How to create multiprovider in BI 7.0 using two cubes

Hi all,
how to create multiprovider in BI 7.0 using two cubes?

Go to the infoarea you want and right click and click create a Multiprovider.
In the deifiniton of MP, choos ethe two infocubes you want to add and continue.
Choose the dimensions you want to include in your MP.
Add the characteristics you want to include in the dimensions.
Add key figures.
Then identify which cube the characateristics and keyfigures should come from and activate.
search the forums also.

Similar Messages

  • How to create Multiprovider in BI7

    Hi all,
    Could anyone tell me how to create multiprovider in BI 7.Please provide me the steps or any document.
    Thanks,
    Manjula

    Hi,
    1. Create an InfoArea to which you want to assign the new MultiProvider.
    2.  Choose Modeling  InfoProvider.
    3.   In the context menu of the InfoArea, choose Create MultiProvider.
    4.   Enter a technical name and a description.
    5.  Choose  Create.
    6.   Select the InfoProvider that you want to form the MultiProvider. Choose  Continue. The MultiProvider screen appears.
    7.  Use drag and drop to transfer the required InfoObjects into your MultiProvider. You can also transfer entire dimensions.
    8.  Use Identify Characteristics and Select Key Figures to make InfoObject assignments between MultiProviders and InfoProviders.
    In a MultiProvider, each InfoObject in the MultiProvider must correspond to exactly one InfoObject in each of the InfoProviders involved (as long as it is available in the MultiProvider). If this mapping is not clear, you have to specify the InfoObject to which you want to assign the InfoObject in the MultiProvider.
    9.  Save or Activate the MultiProvider. Only active MultiProviders are available for analysis and reporting.

  • How to create a user in UME Database using web dynpro java custom application

    Hi,
    Can you please suggest me how to create a user in UME Database using web dynpro java custom application.
    My Requirement is user can register his/her user id in SAP Portal 7.3 UME database.
    Please suggest me.
    Thanks and Regards,
    Amit

    Hi Amit,
    Generated Documentation (Untitled)
    This is what you're looking for, there's no real cook-book -- though Amey mentioned there might be some material on SDN, perhaps some tutorials.
    You should be looking into com.sap.security.api.IUserFactory, methods newUser(String) which gives you and IUserMaint and commitUser(IUserMaint, IUserAccount) -- IUserAccount can be obtained using com.sap.security.api.IUserAccountFactory, method newUserAccount(String)
    Hope it helps,
    D.

  • How to create a muli line text area using JavaFx

    Hi all,
    Since the preview SDK does not contain TextArea any more, I am wondering how to create a muli line text area using JavaFX. The behaviour of this text area/field should be somehow similar to JTextArea in Swing or StyledTextWidget in SWT.
    Does JavaFX have any support for this? What would be a sensible approach to create such a widget?
    Thanks for your suggestions,
    br michael

    This is a pretty old thread (I know I came across this while searching for something similar recently), but I figured I'd throw this out there in case other people might find this useful. As I write this, JavaFX's latest version is 1.3... which may have added the needed functionality since the last post.
    You can now create a multi-line text area using a TextBox and by specifying the nubmer of lines and setting the "multiline" value to true. It may not offer all of the same functionality as JTextArea, but it did the job for what I needed... newlines by pressing enter, scrollbar if text surpasses height, etc.
    Here's a simple example:
    Group {
       content: [
          TextBox {
             text: "This is a multi-line textbox"
             lines: 10  // <-- this may/may not be necessary depending on your situation. Default is 5.
             multiline: true
    }Edited by: loeschg on Jul 29, 2010 2:59 PM

  • How to create a table in the file using java code.?

    HI,
    I should export the data from the view objects to a word document. I have done that but I should
    display the data in the form of a table.
    Kindly come up with the necessary information on how to create a table in the file using java.
    Thanks,
    Phani

    Hi, Thank you for responding to my query.
    The below are the details of my code.
    DCBindingContainer dcBindings =
    (DCBindingContainer)BindingContext.getCurrent().getCurrentBindingsEntry();
    DCIteratorBinding StudentDetailsContent =
    (DCIteratorBinding)dcBindings.get("StudentView1Iterator");
    OutputStreamWriter w = new OutputStreamWriter(outputStream, "UTF-8");
    Row currentRow =
    StudentDetailsContent.getRowSetIterator().first();
    Object a[]= currentRow.getAttributeValues();
    int i;
    for(i=0 ;i<=a.length;i++){
    w.write(a.toString());
    w.write(" ");
    w.flush();
    I am usning this coding to achieve the task of exporting data to file.
    I need to display this information in the table that is where I need help from you people.
    Thanks,

  • How to create Billing Plan in sales order using Function module /BAPI

    hi,
    How to create Billing Plan in sales order using Function module /BAPI
    i hv check few FM such
    BILLING_SCHEDULE_READ
    BILLING_SCHEDULE_GET_NUMBER
    BILLING_SCHEDULE_SAVE
    But unable to create billing plan for a sales order.....any other method to create???

    Hi,
    Use this link.
    Create sales order with billing plan via LSMW and BAPI BUS2032
    BAPI or Function to update Billing Plan in Sales Order Items
    Hope this will help you.
    Regards,
    Vijay

  • How to create a partner and header record using CRM_ORDER_MAINTAIN?

    Hi any one knows how to create a partner and header record using the function module CRM_ORDER_MAINTAIN??
    I tried to  create a record, but i only managed to create a header record and the partner record is not reflected in the transaction.  Why is that so? is there any indicator that i need to include?
    Thanks..
    Jen

    Hi Jen!
    I use this FM and it works perfectly.
    Use this to create a partner:
      gs_partner-ref_handle    = '0000000001'.
      gs_partner-ref_kind      = 'A'.
      gs_partner-ref_partner_handle = '0001'.
      gs_partner-partner_fct   = '00000001'.
      gs_partner-partner_no    = NO_PARTNER. "number of the partner, bu_partner
      gs_partner-display_type  = 'BP'.
      gs_partner-no_type       = 'BP'.
      gs_partner-kind_of_entry = 'C'.
    *  ls_partner_l-ref_handle    = '1'.
      gs_partner-ref_guid      = '00000000000000000000000000000000'.
      APPEND gs_partner  TO gT_partner .
      ls_input_field-ref_kind  = 'A'.
      ls_input_field-logical_key   = '0001'.
      ls_input_field-objectname  = 'PARTNER'.
      ls_input_field-ref_handle  = '0000000001'.
      ls_input_field_names-fieldname = 'DISPLAY_TYPE'.
      INSERT ls_input_field_names INTO TABLE ls_input_field-field_names.
      ls_input_field_names-fieldname = 'KIND_OF_ENTRY'.
      INSERT ls_input_field_names INTO TABLE ls_input_field-field_names.
      ls_input_field_names-fieldname = 'NO_TYPE'.
      INSERT ls_input_field_names INTO TABLE ls_input_field-field_names.
      ls_input_field_names-fieldname = 'PARTNER_FCT'.
      INSERT ls_input_field_names INTO TABLE ls_input_field-field_names.
      ls_input_field_names-fieldname = 'PARTNER_NO'.
      INSERT ls_input_field_names INTO TABLE ls_input_field-field_names.
      INSERT ls_input_field  INTO TABLE  gt_input_fields.
      clear ls_input_field-field_names[].
      CALL FUNCTION 'CRM_ORDER_MAINTAIN'
      EXPORTING
    *    it_schedlin_i   = gt_schedlin_i_com
        it_partner      = gt_partner
    *    it_sales        = gt_sales
    *      it_orgman       = gt_orgman
    *      it_appointment  = gt_appointment
    *      it_ordprp_i     = gt_ordprp_i
    *   it_product_i    = gt_product_i
    *      it_activity_i   = gt_activity_i
    *      it_pridoc       = gt_pridoc_com
      CHANGING
        ct_orderadm_h   = gt_orderadm_h
    *   ct_orderadm_i   = gt_orderadm_i
        ct_input_fields = gt_input_fields.
    *      ct_doc_flow     = gt_doc_flow
    *      cv_log_handle   = gv_log_handle.
    Hope it helps u,
    Regards,
    Mon.

  • How to create an instance for RemoteSession without using create() method

    How to create an instance for RemoteSession without using create() method?

    What's RemoteSession? Not in the JDK. And does the question have anything to do with concurrency?

  • How to create Support function for internal Class use

    I have created a class to find the MoonRise and Set time. There is a java code available and I am translating it to Obj-C.
    My problem is that for the calculation there are many support functions which is internally used. When I try to duplicate this as follows
    -(double) frac:(double)x {
    // returns the fractional part of x as used in minimoon and minisun
    double a;
    a = x - floor(x);
    if (a < 0) a += 1;
    return a;
    -(void)minimoon:(double)t {
    // takes t and returns the geocentric ra and dec in an array mooneq
    // claimed good to 5' (angle) in ra and 1' in dec
    // tallies with another approximate method and with ICE for a couple of dates
    double L0, L, LS, F, D, H, S, N, DL, CB, L_moon, B_moon, V, W, X, Y, Z, RHO;
    //var mooneq = new Array;
    L0 = frac(0.606433 + 1336.855225 * t); // mean longitude of moon
    At this point it gives an error implicit declaration of function frac,
    My question is how to create such helper functions which are used internally, actually there are many such functions where functionA call B which calls C.
    Thanks
    Raj

    Here's yet another approach (creating a private category):
    @interface MYClass (Private)
    - (double)frac:(double)x;
    @end
    @implementation MYClass
    - (void)minimoon:(double)t {
    // takes t and returns the geocentric ra and dec in an array mooneq
    // claimed good to 5' (angle) in ra and 1' in dec
    // tallies with another approximate method and with ICE for a couple of dates
    double L0, L, LS, F, D, H, S, N, DL, CB, L_moon, B_moon, V, W, X, Y, Z, RHO;
    //var mooneq = new Array;
    L0 = [self frac:(0.606433 + 1336.855225 * t)]; // mean longitude of moon
    - (double)frac:(double)x
    // returns the fractional part of x as used in minimoon and minisun
    double a;
    a = x - floor(x);
    if (a < 0) a += 1;
    return a;
    @end
    <div class="jive-quote">rajkhand wrote:
    I liked the first method as I don't have to change much of the java code.
    I like it too. I use that very regularly (though I often use C++/Objective C++), since there is typically a lot of implementation in any class that does not need to be an ObjC instance method. This approach helps to reduce the object's interface to its essentials while keeping maintenance low.
    I'll put all the helper functions above the implementation.
    Is there a good book/web site where I can get such insight? I know C and Delphi/pascal
    Well, Objective-C is a superset of C. If you're porting Java, you'll find protocols (ObjC) similar to interfaces (Java).
    *Getting Started*
    Apple's version of ObjC is different from others. For the language, Apple's docs are the standard (IMO):
    Language:
    http://developer.apple.com/documentation/Cocoa/Conceptual/ObjectiveC/ObjC.pdf
    If you are comfortable with C, this guide will help learning Objective-C quickly, though it has not been updated for (Apple's) Objective-C 2.0:
    http://www.amazon.com/Objective-C-Pocket-Reference-Andrew-Duncan/dp/0596004230/r ef=sr14?ie=UTF8&s=books&qid=1245404236&sr=8-4
    There are a few books on the ObjC2 language, but I have not read them (I just read Apple's docs for this).
    OOP/Design:
    http://developer.apple.com/documentation/Cocoa/Conceptual/OOPObjC/OOPObjC.pdf
    Research
    Good site for archives of tips, tricks, and even some hacks:
    http://www.cocoadev.com/
    Apple's lists (Cocoa, Xcode, ObjC, and specific technologies):
    http://lists.apple.com/mailman/listinfo
    This one sees the most traffic for Cocoa, and ObjC topics :
    http://lists.apple.com/mailman/listinfo/cocoa-dev
    Online archive for aforementioned Xcode and Cocoa list submissions:
    http://www.cocoabuilder.com/
    There are a lot of good sites/blogs out there as well.
    Questions
    Apple's lists (linked above) will typically yield good answers in a short time, you can also try here.
    Thanks a million
    Raj
    You're Welcome,
    J

  • How to Create Test Sequence Document in HTML using command line

    How to Create Test Sequence Document  in HTML using command line
    I have lot of sequences and I want to create Test Sequence Documentation in HTML format using Command Line automatically, is there a way to automate this task using .bat file or using   C#  .Net

    If you aren't able to figure out how to call a C++ DLL in .net then there may be another option.  Unfortunately I don't know how to do this off the top of my head and I don't have an example.
    The other option would be to change docgen.seq a little bit to the dialog doesn't display and you just hardcode the options.  Then you can use a command line to call testexec.exe: http://zone.ni.com/reference/en-XX/help/370052K-01/tsfundamentals/infotopics/startup_opt/
    Hope this helps,
    jigg
    CTA, CLA
    teststandhelp.com
    ~Will work for kudos and/or BBQ~

  • How to create dynamic connection string with variables using ssis.

    Hello,
    Can anyone let me know on how to create dynamic connection string with variables using ssis?
    Any help would be appreciated.

    Hi vinay9738,
    According to your description, you want to connect multiple database from multiple servers using dynamic connection.
    If in this case, we can create a Table in our local database (whatever DB we want) and load all the connection strings.  We can use Execute SQL Task to query all the connection strings and store the result-set in a variable of object type in SSIS package.
    Then use ForEach Loop container to shred the content of the object variable and iterate through each of the connection strings. And then Place an Execute SQL task inside ForEach Loop container with the SQL statements we have to run in all the DB instances. 
    For more details, please refer to the following blog:
    http://sql-developers.blogspot.kr/2010/07/dynamic-database-connection-using-ssis.html
    If there are any other questions, please feel free to let me know.
    Regards,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • How to create a clickable Table of contents using Crystal Reports 8.5

    How to create a clickable Table of contents using Crystal Reports 8.5. I was able to create the table of contents using subreport and temporary table. but not able to link to the pages.
    how to make it clickable ?
    -Vivek

    Hi Vivek,
    To you may create on demand sub report.
    In main report only the link will be shown when you click on the link the sub report will be opened in a new tab.
    It can be placed in a Group header and to show the data for that particular group only.
    Click on the Help menu in the crystal Reports Designer and open the Crystal Reports Help
    Go to Index tab and type in subreport
    Select Creating On demand you will get lot of information on that.
    Please let us know if that is enough to solve your problem
    Regards,
    Aditya Joshi

  • How to create tab pages in Human task Using Wizard

    hi,
    how to create tab pages in Human task Using Wizard.i need to display the personal details and the offical details in the same page with different tabs for each.it is possible to do lika this.if yes,how can we do this.
    Regards

    Stuart,
    Within a SAP Portal Tabs are not used like you want them to
    By default Tabs are used inside an iView and not to "tab" between iViews on a page...
    The most straightforward solution would be creating a custom PageLayout that you can assign to your page.
    I would sugest to implement this custom PageLayout with DIV layers and trigger "tabbing" via JavaScript eventing.
    For more infor on how to create a custom PageLayout take a look at here:
    [http://help.sap.com/saphelp_nw70/helpdata/en/42/efbac120711a71e10000000a422035/frameset.htm|http://help.sap.com/saphelp_nw70/helpdata/en/42/efbac120711a71e10000000a422035/frameset.htm]
    Good Luck,
    Benjamin Houttuin

  • How to Create PDF from Illustrator CS3 by using applescript?

    Hi Guys,
    Do some one knows how to create PDF from Illustrator CS3 by using apple script. If know, please give me the scripting.
    HARI

    Have you tried File>Scripts>SaveDocsAsPDF? There should be a folder of sample scripts installed in your AICS3 folder and a folder of documentation which contains an Illustrator AppleScript Reference which has examples.

  • How to create snapshot portlet and snapshot query using server API

    How to create snapshot portlet and snapshot query using server API
    Regards
    Dheeraj

    Hi Sebastian,
    I have used the query and it is working fine. but, How could i include the headers of the query also in to the Excel Sheet.
    RehaanKhan. M
    see the method discussed here
    http://sqlblogcasts.com/blogs/madhivanan/archive/2008/10/10/export-to-excel-with-column-names.aspx
    Please Mark This As Answer if it solved your issue
    Please Vote This As Helpful if it helps to solve your issue
    Visakh
    My Wiki User Page
    My MSDN Page
    My Personal Blog
    My Facebook Page

Maybe you are looking for