How to create multiple modules in quizzes in single file?

Hi,
Can someone guide me how to create a multiple module quizzes under one captivate file ( captivate 5.5 ver)
I have a quiz.cptx file with 50 questions from different chapters A,B,C,D,E with 10 questions in each chapter.
The scenario
Note : min 80% score per chapter is the passing criteria
1. Start the quiz after login and password
2. Start the quiz for chapter A ( 10 questions)
3. score for chapter A should be displayed
4. If "cpQuizInfoPointsscored"'s value < = 40 ; ie 80 % for chapter A
         review of the failed questions in the chapter
         OR
         retake quiz for that chapter should be triggered,
   else goto chapter B
5. Start the quiz for chapter B ( 10 questions)
3. score for chapter B should be displayed
5. If "cpQuizInfoPointsscored"'s value < = 40 ; ie 80 % for chapter B
         review of the failed questions in the chapter
         OR
         retake quiz for that chapter should be triggered,
   else goto chapter C
6. //rly with other chapters
7. After passing all chapters the result should be printer based on the scores.
Is there any better ideas to crack the steps 4 - 6, bcz i am not able to reset the value of "cpQuizInfoPointsscored"; which is incremented as each question is completed.

Welcome to the forum,
Agree totally with Rod, this can be done with advanced actions (have some examples on my blog), but it is a lot of work. And the Quizzing system variables such as cpQuizINfoPointsscored are all read only, no way to change them by advanced actions at all.
If you want to transfer variable values from one file to another, like from the different quiz files to a main file (to take decisions over there about possible branchings), you should have a look at Michael Lund's Save & Load Data widget:
Save & Load Data widget
Lilybiri

Similar Messages

How to create multiple WIP jobs from a single Sales Order Line

Hi all,
I want to know if there's a standard way to create multiple single unit wip jobs from a sales order line which has 2 or more units, i mean...
I have a sales order line with item A with 3 units. If I progress the sales order, a single job is automatically created in WIP with 3 units to be created. What i want is to create 3 jobs with one unit each, all of them linked to the sales line order...
Thanks in advance!
Regards!

Assuming simplest of scenarios....
In case of changes to Sales order qty, an unplanned order will simply disappear.
If a wip job has already been created, you will get a cancel message (in case the job is not needed) or a reschedule out message (if the quantity needs to be reduced).
ASCP will give you a reschedule in /out message if the dates change.
Sandeep Gandhi

How to create multiple Tree Type Region In Tabular Form ?

Dear Friends,
i have to design tabular form to Distribute User Rioght to emp to access application
eg if i have Three module in application
1.Administration
2.Attendance
3.Accounts
Module
1 Administration have 5 Pages A,B,C,D,E.
Module
2 Attendance HAVE 4 Pages F,G,H,I
Module
3 Accounts HAVE 7 Pages J,K,L,M,N,O,P
I need these three module divided into three section in tabular form as a tree Type like
Module 1 Tree Open in Tabular Form like
- (Tree Mark Open )
=======================================================
PAGE_ID-------------SUBPAGE_ID-------VIEW-------------------MODIFY-------------------CREATE----------------------------TABLE COLUMN NAME
========================================================
Administration-----------A------------------CHECK bOX------------CHECK BOX-------------CHECK BOX
Administration-----------B------------------CHECK bOX------------CHECK BOX-------------CHECK BOX
Administration-----------C------------------CHECK bOX------------CHECK BOX-------------CHECK BOX
Administration-----------D------------------CHECK bOX------------CHECK BOX-------------CHECK BOX
Administration-----------E------------------CHECK bOX------------CHECK BOX-------------CHECK BOX
- (Tree Mark Open )
Module 2 Tree Open in Tabular Form like
Attendance-----------F------------------CHECK bOX------------CHECK BOX-------------CHECK BOX
Attendance-----------G------------------CHECK bOX------------CHECK BOX-------------CHECK BOX
Attendance-----------H------------------CHECK bOX------------CHECK BOX-------------CHECK BOX
Attendance-----------I------------------CHECK bOX------------CHECK BOX-------------CHECK BOX
- (Tree Mark Open )
Module 3 Tree Open in Tabular Form like
Accounts-------------J------------------CHECK bOX------------CHECK BOX-------------CHECK BOX
Accounts-------------K------------------CHECK bOX------------CHECK BOX-------------CHECK BOX
Accounts-------------L------------------CHECK bOX------------CHECK BOX-------------CHECK BOX
Accounts-------------M------------------CHECK bOX------------CHECK BOX-------------CHECK BOX
Accounts-------------N------------------CHECK bOX------------CHECK BOX-------------CHECK BOX
Accounts-------------O------------------CHECK bOX------------CHECK BOX-------------CHECK BOX
Accounts-------------P------------------CHECK bOX------------CHECK BOX-------------CHECK BOXi need divided these three Module in Tabular form in three region as tree.
Table APPLICATION_PAGE_DETAILS
ID                   NUMBER
PAGE_ID             NUMBER
SUB_PAGE_ID          NUMBER
========================
TABLE USER_RIGHT
======================
ID                  NUMBER
EMP_ID            NUMBER
PAGE_ID            NUMBER
SUB_PAGE_ID        NUMBER
VIEW                    VARCHAR2(1)
MODIFY                VARCHAR2(1)
CREATE                VARCHAR2(1)How to create multiple Tree Type Region In Tabular Form ?
How can i do this ?
Thanks
Edited by: Vedant on Oct 4, 2011 3:21 AM
Edited by: Vedant on Oct 4, 2011 9:09 PM
Edited by: Vedant on Oct 13, 2011 8:57 PM

Well think of it I believe the scenario is too bird viewed hence the solution can't be exact.
But thinking of a possible solution every time a child operation fails have a catch block where you you go back to system if the parent needs to be deleted if yes, call Delete Method on the parent.
Note: Make sure that the decision on whether or not the parent record needs to be deleted will depends on the question "Does Parent Record already has several other children associated to it or not"
Hope this clarifies.
Regards,
Messer

How to create multiple instance on same database

Hi ,
I would like to know how to create multiple instance on same database . I know that some people use database configuration assistant to do this but i could not figure out how they did it.
Any how if some one can help me with this and can give me links of this it would be great help for me.
Thank you for reading my problem and helping me !
Amil
please if possible mail me on [email protected]

How to create multiple instance?????Do you mean multiple instances on the same database, or multiple databases on the same machine ?
I m new to this field....
Willin to learn a lot about oracle....Then it wouldn't be bad reading a bit of Database Concepts

How to create Multiple Address for a single customer

Respected Members,
In tcode Xd01 we create on customer but there we can maintain only one address but sometimes a scenario can be that single customer can have different address .
How to do that.Any exit is available to create multiple address with creation of single customer.
This provision is given while creating a Business Partner.Tcode is BP .In this Address Overview tab is there and you maintain multiple address to single Busines partner.
Same thing can we do for the customer.
Any solutions or suggestions,please give me your support.
Thanks

Hello Manish,
Unfortunately Customers have only one address. However you can use contact persons to store different addresses, or (in the Sales view) you can assign other partner functions with different addresses (e.g. one customer acting as the Sold-to partner may have different Ship-to partners).
If these options do not meet your requirements, you could extend the customer master data with your own functionality and enhance transaction XD01 with your own screens for holding alternate addresses.
Regards,
John.

How to create function module for getting customer name

Hi Experts,
How to create function module? when in import parameter kunnr values to be passed it must give name1 details according to the customer number...
how to write the logic in source code....
Regards,
Thiru. R

1. First of all create function group.
2. Create function module using this function group.
3. If only one kunnr is needed at a time, create import parameter for it. But if many kunnr to be entered at a time,use table.
4. Fetch name1 for each kunnr from KNA1 table.
"->> if many kunnr
if not t_kunnr[] is initial.
select kunnr as kunnr name1 as name1
into table t_kunnr_name1
from kna1
for all entried in table t_kunnr
where kunnr = t_kunnr-kunnr.
endif.
sort t_kunnr_name1 by kunnr name1.
delete adjacent duplicates from t_kunnr_name1 comparing kunnr name1.
table t_kunnr_name1 will contain kunnr and its name1.
I hope logic is clear for you now.
Regards,
Aparna

How to create multiple page pdf file

Hello,
Sometimes I need to create multiple (more precisely double) page pdf file from another pdf file to reduce the printing cost of the document. For this I crop the single page document and then print it in a double page pdf file (in landscape).
But I am still facing a problem in this regard. When I make a double page pdf the gutter (distance between two pages, left and right) is more than 1.5 inch. This is a great problem. Can anyone tell me how to reduce the gutter when making a double page pdf file (don't just suggest to crop the single page pdf, i tried this as well, I cropped using the feature "remove white margin" but still there is more than 1.5 inch between two pages)
Please help me.
Thanks in advance.
Regards
mathmad

When you print, select the printer properties for the Adobe PDF printer. On the layout tab is an option for the number of pages per sheet. In some versions it is listed as multi-up as I recall. I did not say to simply print from the 2-up display. It is a printer option, not a display option.

How to create multiple pages in the output file?

hi, we have an application (C++) that generates PDF output. I've been asked to figure out how to create multiple copies of each page (uncollated). i.e. the output would be 4 copies of p 1 followed by 4 copies of p 2, etc. I'd like to do this without actually replicating each page if possible ... any ideas?

Why not just put four copies of the same CosObj reference into the Pages array/tree?

How to create a module pool program

Dear Guru
I want to know know how to create a module pool program from se80 step by step. I want to know the steps where i will get the four includes like form routines, PAI, PBO, and global data please its very urgent.
Thanks & regards
Saifur Rahaman

hi Saifur Rahaman,
goto se80 then click find program,
next u want any name of the program enter as,
Attribute type as find Module pool click it.
next u want any package and save and activate.
program name with create screen with any number then
click layout and u want any object and save , actived.
click flow logic , four types as PBO and PAI and POV, POH.
PBO---> Trigger is before screen.
its applied for display screen and inactive or no display screen only
PAI--->Trigger is after screen
when u want button then its processed.
POV--> Value requested for F4.
POH-->Help requested for F1.
Reward if useful,
S.Suresh.

How to create multiple toolbar buttons in jsp ?

hi all,
how to create multiple toolbar buttons in jsp ?
plz help me

mgmt
plzhttp://www.catb.org/~esr/faqs/smart-questions.html#writewell
How To Ask Questions The Smart Way
Eric Steven Raymond
Rick Moen
Write in clear, grammatical, correctly-spelled language
We've found by experience that people who are careless and sloppy writers are usually also careless and sloppy at thinking and coding (often enough to bet on, anyway). Answering questions for careless and sloppy thinkers is not rewarding; we'd rather spend our time elsewhere.
So expressing your question clearly and well is important. If you can't be bothered to do that, we can't be bothered to pay attention. Spend the extra effort to polish your language. It doesn't have to be stiff or formal ? in fact, hacker culture values informal, slangy and humorous language used with precision. But it has to be precise; there has to be some indication that you're thinking and paying attention.
Spell, punctuate, and capitalize correctly. Don't confuse "its" with "it's", "loose" with "lose", or "discrete" with "discreet". Don't TYPE IN ALL CAPS; this is read as shouting and considered rude. (All-smalls is only slightly less annoying, as it's difficult to read. Alan Cox can get away with it, but you can't.)
More generally, if you write like a semi-literate b o o b you will very likely be ignored. So don't use instant-messaging shortcuts. Spelling "you" as "u" makes you look like a semi-literate b o o b to save two entire keystrokes.

How to create multiple segments on the target structure of an IDOC

Hi All
I am working on the Shipment Confirmation Interface( Message Type SHPCON ) which is FILE to IDOC Scenario. I have a segment called E1EDL18 which occurs only once on the target side of the idoc. Now I have to created multiple E1EDl18 segments for the Qualifiers ORI, PGI and PCK. I treid to send a constant ORI,PGI,PCK and then used an user defined function which splits the constant at COMMA and then I am assigning to the target field QUALF. In the display queue for QUALF I see three values with context but still only one E1EDL!* segment is created. Please let me know how to create multiple E1EDl18 segments for three qualifiers.
Thanks
Naga

In message Mapping, just right click on the segment and click on duplicate subtree. now it will create you another segment with same name and fields in it..
you can hard code the Qual, or you can map the required source field into it.

How to create function module in abap for VirtualProvider in bi

how to create function module in abap for VirtualProvider in bi ???????????????
can any one help me with simple example ?????????????????
Moderator message : Duplicate post locked. Read forum rules before posting.
Edited by: Vinod Kumar on Jun 15, 2011 4:40 PM

Hi ,
Thanks for replies about my question??.
If i am using the exit in my char relation ship how can i debugg that exit???
if i am using BPS0 how to do it???If i am using BPS_WB how to do it??
Case1.Variable (type Exit) I known how to do debugg this one in BPS0 but i'm not sure in BPS_WB??
Case2:Char Relation Ship(Type Exit) how to do in BPS0 and BPS_WB??.
Thanks.

How to create multiple selection screens in reports

How to create multiple selection screens in reports
Thanks,
Sridhar

Ex: hope you will find an idea from the below example :
SELECTION-SCREEN BEGIN OF BLOCK SEL1 WITH FRAME TITLE TIT1.
PARAMETERS: CITYFR LIKE SPFLI-CITYFORM,
            CITYTO LIKE SPFLI-CITYFORM.
SELECTION-SCREEN end OF BLOCK SEL1
SELECTION-SCREEN BEGIN OF SCREEN 500 AS WINDOW.
SELECTION-SCREEN INCLUDE BLOCKS SEL1.
SELECTION-SCREEN BEGIN OF BLOCK SEL2 WITH FRAME TITLE TIT2 .
PARAMETERS: AIRPFFR LIKE SPFLI-AIRPFROM,
            AIRPTO LIKE SPFLI-AIRPTO.
SELECTION-SCREEN END OF BLOCK SEL2
SELECTION-SCREEN END OF SCREEN 5000.
INITIALIZATION.
TIT1 = 'ITIES'.
aT SELECTION-SCREEN.
CASE SY-DYNNR.
WHEN '0500'.
   MESSAGE W159(at) WITH 'SCREEN 500'.
WHEN '1000'.
   MESSAGE W159(at) WITH 'SCREEN 1000'.
ENDCASE.
START-OF-SELECTION.
TIT1 = 'CITIES FOR AIRPORTS'.
TIT2 = 'AIRPORTS'.
CALL SELECTION-SCREEN 500 STARTING AT 10 10.
TIT1 = 'CITIES AGAIN'.
CALL SELECTION-SCREEN 1000 STARTING AT 10 10.

How to create Dialog Module[Screen,Menu,object navigator]

Dear All,
kindly give me. How to create Dialog Module[Object Navigator,Screen,Menu,] steps with code.

please see this link it is with screen shot from the scrach ...
<b>creating struture
creating screen
writing logic
table control
creating tcode</b> ...etc
<a href="http://">http://www.sapdevelopment.co.uk/dialog/tabcontrol/tc_basic.htm</a>
reward points if it is usefull ...
Girish

How to create multiple Idocs in SAP R3 ?

I have been asked question on Idocs from MNC company.
How to create multiple idocs in R3 ? Please let me know.

hi ,
if you want to create in multiple IDOCS in XI , take XSD of IDOC and chnage the occurance to 1 to UNBOUNDED, you can genarate multiple IDOCS.
Regards,
Raj

How to create multiple modules in quizzes in single file?

Similar Messages

Maybe you are looking for