How to create multiple layout in single reprot
How can we make different layout on the base of single report. Let suppose, we will pass parameter which call layout1, layout2 or 3.
Any idea.
user-Keen wrote:
How can we make different layout on the base of single report. Let suppose, we will pass parameter which call layout1, layout2 or 3.
Any idea.An idea.
Make different layout different report for one report and call any one based on your choice.
Hope , it helps.
Similar Messages
-
How to create multiple nodes for single activity in workflow.
Hi Gurus,
I am developing the PR workflow. and in that I want to create 2 different nodes for signle activity.
how can I create those multiple outcomes for signel activity in workflow.
Thanks in Advcance.
VinodHi ,
You can use Outcomes tab in your workflow step...
What is the step... is it related to release...
what is that you want to do...
Regards
Gautam -
Can we create multiple application with single MSI(or Same MSI) in biztalk admin console ?
My client requirement is process 100 files from biztalk with in 5 min ,actually it is taking 20 min .
So I decided to created same instance of the application with multiple time in BTS admin console ,as I understand biztalk admin console never allow to install same
schema’s with multiple time .
Any help can be appreciate ..BizTalk will automatically process multiple messages on separate threads so you may need to tune your system. The following link should get you started:
http://social.technet.microsoft.com/wiki/contents/articles/7801.biztalk-server-performance-tuning-optimization.aspx
Another possibility is to set the Batch Size property on your receive location if the adapter uses batch size to determine how messages are picked up. As an example, it you want the MSMQ adapter to immediately pick up messages and start
to process them, set the batch size to 1.
You may also need to distribute the processing across multiple BizTalk servers by installing BizTalk on additional servers and joining the existing BizTalk group.
David Downing... If this answers your question, please Mark as the Answer. If this post is helpful, please vote as helpful. -
How to Pass multiple parameter into single store procedure
How to Pass multiple parameter into single store procedure
like a one to many relationship.
it is possible then reply me immediatlyyou mean like this .....
CREATE OR REPLACE procedure display_me(in_param in varchar2,in_default in varchar2 := 'Default') is
BEGIN
DBMS_OUTPUT.put_line ('Values is .....'||in_param || '....'||in_default);
END display_me;
CREATE OR REPLACE procedure display_me_2 as
cnt integer :=0;
BEGIN
For c1_rec In (SELECT empno,deptno FROM test_emp) Loop
display_me(in_param => c1_rec.empno);
cnt := cnt+1;
end loop;
DBMS_OUTPUT.put_line('Total record count is ....'||cnt);
END display_me_2;
SQL > exec display_me_2
Values is .....9999....Default
Values is .....4567....Default
Values is .....2345....Default
Values is .....7369....Default
Values is .....7499....Default
Values is .....7521....Default
Values is .....7566....Default
Values is .....7654....Default
Values is .....7698....Default
Values is .....7782....Default
Values is .....7788....Default
Values is .....7839....Default
Values is .....7844....Default
Values is .....7876....Default
Values is .....7900....Default
Values is .....7902....Default
Values is .....7934....Default
Values is .....1234....Default
Total record count is ....18 -
How to create Multiple URL of a webservice ?
Hi,
I want to create multiple URL of single web service and runtime I want to know which URL is used to call web service.
How to do that ?
Regards,
AjayHow to do what exactly? What do you mean by multiple URLs? And what exactly is "during runtime", in what bit of code do you want to check this and why?
I can make a guess (I shouldn't have to do that, you should be providing details): this is intended to deploy a webservice to different environments (test, acceptance, prod) and you need to tell your application which deployed instance of the webservice it should be calling, which you do by providing a specific URL. Am I right? -
How to create multiple instance on same database
Hi ,
I would like to know how to create multiple instance on same database . I know that some people use database configuration assistant to do this but i could not figure out how they did it.
Any how if some one can help me with this and can give me links of this it would be great help for me.
Thank you for reading my problem and helping me !
Amil
please if possible mail me on [email protected]How to create multiple instance?????Do you mean multiple instances on the same database, or multiple databases on the same machine ?
I m new to this field....
Willin to learn a lot about oracle....Then it wouldn't be bad reading a bit of Database Concepts -
How to send multiple attachements in single mail
Hi All,
Currently i am using this function module SO_NEW_DOCUMENT_ATT_SEND_API1 to send mail with only one attachment.
But now i need to send multiple attachments to a single mail.
Can any one please tell me as how to send multiple attachments in single mail.
Thanks in advance.Hi
See this and do accordingly
Mailing with Attachment by ABAP Coding
Refer this link:
Mail with attachment.
FORM send_list_to_basis .
DATA: w_path LIKE rlgrap OCCURS 0 WITH HEADER LINE,
lt_index TYPE sy-tabix,
doc_type(3) TYPE c,
descr LIKE it_objpack_basis-obj_descr,
temp_data LIKE w_path,
temp1 TYPE string,
tab_lines TYPE i,
langu(15) TYPE c,
expirydate TYPE so_obj_edt,
L_FILE1(100).
CONCATENATE 'C:\' sy-repid '_' sy-datum '.XLS' INTO L_FILE1.
W_PATH-FILENAME = L_FILE1.
APPEND w_path.
CLEAR w_path.
wa_doc_chng-obj_descr = 'User List not logged on for 180 days'.
wa_doc_chng-obj_langu = 'E'.
wa_doc_chng-obj_expdat = sy-datum.
CLEAR w_subject.
CONCATENATE 'Please find attached document with list of users'
'not logged on for 180 days for client' sy-mandt
INTO w_subject SEPARATED BY space.
it_objtxt_basis-line = w_subject.
APPEND it_objtxt_basis.
CLEAR it_objtxt_basis.
it_objtxt_basis-line = text-004.
APPEND it_objtxt_basis.
CLEAR it_objtxt_basis.
CLEAR w_tab_line.
DESCRIBE TABLE it_objtxt_basis LINES w_tab_line.
READ TABLE it_objtxt_basis INDEX w_tab_line INTO l_cline.
wa_doc_chng-doc_size =
( w_tab_line - 1 ) * 255 + STRLEN( l_cline ).
CLEAR it_objpack_basis-transf_bin.
it_objpack_basis-head_start = 1.
it_objpack_basis-head_num = 0.
it_objpack_basis-body_start = 1.
it_objpack_basis-body_num = w_tab_line.
it_objpack_basis-doc_type = 'RAW'.
APPEND it_objpack_basis.
CLEAR it_objpack_basis.
LOOP AT w_path.
temp1 = w_path.
descr = w_path.
CALL FUNCTION 'STRING_REVERSE'
EXPORTING
string = descr
lang = 'E'
IMPORTING
rstring = descr.
CALL FUNCTION 'STRING_SPLIT'
EXPORTING
delimiter = '\'
string = descr
IMPORTING
head = descr
tail = temp_data.
CALL FUNCTION 'STRING_REVERSE'
EXPORTING
string = descr
lang = 'E'
IMPORTING
rstring = descr.
CALL FUNCTION 'STRING_SPLIT'
EXPORTING
delimiter = '.'
string = descr
IMPORTING
head = temp_data
tail = doc_type.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = temp1
filetype = 'BIN'
header_length = 0
read_by_line = 'X'
replacement = '#'
TABLES
data_tab = it_upload.
DESCRIBE TABLE it_upload LINES tab_lines.
DESCRIBE TABLE it_objbin_basis LINES lt_index.
lt_index = lt_index + 1.
LOOP AT it_upload.
wa_objbin_basis-line = it_upload-line.
APPEND wa_objbin_basis TO it_objbin_basis.
CLEAR wa_objbin_basis.
ENDLOOP.
it_objpack_basis-transf_bin = 'X'.
it_objpack_basis-head_start = 0.
it_objpack_basis-head_num = 0.
it_objpack_basis-body_start = lt_index.
it_objpack_basis-body_num = tab_lines.
it_objpack_basis-doc_type = doc_type.
it_objpack_basis-obj_descr = descr.
it_objpack_basis-doc_size = tab_lines * 255.
APPEND it_objpack_basis.
CLEAR it_objpack_basis.
ENDLOOP.
it_reclist_basis-receiver = '[email protected]'.
it_reclist_basis-rec_type = 'U'.
APPEND it_reclist_basis.
CLEAR it_reclist_basis.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = wa_doc_chng
put_in_outbox = 'X'
commit_work = 'X'
TABLES
packing_list = it_objpack_basis
contents_txt = it_objtxt_basis
contents_bin = it_objbin_basis
receivers = it_reclist_basis
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
operation_no_authorization = 4
OTHERS = 99.
IF sy-subrc EQ 0.
SUBMIT rsconn01 WITH mode = 'INT' AND RETURN.
ENDIF.
ENDFORM. " send_list_to_basis
<b>Reward points for useful Answers</b>
Regards
Anji -
Create multiple rule in single alert category
Hi All,
any body tell me can we create multiple rule in single alert category.When i click on a add rule button in existing category nothing will happen same page will come with existing data.
Thanks & Regards
SamarjitHI,
you can define alert category multiple rules.. see the below links
http://help.sap.com/saphelp_nw2004s/helpdata/en/bb/f0033c128f4a7de10000000a114084/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/45/23827054604aa8e10000000a11466f/content.htm
You must define the binding from the task container to the rule container for each rule. For further information, refer to Rule Resolution
http://help.sap.com/saphelp_nw2004s/helpdata/en/c5/e4b5aa453d11d189430000e829fbbd/content.htm
Regards
Chilla -
How to create multiple Tree Type Region In Tabular Form ?
Dear Friends,
i have to design tabular form to Distribute User Rioght to emp to access application
eg if i have Three module in application
1.Administration
2.Attendance
3.Accounts
Module
1 Administration have 5 Pages A,B,C,D,E.
Module
2 Attendance HAVE 4 Pages F,G,H,I
Module
3 Accounts HAVE 7 Pages J,K,L,M,N,O,P
I need these three module divided into three section in tabular form as a tree Type like
Module 1 Tree Open in Tabular Form like
- (Tree Mark Open )
=======================================================
PAGE_ID-------------SUBPAGE_ID-------VIEW-------------------MODIFY-------------------CREATE----------------------------TABLE COLUMN NAME
========================================================
Administration-----------A------------------CHECK bOX------------CHECK BOX-------------CHECK BOX
Administration-----------B------------------CHECK bOX------------CHECK BOX-------------CHECK BOX
Administration-----------C------------------CHECK bOX------------CHECK BOX-------------CHECK BOX
Administration-----------D------------------CHECK bOX------------CHECK BOX-------------CHECK BOX
Administration-----------E------------------CHECK bOX------------CHECK BOX-------------CHECK BOX
- (Tree Mark Open )
Module 2 Tree Open in Tabular Form like
Attendance-----------F------------------CHECK bOX------------CHECK BOX-------------CHECK BOX
Attendance-----------G------------------CHECK bOX------------CHECK BOX-------------CHECK BOX
Attendance-----------H------------------CHECK bOX------------CHECK BOX-------------CHECK BOX
Attendance-----------I------------------CHECK bOX------------CHECK BOX-------------CHECK BOX
- (Tree Mark Open )
Module 3 Tree Open in Tabular Form like
Accounts-------------J------------------CHECK bOX------------CHECK BOX-------------CHECK BOX
Accounts-------------K------------------CHECK bOX------------CHECK BOX-------------CHECK BOX
Accounts-------------L------------------CHECK bOX------------CHECK BOX-------------CHECK BOX
Accounts-------------M------------------CHECK bOX------------CHECK BOX-------------CHECK BOX
Accounts-------------N------------------CHECK bOX------------CHECK BOX-------------CHECK BOX
Accounts-------------O------------------CHECK bOX------------CHECK BOX-------------CHECK BOX
Accounts-------------P------------------CHECK bOX------------CHECK BOX-------------CHECK BOXi need divided these three Module in Tabular form in three region as tree.
Table APPLICATION_PAGE_DETAILS
ID NUMBER
PAGE_ID NUMBER
SUB_PAGE_ID NUMBER
========================
TABLE USER_RIGHT
======================
ID NUMBER
EMP_ID NUMBER
PAGE_ID NUMBER
SUB_PAGE_ID NUMBER
VIEW VARCHAR2(1)
MODIFY VARCHAR2(1)
CREATE VARCHAR2(1)How to create multiple Tree Type Region In Tabular Form ?
How can i do this ?
Thanks
Edited by: Vedant on Oct 4, 2011 3:21 AM
Edited by: Vedant on Oct 4, 2011 9:09 PM
Edited by: Vedant on Oct 13, 2011 8:57 PMWell think of it I believe the scenario is too bird viewed hence the solution can't be exact.
But thinking of a possible solution every time a child operation fails have a catch block where you you go back to system if the parent needs to be deleted if yes, call Delete Method on the parent.
Note: Make sure that the decision on whether or not the parent record needs to be deleted will depends on the question "Does Parent Record already has several other children associated to it or not"
Hope this clarifies.
Regards,
Messer -
How to create multiple pages in the output file?
hi, we have an application (C++) that generates PDF output. I've been asked to figure out how to create multiple copies of each page (uncollated). i.e. the output would be 4 copies of p 1 followed by 4 copies of p 2, etc. I'd like to do this without actually replicating each page if possible ... any ideas?
Why not just put four copies of the same CosObj reference into the Pages array/tree?
-
How to create a layout for tcode fbl1n
hi..
i want to know how to create a layout for flbl1n.pls provide me a step by step approach.
regardsHi,
Its simple :
1. Display Report FBL1n.
2. Select/ deselect coloumns you want with button ' Change Layout ( Ctrl + F8 ) '.
3. Click Save Layout button( Ctrl + F12 ). Give a new name for layout.
Regards
Srikanth M -
How to attach Multiple attachments to single mail
How to attach multiple pdfs to single mail ?
or
how to attach one pdf & One excel & One word document to single mail ?
Thanks In AdvanceHello Karunya,
Please refer to the link below.
https://wiki.sdn.sap.com/wiki/display/Snippets/Send%20email%20with%20multiple%20zipped%20attachments
Regards,
P Bansal -
Dear All
Can you help me How To Use Multiple Currencies in single payroll?
with regards
User600722I am not a functional expert. but ML Note 150173.1 (which is quite old) states that this is not possible.
Srini -
How to create multiple toolbar buttons in jsp ?
hi all,
how to create multiple toolbar buttons in jsp ?
plz help memgmt
plzhttp://www.catb.org/~esr/faqs/smart-questions.html#writewell
How To Ask Questions The Smart Way
Eric Steven Raymond
Rick Moen
Write in clear, grammatical, correctly-spelled language
We've found by experience that people who are careless and sloppy writers are usually also careless and sloppy at thinking and coding (often enough to bet on, anyway). Answering questions for careless and sloppy thinkers is not rewarding; we'd rather spend our time elsewhere.
So expressing your question clearly and well is important. If you can't be bothered to do that, we can't be bothered to pay attention. Spend the extra effort to polish your language. It doesn't have to be stiff or formal ? in fact, hacker culture values informal, slangy and humorous language used with precision. But it has to be precise; there has to be some indication that you're thinking and paying attention.
Spell, punctuate, and capitalize correctly. Don't confuse "its" with "it's", "loose" with "lose", or "discrete" with "discreet". Don't TYPE IN ALL CAPS; this is read as shouting and considered rude. (All-smalls is only slightly less annoying, as it's difficult to read. Alan Cox can get away with it, but you can't.)
More generally, if you write like a semi-literate b o o b you will very likely be ignored. So don't use instant-messaging shortcuts. Spelling "you" as "u" makes you look like a semi-literate b o o b to save two entire keystrokes. -
How to create multiple segments on the target structure of an IDOC
Hi All
I am working on the Shipment Confirmation Interface( Message Type SHPCON ) which is FILE to IDOC Scenario. I have a segment called E1EDL18 which occurs only once on the target side of the idoc. Now I have to created multiple E1EDl18 segments for the Qualifiers ORI, PGI and PCK. I treid to send a constant ORI,PGI,PCK and then used an user defined function which splits the constant at COMMA and then I am assigning to the target field QUALF. In the display queue for QUALF I see three values with context but still only one E1EDL!* segment is created. Please let me know how to create multiple E1EDl18 segments for three qualifiers.
Thanks
NagaIn message Mapping, just right click on the segment and click on duplicate subtree. now it will create you another segment with same name and fields in it..
you can hard code the Qual, or you can map the required source field into it.
Maybe you are looking for
-
How to tell which pages are linked to a template
How can you tell, from a template, all of the pages which it affects. I have some "junk" templates that are from previous experiments which I am trying to remove, I wouldn't want them to be a part of something important.
-
I need to reset my password under "General" and then "Restrictions". I cannot remember and have 27 failed attempts. HELP!
-
When to use COFC and CO1P?
Hello, What is the function of COFC and CO1P respectively? When to use them? Thanks LinLin
-
I am making a cartoon, which was created in FLASH, Then the SWF's were put into After Effects and exported out as MOV's. (I've tried both AppleProRes4444 and Animation codecs). Then I put those Mov's into Premiere. Everything looks crisp until I rend
-
Question about function parameters
Looking at a piece of code. A function is defined with 3 parameters. None of the parameters are "default" parameters. Call to the function only passes 2 paramters. ie myfunc(parm1,parm2). Have read the docs regarding function parameters. Not sure