How to create multiple sip trunks between cucm and cisco unified sip proxy

Dear Expert,
Is there a way to create multiple sip trunks between CUCM and Cisco Unified SIP Proxy (CUSP)? How to achieve it without creating multiple IP interfaces on the CUSP module.
CUCM: 8.5.1.10000-9
CUSP: 8.5.2
Thank you,
.wan

Hello Michael,
This SIP trunk is part of UCCE solution, which used between CVP, CUSP, and CUCM.
The requirements:
1) To have different codecs for different type of calls, as the phones are at few countries
2) To pass different number of digits from CUSP to CUCM for different call treatments
.wan

Similar Messages

Problem with sip trunk between CCM and Huawei through Cisco ASA5520

Hello,
I have a next problem
During SIP conversation ASA is changing the ip address of CCM to corresponding name in ASA configuration inside the SIP packet:
To: <sip:443230282@Server_CCM1;user=phone>
ASA name configuration:
name x.y.z.h Server_CCM1
But it should be without any changes like that: To: <sip:[email protected];user=phone>. Because of that session cant be established. Remote SIP peer gives an error "Bad Request - 'Malformed/Missing URL"
When name was deleted in ASA "no name x.y.z.h Server_CCM1" we have no any problem with SIP initialization and call proccesing.
We are going to upgrade ASA from 8.2 to 8.3 and it seems that we will have the same problem because object will be created automaticly in new version (we are using a NAT) and we will not be able to delete an object like we did in version 8.2.
What configuration in ASA version 8.3 should be done to avoid this issue.
P.S Detailed debug from Huawei in attachment.
Thank you.

Hi.
depending on your config, you might be hitting CSCta16361, this is fixed in 8.2(4)
if you can confirm it's still happening in latest 8.2 release, then a TAC case needs to be opened so investigation is done and a new bug is opened.
if you've tested 8.2(4) already and it's still doing the same, then a TAC Service Request should be opened for more investigation and possibly opening a new defect.
Best regards,
Fadi.
does this answer your question? if yes please mark it resolved.

How to create a wifi network between Mac and iPhone

Hi there,
I have just wired Internet at my house, and i would like to create a network with the wifi of the mac, to connect my iPhone to the Internet.
Is that possible?
i have tried to do, I've created a network, encrypted it, the iPhone recognize it, but when i try to use safari, the following message appears.
"safari can`t open the page because it can't find the server"
So, is that possible and i am doing something wrong, or it isn't possible?
thx in advantage
Marcelo França
Brazil

This is a possibility. But please be aware using your Mac to emit a WiFi connection is a temporary solution. And it will get a short range unlike an actual WiFi Router. Also you may find it to be unstable at times. The Airport Card in your Mac was not designed to be a full time Router WiFi emitter. But more of a receiver to get the signal and use it for personal use.
1. Unlock the network on your Mac make it an open network
2. Go to your iPhone, Settings-Wireless-Tap on blue circle next to network name, Choose Forget network
3. Now go back, It will rescan and find an open network, Connect, and see if Safari works
If Safari works, Then you had a Security issue. Try using WEP 128 bit 13 character passkey or WEP 8 Character Passkey.
Cheers and best of luck
Message was edited by: Andrew T.

CUCM - trunking between 7 and 9

Hi,
Document needed to do a trunking between cucm 7 and cucm 9 ( intercluster trunking)
We are planning to route a PSTN call from IP phones which are registerd with old CUCM on version 7 from our new cucm 9 which has FXO- line active.
how do I achive it.
Regards

Hello
You have to use intercluster non-gatekeeper controlled . I do nothink there is special document for this , but you can see the below link:-
https://supportforums.cisco.com/discussion/11766291/intercluster-sip-trunk-between-cucm-version-71-and-91
Thanks
please rate all useful ifnromation

Third Party Phone over SIP Trunk with CUCM 9.x

Hi all,
I have a problem where my Third Party SIP phones wont go over the SIP trunk configured in my CUCM 9.x cluster. My Cisco phones work fine and goes out the trunk. I have noticed a distinct difference in wireshark with the invite packets from Third Party SIP phones and the Cisco ones.
I have configured the SIP trunk in CUCM with the following route pattern (60.!#)and configured it with associated group and list. Heres the differense between the invite packets from Cisco and Third Party phones.
Cisco Phone: INVITE sip.60xxxx%23@ipadress
Third Party SIP Phone: INVITE sip:[email protected]
It seems the Cisco phones gets some extra configured the Third Party ones dont...
Thanks in advance for any help.
//Per

Thanks for the answer
Yeah i have DNS configured and i have the trunk pointed to a domain destination SRV record and like i said it works fine when calling from a Cisco phone. I tried changing the domain to an ip address but same result. I also changed the Plycom phone from being registered towards the domain of CUCM to an IP adress of CUCM and then the SIP INVITE messages in wireshark began to look kinda the same expet for the "%23" section but it still dont work.
When i look at the Real Time Data in RTMT the orig and final called from the cisco phone has stripped the 60 and forwared the rest of the number towards the correct domain for the SIP trunk.
When looking at the data from the Polycom phone the orig and final called data still contains the 60 prefix part and the called device name field is empty. The termination Cause Code is that the number requested is Unallocated/Unassigned..
In other words something is missing to get CUCM to strip 60 from the Polycom phones dialed number and send it towards the SIP trunk like it does when the Cisco phones call it.
Unfortunatley i dont have the meens to attach the trace...
Thanks again for any help/advice
With regards, Per.

Sip trunk between CUCM7.0 and third party VOIP provider

Hi all,
I'm looking for a solution/howto configuration for setting up a SIP trunk between CUCM7.0 and a SIP-VoIP provider.
Got SIP username, password and SIP-proxy IP from the provider.
I've done such a setup on CUCME a couple of times, but never on the CUCM.
Who can put me on right way?
Can it be done on the CUCM, or must an IOS-Device be used (got a PSTN-GW connected through H323 with CUCM)?
THanks for the hint,
Greets Norbert

Here we go.....
CONFIG (Version=7.1)
=====================
Version 7.1
Cisco Unified Communications Manager Express
! Calling nr. incoming
voice translation-rule 40
rule 1 /\(.*\)/ /0\1/
! Discard prefix (calling nr.)
voice translation-rule 190
rule 1 /^0\(.*\)/ /\1/
rule 2 /^9\(.*\)/ /\1/
! Mapping, internat to external nr.
voice translation-rule 191
rule 10 /^[1-9].*/ /xxxxEXTERNALxxxx/
! for call-forwarding
rule 15 /^0\(.*\)/ /\1/
! Mapping external to internal nr.
voice translation-rule 192
rule 2 /^xxxxxEXTERNALxxxx/ /4xx/
voice translation-profile TP_IN_SIP
translate calling 40
translate called 192
voice translation-profile TP_OUT_SIP
translate calling 191
translate called 190
dial-peer voice 2001 voip
corlist outgoing dialCORnoFax
description *** SIP-TRUNK (OUT) ***
translation-profile incoming TP_IN_SIP
translation-profile outgoing TP_OUT_SIP
max-conn 2
destination-pattern 9.T
session protocol sipv2
session target ipv4:2xx.xxx.xxx.xxx
session transport udp
! customer external nr. range (one dot at the and -> 0-9)
incoming called-number xxxxxxxx.
dtmf-relay rtp-nte
codec g711alaw
no vad
gateway
timer receive-rtp 1200
sip-ua
keepalive target ipv4:2xx.xxx.xxx.xxx
authentication username xxEXTERNAL NR.xxxxx password 7 111111111111111111111
calling-info pstn-to-sip from number set xxEXTERNAL NR.xxxxx
retry invite 2
retry response 2
retry bye 2
retry register 2
retry options 1
registrar ipv4:2xx.xxx.xxx.xxx expires 60
host-registrar
Greets,
Norbert
Hope this help......Please rate if helpful

SIP trunking between Microsoft OCS server and Cisco Voice GW router.

Hello All,
I have a client with an existing Microsoft OCS (office communications server) environment with the OCS server in their head office. The OCS clients in the remote Office registers with the OCS server in the head office. The WAN connectivity between the remote office and the Head office is MPLS.I would like to facilitate local call (PSTN) features at the remote site through a newly proposed Voice gateway router.
Can I achieve this by doing a SIP trunk between the OCS server in the head office to the newly proposed voice GW router in the remote office through the existing MPLS link. If yes, Could any one please assist me in this regards or suggest any other best solution to achieve the same.
Thank you in advance,
Mohammed Ameen R

Hi David,
this is a normal behaviour. To CUCM, OCS is a remote destination (just like your mobile phone). When your mobile phone hangs up, the system will put the call on hold for 10 sec.
This is there for the mobile user to go to his desk to pick up the call and continue the conversation (part of single number reach feature)
The best practise will be for the user to ensure that the other party hangs up the call first before he hang up.
Please grade if you think it's useful =)

How to create multiple instance on same database

Hi ,
I would like to know how to create multiple instance on same database . I know that some people use database configuration assistant to do this but i could not figure out how they did it.
Any how if some one can help me with this and can give me links of this it would be great help for me.
Thank you for reading my problem and helping me !
Amil
please if possible mail me on [email protected]

How to create multiple instance?????Do you mean multiple instances on the same database, or multiple databases on the same machine ?
I m new to this field....
Willin to learn a lot about oracle....Then it wouldn't be bad reading a bit of Database Concepts

How to create multiple Tree Type Region In Tabular Form ?

Dear Friends,
i have to design tabular form to Distribute User Rioght to emp to access application
eg if i have Three module in application
1.Administration
2.Attendance
3.Accounts
Module
1 Administration have 5 Pages A,B,C,D,E.
Module
2 Attendance HAVE 4 Pages F,G,H,I
Module
3 Accounts HAVE 7 Pages J,K,L,M,N,O,P
I need these three module divided into three section in tabular form as a tree Type like
Module 1 Tree Open in Tabular Form like
- (Tree Mark Open )
=======================================================
PAGE_ID-------------SUBPAGE_ID-------VIEW-------------------MODIFY-------------------CREATE----------------------------TABLE COLUMN NAME
========================================================
Administration-----------A------------------CHECK bOX------------CHECK BOX-------------CHECK BOX
Administration-----------B------------------CHECK bOX------------CHECK BOX-------------CHECK BOX
Administration-----------C------------------CHECK bOX------------CHECK BOX-------------CHECK BOX
Administration-----------D------------------CHECK bOX------------CHECK BOX-------------CHECK BOX
Administration-----------E------------------CHECK bOX------------CHECK BOX-------------CHECK BOX
- (Tree Mark Open )
Module 2 Tree Open in Tabular Form like
Attendance-----------F------------------CHECK bOX------------CHECK BOX-------------CHECK BOX
Attendance-----------G------------------CHECK bOX------------CHECK BOX-------------CHECK BOX
Attendance-----------H------------------CHECK bOX------------CHECK BOX-------------CHECK BOX
Attendance-----------I------------------CHECK bOX------------CHECK BOX-------------CHECK BOX
- (Tree Mark Open )
Module 3 Tree Open in Tabular Form like
Accounts-------------J------------------CHECK bOX------------CHECK BOX-------------CHECK BOX
Accounts-------------K------------------CHECK bOX------------CHECK BOX-------------CHECK BOX
Accounts-------------L------------------CHECK bOX------------CHECK BOX-------------CHECK BOX
Accounts-------------M------------------CHECK bOX------------CHECK BOX-------------CHECK BOX
Accounts-------------N------------------CHECK bOX------------CHECK BOX-------------CHECK BOX
Accounts-------------O------------------CHECK bOX------------CHECK BOX-------------CHECK BOX
Accounts-------------P------------------CHECK bOX------------CHECK BOX-------------CHECK BOXi need divided these three Module in Tabular form in three region as tree.
Table APPLICATION_PAGE_DETAILS
ID                   NUMBER
PAGE_ID             NUMBER
SUB_PAGE_ID          NUMBER
========================
TABLE USER_RIGHT
======================
ID                  NUMBER
EMP_ID            NUMBER
PAGE_ID            NUMBER
SUB_PAGE_ID        NUMBER
VIEW                    VARCHAR2(1)
MODIFY                VARCHAR2(1)
CREATE                VARCHAR2(1)How to create multiple Tree Type Region In Tabular Form ?
How can i do this ?
Thanks
Edited by: Vedant on Oct 4, 2011 3:21 AM
Edited by: Vedant on Oct 4, 2011 9:09 PM
Edited by: Vedant on Oct 13, 2011 8:57 PM

Well think of it I believe the scenario is too bird viewed hence the solution can't be exact.
But thinking of a possible solution every time a child operation fails have a catch block where you you go back to system if the parent needs to be deleted if yes, call Delete Method on the parent.
Note: Make sure that the decision on whether or not the parent record needs to be deleted will depends on the question "Does Parent Record already has several other children associated to it or not"
Hope this clarifies.
Regards,
Messer

How to create multiple pages in the output file?

hi, we have an application (C++) that generates PDF output. I've been asked to figure out how to create multiple copies of each page (uncollated). i.e. the output would be 4 copies of p 1 followed by 4 copies of p 2, etc. I'd like to do this without actually replicating each page if possible ... any ideas?

Why not just put four copies of the same CosObj reference into the Pages array/tree?

How to create multiple toolbar buttons in jsp ?

hi all,
how to create multiple toolbar buttons in jsp ?
plz help me

mgmt
plzhttp://www.catb.org/~esr/faqs/smart-questions.html#writewell
How To Ask Questions The Smart Way
Eric Steven Raymond
Rick Moen
Write in clear, grammatical, correctly-spelled language
We've found by experience that people who are careless and sloppy writers are usually also careless and sloppy at thinking and coding (often enough to bet on, anyway). Answering questions for careless and sloppy thinkers is not rewarding; we'd rather spend our time elsewhere.
So expressing your question clearly and well is important. If you can't be bothered to do that, we can't be bothered to pay attention. Spend the extra effort to polish your language. It doesn't have to be stiff or formal ? in fact, hacker culture values informal, slangy and humorous language used with precision. But it has to be precise; there has to be some indication that you're thinking and paying attention.
Spell, punctuate, and capitalize correctly. Don't confuse "its" with "it's", "loose" with "lose", or "discrete" with "discreet". Don't TYPE IN ALL CAPS; this is read as shouting and considered rude. (All-smalls is only slightly less annoying, as it's difficult to read. Alan Cox can get away with it, but you can't.)
More generally, if you write like a semi-literate b o o b you will very likely be ignored. So don't use instant-messaging shortcuts. Spelling "you" as "u" makes you look like a semi-literate b o o b to save two entire keystrokes.

How to create multiple segments on the target structure of an IDOC

Hi All
I am working on the Shipment Confirmation Interface( Message Type SHPCON ) which is FILE to IDOC Scenario. I have a segment called E1EDL18 which occurs only once on the target side of the idoc. Now I have to created multiple E1EDl18 segments for the Qualifiers ORI, PGI and PCK. I treid to send a constant ORI,PGI,PCK and then used an user defined function which splits the constant at COMMA and then I am assigning to the target field QUALF. In the display queue for QUALF I see three values with context but still only one E1EDL!* segment is created. Please let me know how to create multiple E1EDl18 segments for three qualifiers.
Thanks
Naga

In message Mapping, just right click on the segment and click on duplicate subtree. now it will create you another segment with same name and fields in it..
you can hard code the Qual, or you can map the required source field into it.

How to create multiple selection screens in reports

How to create multiple selection screens in reports
Thanks,
Sridhar

Ex: hope you will find an idea from the below example :
SELECTION-SCREEN BEGIN OF BLOCK SEL1 WITH FRAME TITLE TIT1.
PARAMETERS: CITYFR LIKE SPFLI-CITYFORM,
            CITYTO LIKE SPFLI-CITYFORM.
SELECTION-SCREEN end OF BLOCK SEL1
SELECTION-SCREEN BEGIN OF SCREEN 500 AS WINDOW.
SELECTION-SCREEN INCLUDE BLOCKS SEL1.
SELECTION-SCREEN BEGIN OF BLOCK SEL2 WITH FRAME TITLE TIT2 .
PARAMETERS: AIRPFFR LIKE SPFLI-AIRPFROM,
            AIRPTO LIKE SPFLI-AIRPTO.
SELECTION-SCREEN END OF BLOCK SEL2
SELECTION-SCREEN END OF SCREEN 5000.
INITIALIZATION.
TIT1 = 'ITIES'.
aT SELECTION-SCREEN.
CASE SY-DYNNR.
WHEN '0500'.
   MESSAGE W159(at) WITH 'SCREEN 500'.
WHEN '1000'.
   MESSAGE W159(at) WITH 'SCREEN 1000'.
ENDCASE.
START-OF-SELECTION.
TIT1 = 'CITIES FOR AIRPORTS'.
TIT2 = 'AIRPORTS'.
CALL SELECTION-SCREEN 500 STARTING AT 10 10.
TIT1 = 'CITIES AGAIN'.
CALL SELECTION-SCREEN 1000 STARTING AT 10 10.

How to create multiple Idocs in SAP R3 ?

I have been asked question on Idocs from MNC company.
How to create multiple idocs in R3 ? Please let me know.

hi ,
if you want to create in multiple IDOCS in XI , take XSD of IDOC and chnage the occurance to 1 to UNBOUNDED, you can genarate multiple IDOCS.
Regards,
Raj

[How-to] Create multiple Artboards in existing document?

Herro,
I'm wondering how to create multiple artboards at once in an existing document. I can manually re-arrange them later, that's fine. But I often find myself needing to create 20+ artboards for some of my complex projects.
Currently, adding those 20+ artboards manually is a pain as you can imagine.
Help?
Cheers.

open the Artboards panel. (Window->Artboards)
then down the bottom start clacking away at the new artboard button.

How to create multiple sip trunks between cucm and cisco unified sip proxy

Similar Messages

Maybe you are looking for