the short text is too short to describe all situations via TC:SE91)
Thanks very much!
Bruce, Wen

Hi Bruce,
Could you brief your concerns again.
Why don't you maintain long text in message class for long description.
Regards,
Ranjith N

How to create a new Condition for tax as VAT ( 4 % ) in SAP ? .

Dear All ,
Pl guide that " How to create a new Condition for tax as VAT ( 4 % ) in SAP ? . What are all necessary requirements to do so , I need to have all steps so that i should feel very confident . For example what data is to be ticked in Control tab during cond. creation , in the same way how to put this cond. in Pricing procedure ? pl write all necessary thing which are required during this process .
Thanx & deep regrads to all in adv.
sap11

In tax we can configure taxprocedure two types i.e., taxinn and tainj. If you adopt taxinn procedure if it is other than VAT condition first you have to create the condition type and then you have to go to FTXP and assign the tax required VAT percentage to the repective % to ded or non ded VAT condion type. In second step you have to assign this tax code to respective company code.
If you adopt taxinj procedure you have to a create tax code with FTXP T-code by assigning the values to the respective and save conditions.
Regards,
Bhuvan

How to create a new row for a VO based on values from another VO?

Hi, experts.
in jdev 11.1.2.3,
How to create a new row for VO1 based on values from another VO2 in the same page?
and in my use case it's preferable to do this from the UI rather than from business logic layer(EO).
Also I have read Frank Nimphius' following blog,but in his example the source VO and the destination VO are the same.
How-to declaratively create new table rows based on existing row content (20-NOV-2008)
http://www.oracle.com/technetwork/developer-tools/adf/learnmore/13-create-with-params-169140.pdf
I have tried:
1.VO1(id,amount,remark1) and VO2(id,amount,remark2) are based on different EO,but render in same page,
2.Drag and drop a Createwithparams button for VO1(id,amount,remark),
3.add: Create insertinside Createwithparams->Nameddata(amount),
4.set NDName:amount, NDValue:#{bindings.VO2.children.Amount}, NDtype:oracle.jbo.domain.Number.
On running,when press button Createwithparams, cannot create a new row for VO1, and get error msg:
<Utils> <buildFacesMessage> ADF: Adding the following JSF error message: For input string: "Amount"
java.lang.NumberFormatException: For input string: "Amount"
at java.lang.NumberFormatException.forInputString(NumberFormatException.java:48)
Can anyone give some suggestions?
Thanks in advance.
bao
Edited by: user6715237 on 2013-4-19 下午9:29

Hi,CM,
I'm really very appreciated for your quick reply! You know, today is Saturday, it's not a day for everyone at work.
My principal requirement is as follows:
1.select/check some rows from VO2, and for each selection create a new row with some attributes from VO2 as default values for VO1's corresponding attributes, and during this process the user may be cancel/uncheck or redo some of the selections.
--so it's better to implement it in UI rather than in EO.
2.it's better to implement this function with declarative way as in Frank Nimphius' blog.
--little Jave/JS coding, the better. I only have experience in ORACLE FORMS, little experience in JAVA/JS.
In order to get full information for the requirements of my use case, can take a check at:
How to set default value for a VO query bind variable in a jspx page?
(the end half of the thread: I have a more realworld requirement similar to the above requirement is:
Manage bank transactions for clients. and give invoices to clients according to their transaction records. One invoice can contain one or many transactions records. and one transaction records can be split into many invoices.
Regards
bao
Edited by: user6715237 on 2013-4-19 下午11:18
JAVE->JAVA

HOw to create a Batch file for java application and whats the use of this ?

HI,
How to create a Batch file for java application ?
And whats the use of creating batch file ?
Thanks in advance

First of all, you're OT.
Second, you can find this everywhere in the net.
If you got a manifest declaring main class (an classpath if needed), just create a file named whatever.bat, within same directory of jar file, containing:
javaw -jar ./WhateverTheNameOfYourJarIs.jar %*By the way, assuming a Windows OS, you can just double click the jar file (no batch is needed).
Otherwise use:
javaw -cp listOfJarsAndDirectoriesSeparedBySemiColon country/company/application/package/className %*Where 'country/company/application/package/' just stands for a package path using '/' as separator instead of '.'
Don't specify the .class extension.
Javaw only works on Windows (you asked for batch, I assumed .BAT, no .sh), in Linux please use java.exe (path may be needed, Windows doesn't need it 'cause java's executables are copied to system32 folder in order to be always available, see PATH environment variable if you don't know what I'm talking about) and use ':' as classpath (cp) separator.
The '%***' tail is there in order to pass all parameters, it only works on Windows, refer to your shell docs for other OSs (something like $* may work).
This way you have a command you can call to launch your code (instead of opening NetBeans just to see your app working). You could schedule tasks on it or just call it in any command prompt (hope you know what it is 'cause there have been people in this very same forum with no clue about it, if not just hold the 'Windows button' and press 'R', then type 'cmd' and run it).
Finally add dukes and give 'hem away.
Bye.

Adobe premiere elements 12 - how to create menu bar action for my inserted image button

adobe premiere elements 12 - how to create menu bar action for my inserted image button without using their movie menu theme

forbemag
I do not think that I am completely focused into this completely, so let us see if the following is going to help.
You are going to need a base for your button. When you mention "image" button, I am assuming that you are using that term to differentiate between a text button and a thumbnail type button.
The menus (main and scene) take their origin in .psd files on the hard drive and strict nomenclature and structure for Layers Palatte. And, the buttons on the menus trace back to the menu markers on the Timeline, main menu marker and order of placement of scene markers. The scene thumbnail will only appear when there is a scene marker on the Timeline to which it.
In view of all that
Where have you already inserted this "image (button)"...into the Layers Palette of a Photoshop document or other? Is this "image (button)" in a structured Layer Group in the Layers Palette with sublayer groups, text layers, graphic/background layer"?
Let me give you an example
If you have a button (with thumbnail) on the main menu and you want that to open to a specific scene in your movie, then you use a main menu marker on the Timeline at the spot that you want that button to target.
If I am getting closer to what you seek, then please further clarify the DVD navigational envisioned scheme.
Thanks.
ATR
Add On...I did not see the exchanges between us and SG until after I had posted mine. I thought that your discussions were concluded. Please excuse the interruption.

How to create complaints with reference to ECC Billing document (CRM 7.0)

Hi experts!
I use ECC 6.0 and CRM 7.0.
I have to create CRM complaints (ZCLR - CLRP) with reference to ecc billing documents.
I read the following topics and help:
1. How to create complaints with referenceto ECC Billing document
2. Re: How can we transfer billing documents from SAP ERP to CRM 2007?
3. http://help.sap.com/saphelp_crm70/helpdata/en/46/029ba32e675c1ae10000000a1553f6/frameset.htm
Made these settings:
1. Define the Business object type
Goto SPRO>CRM>Transaction>Settings for Complaints>Integration>Trnsaction Referencing>Define Object types for Transaction reference
2. Assign Business Object Types to Transaction Types
Goto SPRO>CRM>Transaction>Settings for Complaints>Integration>Trnsaction Referencing>Assign Business Object Types to Transaction Types
3. Implement a BADI - CRM_COPY_BADI_EXTERN.Check Implementation CRM_COPY_BADI_BILLDO for more information on the coding for referencing the ECC Billing document.
Goto SPRO>CRM>Transaction>Settings for Complaints>Integration>Trnsaction Referencing>BAdI: Create Complaint with Reference to External Transaction.
but still do not know,
1) if I should pre-replicate billing documents into CRM ?
2) Or, the system uses the RFC to find these documents in ECC to create reference?
Please help me.
Best regards Kostya.
Edited by: Kostya Khveshchenik on Oct 20, 2010 2:09 PM

not resolved =(
Edited by: Kostya Khveshchenik on Nov 19, 2010 8:50 AM

How to create msi with transform for zfdagent

Similar Messages

Maybe you are looking for