How to create multiple gradients in a compound path?

Hi, I am trying to color a compound path with multiple colors? Kinda similar to the effect here
I tried using the blend tool and replace the spline but it does not give the desired effect.
Any tips as to how to approach this?
I have made the G by creating a compound path.
Thank you!

namk,
You may:
1) Create a simple stroke/nofill path, with a stroke at least as wide as the semicircular end parts, which follows and fully covers the G shape of the compound path;
2) Ctrl/Cmd+X+B to bring it to the back, then give it the desired gradient along the stroke/path;
3) Select all and Object>Clipping Mask>Make.
If you wish to get the stroke back on top, you may:
4) Click the compund path with the Direct Selection Tool and reapply its stroke with the original weight.

Similar Messages

How to create multiple instance on same database

Hi ,
I would like to know how to create multiple instance on same database . I know that some people use database configuration assistant to do this but i could not figure out how they did it.
Any how if some one can help me with this and can give me links of this it would be great help for me.
Thank you for reading my problem and helping me !
Amil
please if possible mail me on [email protected]

How to create multiple instance?????Do you mean multiple instances on the same database, or multiple databases on the same machine ?
I m new to this field....
Willin to learn a lot about oracle....Then it wouldn't be bad reading a bit of Database Concepts

How to create multiple Tree Type Region In Tabular Form ?

Dear Friends,
i have to design tabular form to Distribute User Rioght to emp to access application
eg if i have Three module in application
1.Administration
2.Attendance
3.Accounts
Module
1 Administration have 5 Pages A,B,C,D,E.
Module
2 Attendance HAVE 4 Pages F,G,H,I
Module
3 Accounts HAVE 7 Pages J,K,L,M,N,O,P
I need these three module divided into three section in tabular form as a tree Type like
Module 1 Tree Open in Tabular Form like
- (Tree Mark Open )
=======================================================
PAGE_ID-------------SUBPAGE_ID-------VIEW-------------------MODIFY-------------------CREATE----------------------------TABLE COLUMN NAME
========================================================
Administration-----------A------------------CHECK bOX------------CHECK BOX-------------CHECK BOX
Administration-----------B------------------CHECK bOX------------CHECK BOX-------------CHECK BOX
Administration-----------C------------------CHECK bOX------------CHECK BOX-------------CHECK BOX
Administration-----------D------------------CHECK bOX------------CHECK BOX-------------CHECK BOX
Administration-----------E------------------CHECK bOX------------CHECK BOX-------------CHECK BOX
- (Tree Mark Open )
Module 2 Tree Open in Tabular Form like
Attendance-----------F------------------CHECK bOX------------CHECK BOX-------------CHECK BOX
Attendance-----------G------------------CHECK bOX------------CHECK BOX-------------CHECK BOX
Attendance-----------H------------------CHECK bOX------------CHECK BOX-------------CHECK BOX
Attendance-----------I------------------CHECK bOX------------CHECK BOX-------------CHECK BOX
- (Tree Mark Open )
Module 3 Tree Open in Tabular Form like
Accounts-------------J------------------CHECK bOX------------CHECK BOX-------------CHECK BOX
Accounts-------------K------------------CHECK bOX------------CHECK BOX-------------CHECK BOX
Accounts-------------L------------------CHECK bOX------------CHECK BOX-------------CHECK BOX
Accounts-------------M------------------CHECK bOX------------CHECK BOX-------------CHECK BOX
Accounts-------------N------------------CHECK bOX------------CHECK BOX-------------CHECK BOX
Accounts-------------O------------------CHECK bOX------------CHECK BOX-------------CHECK BOX
Accounts-------------P------------------CHECK bOX------------CHECK BOX-------------CHECK BOXi need divided these three Module in Tabular form in three region as tree.
Table APPLICATION_PAGE_DETAILS
ID                   NUMBER
PAGE_ID             NUMBER
SUB_PAGE_ID          NUMBER
========================
TABLE USER_RIGHT
======================
ID                  NUMBER
EMP_ID            NUMBER
PAGE_ID            NUMBER
SUB_PAGE_ID        NUMBER
VIEW                    VARCHAR2(1)
MODIFY                VARCHAR2(1)
CREATE                VARCHAR2(1)How to create multiple Tree Type Region In Tabular Form ?
How can i do this ?
Thanks
Edited by: Vedant on Oct 4, 2011 3:21 AM
Edited by: Vedant on Oct 4, 2011 9:09 PM
Edited by: Vedant on Oct 13, 2011 8:57 PM

Well think of it I believe the scenario is too bird viewed hence the solution can't be exact.
But thinking of a possible solution every time a child operation fails have a catch block where you you go back to system if the parent needs to be deleted if yes, call Delete Method on the parent.
Note: Make sure that the decision on whether or not the parent record needs to be deleted will depends on the question "Does Parent Record already has several other children associated to it or not"
Hope this clarifies.
Regards,
Messer

How to create multiple pages in the output file?

hi, we have an application (C++) that generates PDF output. I've been asked to figure out how to create multiple copies of each page (uncollated). i.e. the output would be 4 copies of p 1 followed by 4 copies of p 2, etc. I'd like to do this without actually replicating each page if possible ... any ideas?

Why not just put four copies of the same CosObj reference into the Pages array/tree?

How to create multiple toolbar buttons in jsp ?

hi all,
how to create multiple toolbar buttons in jsp ?
plz help me

mgmt
plzhttp://www.catb.org/~esr/faqs/smart-questions.html#writewell
How To Ask Questions The Smart Way
Eric Steven Raymond
Rick Moen
Write in clear, grammatical, correctly-spelled language
We've found by experience that people who are careless and sloppy writers are usually also careless and sloppy at thinking and coding (often enough to bet on, anyway). Answering questions for careless and sloppy thinkers is not rewarding; we'd rather spend our time elsewhere.
So expressing your question clearly and well is important. If you can't be bothered to do that, we can't be bothered to pay attention. Spend the extra effort to polish your language. It doesn't have to be stiff or formal ? in fact, hacker culture values informal, slangy and humorous language used with precision. But it has to be precise; there has to be some indication that you're thinking and paying attention.
Spell, punctuate, and capitalize correctly. Don't confuse "its" with "it's", "loose" with "lose", or "discrete" with "discreet". Don't TYPE IN ALL CAPS; this is read as shouting and considered rude. (All-smalls is only slightly less annoying, as it's difficult to read. Alan Cox can get away with it, but you can't.)
More generally, if you write like a semi-literate b o o b you will very likely be ignored. So don't use instant-messaging shortcuts. Spelling "you" as "u" makes you look like a semi-literate b o o b to save two entire keystrokes.

How to create multiple segments on the target structure of an IDOC

Hi All
I am working on the Shipment Confirmation Interface( Message Type SHPCON ) which is FILE to IDOC Scenario. I have a segment called E1EDL18 which occurs only once on the target side of the idoc. Now I have to created multiple E1EDl18 segments for the Qualifiers ORI, PGI and PCK. I treid to send a constant ORI,PGI,PCK and then used an user defined function which splits the constant at COMMA and then I am assigning to the target field QUALF. In the display queue for QUALF I see three values with context but still only one E1EDL!* segment is created. Please let me know how to create multiple E1EDl18 segments for three qualifiers.
Thanks
Naga

In message Mapping, just right click on the segment and click on duplicate subtree. now it will create you another segment with same name and fields in it..
you can hard code the Qual, or you can map the required source field into it.

How to create multiple selection screens in reports

How to create multiple selection screens in reports
Thanks,
Sridhar

Ex: hope you will find an idea from the below example :
SELECTION-SCREEN BEGIN OF BLOCK SEL1 WITH FRAME TITLE TIT1.
PARAMETERS: CITYFR LIKE SPFLI-CITYFORM,
            CITYTO LIKE SPFLI-CITYFORM.
SELECTION-SCREEN end OF BLOCK SEL1
SELECTION-SCREEN BEGIN OF SCREEN 500 AS WINDOW.
SELECTION-SCREEN INCLUDE BLOCKS SEL1.
SELECTION-SCREEN BEGIN OF BLOCK SEL2 WITH FRAME TITLE TIT2 .
PARAMETERS: AIRPFFR LIKE SPFLI-AIRPFROM,
            AIRPTO LIKE SPFLI-AIRPTO.
SELECTION-SCREEN END OF BLOCK SEL2
SELECTION-SCREEN END OF SCREEN 5000.
INITIALIZATION.
TIT1 = 'ITIES'.
aT SELECTION-SCREEN.
CASE SY-DYNNR.
WHEN '0500'.
   MESSAGE W159(at) WITH 'SCREEN 500'.
WHEN '1000'.
   MESSAGE W159(at) WITH 'SCREEN 1000'.
ENDCASE.
START-OF-SELECTION.
TIT1 = 'CITIES FOR AIRPORTS'.
TIT2 = 'AIRPORTS'.
CALL SELECTION-SCREEN 500 STARTING AT 10 10.
TIT1 = 'CITIES AGAIN'.
CALL SELECTION-SCREEN 1000 STARTING AT 10 10.

How to create multiple Idocs in SAP R3 ?

I have been asked question on Idocs from MNC company.
How to create multiple idocs in R3 ? Please let me know.

hi ,
if you want to create in multiple IDOCS in XI , take XSD of IDOC and chnage the occurance to 1 to UNBOUNDED, you can genarate multiple IDOCS.
Regards,
Raj

[How-to] Create multiple Artboards in existing document?

Herro,
I'm wondering how to create multiple artboards at once in an existing document. I can manually re-arrange them later, that's fine. But I often find myself needing to create 20+ artboards for some of my complex projects.
Currently, adding those 20+ artboards manually is a pain as you can imagine.
Help?
Cheers.

open the Artboards panel. (Window->Artboards)
then down the bottom start clacking away at the new artboard button.

How to create multiple BOM of same parent item?

Hi All,
Please guide me, How to create multiple BOM of same parent item? I tried but system throws a message as same Parent Item already exist in the table. I am afraid if system supports this functionality or not?

Hi,
You are welcome.......
Well the exact process would be as I mentioned in my previous post.
1. Create the BOM for an item
2. Choose this item in the Production Order
3. Then in this Production order you can change/ delete/ add whichever item you want .
OR
If all the child items are completely different from the original BOM then you can use the Special Type BOM in which you can always create the BOM while creating the Production Order itself. There is no standard BOM here.
J Nagesh

How to create multiple ifs users using XML

I used the following xml file to create a ifs user. But I don't know how to create multiple users using XML. Thanks for your help.
<SimpleUser>
<UserName>bill</UserName>
<Password>bill</Password>
<DirectoryUserDescription>Bill</DirectoryUserDescription>
</SimpleUser>

There are many good resources for Powershell tutorials. The MS help page for each cmdlet is usually a good place to start.
The suggested answer is very good and easy to modify to your needs. The linked article provides good detail on creating your csv file. If you look at their sample csv, you will see the column for LicenseAgreement and UsageLocation. You can change the script
to use the values from the csv instead of the same value for every user like so:
-LicenseAssignment $_.LicenseAgreement -UsageLocation $_UsageLocation
Basically, $_.<valuename> is the filled in by the value under the heading <valuename> in your csv file for the current user.
As for what msdivision, replace this with the correct domain name value for your organization. You can get the values for license SKUs from existing users by using the following:
Connect-MsolService
Get-MsolUser -UserPrincipalName <userprincipalname> |select Licenses

How to create multiple physical channels using DAQmx?

Hi, I am new to Labview.
Can anyone please help me on how to create multiple physical channels? I am following the LabVIEW examples in the NI example finder but they are only for acquiring signals from one channel.
Actually, I am using the channels of an SCXI 1520 to measure voltage signals. And one more thing, in the NI Example Finder, they are sample codes there for setting the filter in SCXI 114x.
Will this example work with an SCXI 1520, too?
Thanks!

There are many ways to read multiple channels in LabVIEW. First, if you look at that example that lets you set the filter setting on the 114x and you click on the 'Physical Channel Listbox' then click 'Browse' you can see that you can select multiple channels. After you select the channels and hit 'Ok' it will build a multiple channel string. This is one way to read multiple channels.
Next, you can create a 'Task' in Measurement and Automation Explorer(MAX). When you create this task select all the channels that you need to read then back in LabVIEW simply select a 'DAQmx Task Name Constant' Select the task you just created and wire that to an Input of your first DAQ VI. If you do this you do not need to have a 'DAQmx Create Physical Channel' VI or create
Task because it is already created in MAX.
When looking at example VIs you can tell if a multi-channel read is acceptable by looking at the 'DAQmx Read' and if it says NChan that means it will do a multichannel read. There are tons of example programs that will display the multichannel read capabilities.
This example may not work for the 1520 because the properties that are set could possibly be specific to the 142x. When using the 1520 though it is very likely that the properties will be very similar if not exact. You will simply put a DAQmx Channel property node on your block diagram and then look for the Lowpass filter settings properties that will most likely be in the same location. Now another way todo this without using a property node would be in MAX when you create a task set the filter settings from the Device tab in the task configure window.
Let me know if you need anymore help with reguards to this issue! Have a great day!
Allan S.
National Instrument
s
Applications Engineering

How to Create Multiple Distribution Groups

How to Create Multiple Distribution Groups using power shell?
i have created new csv file with below format
Name,Type
Test01,Distribution
test02,Distribution
Executed below command and it's prompting for each and every account to enter the sam account name.
[PS] C:\Windows\system32>Import-CSV "c:\dl\users.csv" | foreach {new-distributiongroup -name $_.name type $_.Type}
cmdlet New-DistributionGroup at command pipeline position 1
Supply values for the following parameters:
SamAccountName:
is there any other way to create bulk DL groups?
Aucsna

Please check this here is a similar thread.
http://social.technet.microsoft.com/Forums/exchange/en-US/0f86bb8a-63a2-44e5-921f-4a227221e71d/creating-distribution-groups
Thanks, MAS
Please mark as helpful if you find my comment helpful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.

How to create transparency gradient

Hi
please share how to create transparency gradient
have attached the example

qanibh,
In the newest version(s), you may specify opacity values for the Gradient Fill.
In older versions,, you may:
1) Create the shape with the solid end colour upon the seethrough background;
2) Copy to the front, apply a gradient to the copy, and in the Transparency palette/panel flyout Make Opacity Mask, setting Clip and Invert as wished.

How to create a gradient field in CS5 that doesn't striate when printed?

Can someone explain how to create a large gradient field in CS5 that won't striate when printed? I created a poster, 18" x 24" in which the bottom third gradates from olive to black. When it prints there are thick paralell bands which are undesirable. The tips I found online go back to 2009 which don't apply to CS5. The directions in the CS5 manual are confusing to me. Is there a simple way to do this?

Is your monitor well calibrated?
Did you print it locally on your own printer before sending it out?
After you've exhausted everything else, you might consider creating a small test file with the offending gradient, and physically carry it to one of the printing locations, and speak to a technician there. Honestly, it sounds like a profile mismatch, but if this has happened at multiple Kinkos locations, then I agree, it would seem the problem is most likely in the file.
Have you looked at individual channels? (R,G,B)
One other idea: you say it's olive to black ... you could try an olive gradient from 100% opacity to 0% opacity, placed over a solid black layer, (or alteratively, a similar black gradient over solid olive) and see if that improves the output. Beware, some printers are really bad at 0%-5% values. If the gradient is going from 100% of one color to 0%, this might be contributing to the problem. Try going from 100% to 5% if this is the case.
One last thing: can you post a portion of the offending area of the image here?

How to create multiple gradients in a compound path?

Similar Messages

Maybe you are looking for