How to create multiple nodes for a feature in PE03

Hi Specialists,
I have a requirement for australia where we need to maintain multiple nodes in a feature ( Tcode : PE03).
Action Type      Action Reason
L6                      00
                          01
L7                      06
                          08
L2                      01
Issue is : 1) How can we maintian the above values in a feature tree.
                2) The SAP standard structure is using PME14 but PME14 does not contain the 2 above mentioned
                     fields i.e.( Action Type & Action Reason). Istead it is contained in structure PME04 .
                    SO how can we modify the SAP standard structure.
                3) The above strucure PME14 is being read in an SAP standard report RPCPSPQ0 :
                     i.e Payment Summary Report tcode: PC00_M13_PSGEN . If we want to accomodate the new requirement for        australia does that mean we need to modify SAP standard report / or is there a user exit/BADI available to avoid making changes to SAP standard report.
Please suggest.

Can you please supply the name of the Feature you are trying to use? it will help to understand the full picture.

Similar Messages

How to create multiple nodes for single activity in workflow.

Hi Gurus,
I am developing the PR workflow. and in that I want to create 2 different nodes for signle activity.
how can I create those multiple outcomes for signel activity in workflow.
Thanks in Advcance.
Vinod

Hi ,
You can use Outcomes tab in your workflow step...
What is the step... is it related to release...
what is that you want to do...
Regards
Gautam

How to create one node for multiple cards?

I want a single minor device node to act as the interface to all instances of my pci-cards.
I have the same pci-cards(pcixxx, xxx).

You may want to create minor nodes on the fly
using cloning or makedevice() interface.
WDD has an example on it in xx_open() section,
I believe
Regards,
Cyril
I want a single minor device node to act as the
interface to all instances of my pci-cards.
I have the same pci-cards(pcixxx, xxx).

How to create multiple function for each value

Hi, I'm new to LabVIEW.
I need some help. Attached is my LabVIEW file.
I want to change the Formula VI for the 'Air Velocity vs Time' waveform to another formula (or multiple formula (can I use MathNode Script for this?)) to let it handle multiple values from the data and then display the result on the waveform graph. Or how can I do this?
Another one is how to change the scale for the 'Measurement Flow' from sensor to pressure? Using pressure sensor 0V-10V to -500Pa-500Pa.
Thanks in advance.
Attachments:
Exhaust EBT Wind Tunnel 1.1.vi ‏399 KB

Faruq wrote:
I want to change the Formula VI for the 'Air Velocity vs Time' waveform to another formula (or multiple formula (can I use MathNode Script for this?)) to let it handle multiple values from the data and then display the result on the waveform graph. Or how can I do this?
You could simply use a case structure around the Formula Express VI. When you say MathNode Script I'm assuming you're referring to MathScript? Or are you referring to the Formula Node. With either one you'd need to convert from dynamic data to arrays. With MathScrip you need to be aware that starting with LabVIEW 2009 MathScript requires a separate license.
Another one is how to change the scale for the 'Measurement Flow' from sensor to pressure? Using pressure sensor 0V-10V to -500Pa-500Pa.
You can create a custom scale for your measurement. You can do this in the DAQ Assistant.
Attachments:
DAQ_assistant.png ‏30 KB

How to create Multiple Address for a single customer

Respected Members,
In tcode Xd01 we create on customer but there we can maintain only one address but sometimes a scenario can be that single customer can have different address .
How to do that.Any exit is available to create multiple address with creation of single customer.
This provision is given while creating a Business Partner.Tcode is BP .In this Address Overview tab is there and you maintain multiple address to single Busines partner.
Same thing can we do for the customer.
Any solutions or suggestions,please give me your support.
Thanks

Hello Manish,
Unfortunately Customers have only one address. However you can use contact persons to store different addresses, or (in the Sales view) you can assign other partner functions with different addresses (e.g. one customer acting as the Sold-to partner may have different Ship-to partners).
If these options do not meet your requirements, you could extend the customer master data with your own functionality and enhance transaction XD01 with your own screens for holding alternate addresses.
Regards,
John.

How to create one node for multiple instances of hardware

I want a single minor device node to act as the interface to all instances of my hardware, in this case a co-processor chip on the PCI bus. For the number of chips found at boot time, I want requests to be dispatched, one per chip, in a round-robin. Is this possible?
I suppose one approach to solving the problem could be to set a static flag in the xxattach function (accessible to xxattach only). In xxattach the flag is set after creating the first and only node and a list of the chips is built on subsequent calls to xxattach. Xxioctl calls would have the same minor number, which could be ignored, and the command dispatched to the next chip in the list. A single node solution is preferable to a driver modification.
Thanks

I think you're going about this backwards.
Make the driver be a "normal" driver, with one instance per chip.
Then make a user-space demon that round-robins requests between available hardware.
Or have a second pseudo-driver handle arbitration.
Either way, dont try to shoe-horn the driver framework from another OS, onto solaris. That's what I presume you meant by "A single node solution is preferable to a driver modification."

How to create new node in feature

Dear Members,
Culd any one help me out .........
How to create new node in features..
Example: NUMKR
On defaulting which option to select to create new node?
Return value
field for decision operation
sub feature
programme
debugging operation
error operation
comment
How to proceed................????????????

hi,
Where you can select the option field for decision operation then select the filed which you want like personal area, subarea, employee group and subgroup.
and then select the node and then goto create and assign the return value by selecting the option ' Return value'.
NUMKR -> FILED - PERSKGemployee group) -> field PERSK(employee sub group) and --> return value.
thanks,
Vasu.

How to create a node with attributes at runtime in webdynpro for ABAP?

Hi Experts,
         How to create a node with attributes at runtime in webdynpro for ABAP? What classes or interfaces I should use? Please provide some sample code.
I have checked IF_WD_CONTEXT_NODE_INFO and there is ADD_NEW_CHILD_NODE method. But this is not creating any node. I this this creates only a "node info" object.
I even check IF_WD_CONTEXT_NODE but i could not find any method that creates a node with attribute.
Please help!
Thanks
Gopal

Hi
   I am getting the following error while creating a dynamic context node with 2 attributes. Please help me resolve this problem.
Note
The following error text was processed in the system PET : Line types of an internal table and a work area not compatible.
The error occurred on the application server FMSAP995_PET_02 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: IF_WD_CONTEXT_NODE~GET_STATIC_ATTRIBUTES_TABLE of program CL_WDR_CONTEXT_NODE_VAL=======CP
Method: GET_REF_TO_TABLE of program CL_SALV_WD_DATA_TABLE=========CP
Method: EXECUTE of program CL_SALV_WD_SERVICE_MANAGER====CP
Method: APPLY_SERVICES of program CL_SALV_BS_RESULT_DATA_TABLE==CP
Method: REFRESH of program CL_SALV_BS_RESULT_DATA_TABLE==CP
Method: IF_SALV_WD_COMP_TABLE_DATA~MAP_FROM_SOURCE_DATA of program CL_SALV_WD_C_TABLE_V_TABLE====CP
Method: IF_SALV_WD_COMP_TABLE_DATA~MAP_FROM_SOURCE of program CL_SALV_WD_C_TABLE_V_TABLE====CP
Method: IF_SALV_WD_COMP_TABLE_DATA~UPDATE of program CL_SALV_WD_C_TABLE_V_TABLE====CP
Method: IF_SALV_WD_VIEW~MODIFY of program CL_SALV_WD_C_TABLE_V_TABLE====CP
Method: IF_SALV_WD_COMPONENT~VIEW_MODIFY of program CL_SALV_WD_A_COMPONENT========CP
My code is like the following:
TYPES: BEGIN OF t_type,
            CARRID TYPE sflight-carrid,
            CONNID TYPE sflight-connid,
         END OF t_type.
Data: i_struc type table of t_type,
dyn_node   type ref to if_wd_context_node,
rootnode_info   type ref to if_wd_context_node_info,
i_node_att type wdr_context_attr_info_map,
wa_node_att type line of wdr_context_attr_info_map.
      wa_node_att-name = 'CARRID'.
      wa_node_att-TYPE_NAME = 'SFLIGHT-CARRID'.
      insert wa_node_att into table i_node_att.
      wa_node_att-name = 'CONNID'.
      wa_node_att-TYPE_NAME = 'SFLIGHT-CONNID'.
      insert wa_node_att into table i_node_att.
clear i_struc. refresh i_struc.
select carrid connid into corresponding fields of table i_struc from sflight where carrid = 'AA'.
rootnode_info = wd_context->get_node_info( ).
rootnode_info->add_new_child_node( name = 'DYNFLIGHT'
                                   attributes = i_node_att
                                   is_multiple = abap_true ).
dyn_node = wd_context->get_child_node( 'DYNFLIGHT' ).
dyn_node->bind_table( i_struc ).
l_ref_interfacecontroller->set_data( dyn_node ).
I am trying to create a new node. That is
CONTEXT
- DYNFLIGHT
CARRID
CONNID
As you see above I am trying to create 'DYNFLIGHT' along with the 2 attributes which are inside this node. The structure of the node that is, no.of attributes may vary based on some condition. Thats why I am trying to create a node dynamically.
Also I cannot define the structure in the ABAP dictionary because it changes based on condition
Message was edited by: gopalkrishna baliga

How to create one TO for multiple TRs

Dear All,
how to create one TO for multiple TRs, kindly suggest me
Regards,
balu

As for your question: it is discussed in sAP online help:
http://help.sap.com/saphelp_erp60_sp/helpdata/en/c6/f841f24afa11d182b90000e829fbfe/frameset.htm
Sorry I misunderstood your question.
The above mentioned solution won't create one single TO from multiple TR.
Edited by: Csaba Szommer on Aug 11, 2010 9:46 AM

How to create Import format for building version Hirerarchy and Node

Hi
i Want to know how to create Import format for building version Hirerarchy and Nodes.Can anyone show me with example or format for version Hierarchy with few nodes for the hierarchy
i Want to Build   this   1. Version1 (Version)
                                 2.Account (Hirerarchy)
                                 3. Balancesheet (Limb)
                                 4. Assets (Limb)
                                 5. Cash (Leaf)
Thanks,

Please follow the DRM User Guide,
http://docs.oracle.com/cd/E17236_01/epm.1112/drm_user.pdf
Below is my preferred approach, by selecting only relation and Hierarchy sections,
The relation section contains the Node Name and Parent Name ( you can include any other properties, but as a best practice keep the Parent Node as the last column).
The Hierarchy ( Hier ) section contains the Hierarchy Name, Top Node and Hierarchy description
Follow the Import steps and provide a Name for the version.
++++++++++++++++++++++++++++++++
[relation]
AC_BalanceSheet AC_Account
AC_Asset AC_Account
AC_Cash AC_Account
[hier]
Account AC_Account AccountHier
++++++++++++++++++++++
Note: Please delete all the special characters (TAB) created at the end of [relation] and [hier] sections while you copy the content from an Excel sheet to a Notepad.

How to create multiple physical channels using DAQmx?

Hi, I am new to Labview.
Can anyone please help me on how to create multiple physical channels? I am following the LabVIEW examples in the NI example finder but they are only for acquiring signals from one channel.
Actually, I am using the channels of an SCXI 1520 to measure voltage signals. And one more thing, in the NI Example Finder, they are sample codes there for setting the filter in SCXI 114x.
Will this example work with an SCXI 1520, too?
Thanks!

There are many ways to read multiple channels in LabVIEW. First, if you look at that example that lets you set the filter setting on the 114x and you click on the 'Physical Channel Listbox' then click 'Browse' you can see that you can select multiple channels. After you select the channels and hit 'Ok' it will build a multiple channel string. This is one way to read multiple channels.
Next, you can create a 'Task' in Measurement and Automation Explorer(MAX). When you create this task select all the channels that you need to read then back in LabVIEW simply select a 'DAQmx Task Name Constant' Select the task you just created and wire that to an Input of your first DAQ VI. If you do this you do not need to have a 'DAQmx Create Physical Channel' VI or create
Task because it is already created in MAX.
When looking at example VIs you can tell if a multi-channel read is acceptable by looking at the 'DAQmx Read' and if it says NChan that means it will do a multichannel read. There are tons of example programs that will display the multichannel read capabilities.
This example may not work for the 1520 because the properties that are set could possibly be specific to the 142x. When using the 1520 though it is very likely that the properties will be very similar if not exact. You will simply put a DAQmx Channel property node on your block diagram and then look for the Lowpass filter settings properties that will most likely be in the same location. Now another way todo this without using a property node would be in MAX when you create a task set the filter settings from the Device tab in the task configure window.
Let me know if you need anymore help with reguards to this issue! Have a great day!
Allan S.
National Instrument
s
Applications Engineering

How to create one checksum for 264 vis

Hi,
How to create "one Checksum" for 264 Vis.These 264 Vis are Interlinked if i change code for any .vi the checksum Should be update.This checksum is shown on the main window.
Regards
Ravindranath
Solved!
Go to Solution.

Here's a slightly simplified version (saved in 8.6). There's no need for the Get/Set File Position. The file position is already being incremented with the read.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
Attachments:
Multiple File MD5 Checksum (Version 8.6).vi ‏23 KB

How to create multiple instance on same database

Hi ,
I would like to know how to create multiple instance on same database . I know that some people use database configuration assistant to do this but i could not figure out how they did it.
Any how if some one can help me with this and can give me links of this it would be great help for me.
Thank you for reading my problem and helping me !
Amil
please if possible mail me on [email protected]

How to create multiple instance?????Do you mean multiple instances on the same database, or multiple databases on the same machine ?
I m new to this field....
Willin to learn a lot about oracle....Then it wouldn't be bad reading a bit of Database Concepts

How to create a substitute for requester in SRM 7.0

Hi,
do you know how to create a substitute for requester?
we have groups of 2 people and we want that they can see and edit shopping carts one of each other. Do you know how is it possible? it will be necessary for all SCs.
Thanks.
Regards,
Nelson

You can use the "Team Cart" feature introduced in SRM 7 for your requirement.
Take a look at this wiki page for more information http://wiki.sdn.sap.com/wiki/display/SRM/Team+purchasing
Edited by: Jay Yang on Mar 31, 2011 10:47 AM

How to create a node in an interface in SFP transaction

Dear All
I am designing an Adobe forms template for which I am creating an interface.
To pass the values I need to create a main node which contains both subnodes and attributes.
How can we create a node for an interface?
Just to add, this node will get its data at run time from an ABAP web dynpro component. this component will get the data after executing some function modules.
Regards
Vineet Vkram

Hi Vineet,
There is no way to create a node in the interface. But DDIC type interface can be created with similar structure to the node in the ABAP Web Dynpro Component.
Ranganathan.

How to create multiple nodes for a feature in PE03

Similar Messages

Maybe you are looking for