How to create multiple tabs of report in 1 crystal report file

Hi,
Is there any feature in Crystal report 2008 on creating multiple tabs of report similar to Web-I?
If there is, could you give me help on this.
Thank you in advance.
Rose

Hi Rose,
I think we cant achive the same functionality in Crystal Report designer.
Regards,
Shweta

Similar Messages

  • How to create a clickable Table of contents using Crystal Reports 8.5

    How to create a clickable Table of contents using Crystal Reports 8.5. I was able to create the table of contents using subreport and temporary table. but not able to link to the pages.
    how to make it clickable ?
    -Vivek

    Hi Vivek,
    To you may create on demand sub report.
    In main report only the link will be shown when you click on the link the sub report will be opened in a new tab.
    It can be placed in a Group header and to show the data for that particular group only.
    Click on the Help menu in the crystal Reports Designer and open the Crystal Reports Help
    Go to Index tab and type in subreport
    Select Creating On demand you will get lot of information on that.
    Please let us know if that is enough to solve your problem
    Regards,
    Aditya Joshi

  • How to create stored procedures and use those in Crystal reports

    Hi All,
    Can anyone explain me how to create a stored procedure and use that stored procedure in Crystal reports. As I have few doubts in this process, It would be great if you can explain me with a small stored proc example.
    Thanks in advance.

    Hello,
    There is a document explainining how to use Oracle stored proc with Crystal reports.
    Check at:
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/1084c536-711e-2b10-e48a-924a60745253
    It is for older version but it should work and you can refer to it to get general idea how to start with it. It has a sample oracle stored proc and how to connect it from Crystal Reports.

  • Is It Possible to create multiple tab report in OBIEE 11g?

    Is It Possible to create multiple tab report in OBIEE 11g?

    Triple post even! Multiple tabs in a single OBIEE  &  https://forums.oracle.com/thread/2560266
    Stick to one post!

  • How to create multiple selection screens in reports

    How to create multiple selection screens in reports
    Thanks,
    Sridhar

    Ex: hope you will find an idea from the below example :
    SELECTION-SCREEN BEGIN OF BLOCK SEL1 WITH FRAME TITLE TIT1.
    PARAMETERS: CITYFR LIKE SPFLI-CITYFORM,
                CITYTO LIKE SPFLI-CITYFORM.
    SELECTION-SCREEN end OF BLOCK SEL1
    SELECTION-SCREEN BEGIN OF SCREEN 500 AS WINDOW.
    SELECTION-SCREEN INCLUDE BLOCKS SEL1.
    SELECTION-SCREEN BEGIN OF BLOCK SEL2 WITH FRAME TITLE TIT2 .
    PARAMETERS: AIRPFFR LIKE SPFLI-AIRPFROM,
                AIRPTO LIKE SPFLI-AIRPTO.
    SELECTION-SCREEN END OF BLOCK SEL2
    SELECTION-SCREEN END OF SCREEN 5000.
    INITIALIZATION.
    TIT1 = 'ITIES'.
    aT SELECTION-SCREEN.
    CASE SY-DYNNR.
    WHEN '0500'.
       MESSAGE W159(at) WITH 'SCREEN 500'.
    WHEN '1000'.
       MESSAGE W159(at) WITH 'SCREEN 1000'.
    ENDCASE.
    START-OF-SELECTION.
    TIT1 = 'CITIES FOR AIRPORTS'.
    TIT2 = 'AIRPORTS'.
    CALL SELECTION-SCREEN 500 STARTING AT 10 10.
    TIT1 = 'CITIES AGAIN'.
    CALL SELECTION-SCREEN 1000 STARTING AT 10 10.

  • How to create cross tab reports in SAP-MII

    how to create cross tab reports in SAP-MII

    Hi,
    What do you mean by cross-tab reports? Pls elaborate.
    MII Transaction has an action block named 'crosstab' that is used to calculate subtotals of data columns.
    http://wbhelp.sap.com/manufacturing/xmii_120/en/44/749ea81627053ce10000000a1553f6/content.htm
    Is this what, you are looking for?
    Best Regards,
    Kedar
    Edited by: Kedar Shewalkar on Jan 11, 2011 10:40 AM

  • Problem while creating multiple tabs dynamically webdynpro abap

    Hi Experts,
    i am trying to create multiple tabs in tabstrip dynamically but the tabs are hiding behind one other..
    Let me know how to fix this.
    Thanks
    Abdul Hakim

    Are you expecting from expert only?Sorry I am not a expert, 
    About issue:...
    I think number of tabs will display that depends on the width of the container.. As of now how many tabs you have and hw many displaying at a time...
    Please increase width ofyour container and check  and let me know.
    Its just a try not a solution.
    Regards
    `srinivas

  • How to create multiple physical channels using DAQmx?

    Hi, I am new to Labview.
    Can anyone please help me on how to create multiple physical channels? I am following the LabVIEW examples in the NI example finder but they are only for acquiring signals from one channel.
    Actually, I am using the channels of an SCXI 1520 to measure voltage signals. And one more thing, in the NI Example Finder, they are sample codes there for setting the filter in SCXI 114x.
    Will this example work with an SCXI 1520, too?
    Thanks!

    There are many ways to read multiple channels in LabVIEW. First, if you look at that example that lets you set the filter setting on the 114x and you click on the 'Physical Channel Listbox' then click 'Browse' you can see that you can select multiple channels. After you select the channels and hit 'Ok' it will build a multiple channel string. This is one way to read multiple channels.
    Next, you can create a 'Task' in Measurement and Automation Explorer(MAX). When you create this task select all the channels that you need to read then back in LabVIEW simply select a 'DAQmx Task Name Constant' Select the task you just created and wire that to an Input of your first DAQ VI. If you do this you do not need to have a 'DAQmx Create Physical Channel' VI or create
    Task because it is already created in MAX.
    When looking at example VIs you can tell if a multi-channel read is acceptable by looking at the 'DAQmx Read' and if it says NChan that means it will do a multichannel read. There are tons of example programs that will display the multichannel read capabilities.
    This example may not work for the 1520 because the properties that are set could possibly be specific to the 142x. When using the 1520 though it is very likely that the properties will be very similar if not exact. You will simply put a DAQmx Channel property node on your block diagram and then look for the Lowpass filter settings properties that will most likely be in the same location. Now another way todo this without using a property node would be in MAX when you create a task set the filter settings from the Device tab in the task configure window.
    Let me know if you need anymore help with reguards to this issue! Have a great day!
    Allan S.
    National Instrument
    s
    Applications Engineering

  • How to generate multiple output pdf's from one oracle reports

    how to generate multiple output pdf's from one oracle reports.
    I have a report where I have to generate more than one output files from the same report based on a parameter.
    Each output file is for each parameter.
    Is this possible in oracle reports, is so how ?

    You can better post your question in the reports forum instead of this pl/sql forum.

  • How to create multiple instance on same database

    Hi ,
    I would like to know how to create multiple instance on same database . I know that some people use database configuration assistant to do this but i could not figure out how they did it.
    Any how if some one can help me with this and can give me links of this it would be great help for me.
    Thank you for reading my problem and helping me !
    Amil
    please if possible mail me on [email protected]

    How to create multiple instance?????Do you mean multiple instances on the same database, or multiple databases on the same machine ?
    I m new to this field....
    Willin to learn a lot about oracle....Then it wouldn't be bad reading a bit of Database Concepts

  • How to create multiple Tree Type Region In Tabular Form ?

    Dear Friends,
    i have to design tabular form to Distribute User Rioght to emp to access application
    eg if i have Three module in application
    1.Administration
    2.Attendance
    3.Accounts
    Module
    1 Administration have 5 Pages A,B,C,D,E.
    Module
    2 Attendance HAVE 4 Pages F,G,H,I
    Module
    3 Accounts HAVE 7 Pages J,K,L,M,N,O,P
    I need these three module divided into three section in tabular form as a tree Type like
    Module 1 Tree Open in Tabular Form like
    - (Tree Mark Open )
    =======================================================
    PAGE_ID-------------SUBPAGE_ID-------VIEW-------------------MODIFY-------------------CREATE----------------------------TABLE COLUMN NAME
    ========================================================          
    Administration-----------A------------------CHECK bOX------------CHECK BOX-------------CHECK BOX
    Administration-----------B------------------CHECK bOX------------CHECK BOX-------------CHECK BOX
    Administration-----------C------------------CHECK bOX------------CHECK BOX-------------CHECK BOX
    Administration-----------D------------------CHECK bOX------------CHECK BOX-------------CHECK BOX
    Administration-----------E------------------CHECK bOX------------CHECK BOX-------------CHECK BOX
    - (Tree Mark Open )
    Module 2 Tree Open in Tabular Form like
    Attendance-----------F------------------CHECK bOX------------CHECK BOX-------------CHECK BOX
    Attendance-----------G------------------CHECK bOX------------CHECK BOX-------------CHECK BOX
    Attendance-----------H------------------CHECK bOX------------CHECK BOX-------------CHECK BOX
    Attendance-----------I------------------CHECK bOX------------CHECK BOX-------------CHECK BOX
    - (Tree Mark Open )
    Module 3 Tree Open in Tabular Form like
    Accounts-------------J------------------CHECK bOX------------CHECK BOX-------------CHECK BOX
    Accounts-------------K------------------CHECK bOX------------CHECK BOX-------------CHECK BOX
    Accounts-------------L------------------CHECK bOX------------CHECK BOX-------------CHECK BOX
    Accounts-------------M------------------CHECK bOX------------CHECK BOX-------------CHECK BOX
    Accounts-------------N------------------CHECK bOX------------CHECK BOX-------------CHECK BOX
    Accounts-------------O------------------CHECK bOX------------CHECK BOX-------------CHECK BOX
    Accounts-------------P------------------CHECK bOX------------CHECK BOX-------------CHECK BOXi need divided these three Module in Tabular form in three region as tree.
    Table APPLICATION_PAGE_DETAILS
    ID                   NUMBER
    PAGE_ID             NUMBER
    SUB_PAGE_ID          NUMBER
    ========================
    TABLE USER_RIGHT
    ======================
    ID                  NUMBER
    EMP_ID            NUMBER
    PAGE_ID            NUMBER
    SUB_PAGE_ID        NUMBER
    VIEW                    VARCHAR2(1)
    MODIFY                VARCHAR2(1)
    CREATE                VARCHAR2(1)How to create multiple Tree Type Region In Tabular Form ?
    How can i do this ?
    Thanks
    Edited by: Vedant on Oct 4, 2011 3:21 AM
    Edited by: Vedant on Oct 4, 2011 9:09 PM
    Edited by: Vedant on Oct 13, 2011 8:57 PM

    Well think of it I believe the scenario is too bird viewed hence the solution can't be exact.
    But thinking of a possible solution every time a child operation fails have a catch block where you you go back to system if the parent needs to be deleted if yes, call Delete Method on the parent.
    Note: Make sure that the decision on whether or not the parent record needs to be deleted will depends on the question "Does Parent Record already has several other children associated to it or not"
    Hope this clarifies.
    Regards,
    Messer

  • How to create multiple pages in the output file?

    hi, we have an application (C++) that generates PDF output. I've been asked to figure out how to create multiple copies of each page (uncollated). i.e. the output would be 4 copies of p 1 followed by 4 copies of p 2, etc. I'd like to do this without actually replicating each page if possible ... any ideas?

    Why not just put four copies of the same CosObj reference into the Pages array/tree?

  • How to create multiple toolbar buttons in jsp ?

    hi all,
    how to create multiple toolbar buttons in jsp ?
    plz help me

    mgmt
    plzhttp://www.catb.org/~esr/faqs/smart-questions.html#writewell
    How To Ask Questions The Smart Way
    Eric Steven Raymond
    Rick Moen
    Write in clear, grammatical, correctly-spelled language
    We've found by experience that people who are careless and sloppy writers are usually also careless and sloppy at thinking and coding (often enough to bet on, anyway). Answering questions for careless and sloppy thinkers is not rewarding; we'd rather spend our time elsewhere.
    So expressing your question clearly and well is important. If you can't be bothered to do that, we can't be bothered to pay attention. Spend the extra effort to polish your language. It doesn't have to be stiff or formal ? in fact, hacker culture values informal, slangy and humorous language used with precision. But it has to be precise; there has to be some indication that you're thinking and paying attention.
    Spell, punctuate, and capitalize correctly. Don't confuse "its" with "it's", "loose" with "lose", or "discrete" with "discreet". Don't TYPE IN ALL CAPS; this is read as shouting and considered rude. (All-smalls is only slightly less annoying, as it's difficult to read. Alan Cox can get away with it, but you can't.)
    More generally, if you write like a semi-literate b o o b you will very likely be ignored. So don't use instant-messaging shortcuts. Spelling "you" as "u" makes you look like a semi-literate b o o b to save two entire keystrokes.

  • How to create multiple segments on the target structure of an IDOC

    Hi All
       I am working on the Shipment Confirmation Interface( Message Type SHPCON ) which is FILE to IDOC Scenario. I have a segment called E1EDL18 which occurs only once on the target side of the idoc. Now I have to created multiple E1EDl18 segments for the Qualifiers ORI, PGI and PCK. I treid to send a constant ORI,PGI,PCK and then used an user defined function which splits the constant at COMMA and then I am assigning to the target field QUALF. In the display queue for QUALF I see three values with context but still only one E1EDL!* segment is created. Please let me know how to create multiple E1EDl18 segments for three qualifiers.
    Thanks
    Naga

    In message Mapping, just right click on the segment and click on duplicate subtree. now it will create you another segment with same name and fields in it..
    you can hard code the Qual, or you can map the required source field into it.

  • How to create multiple Idocs in SAP R3 ?

    I have been asked question on Idocs from MNC company.
    How to create multiple idocs in R3 ? Please let me know.

    hi ,
    if you want to create in multiple IDOCS in XI , take XSD of IDOC and chnage the occurance to 1 to UNBOUNDED, you can genarate multiple IDOCS.
    Regards,
    Raj

Maybe you are looking for