How to create new agent types in transaction CBIH92.
Hi guru's,
Can anybody tell me how i can create new agent types .
thanks and regards,
Pronoy.
Hi Pronoy
Agent types are not created in CBIH92, those have to be created in IMG setting as per following path
SPRO --> Environment, Health and Safety --> Industrial Hygiene and Safety --> Risk Assessment --> Specify Agent types
Hope it will help you.
Regards
Vikram
Similar Messages
-
How to create new project in SPRO Transaction
How to create new project in SPRO Transaction
I need to attach my program Transaction code under the created project.
Please help me how to do?
Regards,
PurshothUse SIMGH transaction.
-
How to Create New Activity Type for Assiged to work centre Costing in Acti
Dear Sir,
We have four activity type to assigned in workcentre Costing Activity. Details are as under
AIRJET 2010 AIRJET
DONIER 2010 DORNIER
SULTEX 2010 SULTEX
SULZER 2010 SULZER
in addition one more loom is comming in our unit and require new activity type.
How can i create new.
Please guide.
Thanks in advance
Regards
AjitDear ,
To create new Activity Type , you need to follow the below steps :
KA01 - Create Primary Cost Element for the new activities type.
KL01 - Create Activity Type tied to the primary cost element.
KP26 - Change Activity Type/Activity Price Planning - maintain the Variable price
Assign the activity type to cost center using T code KP26.
In the input screen of T code KP26 ,enter version as 0, from period 1 and to period as 12 and the Fiscal Year as 20xx.
Click on Overview tab on top and key in costing details in this screen.
After performing this ,while creating the work center ,this combination of activity type & cost center should be assigned.
At work centre level , you should have
1.Create Standrad Value Key -OP19 and Formula Key in OP49.
2.Create Formula Parameters in OP7B or u can use existing one to assing in the Standard Value Key
3.In CR02-Assing the Standard value key in Basic Data and select the Formula Key in Costing tab with cost centre assingement .Save
Try and check
Regards
JH -
How to create new authorisation object for Transactions?
Hi,
How to create new authorisaton object and how to assign that object on a transaction code?
Case ->
The transaction code VL01N have the object called V_LIKP_VST under Class "LE_V" that have two auth. fields. one is 'Activity' and other one is "Shipping Point/Receiving Point".
Here I want to add "Storage location" also. I have created one object called "Z_LIKP_VST" under same calass "LE_V". and added "Activity", "Shipping Poing/Receiving Poing" and "Storage Location". After that I added that object ("Z_LIKP_VST") for particular transaction through "SU24". I maintained the "Display check indicator" for VL01N.
I created one new role and assigend the particular transacation for a user. but still SAP taking V_LIKP_VST insted of Z_LIKP_VST.
How can I change my Z_LIKP_VST on profile.
Please help
Thanks in Advance
LalHi Kariyath,
I suppose its not about interest but a MUST.. sorry but.. unless u include the Logic in the program how can SAP pick these custom Z objects ?
after u create them and assign to a Tcode in SU24 there is no logic to check these objects. Frankly i see no other chance.... unless SAP comes to us with a great easy way to input these Custom objects
Keep looking and please Update me if u have any Inputs....on this front..
All the Best
Br,
Sri
Award points for helpful answers -
How to create new text type in PLMD_AUDIT
Hi All,
I need to create new text fields in addition to the existing Text types in Audit Management screen for all the audit components in the TEXT TAB in transaction PLMD_AUDIT.
guide me.
With Regards,
San RaoHi san. rao
If you need to create that, you need to go ABAP development. In sap Audit management is not a sophasticated tool for all kind of audits. In the Audit component only you will find the extra text type Audit location. other than that you will find description and note.
thanks ®ards.,
kamal -
How to Create new Lookup Type and look up codes within it.
Hi,
I need to create a Poplist.
I want the View Object(to be associated with the poplist) to fetch the value from a new look up type and lookup codes as mentioned below.
How to create these in the APPS?
Lookup Type
RATINGS
LookupCode Meaning
A Very Good
B Good
C Satisfactory
D Bad
Please tell me how can i create the above mentioned Lookup Type and codes ?
thanks,
GowtamI have one more doubt regarding the AM to be associated with the poplist and that with the page and choice box within it.
The ViewObject for the poplist belongs to the package <xyz>.oracle.apps.employee.poplist.server.
My questions are
1.What should be the AM property for PageLayoutRN?
- is it oracle.apps.fnd.server.OAApplicationModule(as in HelloWorld)
OR
- is it <xyz>.oracle.apps.employee.poplist.server (view objects AM)
2.What should be the AM property for the Choice?
- do I need to assign it to <xyz>.oracle.apps.employee.poplist.server
OR
- leave it blank?
Please clarify my doubts.
Thanks,
Gowtam -
How to create new Wage type specifically for IT14 and IT15 only
Hi Gurus,
I was assigned to create a new wage type to be used for Infotypes 14 and 15 only.
Another thing is to have this for % deduction rather than having a fixed amount ($).
Appreciate all your help.
thanks!FOR IT0014
PM - - - - > PA- - - - >PAYROLL DATA- - - - > RECURRING PAYMENTS AND DEDUCTIONS- - - - >WAGE TYPES- - - - >CREATE WAGE TYPE CATALOG
PM - - - - > PA- - - - >PAYROLL DATA- - - - > RECURRING PAYMENTS AND DEDUCTIONS- - - - >WAGE TYPES- - - - >Check wage type group 'Recurring Payments and Deductions
PM - - - - > PA- - - - >PAYROLL DATA- - - - > RECURRING PAYMENTS AND DEDUCTIONS- - - - >WAGE TYPES- - - - >CHECK WAGE TYPE CATALOG- - - - >CHECK ENTRY PERMISSIBILITY PER INFOTYPE
PM - - - - > PA- - - - >PAYROLL DATA- - - - > RECURRING PAYMENTS AND DEDUCTIONS- - - - >WAGE TYPES- - - - >CHECK WAGE TYPE CATALOG- - - - >Define Wage Type Permissibility for each PS and ESG
PM - - - - > PA- - - - >PAYROLL DATA- - - - > RECURRING PAYMENTS AND DEDUCTIONS- - - - >WAGE TYPES- - - - >CHECK WAGE TYPE CATALOG- - - - >Check wage type characteristics
FOR IT0015
PM - - - - > PA- - - - >PAYROLL DATA- - - - > ADDITIONAL PAYMENTS- - - - >WAGE TYPES- - - - >CREATE WAGE TYPE CATALOG
PM - - - - > PA- - - - >PAYROLL DATA- - - - > ADDITIONAL PAYMENTS- - - - >WAGE TYPES- - - - >Check wage type group ADDITIONAL PAYMENTS
PM - - - - > PA- - - - >PAYROLL DATA- - - - > ADDITIONAL PAYMENTS- - - - >WAGE TYPES- - - - >CHECK WAGE TYPE CATALOG- - - - >CHECK ENTRY PERMISSIBILITY PER INFOTYPE
PM - - - - > PA- - - - >PAYROLL DATA- - - - > ADDITIONAL PAYMENTS- - - - >WAGE TYPES- - - - >CHECK WAGE TYPE CATALOG- - - - >Define Wage Type Permissibility for each PS and ESG
PM - - - - > PA- - - - >PAYROLL DATA- - - - > ADDITIONAL PAYMENTS- - - - >WAGE TYPES- - - - >CHECK WAGE TYPE CATALOG- - - - >Check wage type characteristics
Last step of the both set you ( V_T511) have to define the indirect valuation method ( PRZNT, SUMME Etc)
Don't forget to maintain V_T539J, the place where you defining your component is a percentage of another component -
How to create new relationships in the BP transaction
Hi ,
I am very much newto CRM.I have got one requirment to create the relationships in BP transaction.
After entering the BP transaction ,I have to select the Organisation in the FIND field then i need to select the BP number.After displaying the BP number i need to select display in BP role As 'Client'.Then in the indentification Tab i will get the value for inustry sector.I need to focus my cursor on industry sector the i will press relationships button.
In relationship button i will get 4 tabs 1) Overview2)Has employee3)Has Managing Partner relationships4)Has senior relationship partner.
Here in the relationship i need to add 3 more tabs with 1)sector leader2)sector manager3)cluster leader.
So how i need to add new relationship tab eaither i need to do this with config or with program i need to handle.Please suggest me.
Thanks.To create new relationship types goto transaction BUBA. There you can easily create your new 3 types with minimum customazing effort.
Regards. -
How to create new RF transaction in R/3?
Hi Guys,
Can anyone tell me how to create new RF transaction In WM. If possible step by step.
Thanks heeps.
NarahariHi again,
well if you need it for an infoObject ZMATERIAL,
Create the infoObject ZMATERIAL with reference to 0MATERIAL and you will have all 0MATERIAL hierarchies available for ZMATERIAL.
Nothing additional necessary.
The creation of similar Hierarchy-Extractors in R/3 is, as far as i know, not possible.
The proper order for the FF-Elements when uploading the self-defined hierarchy depends on the hierarchy-settings in the DataSource, for instance for sorted hierarchies:
Node ID NODEID NUMC 8
InfoObject Name INFOOBJECT CHAR 30
Node Name NODENAME CHAR 32
Link Name LINK CHAR 1
Parent Node PARENTID NUMC 8
First Subnode CHILDID NUMC 8
Next Node Along NEXTID NUMC 8
Language Key LANGU CHAR 1
Description - Short TXTSH CHAR 20
Description - Medium TXTMD CHAR 40
Description - Long TXTLG CHAR 60
Look also for the Function module for the FTP in se38 by FTP.
hth
cheers
sven -
Creation of new movement type and transaction code
Hi
As per my business requirement i want to create new movement type 911 in 1M and how to assign to transaction code MIGO and if possible can some body can guide me with configuration.
With regards
G Narendra kumarHi Narendra,
1 . To copy a movement type,
select the field Movement type and choose Continue. The dialog box
Define work area appears.
2. In the dialog box Define work area, enter the movement type you want
to copy in the From: field. In the To: field, enter the name of the
new movement type you want to create. To go to the overview of the
selected movement types, choose Continue .
3. Select the movement type you want to copy, and choose Edit -> Copy
as.
Overwrite the selected movement type with the new movement type
(beginning with 9, X, Y, or Z) and copy all dependent entries.
The system copies all control indicators from the reference movement
type to the new movement type.
4. Copy the reversal movement type and enter it in the view
Reversal/follow-on movement types.
5. In SE38, execute the program RDDKOR54 and then give the entry T156 as table name and again execute. Check if the entries 9,Y, and Z* are available in the namespace.
Thanks
Dipak -
How to create the sub type field in hr abap infotype
hi ,
how to create the sub type field in hr abap infotype.
regards,
venkat.Try like this also
creating of infotype please follow these steps ...
Step 1: Create Infotypes
i. Goto Transaction PM01 To create Infotypes:
ii. Enter the Infotype Number and say create all.
iii. The following message would display:
i. PSnnnn Does not exist. How do you want to proceed?
iv. Click
v. A maintain Structure screen appears.
Fill in the short text description and the PS structure of the Infotype.
Since the fields Personnel No, Employee Begin Date, End Date, Sequential Number,Date of Last Change, Name of user who changed the object are available in the PAKEY and PSHD1 structure, define the PSnnnn structure with only the fields you required.
vi. Once the PS Structure is created, save and activate the structure.
vii. In the initial screen of PM01, now click on .
Create a new entry for the infotype.
Fill in the values as mentioned below and save.
Infotype Characteristics:
Infotype Name of the infotype_ Short Text: __Short Description________
*General Attributes :
Time constraint = 1
Check Subtype Obligatory
Display and Selection:
Select w/ start = 3 Valid record for entered data
Select w/ end = 5 Records with valid dates within the period entered
Select w/o date = 6 Read all records
Screen header = 02 Header ID
Create w/o end = 1 Default value is 31.12.9999
Technical Data:
Single screen = 2000
List screen = 3000; List Entry Checked.
viii. In the initial screen of PM01, now click on .
Choose the infotype entry in the list.
Fill in the values as mentioned below and save.
Technical Attributes:
In tab section,
The following attribute values are given:
Applicant DB Tab = PAnnnn Infotype Name
Subtype field = SUBTY
Subtype table = T591A
Subty.text tab. = T591S
Time cnstr.tab. = T591A
Prim. /Sec. = I Infotype
Period/key date = I Interval
and .
ix. Infotype Screen Modification:
Edit Screen 2000 from PM01 for the Infotype.
ABAP Editor for the Infotype Program MPnnnn00 will be displayed.
Click . Flow Logic will be displayed. There string coding of your own logic.
Regards
Pavan -
How to create new account determination in OBYC
Dear SAP Guru,
I'm getting error 'Maintain account determination (table T030B) for posting ST3' upon GR (posting) against PO. I noticed name of the procedure or group of procedures for which automatic postings can be generated is NOT maintain for ST3 in OBYC (Maintain FI Configuration : Automatic Posting - Procedure). Appreciate if you could show me the path or t/code how to create new procedure for ST3 & maintain in OBYC. Thank you.
rgds,
nanthaHello Nantha,
Transaction key can be created in
SPRO - MM - Purchasing - Conditions - Define Proce determination Process - Define transaction/event key
Here go for new entries and maintain the transaction key with a description.
Then go to M/08 and maintain the transaction key in the 'acct key' field for your pricing procedure and the condition type.
Also make sure to tick the 'Accruals' tickbox in M/06 for the condition type you want to post in the account key.
Now go to OBYC and maintain the G/L accounts along with the posting keys and the posting rules as explained in my previous reply.
Regards
Gregory Mathews -
How to create new actions ? in the interaction record screen
Hi all,
I'm working with the IC web client.
In the interaction record screen the is a link to actions.
But how to create new actions ? schedule actions ?
Component "ICCMP_BT_INR"
View "InrHeaderViewSet"Hi Eran,
Gret is absolutely right ..The actions are transaction type specific and can be attached along in the customizing as mentioned above by gret , these can then be tested in the SAP gui first for their scheduled and start conditions and then in the ICWC.
There is no special settings for actions in ICWC if they are there in your transaction they will come in the ICWC.
Hope this helps
Regards
Raj -
Hello Gurus,
Can anyone tell me how from SPRO I can create new "inquiry types" related to the transaction VA11 so that I can chose them from a drop down list using the F4 mode?
Many thanks
ChrisGoto SPRO-> Sales and distribution -> Sales->Sales document header ->Define sales document type.
Then hightlight the document type IN and click on the copy button on the top.
Rename to Z-document type like ZIN and then save.
Now check in VK11, you can find the new document type. You have to first configure in SAP development system and then after testing you need to move to other systems.
Regards -
How to create new XML file using retreived XML content by using SAX API?
hi all,
* How to create new XML file using retreived XML content by using SAX ?
* I have tried my level best, but output is coming invalid format, my code is follows,
XMLFileParser.java class :-
import java.io.StringReader;
import java.io.StringWriter;
import javax.xml.transform.OutputKeys;
import javax.xml.transform.Transformer;
import javax.xml.transform.TransformerConfigurationException;
import javax.xml.transform.TransformerException;
import javax.xml.transform.TransformerFactory;
import javax.xml.transform.dom.DOMResult;
import javax.xml.transform.sax.SAXSource;
import javax.xml.transform.sax.SAXTransformerFactory;
import javax.xml.transform.sax.TransformerHandler;
import javax.xml.transform.stream.StreamResult;
import org.w3c.dom.Document;
import org.xml.sax.Attributes;
import org.xml.sax.InputSource;
import org.xml.sax.SAXException;
import org.xml.sax.helpers.XMLFilterImpl;
public class PdfParser extends XMLFilterImpl {
private TransformerHandler handler;
Document meta_data;
private StringWriter meta_data_text = new StringWriter();
public void startDocument() throws SAXException {
void startValidation() throws SAXException {
StreamResult streamResult = new StreamResult(meta_data_text);
SAXTransformerFactory factory = (SAXTransformerFactory) SAXTransformerFactory.newInstance();
try
handler = factory.newTransformerHandler();
Transformer transformer = handler.getTransformer();
transformer.setOutputProperty(OutputKeys.ENCODING, "UTF-8");
transformer.setOutputProperty(OutputKeys.INDENT, "yes");
handler.setResult(streamResult);
handler.startDocument();
catch (TransformerConfigurationException tce)
System.out.println("Error during the parse :"+ tce.getMessageAndLocation());
super.startDocument();
public void startElement(String namespaceURI, String localName,
String qualifiedName, Attributes atts) throws SAXException {
handler.startElement(namespaceURI, localName, qualifiedName, atts);
super.startElement(namespaceURI, localName, qualifiedName, atts);
public void characters(char[] text, int start, int length)
throws SAXException {
handler.characters(text, start, length);
super.characters(text, start, length);
public void endElement(String namespaceURI, String localName,
String qualifiedName) throws SAXException {
super.endElement("", localName, qualifiedName);
handler.endElement("", localName, qualifiedName);
public void endDocument() throws SAXException {
void endValidation() throws SAXException {
handler.endDocument();
try {
TransformerFactory transfactory = TransformerFactory.newInstance();
Transformer trans = transfactory.newTransformer();
SAXSource sax_source = new SAXSource(new InputSource(new StringReader(meta_data_text.toString())));
DOMResult dom_result = new DOMResult();
trans.transform(sax_source, dom_result);
meta_data = (Document) dom_result.getNode();
System.out.println(meta_data_text);
catch (TransformerConfigurationException tce) {
System.out.println("Error occurs during the parse :"+ tce.getMessageAndLocation());
catch (TransformerException te) {
System.out.println("Error in result transformation :"+ te.getMessageAndLocation());
} CreateXMLFile.java class :-
Sax.startDocument();
Sax.startValidation();
Sax.startElement("", "pdf", "pdf", new AttributesImpl());
Sax.startElement("", "basic-metadata", "basic-metadata", new AttributesImpl());
String xmp_str = new String(meta_data.getByteArray(),"UTF8");
char[] xmp_arr = xmp_str.toCharArray();
Sax.characters(xmp_arr, 0, xmp_arr.length);
Sax.endElement("", "pdf", "pdf");
Sax.endValidation();
Sax.endDocument();
Sax.endElement("", "basic-metadata", "basic-metadata");* In CreateXMLFile.java
class, I have retreived the xml content in the meta_data object, after that i have converted into character array and this will be sends to SAX
* In this case , the XML file created successfully but the retreived XML content added as an text in between basic-metadata Element, that is, retreived XML content
is not an XML type text, it just an Normal text Why that ?
* Please help me what is the problem in my code?
Cheers,
JavaImranSax.startDocument();
Sax.startValidation();
Sax.startElement("", "pdf", "pdf", new AttributesImpl());
Sax.startElement("", "basic-metadata", "basic-metadata", new AttributesImpl());
String xmp_str = new String(meta_data.getByteArray(),"UTF8");
char[] xmp_arr = xmp_str.toCharArray();
Sax.characters(xmp_arr, 0, xmp_arr.length);
</code><code>Sax.endElement("", "basic-metadata", "basic-metadata");</code>
<code class="jive-code jive-java">Sax.endElement("", "pdf", "pdf");
Sax.endValidation();
Sax.endDocument();
* I HAVE CHANGED MY AS PER YOUR SUGGESTION, NOW SAME RESULT HAS COMING.
* I AM NOT ABLE TO GET THE EXACT OUTPUT.,WHY THAT ?
Thanks,
JavaImran{code}
Maybe you are looking for
-
I have a macbook pro (i7) 13'', everything was working properly, but out of a sudden the keyboard is dead & won't respond to anything, now I can't login. I restarted it many times but still the same problem. Any suggestions??!!! help me out plssss. T
-
Custom Report generation in the Simple UserInterface
Hello, I've created a workspace, a project and some sequences in TestStand 4.0. I've also created a custom report generation. This all works fine in TestStand. The custom report file is a txt file. The custom report generation is chosen above the def
-
HT4623 I can't use my phone after it updated
After I updatedand backed up my phone. It said there was a problem. Should I restore to original settings?
-
Regarding my iPad2 32 wifi - 3G. During update of system iOS files today (approx 650mb), there popped up an error message in iTunes saying something like (error during update, and some more info i didnt see) before it left the screen. Now my ipad is
-
i have already posted a question and you send a answer to my mail and them i am updated flash plater but is still showing an error in youtube but in other browsers those liks are working