How to create multi axis graph with 2 on change of fields and 2 values

Hi all,
i am working for a Semi conductor company and I have been madated to evaluate Crystal report 2008 in order to include it in our legacy software.
So I have tested the soft and it seems to fit to our need.
But I have a question...
Here is a scenario i want to create in crystal but I have an error message..
Can you please tell me if twant I want to achieve is feasisible...and if so how ?
Thank you
I would like to create a percent bar chart that contains 2 on change of fields and 2 show values.
The idea behind in then to have a mutli axis chart in order to print as a line the second values.
So the first values will be my bar chart in percentage and the second value will be a sum.
Hope my description is cleat...
Thank's in advance for your support...
Have a good day

There are different ways to achieve that. The simplest i could recall is to have 2 different charts, 1st bar chart and 2nd a line chart, lay one over the other and enable the transparency on the chart which on Top ( say Line ). also, crystal will allow you to control axes etc and make them transparent..

Similar Messages

How to update multi-handle graph with a new set of data points

I have multiple sets of data that all have the same number of columns but different numbers of rows. Each column is plotted on a graph. I want to keep the format of the original graph with the same number of handles, and update each handle with new data points by bringing in a new set of points.
See attachment for example.
Attachments:
hiqgraph.HiQ ‏14 KB

There are several ways to do this.
1. You can create a HiQ script that plots the new data to the graph using the existing plots. The following three lines plot the new data into the three existing plots (indicated by the plot handles.) Put these lines into a HiQ script object, right-click and select Run.
addplot(Graph2D_1,-1,data2[*,1],data2[*,2]);
addplot(Graph2D_1,-2,data2[*,1],data2[*,3]);
addplot(Graph2D_1,-3,data2[*,1],data2[*,4]);
2. You can do it interactively by right-clicking on the individual plots and choosing Change... This will being up a dialog you can use to change the data in that plot. This will be difficult to do when plots are right on top of each other, so you may want to display the plot legend, where you can also right-click a
nd select Change...
3. I like your idea about DataSocket. This way it will happen automatically. Whenever the matrix published to DataSocket changes, the plot should automatically update.
I hope this helps.
David

How to create a column graph with colors per set of values

I need to create with Microsoft Excel, a column graph that based on different values, each column will contain different color.
To be precise:
E.g.:
- Green: If it is 0
- Orange: If it is between 0 and 10
- Red: If it is more than 10
I would appreciate to help me how to do this.

Hi EriValidata,
According to your description, I get the result as shown in the following figure.
Is this a correct result? If yes, this is an excel chart with conditional formatting. Please try the following steps to create the chart.
To accomplish this task, you will need to create three additional columns of data and plot those three columns of data-and not the original column of sales data – in a stacked column chart. As shown in the figure.
And the formula in C2 is: =IF(AND(B2>0,B2<=10),B2,0). The formula shows the value in column C if it falls between the limits in rows 0 and 10; otherwise it shows 0. The formula is filled into the range C2:E4.
Then we select the source data with A2:A4 and C1:E4, as shown in the figure to insert a column chart. The chart now shows 3 sets of colored bars, one for each data range of interest.
And I upload a TEST2.xlsx file on OneDrive, you can download this file via this link:
https://microsoft-my.sharepoint.com/personal/v-lzng_microsoft_com/Documents/Shared with Everyone
Hope it’s helpful.
Regards,

Service Interface: How to create an SDO graph with tow Objects

Hi,
I want to create a Web service interface on top of my application module. Using the Service Interface I select the app mod, service methods and view objects from the data model. My data model consists of a master detail relationship. The Web service should provide an interface that uses a master and its details as parameters in an operation.
For example a customer and his credit cards. A GET-Operation should return a data structure that groups all objects.
I do not know how I can configure such a web service.
How can I achieve such a web service?
Do I have to code a service method and what is the return type of the method?
Can I work with existing VOs?
Do I need 'special' preconditions like a composition between master and detail?
Any idea?
Thanks,
Markus

Hi Scott
Bad news. I read several time this thread, but I have not found error in my program ... .
And I can not see what are really doing APIs of APEX.
Time is going - so we have make a decision now.
Probably (as I have no more answers at this forum) - we can not use APEX (as nobody using APEX sessions as I asked),
as we can not manage its sessions programmatically (too risky).
Thanks for your answer.
Andres

I would like to know how i can create a bell graph with out using sub VIs, the data that i created consists in 500 readings with values of 0 to 100, i calculated the mean value and standard diviation. I hope some one can help me

I would like to know how i can create a bell graph with out using sub VIs, the data that i created consists in 500 readings with values of 0 to 100, i calculated the mean value and standard diviation. I hope some one can help me

Here's a quick example I threw together that generates a sort-of-bell-curve shaped data distribution, then performs the binning and plotting.
-Kevin P.
Message Edited by Kevin Price on 12-01-2006 02:42 PM
Attachments:
Binning example.vi ‏51 KB
Binning example.png ‏12 KB

How to create an unsolved cube with awm???

hi all,
I readed the "Oracle Olap developer's guide to the Oalp api" and I found there's 2 type of Cube: Solved and Unsolved Cubes. And this document says: "... if all the data for a cube is specified by the DBA, then the cube is considered to be Solved. If some or all of the aggregate data must be calculated by Oracle OLap, then the cube is unsolved ..."
I tried with awm 10.2.0.3.0A to create an unsolvedCube but I can't. All cubes I created are solvedCube. To know if a cube is solved or unsolved, I wrotte an program in Java to read informations of package mtm.
Some one can tell me how to create an unsolved cube with AWM ou other soft please!

SH is not a relational OLAP data model which is quite different from the GLOBAL schema which is based on an Analytic Workspace.
If you change the aggregation method you will need to re-compute the whole cube which can be a very big job! You might be able to force the unsolved status be de-selecting all the levels on the Rules tab in AWM. However, I think by default analytic workspace OLAP models always provide a fully solved cube to the outside world. This is the nature of the multi-dimensional model.
Relationally, as keys are located in separate columns a cube can be unsolved in that the key column only contains values for a single level from the corresponding dimension tables. If more than keys for different levels within the same dimension appear within the fact key column then the cube is deemed as being solved.
Therefore, I am not sure you are going to get the information you require from the API. To changes the aggregation method you will have to switch off all pre-compute options and also disable the session cache to prevent previously calculated data being returned when you change the aggregation method.
Hope this helps
Keith Laker
Oracle EMEA Consulting
BI Blog: http://oraclebi.blogspot.com/
DM Blog: http://oracledmt.blogspot.com/
BI on Oracle: http://www.oracle.com/bi/
BI on OTN: http://www.oracle.com/technology/products/bi/
BI Samples: http://www.oracle.com/technology/products/bi/samples/

How to create a pie graph in 10g or 9i forms using beans??

Hi..
Please can anyone show me how to use pie graphs in oracle 10g or 9i forms using bean?
i also want to know how to put data in pie graph.. as u know in column graph for example we have an x-axis and y-axis,and in pie there is no x-axis and y-axis.. so how i can put the same data in pie graph.. and also i may need more than one value for the x-axis or the y-axis to use in pie graph so how can i do it??
i use set_custom_property to call properties in beans.
I would so thankful for how can answer me.. please its urgent
Thanks.

there are some other posts to this topic - How to create a pie graph in 10g or 9i forms using beans?? and so on.
use the search function of this forum. this may the fastest way for your urgent question

Hi, I have Adobe Acrobat Professional. I need to know how to create multi-links on 300 page docs

I need to know how to create multi-links on a 300 page document, showing "return to main Menu". Ideally placed on the bottom right of each page. I have adobe acrobat Professional.

Import a picture to be a button, place it, activate HYPERLINK tool, draw a rectangle around the whole button, in the window popping up select the link behaviour, submit with OK.
Then copy & paste the button object to every page. I don't know whether pasting it on every of the 300 pages can be automated, but if not, it is still done quite fastly.

How to create multi garnishment order for the same garnishment document

Hi,
Can anyone tell me how to create multi garnishment order for the same garnishment document. I tried to copy the entry in IT0195 but the sequence field is grayed out so it will just delete the old record. What configuration should I do to make this possible?
Thanks a lot in advance.

hi,
As far as I got it.
You cannot have multiple Garnishment order but if a need arises you have to maintain it in IT216.
For that follow this path goto PA30->pernr->194->change->Garnishment->adjustment.
Since like order you cannot maintain adjustment also directly.
Regards,
Amit
Reward all helpful replies.

How to create an explain plan with rowsource statistics for a complex query that include multiple table joins ?

1. How to create an explain plan with rowsource statistics for a complex query that include multiple table joins ?
When multiple tables are involved , and the actual number of rows returned is more than what the explain plan tells. How can I find out what change is needed in the stat plan ?
2. Does rowsource statistics gives some kind of understanding of Extended stats ?

You can get Row Source Statistics only *after* the SQL has been executed. An Explain Plan midway cannot give you row source statistics.
To get row source statistics either set STATISTICS_LEVEL='ALL' in the session that executes theSQL OR use the Hint "gather_plan_statistics" in the SQL being executed.
Then use dbms_xplan.display_cursor
Hemant K Chitale

How to create a Sales order with ref to Contract using Function Module

How to create a Sales order with ref to Contract using Function Module BAPI_SALESDOCU_CREATEFROMDATA ?

We have a unique situation where we like change the sold-to customer of the sales order
once order has been created. These orders have been created using either by function module
BAPI_SALESDOCUMENT_COPY or using BDC (VA01, Copy with reference).
These two processes work abosolutely fine except someone might have change the sold-to
customer of the ship-to customer of the original sales order. If this the case then the new
sales order will be created with the old sold-to and with not the new sold-to.
We tried using BAPI_SALESDOCUMENT_CHANGE and commit afterwards. We checked
the returned parameteres of the BAPIs and they are all successful but sold-to remains the
same old one.
Any help would be much more appreciated.

How to create a pdf file with CS5

Hello, I'm new to PhotoShop CS5 and haven't figured out yet (despite two hours of trying) how to create a pdf file with pictures and texts. Can someone please help me with this ? The "help" button in CS5 doesn't seem to cover this question. Nor do the FAQs.
Thank you very much.

Save As... Photoshop PDF.

How to create a test plan with specific transactions (or program)

Hello,
I'm a new user in Sol Man !
How to create a test plan with specific transactions (or program).
In my Business Blueprint (SOLAR01) I've created in 'transaction tab' the name of my specific transactions and linked it.
In my test plan (STWB_2) those specific doesn't appear to be selected !
Thanks in advance.
Georges HUYNEN

Hi
In solar01 you have defined but you have to assign the test case in solar02 for this test case in the test cases tab.
When you do so expand the business sceanario node in test plan generation of STWB_2 transaction and now that will appear.
Also visit my weblog
/people/community.user/blog/2006/12/07/organize-and-perform-testing-using-solution-manager
please reward points.

How to create a web template with company logo

how to create a web template with company logo . can any one help me with the steps. or any notes. thnaks in advance .
2. i have 25000 articles and client want to have a selection feild to see top article ex:50,10,20, 100, 1000 etc . same for bottom articles . plz let me know how to do it . thanks for replay . i am new bw so plz .
thanks to you all

Hi
1) Please read
http://help.sap.com/saphelp_nw04/helpdata/en/4a/c8353c51aab32be10000000a114084/frameset.htm
2) Create a condition in the Query Designer: Use a formula variable
See http://help.sap.com/saphelp_nw04/helpdata/en/73/702e39074dc93de10000000a114084/frameset.htm
Heike

How to create a transport request with query and only with its structure.

HI guru,
how to create a transport request with query and only with its structure.transport request should not include any other query items like ( variables, conditions...etc)
thanks in advance.
venkata

Hi,
Goto RSA1 and then Transport Connection -> In SAP Transports select Object Types-> Query Elements -> Then select Query->Give Technical name of the query and then select for transfer. In the right side you can choose the components which you wanted to transport.
Regards,
anil

How to create multi axis graph with 2 on change of fields and 2 values

Similar Messages

Maybe you are looking for