How to create nested Handling units at VL01n Outbound delivery

Hi
Please assist me
How to create Nested Handling units at the time of Outbound delivery VL01n

Hi,
go to Edit-Pack,
In First tab will be "Pack Material", give Packing Materials & enter. You will get a HU Number generated. select this line & the line in Material to be packed. Click on Pack button. The material is packed into a HU.
Now go to Second tab "Pack HUs". Here also give Packing Materials & enter. You will get a HU Number generated. select this line & the line in All Handling Units that can be packed. Click on Pack button. The HU is packed into another HU.
Nagesh

Similar Messages

  • Handling unit weight into outbound delivery weight?

    Hi,
    I would like to transfer the total of my Handling unit weight to my outbound delivery weight. This is at this moment copied from the Sales order. How can I change that SAP will use the weights of the HU? Anybody?
    Thank you,
    Eric van Zundert.
    Edited by: eric van zundert on Feb 25, 2008 2:49 PM

    Dear Eric,
    if you also want to add the weight of the packaging materials to the weight of the delivery, you will have to create a delivery item for the packaging materials. Please check note 831204 for the necessary settings.
    I hope I could help you with this.
    Regards,
    Ely

  • Handling unit cost in outbound delivery

    Hello,
    When i create an outbound delivery i pack the materials in handling units.
    My question is how to include the packaging material of the handling unit within the delivery in order we can debit the customer.
    In fact in the delivery we are sending the customer not only the materials from the order but also the packaging material (such as pallet) so we want to include this packaging material in the costs.
    Thanks in advance.
    Shmulik

    Dear Eric,
    if you also want to add the weight of the packaging materials to the weight of the delivery, you will have to create a delivery item for the packaging materials. Please check note 831204 for the necessary settings.
    I hope I could help you with this.
    Regards,
    Ely

  • Confirming transfer order for nested handling units (picking and shipping)

    Hi
    My shipping location is HU + WM, I understand we cannot "auto confirm" Transfer Orders during creation from an outbound delivery (LT03) in the case of nested HUs because the system wants to know which exact box HUs ( The TO only specifies the pallet HU...storage unit)
    I have an automatic Pick HU created during TO confirmation but the system still prompts for me to enter  box HUs that need to be shipped/repacked on LT12. This makes logical sense but is slowing down our shipping process. Since we do not put HU labels on our boxes, the picker has to go into HUMO, enter the pallet HU, retrieve the box HUs and finally enter some of those on the TO confirmation screen to match the open quantity. In reality we don't really care what HUs he picks as long as he picks from the right pallet.
    Is there any way to automate this? If the system can pick box HUs sequentially, randomly or create further pick HUs. Anything but doesnt ask the picker to put in the box HU numbers
    OR
    Is there a way to auto confirm TOs during creation
    OR
    Is there any way to putaway box level HUs into the warehouse at the end of the production line so that Storage Unit is the box HU number and not the pallet HU number, that way it wouldn't prompt me for box HUs during picking.
    I would really appreciate your help.

    This is the standard SAP for picking nested handling units.  You can do some more reading on this by accessing the SAP note 829266.
    We had a similar problem with nested handling units - what we ended up doing was writing a BDC program that would take the nested handling unit and pack it back onto that HU instead of the pick HU after TO confirmation was done in the delivery. 
    In order to get your TO to automatically confirm, check the configuration for the storage type that its picking from - look to see if "Storage Type requires confirmation for removal/placement" is checked. 
    You can als ocheck the movement type configuration for Propose Confirmation.

  • How to generate the handling unit in alphanumeric by sequence

    Is there any way to serial generate the box id in alphanumeric?
    such as number range set is from 00000 ~ ZZZZZ
    when the number is 00009, the next number can be auto got as 0000A,
    can SAP support this function?

    Could you please point me in the right direction of how to set up handling unit ranges with alphanumeric characters?
    Thanks

  • How to create an handle for Miniport driver Ioctl interface?

    Hi All,
    I am trying to create an handle for my miniport driver Ioctl interface, but it showing the following error while opening the handle with CreateFile API.
    "you are requesting IOCTL_HAL_GET_DEVICE_INFO::SPI_GETPLATFORMTYPE,
    which has been deprecated. Use IOCTL_HAL_GET_DEVICE_INFO::SPI_GETPLATFORMNAME
    instead"
    Can anyone suggest on how to create the handle for Miniport Ioctl interface?
    Thank you,
    Sagar

    Hi,
    I have seen this error only in GUI based apps. Maybe you are pointing to the wrong error.
    Check if CreateFile returns INVALID_HANDLE_VALUE. API return value should give you more information.
    Regards,
    Balaji.

  • How to create nested CASE statements in PL/SQL

    Can anyone please tell how to create Nested CASE statements in PL/SQL with proper syntax?
    It would be better if you can help with an example.
    Thank you!

    Something like this:
    SQL> set serveroutput on
    SQL> declare
      2    v1 number := 2;
      3    v2 varchar2(1) := 'C';
      4  begin
      5    case v1
      6      when 1 then dbms_output.put_line('First');
      7      when 2 then begin
      8                    case v2
      9                      when 'A' then dbms_output.put_line('Found A');
    10                      when 'B' then dbms_output.put_line('Found B');
    11                      when 'C' then dbms_output.put_line('Found C');
    12                      else dbms_output.put_line('NONE');
    13                    end case;
    14                  end;
    15      else dbms_output.put_line('Else');
    16    end case;
    17  end;
    18  /
    Found C
    PL/SQL procedure successfully completed
    SQL> If you have further doubts regarding syntax you can read the docs on the Case statement here:
    http://download.oracle.com/docs/cd/E11882_01/appdev.112/e10472/case_statement.htm

  • How to create Extra Freight Unit for LCL Forwarding Order in Web Version of SAP?

    Hi,
    Can anyone please tell me how to create Extra Freight Unit in LCL Forwarding Order. Normally, each LCL Forwarding Order has one Freight Unit. But, if there are two types of Dangerous Goods and need to be transported via separate containers. Obviously, it should have separate Freight Unit to be created in the system. But, even adding package in Items Tab, unable to create Freight Unit for LCL order. Is there any other way to create Extra Freght Unit?

    Hi Aaron,
    When the FWO saving, it would build the freight unit auotmatically.
    The filed "Document Type" in FUBR is used to specify the FU type.
    So the FWO build the FU base on the FUBR which maintain in the FWO type.
    Useful link for FUBR :
    http://help.sap.com/saphelp_tm80/helpdata/en/5a/6749c4614f46e2a12160c775ff19de/frameset.htm
    Best Regards
    Clark Huang

  • How to create an operating unit

    Please can someone direct me on how to create an operating unit and assign it to a ledger. I don't seem to get my way trying to do this. Thankyou.

    Navigate to, US Super HRMS Manager > Work Structures > Organization > Description. Create New. Then enter the Operating Unit Name, Location and Address. Now add a new record in Organization Classifications region and choose Operating Unit. It will add Operating Unit in the Organization classifications. Then click on Others and enter Operating Unit information.
    KG

  • Handling Unit Number range per delivery.

    Dear All,
    Please guide me how we can configure Handling Unit number ranges so that for each delivery document, Handling numbers should be started from 01.
    Thanx in advance.
    Anup

    Dear Reazuddin,
    Thanks for your early response.
    As per standard SAP functionality,  we assign a number range to handling units and system automatically assigns serial numbers to each handling unit.
    But My requirement is suppose I am packing materials in a delivery document, then the handling numbers of these packs should start from 1,2,3 so on. And for next delivery also system should give me (or allow to enter) once again starting from 1 and not 04.
    I hope my requirement is clear.
    Please advise any solution on this.
    Any further updates please.....?
    Thanx,
    Anup
    Edited by: anupam sharma on Oct 12, 2010 2:29 PM

  • How do we do Automatic freight preperation for outbound delivery in SAP

    How do we do Automatic freight preperation for outbound delivery in SAP

    'Automatic freight preperation'? New concept that SAP came out with? Or is it Freight Calculation? If it is the latter, activate Shipment and Transportation and you have it in a jiffy. You need to work on VT01N, possibly VI01. Plenty of work in SPRO, too
    Regards
    Ramana ND

  • Creation of handling unit through VL01N

    HI ALL,
    i have a requirement like in vl01n we will give shipping point and sales order and we press enter and we will give picking quantity and we will press save button . here when ever i press save button i need delivery number with auto packing handling unit number also. how to do technically?
    thanks
    ram.

    Hi,
    In industry solution - automotive solution, this can be done by HUP12 - create planned HU's for sales order.
    In generic SAP, this can not be done.
    Hope this helps.
    Harry

  • Nested Handling Units and Confirmation of Transfer Order - Pick HU

    Friends & Gurus,
    I have nested (low level) handling units and when confirming  I would like one of the nested HU to become the pick-HU. So far I haven't been able. The pick-HU is always generated with a new number and if I try to assign manually one of the nested HU the systems says that the HU is not assigned to the TO.
    Any comments or ideas will be appreciated.

    I fully agree and thanks for coming back.
    I can unpack the nested HU and then create a TO and select the unpacked HU (now a SU) as a full HU removal. I believe this is not operative, the idea is the operator gets to the big box, chooses (scans) one of the small box (nested) and confirms the TO. If somebody back at the office has first to unpack one of the nested HU (how could he know which one if there are 30 of them? Which one is on the top?) it makes it unviable.
    Are we on sync?

  • LT12: how to manipulate the handling unit

    Dear all,
    This is my first message on this forum and I've seen many bright lights on this forum so I have high hopes of your response to my question : )
    When I want to confirm a transfer order with trx LT12, 2 Handling Units (HU) are assigned (which can be seen in the lower part of the screen). I have 2 items in my active worklist (different storage units) and can modify some fields, including the HU. For some reason both items have the same HU (the upper one of the assigned HU). I would like the first item to have the first HU and the second item to have the second HU.
    My question is simple (and I had thought this would be possible but I've tried a LOT and did not succeed, hence my cry for help here): is there a possibility to manipulate the Handling Unit before it is shown on the screen? I did not seem to find a suitable BADI/user exit.
    Any help would be greatly appreciated. Thanks in advance for your efforts!
    With kind regards,
    Roel van den Berge

    Dear Roel van den Berge
    if iam not wrong you can achieve the same by  TO split
    Transfer Order Split
    Use
    To optimize processes in the warehouse, it often makes sense to split up putaways and stock removals into smaller packets according to certain criteria. In doing so, it is important, for example, to:
    •     Distribute the workload equally amongst the warehouse workers
    •     Optimize stock movements in the warehouse according to certain criteria.
    The transfer order (TO) represents a work package and determines the actual workload for a putaway or stock removal. It can therefore make sense to split a single, extensive transfer order into several smaller transfer orders. During the TO split, the system creates several smaller packets from one large one.
    During the TO split, the TO items are divided up between one or more TOs. A TO split does not however mean that the system divides individual items of a TO into smaller TO items.
    Prerequisites
    1.     You define the criteria according to which the TO split is to occur in the Customizing for Warehouse Management under Activities  Transfers  Processing Performance Data/TO Split  Define Profiles.
    a.     To define a TO sort profile, choose Sort profile for TO splitting.
    In the sort profile for the TO, you define the criteria according to which you want to sort the items in a transfer order before the actual split.
    For each of these sort criteria, you define whether the system is to sort the transfer order items in ascending or descending order.
    Before the actual dynamic TO split, you must sort the corresponding TO according to certain criteria. By sorting the TO items, you ensure that the TO split is sensibly executed and that no nonsensical TO splits occur.
    b.     To define a TO split profile, choose Profile for Transfer Order Splitting.
    c.     You assign your sort profile to the TO split profile by entering it in the field Sort profile.
    2.     You determine when the TO split should take place in the Customizing for warehouse management under Activities  Transfers  Processing Performance Data/TO Split  Control for Performance Data Processing/Define TO Split.
    You also assign a key to the TO split profile, consisting of a warehouse number, movement type, source storage type and destination storage type.
    Features
    Standard Sorting of TO Items
    Control of the TO split occurs on the basis of the sort. The system defines the sequence of the items in the transfer order before the actual TO split via the sort, so that the sequence of the TO items corresponds to an optimal sort sequence for later processing.
    Since the system always executes the forced split of the transfer order items according to the forced split criteria, the system always sorts the TO items in the standard sort in accordance with the forced split criteria in the order that the forced split criteria are processed.
    Forced Split
    Even if you have not set any user-defined criteria for the TO split, the system always executes a TO split according to the following forced split criteria:
    •     Planned data is required
    The TO split first divides the TO items for which planned data creation is required, from the TO items for which planned data creation is not required.
    The TO split also causes a further division for all TO items with planned data creation, according to the source storage type and destination storage area criteria.
    •     Per split profile
    As soon as TO items differ from one another in the split profile to which they are assigned, a TO split occurs according to the split profile criterion.
    •     Per performance data profile
    As soon as TO items differ from one another in the performance data profile to which they are assigned, a TO split occurs according to the performance data profile criterion.
    •     Per staging area
    The TO split divides the TO items according to the staging zone to which they are assigned.
    •     According to mixed pallets
    The TO split then separates the TO items containing mixed pallets from those containing no mixed pallets.
    The TO split also creates a further division of all TO items with mixed pallets according to the storage unit that is to be moved.
    •     According to queue
    The TO split divides the TO items according to the queue that these TO items are assigned to.
    If you work with queues, you can assign each work area to its own printer. That way, all materials that are to be processed in a specific area can be combined in one list and printed on the assigned printer.
    •     According to handling unit items
    The TO split then separates the TO items containing handling units from those containing no handling units.
    •     Separate confirmation of the withdrawal step and the transfer step is necessary
    The TO split divides the TO items with split confirmation from TO items for which split confirmation is not planned.
    The system transfers the information on the forced split to the header via the transfer orders, which are created as a result of the TO split.
    The forced split criteria are obligatory. You cannot influence the forced split via the user exit. The system does not adopt any changes to the forced split criteria.
    Dynamic Sorting
    Before you can execute a dynamic TO split controlled via the Customizing settings, the TO items should be sorted according to the split criteria. In doing so, you ensure that the TO split is sensibly executed and that no nonsensical TO splits occur.
    You can define the sequence of all the storage bins in the warehouse based on a specific sequence and sort the TO items according to this sequence. The system sorts according to the Sequence indicator in the warehouse master data.
    Dynamic Split
    You can define several criteria for the TO split in the Customizing for Warehouse Management.
    •     Split according to movement unit
    On the basis of this split criterion, you create a new TO for each movement unit. In doing so, you create TOs with one item for exactly one movement unit.
    You use this split, for example, during goods receipt when a whole pallet is moved from the GR area into the warehouse.
    You define the split according to movement unit in the Customizing for Warehouse Management under Activities  Transfers  Processing Performance Data/TO Split  Define Profiles  Profile for performance data with the indicator Split single TO.
    •     Split according to picking area
    You divide up the items to be picked according to the areas of responsibility of the picker.
    •     Split according to target times in the TO
    You determine, for example, how long the picking for a transfer order is allowed to take.
    •     Split according to scope (weight or volume)
    You determine the total weight or volume that a transfer order can cover for putaway or stock removal.
    Note that the volume is calculated based on the alternative unit of measure. A box with 10 bottles, for example, can have a different volume than 10 times the volume of one bottle. If the volume for the alternative unit of measure has not been defined in the material master record, the system uses the volume from the base unit of measure for its calculation.
    Activities
    Note that you have no influence over the TO split according to forced split criteria.
    You can, however, define your own criteria for a dynamic TO split via user exit MWMTO012. For more information, see the system documentation on this user exit

  • How to make a handling unit object (packing) automatically generate from inbound

    Hi guru,
    I just have a question which I am sure sure and puzzle, and hope you can give me an accurate information.
    Background:
    We are using EDI communication so that vendor can send us advance shipping notification and will lead to inbound delivery creation automatically.
    Question:
    We would like the vendor, when deliver the shipment for us to be packed base on our instruction, and we want the handling unit object to be created automatically upon inbound delivery creation from the EDI. How to do this in SAP?
    Thanks.
    Daniel

    if you are using message type DESADV / SHPCON then vendor needs to send the HU information in the E1EDL37(HU Header)  / E1EDL44 (HU Item) segment and during Inbound delivery creation system will update the IBD with HU . Have a look on the below standard Link to get more detail
    Delivery Interface - Shipping (LE-SHP) - SAP Library

Maybe you are looking for