How to Create New Activity Type  for Assiged to work centre Costing in Acti

Dear Sir,
We have four activity type to assigned in workcentre Costing Activity. Details are as under
AIRJET     2010     AIRJET
DONIER     2010     DORNIER
SULTEX     2010     SULTEX
SULZER     2010     SULZER
in addition one more loom is comming in our unit and require new activity type.
How can i create new.
Please guide.
Thanks in advance
Regards
Ajit

Dear ,
To create new Activity Type  , you need to follow the below steps :
KA01 - Create Primary Cost Element for the new activities type.
KL01 - Create Activity Type tied to the primary cost element. 
KP26 - Change Activity Type/Activity Price Planning - maintain the Variable price
Assign the activity type to cost center using T code KP26.
In the input screen of T code KP26 ,enter version as 0, from period 1 and to period as 12 and the Fiscal Year as 20xx.
Click on Overview tab on top and key in costing details in this screen.
After performing this ,while creating the work center ,this combination of activity type & cost center should be assigned.
At work centre level , you should have
1.Create Standrad Value Key -OP19 and Formula Key in OP49.
2.Create Formula Parameters in OP7B or u can use existing one to assing in the Standard Value Key
3.In CR02-Assing the Standard value key in Basic Data  and select the Formula Key in Costing tab with cost centre assingement .Save
Try and check
Regards
JH

Similar Messages

  • How to create new starting conditions for a workflow of shopping cart

    Hi all,
    How to create new starting conditions for a workflow of shopping cart
    SATYA

    Excecute SWB_COND
    Creating New:
    Click on Create button. If you cannot see that it could be a authorization issue
    then Business Object:  BUS2121
    Double Click the event linkage for one step workflow
    Define the expressions, Check Consistency and click on Traansfer
    Start Condition is created. If it is not Active click on the Red Button to make it Active
    Editing Already existing:
    Click on Edit Button If you cannot see that it could be a authorization issue
    then select Business Object:  BUS2121
    Click on the condition part (White area) of the start condtion needing editing
    Change the expressions, Check Consistency) and click on Traansfer.If it is not Active click on the Red Button to make it Active

  • Can we create new partner types for quallity notifications in SAP system?

    Can we create new partner types for quallity notifications in SAP system?
    The business requirement is to limit the available entries for partners  displayed when they search in quality notification. I have already created new partner functions & assigned the relevant partner types, however struggling with defining new partner types.
    Would appreciate help in resolving this.
    Thanks,
    Nilesh

    I know this customisation setting ...It allows us to create the partner functions & assign it to the partner determination procedure.
    Then you can assign the procedure to the notification type.
    This customisation setting does not solve the problem I have.
    I'm looking for the partner type creation process which we assign to the partner function.
    Edited by: NILESH BHAVE on Aug 12, 2010 3:06 PM

  • How to create new authorisation object for Transactions?

    Hi,
    How to create new authorisaton object and how to assign that object on a transaction code?
    Case ->
    The transaction code VL01N have the object called V_LIKP_VST under Class "LE_V" that have two auth. fields. one is 'Activity' and other one is "Shipping Point/Receiving Point".
    Here I want to add "Storage location" also. I have created one object called "Z_LIKP_VST" under same calass "LE_V". and added "Activity", "Shipping Poing/Receiving Poing" and "Storage Location". After that I added that object ("Z_LIKP_VST") for particular transaction through "SU24". I maintained the "Display check indicator" for VL01N.
    I created one new role and assigend the particular transacation for a user. but still SAP taking  V_LIKP_VST insted of Z_LIKP_VST.
    How can I change my Z_LIKP_VST on profile.
    Please help
    Thanks in Advance
    Lal

    Hi Kariyath,
    I suppose its not about interest but a MUST.. sorry but.. unless u include the Logic in the program how can SAP pick these custom Z objects ?
    after u create them and assign to a Tcode in SU24 there is no logic to check these objects. Frankly i see no other chance.... unless SAP comes to us with a great easy way to input these Custom objects
    Keep looking and please Update me if u have any Inputs....on this front..
    All the Best
    Br,
    Sri
    Award points for helpful answers

  • How to create new Partner Numbers for WE20?

    Hello colleagues!
    While creating new Source System for R/3 system in automatic mode providing existing RFC (SM59), system errored with message E0552 "Error during insert in port table".
    I tried creating new Partner Profile "FI5FIN100D" in WE20 (partner type=LS of course) by copying existing "FI2FIN200D" partner profile (LOGICAL SYSTEM also), but I received error:
    ==================
    Enter a permissible partner number
    Message no. E0342
    Diagnosis
    The partner number 'FI5FIN100D' does not exist for the partner type 'LS'.
    Procedure
    Enter a valid partner number and make sure that this partner number exists for the partner type
    ===================
    Where do I create this in BW? I tried WEDI but I received error:
    =========
    Transaction WEDI is an area menu and cannot be executed
    Message no. OZ037
    =========
    I have SAP BW 3.0b, SP 26, Basis/Abap SP 48.
    Can somebody help please?
    Thank you in advance.
    Mario Vallejo.

    Hi Mario,
           In Partner Feild u have give the Logical System Name i.e particular to the client which is already  create in SALE Transaction.It is taken by Basis People i think.I think it is already created .give that Logical sytem name in Partner Number.
    For ex Partner Number: LGS100(This is created in SALE   
                                  Tr and  assign it to 
                                  client i.e like 100 or 200)
           Partner Type  : LS
         In PostProcessing Tab
             Type : 'US' or 'o'(depending on client)
            Agent : Randomly it (Generates)creates Number
            Lang  : EN
    Hope This Help
    Sreeni

  • How to create new agent types  in transaction CBIH92.

    Hi guru's,
    Can anybody tell me how i can create new agent types .
    thanks and regards,
    Pronoy.

    Hi Pronoy
    Agent types are not created in CBIH92, those have to be created in IMG setting as per following path
    SPRO --> Environment, Health and Safety --> Industrial Hygiene and Safety --> Risk Assessment --> Specify Agent types
    Hope it will help you.
    Regards
    Vikram

  • Create new Documentation types for Template project

    Hi Expert,
    Can anyne tell me the process for creating new documentation types under projects standards tab under solar_project_admin for project?
    Thanks,
    Basis Admin

    Resolved !!!!!

  • How to create new text symbols for the standard program.

    Based on the customer's requirement, I need to create a new implicit enhancement for the selection screen.
    I want to create new text symbols for the parameters and blocks, but I cannot change the standard ones.
    Does anybody know something about that? Thank you.

    hi ming yu,
    example : %_MATNR_%_APP_%-TEXT -> this is the material  description name in mb5b
    change the description in ur enhancement implementation
    %_MATNR_%_APP_%-TEXT = 'Material'
    it is works only input/output field
    Thanks&Regards,
    naveen

  • How to create the Data Type for the receiver end?

    Hello Expertise
    I wanted to Create a Data type for  Receiver end in PI.
    Sender end is ECC.
    Receiver end is SRM
    Here's the Data type for Sender end  as
    Can anyone help to create the Data type for Receiver end i.e SRM.
    Thanks in advance.
    Regards
    karan

    Hi Karan,
    Please don't call Sir, we are just trying to help each other.
    Please go through below scenario's and check your configuration.
    ABAP Client Proxy to ABAP Server Proxy Scenario - Process Integration - SCN Wiki
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e0ac1a33-debf-2c10-45bf-fb19f6e15649?overridelayout=true
    http://wiki.scn.sap.com/wiki/display/XI/Step-by-step+FTP+to+ABAP+Proxy
    regards,
    Harish

  • How to create new Wage type specifically for IT14 and IT15 only

    Hi Gurus,
    I was assigned to create a new wage type to be used for Infotypes 14 and 15 only.
    Another thing is to have this for % deduction rather than having a fixed amount ($).
    Appreciate all your help.
    thanks!

    FOR IT0014
    PM - - - -  > PA- - - -  >PAYROLL DATA- - - -  > RECURRING PAYMENTS AND DEDUCTIONS- - - -  >WAGE TYPES- - - -  >CREATE WAGE TYPE CATALOG
    PM - - - -  > PA- - - -  >PAYROLL DATA- - - -  > RECURRING PAYMENTS AND DEDUCTIONS- - - -  >WAGE TYPES- - - -  >Check wage type group 'Recurring Payments and Deductions
    PM - - - -  > PA- - - -  >PAYROLL DATA- - - -  > RECURRING PAYMENTS AND DEDUCTIONS- - - -  >WAGE TYPES- - - -  >CHECK WAGE TYPE CATALOG- - - -  >CHECK ENTRY PERMISSIBILITY PER INFOTYPE
    PM - - - -  > PA- - - -  >PAYROLL DATA- - - -  > RECURRING PAYMENTS AND DEDUCTIONS- - - -  >WAGE TYPES- - - -  >CHECK WAGE TYPE CATALOG- - - -  >Define Wage Type Permissibility for each PS and ESG
    PM - - - -  > PA- - - -  >PAYROLL DATA- - - -  > RECURRING PAYMENTS AND DEDUCTIONS- - - -  >WAGE TYPES- - - -  >CHECK WAGE TYPE CATALOG- - - -  >Check wage type characteristics
    FOR IT0015
    PM - - - -  > PA- - - -  >PAYROLL DATA- - - -  > ADDITIONAL PAYMENTS- - - -  >WAGE TYPES- - - -  >CREATE WAGE TYPE CATALOG
    PM - - - -  > PA- - - -  >PAYROLL DATA- - - -  > ADDITIONAL PAYMENTS- - - -  >WAGE TYPES- - - -  >Check wage type group ADDITIONAL PAYMENTS
    PM - - - -  > PA- - - -  >PAYROLL DATA- - - -  > ADDITIONAL PAYMENTS- - - -  >WAGE TYPES- - - -  >CHECK WAGE TYPE CATALOG- - - -  >CHECK ENTRY PERMISSIBILITY PER INFOTYPE
    PM - - - -  > PA- - - -  >PAYROLL DATA- - - -  > ADDITIONAL PAYMENTS- - - -  >WAGE TYPES- - - -  >CHECK WAGE TYPE CATALOG- - - -  >Define Wage Type Permissibility for each PS and ESG
    PM - - - -  > PA- - - -  >PAYROLL DATA- - - -  > ADDITIONAL PAYMENTS- - - -  >WAGE TYPES- - - -  >CHECK WAGE TYPE CATALOG- - - -  >Check wage type characteristics
    Last step of the both set you ( V_T511) have to define the indirect valuation method ( PRZNT, SUMME Etc)
    Don't forget to maintain V_T539J, the place where you defining your component is a percentage of another component

  • How to Create new Lookup Type and look up codes within it.

    Hi,
    I need to create a Poplist.
    I want the View Object(to be associated with the poplist) to fetch the value from a new look up type and lookup codes as mentioned below.
    How to create these in the APPS?
    Lookup Type
    RATINGS
    LookupCode Meaning
    A Very Good
    B Good
    C Satisfactory
    D Bad
    Please tell me how can i create the above mentioned Lookup Type and codes ?
    thanks,
    Gowtam

    I have one more doubt regarding the AM to be associated with the poplist and that with the page and choice box within it.
    The ViewObject for the poplist belongs to the package <xyz>.oracle.apps.employee.poplist.server.
    My questions are
    1.What should be the AM property for PageLayoutRN?
    - is it oracle.apps.fnd.server.OAApplicationModule(as in HelloWorld)
    OR
    - is it <xyz>.oracle.apps.employee.poplist.server (view objects AM)
    2.What should be the AM property for the Choice?
    - do I need to assign it to <xyz>.oracle.apps.employee.poplist.server
    OR
    - leave it blank?
    Please clarify my doubts.
    Thanks,
    Gowtam

  • How to create new groups (list) for storing user's data?

    Hi,
    I'm using cq-5.4 and I was undertaking the campaign management tutorial which explains about how to send out a weekly news letter. As a part of that I was creating a sign up form for subscribers to fill out. So after filling up that form, user's data would get stored somewhere and eventually that data will be used while sending out the weekly news letters to him.
    This was the link I was referring to for that,
    http://dev.day.com/docs/en/cq/5-4/wcm/campaigns.html#Create a Sign Up Form
    So on that link, the 3rd screenshot talks about how to set the form action. They have for example set the form action to 'Create and Update Account' and accordingly under 'Action Configuration', 'geometrixx newsletter' is assigned as the 'Initial Group'. But they never talked about how to create the 'geometrixx-newsletter' group? Where to create that group etc. Hence, after completing the form when I press submit, nothing happens. In reality whatever data I entered should've got stored in the 'geometrixx newsletter' group.
    So that is the place where I'm stuck. Can someone tell me how and where should i create this group?
    Thanks!

    Hi,
    Thank you for posting the screen shots I have been unsuccessful in determining exactly where the problem is coming from. Would it be possible for you to post the actual VI so that I can work with it so see if I can reproduce this issue using your code? In regard to your questions:
    1.    You are correct 1000 samples read should write 1000 samples to the table
    2.    I believe the discrepancy is due to amount of manipulation done between the read and the file write but I cannot be certain, without the code to work with.
    3.     I am unclear as to exactly what is happening. If you are reading empty channels then you may receive erroneous readings this is to be expected. When you connected your accelerometer did you connect in RSE or differential? You can also manipulate the signal range with will affect the gain setting, how off are the readings?
    JaceD
    Signal Sources Product Support Engineer
    National Instruments

  • IMG settings after creating new output type for a purchase order smartform

    Hi all,
    Do I need to make changes in IMG after creating a new output type in NACE for a purchase order smartform?
    I have customized a purchase order smartform according to the requirements and copied an existing output type and assigned the custom form name.
    When I am trying to create a purchase order to test it, I am going to the message tab for assigning the output type and if I press F4 on the output type field or if I give the copied output type there, it says output type is not defined.
    Do I need to make any changes in SPRO?
    Regards,
    Anik

    Yes. You have to add the new output type to the proper message determination schema.
    Go to the IMG and select Materials Management -> Purchasing -> Messages -> Output control -> Message determination schemas -> Define message schema for purchase order -> Maintain Message Determination Schema: Purchase Order.
    Select the proper schema, then Control Data and insert your new output type into the schema (eventually with any requirement that may be necessary... you probably want to use 101 like in case of the regular NEU message).
    This should do it.

  • How to create new text type in PLMD_AUDIT

    Hi All,
    I need to create new text fields in addition to the existing Text types in Audit Management screen for all the audit components in the TEXT TAB in transaction PLMD_AUDIT.
    guide me.
    With Regards,
    San Rao

    Hi san. rao
    If you need to create that, you need to go ABAP development. In sap Audit management is not a sophasticated tool for all kind of audits. In the Audit component only you will find the extra text type Audit location. other than that you will find description and note.
    thanks &regards.,
    kamal

  • How to create new bol object  for  BT in sap crm

    HI
         I need to create new bol for BT with relationship  with out using AET ,Could you please explain step by step.
    Thanks and best regards
    Brahmaiah

    Hi Kariyath,
    I suppose its not about interest but a MUST.. sorry but.. unless u include the Logic in the program how can SAP pick these custom Z objects ?
    after u create them and assign to a Tcode in SU24 there is no logic to check these objects. Frankly i see no other chance.... unless SAP comes to us with a great easy way to input these Custom objects
    Keep looking and please Update me if u have any Inputs....on this front..
    All the Best
    Br,
    Sri
    Award points for helpful answers

Maybe you are looking for

  • Can't Restore Gen 1 iPod Touch - Serial Number n/a and Unknown Error 1

    I had just bought a Gen 1 iPod Touch off of eBay. It is said to be fully functional and was restored to factory settings. It also appears to be in great shape (just as it was claimed to be). When I plugged it to my PC and it said, "iTunes has detecte

  • DNS Domain name ISE 1.2

    Question:  Can the DNS domain name in ISE 1.2 be differnt from the AD domain that ISE is joined to? Situation:  I have an internal AD domain 'mydomain.local'.  Currently ISE is setup with mydomain.local as it's dns domain it's FQDN is isebox.mydomain

  • IPhoto problem with downloading pics. "iPhoto already running"

    When I try to download photos from my camera into iPhoto, I get a Caution message saying "iPhoto is already running. Only one copy can be rrunning at a time". When I click OK, this turns off iPhoto app and I can't get in to download pics. Also, the m

  • Multi-touch and Multi-screen

    I just saw the presentations of the PDC2008 (via the net since I couldn't make it to the PDC). It's nice to see that we can add multi-touch functionality to a native, unmanaged application, just handling WM_TOUCH, similar to WM_MOUSE events at this m

  • Problems putting published director files into dreamweaver

    Hi, Im a recently graduated Graphic Designer and I'm on my first job creating a website for a printing company. Anyway the issues im having are, ive created a small interactive director movie to go on the home page, it has the same kind of feel to th