How to create new control palette?

i want to create a new control palette,how to do it?

When in labview bring up the control pallete and tack it down. Next hit the button beside the search key at the top. Then hit edit palletes. You can then start a new setup if you'd like.

Similar Messages

  • How to create new storage group and mailbox database on exchange 2007 CCR

    Hi, Our Environment:
    Exchange 2007 SP3 CCR.
    Now I want to create a new storage group with edb file and log files on the new drive.
    My plan is as below:
    Once we have new drive ready on both active node and passive node,
    1): Create new storage group with log files for this new storage group on other new drive from Active Node.
    2): Create new mailbox database under this newly created storage group with the DB file on the new drive from active node.
    My question is:
    1): Do I need to perform above steps from active node only? or Do I need to do it from both active node and passive node?
    2): How many storage groups can we create on one Exchange 2007 Enterprise server, we already have 25 SGs in place.
    Thanks in advance.

    Hi,
    Here are my answers you can refer to:
    1. We can just create new storage group on the active node. And it’ll be replicated to the passive node.
    We can use the following command in EMS to verify the new Storage Group is being replicated to the passive node:
    Get-StorageGroupCopyStatus "Second Storage Group" | Select SummaryCopyStatus,CCRTargetNode
    http://exchangepedia.com/blog/2007/08/how-to-create-new-storage-group-in-ccr.html
    2. For Exchange 2007 enterprise version, we can have up to 50 storage groups:
    http://www.computerperformance.co.uk/exchange2007/exchange2007_storage_groups.htm
    Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
    sure that you completely understand the risk before retrieving any suggestions from the above link.
    If you have any question, please feel free to let me know.
    Thanks,
    Angela Shi
    TechNet Community Support

  • How to create new layers in captivate?

    Hi,
    how to create new layers in captivate's timeline?
    Regards,
    krishnaraj

    Hi krishnaraj
    Sounds like you may be expecting Captivate to work
    identically to Flash. Sorry my friend, it doesn't work this way.
    For starters, notice that Captivate uses slides.
    Each slide has its own timeline. So what you see in the timeline
    area is not for the whole movie.
    As you add objects (Buttons, Click Boxes, Images, Rollover
    Areas, Etc.) the object is placed on the timeline and assumes what
    you are referring to as a layer. You then control which object is
    in front of another object by its relative position in the layer.
    This is called the "Stacking Order".
    Hopefully this helps... Rick

  • How to create table control without wizard....???

    Hello experts !!
    Plz tell me how to create table control without wizard.
    for sflight table.
    Scenario 1
    I have one screen like 1000.
    There i have taken carrid, connid, fldate as criteria.
    Now i want to display Planetype, Price, Seatsmax in the table control.
    Scenario 2
    i have two screens 1001, 1002.
    in the screen 1001 i have taken carrid, connid, fldate as criteria and there is a Button.
    when i will click the button it will show the price, planetype and seatsmax in the table control in the next screen, i.e 1002
    plz help me out...
    and how to save new record in the dictionary table from that table control....

    Hi
    see the sample programs and design accordingly
    syntax:
    CONTROLS .
    if you only want to determine the row of the table control. SY´-SUBRC allows you to check if the cursor is placed in a row of a table control.
    u need to comment the performs of table control fields and write ur own perform statements. And u have to declare the table control fields as separate internal tables.
    Go through this urls.
    www.****************
    www.sap-img.com
    Check the below links.
    just refer to the link below
    http://www.sapmaterial.com/tablecontrol_sap.html
    step by step procedure with screen shots
    http://www.planetsap.com/howdo_a.htm
    http://help.sap.com/saphelp_nw2004s/helpdata/en/9f/dbac5135c111d1829f0000e829fbfe/content.htm
    http://sap.niraj.tripod.com/id25.html
    Also you can see the below examples...
    Go to se38 and give demodynpro and press F4.
    YOu will get a list of demo module pool programs.
    One more T-Code is ABAPDOCU.
    YOu can find more examples there.
    See the prgrams:
    DEMO_DYNPRO_TABLE_CONTROL_1 Table Control with LOOP Statement
    DEMO_DYNPRO_TABLE_CONTROL_2 Table Control with LOOP AT ITAB
    http://www.geocities.com/ZSAPcHAT
    http://www.allsaplinks.com/files/using_table_in_screen.pdf
    Regards
    Anji

  • How to create new scope for SharePoint calendar?

    How to create new scope for SharePoint calendar?
    I have a calendar list to which I want to create following scopes-
    Annual View
    Half Year 1 (Jan-June)
    Half Year 2 (Jul-Dec)
    Quarter 1 (Jan-Mar)
    Quarter 2 (Apr-Jun)
    Quarter 3 (Jul-Sep)
    Quarter 4 (Oct-Dec)
    How this can be created. Any help appriciated. Thanks.

    Hi Pratima,
    Can you please see below link and code snippet for how to
     format date in gridview.
    http://www.aspdotnet-suresh.com/2011/05/how-to-set-date-format-in-gridview.html
    <html xmlns="http://www.w3.org/1999/xhtml">
    <head runat="server">
    <title>Gridvew Date format</title>
    </head>
    <body>
    <form id="form1" runat="server">
    <div>
    <asp:GridView runat="server" ID="gvdetails" DataSourceID="dsdetails" AllowPaging="true" AllowSorting="true" AutoGenerateColumns="false">
    <RowStyle BackColor="#EFF3FB" />
    <FooterStyle BackColor="#507CD1" Font-Bold="True" ForeColor="White" />
    <PagerStyle BackColor="#2461BF" ForeColor="White" HorizontalAlign="Center" />
    <HeaderStyle BackColor="#507CD1" Font-Bold="True" ForeColor="White" />
    <AlternatingRowStyle BackColor="White" />
    <Columns>
    <asp:BoundField DataField="Date1" HeaderText="Date1" HtmlEncode="false" DataFormatString="{0:s}" />
    <asp:BoundField DataField="Date2" HeaderText="Date2" HtmlEncode="false" DataFormatString="{0:D}" />
    <asp:BoundField DataField="Date3" HeaderText="Date3" HtmlEncode="false" DataFormatString="{0:m}" />
    <asp:BoundField DataField="Date4" HeaderText="Date4" HtmlEncode="false" DataFormatString="{0:d}" />
    <asp:BoundField DataField="Total" HeaderText="Total" HtmlEncode="false" DataFormatString="{0:C2}" />
    </Columns>
    </asp:GridView>
    <asp:SqlDataSource ID="dsdetails" runat="server" SelectCommand="select * from DateFormat" ConnectionString="<%$ConnectionStrings:dbconnection %>"></asp:SqlDataSource>
    </div>
    </form>
    </body>
    </html>
    Hope this will help you.
    Regards
    Soni K

  • How to create new XML file using retreived XML content by using SAX API?

    hi all,
    * How to create new XML file using retreived XML content by using SAX ?
    * I have tried my level best, but output is coming invalid format, my code is follows,
    XMLFileParser.java class :-
    import java.io.StringReader;
    import java.io.StringWriter;
    import javax.xml.transform.OutputKeys;
    import javax.xml.transform.Transformer;
    import javax.xml.transform.TransformerConfigurationException;
    import javax.xml.transform.TransformerException;
    import javax.xml.transform.TransformerFactory;
    import javax.xml.transform.dom.DOMResult;
    import javax.xml.transform.sax.SAXSource;
    import javax.xml.transform.sax.SAXTransformerFactory;
    import javax.xml.transform.sax.TransformerHandler;
    import javax.xml.transform.stream.StreamResult;
    import org.w3c.dom.Document;
    import org.xml.sax.Attributes;
    import org.xml.sax.InputSource;
    import org.xml.sax.SAXException;
    import org.xml.sax.helpers.XMLFilterImpl;
    public class PdfParser extends XMLFilterImpl {
        private TransformerHandler handler;
        Document meta_data;
        private StringWriter meta_data_text = new StringWriter();
        public void startDocument() throws SAXException {
        void startValidation() throws SAXException {
            StreamResult streamResult = new StreamResult(meta_data_text);
            SAXTransformerFactory factory = (SAXTransformerFactory) SAXTransformerFactory.newInstance();
            try
                handler = factory.newTransformerHandler();
                Transformer transformer = handler.getTransformer();
                transformer.setOutputProperty(OutputKeys.ENCODING, "UTF-8");
                transformer.setOutputProperty(OutputKeys.INDENT, "yes");
                handler.setResult(streamResult);
                handler.startDocument();
            catch (TransformerConfigurationException tce)
                System.out.println("Error during the parse :"+ tce.getMessageAndLocation());
            super.startDocument();
        public void startElement(String namespaceURI, String localName,
                String qualifiedName, Attributes atts) throws SAXException {
            handler.startElement(namespaceURI, localName, qualifiedName, atts);
            super.startElement(namespaceURI, localName, qualifiedName, atts);
        public void characters(char[] text, int start, int length)
                throws SAXException {
            handler.characters(text, start, length);
            super.characters(text, start, length);
        public void endElement(String namespaceURI, String localName,
                String qualifiedName) throws SAXException {
            super.endElement("", localName, qualifiedName);
            handler.endElement("", localName, qualifiedName);
        public void endDocument() throws SAXException {
        void endValidation() throws SAXException {
            handler.endDocument();
            try {
                TransformerFactory transfactory = TransformerFactory.newInstance();
                Transformer trans = transfactory.newTransformer();
                SAXSource sax_source = new SAXSource(new InputSource(new StringReader(meta_data_text.toString())));
                DOMResult dom_result = new DOMResult();
                trans.transform(sax_source, dom_result);
                meta_data = (Document) dom_result.getNode();
                System.out.println(meta_data_text);
            catch (TransformerConfigurationException tce) {
                System.out.println("Error occurs during the parse :"+ tce.getMessageAndLocation());
            catch (TransformerException te) {
                System.out.println("Error in result transformation :"+ te.getMessageAndLocation());
    } CreateXMLFile.java class :-
    Sax.startDocument();
    Sax.startValidation();
    Sax.startElement("", "pdf", "pdf", new AttributesImpl());
    Sax.startElement("", "basic-metadata", "basic-metadata", new AttributesImpl());          
    String xmp_str = new String(meta_data.getByteArray(),"UTF8");
    char[] xmp_arr = xmp_str.toCharArray();
    Sax.characters(xmp_arr, 0, xmp_arr.length);
    Sax.endElement("", "pdf", "pdf");
    Sax.endValidation();
    Sax.endDocument();
    Sax.endElement("", "basic-metadata", "basic-metadata");* In CreateXMLFile.java
    class, I have retreived the xml content in the meta_data object, after that i have converted into character array and this will be sends to SAX
    * In this case , the XML file created successfully but the retreived XML content added as an text in between basic-metadata Element, that is, retreived XML content
    is not an XML type text, it just an Normal text Why that ?
    * Please help me what is the problem in my code?
    Cheers,
    JavaImran

    Sax.startDocument();
    Sax.startValidation();
    Sax.startElement("", "pdf", "pdf", new AttributesImpl());
    Sax.startElement("", "basic-metadata", "basic-metadata", new AttributesImpl());          
    String xmp_str = new String(meta_data.getByteArray(),"UTF8");
    char[] xmp_arr = xmp_str.toCharArray();
    Sax.characters(xmp_arr, 0, xmp_arr.length);
    </code><code>Sax.endElement("", "basic-metadata", "basic-metadata");</code>
    <code class="jive-code jive-java">Sax.endElement("", "pdf", "pdf");
    Sax.endValidation();
    Sax.endDocument();     
    * I HAVE CHANGED MY AS PER YOUR SUGGESTION, NOW SAME RESULT HAS COMING.
    * I AM NOT ABLE TO GET THE EXACT OUTPUT.,WHY THAT ?
    Thanks,
    JavaImran{code}

  • How we create new data base in oracle 10g express edition

    hello every body.. i student of B tech n new user of oracle so please help me how we creat new data base in oracle 10g express edition

    Hello, Oracle XE can not create more than one instance, the other editions yes, but like other editions XE allows you to create database schemas, schemas logically grouped objects like tables, views, indexes created by a user. By creating an Oracle user is associated with a schema of the same name.
    Using SYS or system accounts for creating user accounts.
    Syntax to create a user:
    create user Your_user
    IDENTIFIED BY password
    default tablespace users;
    grant connect, resources to your_user;
    Edited by: rober584812 on Jun 25, 2010 9:03 PM

  • How to create new client in XI

    Hi all,
      Can any one guide me how to create new client in XI.

    Hi
    To set up a new client, follow these steps
    1) Create a client going in to the path
    <b>Tools->Administration ->Administration -> Client administration -> Client maintenance</b>
    or can also use TCODE <b>scc4</b>
    2)Login into the client with
    User: <b>DDIC</b> or <b>SAP*</b>
    Password
    For default password go thru this link
    http://help.sap.com/saphelp_nw04/helpdata/en/52/67179f439b11d1896f0000e8322d00/content.htm
    Regards
    Arpit Seth

  • How to create new or delete the existing row in the grid....

    hi my friends...
    i am developing report using Reuse_alv_grid_display...
    my requirement is... At runtime
              1.  i may create new row on the grid (empty row inwhich  i may enter the data).
              2.  i may delete a existing row in the grid
              3.  i may edit the existing data...
    then i have to trace the modification in the grid in one internal table...
    how can i get into this.....
    note:
    i have some idea to edit the existing record in the grid and trace those modification,
    but i don't know abt how to create new or delete the existing row....
    can you give me some idea...

    Hi deva,
    write a class which implemets these methods
    CLASS lcl_event_receiver DEFINITION.
      PUBLIC SECTION.
        METHODS:
    To handle the toolbar on alv
         handle_toolbar
           FOR EVENT toolbar OF cl_gui_alv_grid
              IMPORTING e_object e_interactive,
    To handle the buttons on the alv grid
         handle_user_command
           FOR EVENT user_command OF cl_gui_alv_grid
           IMPORTING e_ucomm.
    endclass.
    Now Implement these methods.
    CLASS lcl_event_receiver IMPLEMENTATION.
    To handle the toolbar on alv
      METHOD handle_toolbar.
       DATA ls_toolbar  TYPE stb_button.
        CLEAR gs_toolbar.
        MOVE 3 TO gs_toolbar-butn_type.
        APPEND gs_toolbar TO e_object->mt_toolbar.
        CLEAR gs_toolbar.
        PERFORM icon_create USING 'ICON_INSERT_ROW' gs_toolbar-icon.
        MOVE text-010 TO gs_toolbar-function.
        MOVE text-012 TO gs_toolbar-quickinfo.
        MOVE ' ' TO gs_toolbar-disabled.
        APPEND gs_toolbar TO e_object->mt_toolbar.
        CLEAR gs_toolbar.
        PERFORM icon_create USING 'ICON_DELETE_ROW' gs_toolbar-icon.
        MOVE text-011 TO gs_toolbar-function.
        MOVE text-013 TO gs_toolbar-quickinfo.
        MOVE ' ' TO gs_toolbar-disabled.
        APPEND gs_toolbar TO e_object->mt_toolbar.
      ENDMETHOD.
       METHOD handle_user_command.
    In this form, check the function code(e_ucomm has the function code), based on that do the required action.
    as i said yesterday(i.e for appending a row, deleting a row, modifying a row)
        PERFORM user_command USING e_ucomm.
      ENDMETHOD
    endclass.
    Before calling the alv method, create a object of this class.
    DATA :
          gref_event_receiver  TYPE REF TO lcl_event_receiver,
          gv_tables_alv          TYPE REF TO cl_gui_alv_grid.
          CREATE OBJECT gref_event_receiver.
          SET HANDLER   gref_event_receiver->handle_user_command
                        FOR gv_tables_alv.
          SET HANDLER   gref_event_receiver->handle_toolbar
                        FOR gv_tables_alv.
    check this program for event handling, it is the similar way
    demo_abap_objects_events
    Hope u understood this.
    Regards,
    Prasant
    reward if helpful

  • How to create new .dat file and its contents?

    Hi There
    Can anybody let me know the procedure of how to create new .ctl or .dat file to load data to tables.
    i working on 2day dba chapter 8. it shows me how to creat table and use .dat file to load data. but doesnot giv any clue how new .dat file and its contents can be created. please help.
    thanks in advance.

    Thanks for ur help
    I ve created txt file in notepad and saved it as dat file. tried to load that data thru Enterprise manager. used load data from User files everything went well and job was showing suceeded but dont know why that data is not showing in the table. i ve tried it now for three four times. used right table and pathe but dont know. has anybody got idea why that ll be?
    Thanks

  • How to Create a Control In Notepad

    Hello:
    I am need help creating a control file. I have never done this before. I have to load the following script into notepad:
    load data
    infile 'names.txt'
    badfile 'names.bad'
    truncate
    into table names
    fields terminated by ','
    trailing nullcols
    (first,last)
    I then went to Command Prompt to begin the SQL Loader command and recieved the following message.
    SQL*Loader-500: Unable to open file (names.ctl)
    SQL*Loader-553: file not found
    SQL*Loader-509: System error: The system

    DUPLICATE post
    How to Create a Control In Notepad

  • How to create new account determination in OBYC

    Dear SAP Guru,
    I'm getting error 'Maintain account determination (table T030B) for posting ST3' upon GR (posting) against PO. I noticed name of the procedure or group of procedures for which automatic postings can be generated is NOT maintain for ST3 in OBYC (Maintain FI Configuration : Automatic Posting - Procedure). Appreciate if you could show me the path or t/code how to create new procedure for ST3 & maintain in OBYC. Thank you.
    rgds,
    nantha

    Hello Nantha,
    Transaction key can be created in
    SPRO - MM - Purchasing - Conditions - Define Proce determination Process - Define transaction/event key
    Here go for new entries and maintain the transaction key with a description.
    Then go to M/08 and maintain the transaction key in the 'acct key' field for your pricing procedure and the condition type.
    Also make sure to tick the 'Accruals' tickbox in M/06 for the condition type you want to post in the account key.
    Now go to OBYC and maintain the G/L accounts along with the posting keys and the posting rules as explained in my previous reply.
    Regards
    Gregory Mathews

  • How to create new OC4J instance in AS 10.1.3 with BC4J- and ADF-Libraries

    Hi
    I have done all the steps mentioned in this thread:
    How to create new OC4J instance in AS 10.1.3
    However, the new created OC4J instance obviously misses some libraries. If I deploy my Application to this OC4J I get an internal error: Class not found: oracle.jbo.JboException.
    The same Application runs well in the "home" Instance.
    What is the trick, to create a new OC4J instance, which more or less behaves the same way as the "home" instances (and especially has all the same libraries)?
    Thanks for your help
    Frank Brandstetter

    I encountered this last month. I definitely agree that it is a glaring omission to not have "Create Like" functionality when instantiating new containers. Here's my notes on the manual steps required after using createinstance to create the fresh container. Not too bad. I've been deploying ADF applications to the new container with no problems after this.
    ==============
    The default (home) OC4J container is pre-configured for ADF 10.1.3 applications; however, when $ORACLE_HOME/bin/createinstance is used to create additional containers, these containers are not configured automatically to host ADF 10.1.3 applications.
    I followed these manual steps:
    1. $ORACLE_HOME/j2ee/home/config/server.xml defines three shared libraries that "install" the needed JARs for Oracle ADF applications in your application server instance (container). Note that "install" does not necessarily mean available to applications (see Step 2). Copy the three shared library element definitions to the <application-server> element of your new container (in server.xml).
    <shared-library name="oracle.expression-evaluator" version="10.1.3" library-compatible="true">
         <code-source path="/usr2/oracle/as10130/jlib/commons-el.jar"/>
         <code-source path="/usr2/oracle/as10130/jlib/oracle-el.jar"/>
         <code-source path="/usr2/oracle/as10130/jlib/jsp-el-api.jar"/>
    </shared-library>
    <shared-library name="adf.oracle.domain" version="10.1.3" library-compatible="true">
         <code-source path="/usr2/oracle/as10130/BC4J/lib"/>
         <code-source path="/usr2/oracle/as10130/jlib/commons-cli-1.0.jar"/>
         <code-source path="/usr2/oracle/as10130/mds/lib/concurrent.jar"/>
         <code-source path="/usr2/oracle/as10130/mds/lib/mdsrt.jar"/>
         <code-source path="/usr2/oracle/as10130/jlib/share.jar"/>
         <code-source path="/usr2/oracle/as10130/jlib/regexp.jar"/>
         <code-source path="/usr2/oracle/as10130/jlib/xmlef.jar"/>
         <code-source path="/usr2/oracle/as10130/BC4J/jlib/adfmtl.jar"/>
         <code-source path="/usr2/oracle/as10130/BC4J/jlib/adfui.jar"/>
         <code-source path="/usr2/oracle/as10130/BC4J/jlib/adf-connections.jar"/>
         <code-source path="/usr2/oracle/as10130/BC4J/jlib/dc-adapters.jar"/>
         <code-source path="/usr2/oracle/as10130/ord/jlib/ordim.jar"/>
         <code-source path="/usr2/oracle/as10130/ord/jlib/ordhttp.jar"/>
         <code-source path="/usr2/oracle/as10130/jlib/ojmisc.jar"/>
         <code-source path="/usr2/oracle/as10130/jlib/jdev-cm.jar"/>
         <code-source path="/usr2/oracle/as10130/lib/xsqlserializers.jar"/>
         <import-shared-library name="oracle.xml"/>
         <import-shared-library name="oracle.jdbc"/>
         <import-shared-library name="oracle.cache"/>
         <import-shared-library name="oracle.dms"/>
         <import-shared-library name="oracle.sqlj"/>
         <import-shared-library name="oracle.toplink"/>
         <import-shared-library name="oracle.ws.core"/>
         <import-shared-library name="oracle.ws.client"/>
         <import-shared-library name="oracle.xml.security"/>
         <import-shared-library name="oracle.ws.security"/>
         <import-shared-library name="oracle.ws.reliability"/>
         <import-shared-library name="oracle.jwsdl"/>
         <import-shared-library name="oracle.http.client"/>
         <import-shared-library name="oracle.expression-evaluator"/>
    </shared-library>
    <shared-library name="adf.generic.domain" version="10.1.3" library-compatible="true">
         <code-source path="/usr2/oracle/as10130/BC4J/jlib/bc4jdomgnrc.jar"/>
         <code-source path="/usr2/oracle/as10130/BC4J/lib"/>
         <code-source path="/usr2/oracle/as10130/jlib/commons-cli-1.0.jar"/>
         <code-source path="/usr2/oracle/as10130/mds/lib/concurrent.jar"/>
         <code-source path="/usr2/oracle/as10130/mds/lib/mdsrt.jar"/>
         <code-source path="/usr2/oracle/as10130/jlib/share.jar"/>
         <code-source path="/usr2/oracle/as10130/jlib/regexp.jar"/>
         <code-source path="/usr2/oracle/as10130/jlib/xmlef.jar"/>
         <code-source path="/usr2/oracle/as10130/BC4J/jlib/adfmtl.jar"/>
         <code-source path="/usr2/oracle/as10130/BC4J/jlib/adfui.jar"/>
         <code-source path="/usr2/oracle/as10130/BC4J/jlib/adf-connections.jar"/>
         <code-source path="/usr2/oracle/as10130/BC4J/jlib/dc-adapters.jar"/>
         <code-source path="/usr2/oracle/as10130/ord/jlib/ordim.jar"/>
         <code-source path="/usr2/oracle/as10130/ord/jlib/ordhttp.jar"/>
         <code-source path="/usr2/oracle/as10130/jlib/ojmisc.jar"/>
         <code-source path="/usr2/oracle/as10130/jlib/jdev-cm.jar"/>
         <code-source path="/usr2/oracle/as10130/lib/xsqlserializers.jar"/>
         <import-shared-library name="oracle.xml"/>
         <import-shared-library name="oracle.jdbc"/>
         <import-shared-library name="oracle.cache"/>
         <import-shared-library name="oracle.dms"/>
         <import-shared-library name="oracle.sqlj"/>
         <import-shared-library name="oracle.toplink"/>
         <import-shared-library name="oracle.ws.core"/>
         <import-shared-library name="oracle.ws.client"/>
         <import-shared-library name="oracle.xml.security"/>
         <import-shared-library name="oracle.ws.security"/>
         <import-shared-library name="oracle.ws.reliability"/>
         <import-shared-library name="oracle.jwsdl"/>
         <import-shared-library name="oracle.http.client"/>
         <import-shared-library name="oracle.expression-evaluator"/>
    </shared-library>
    2. To make the necessary ADF and JSF support libraries available to your deployed ADF application, the default application (that your ADF application and the majority of applications should inherit from) should explicitly import the shared library in the <orion-application> element of $ORACLE_HOME/j2ee/<your container>/config/application.xml.
    <imported-shared-libraries>
         <import-shared-library name="adf.oracle.domain"/>
    </imported-shared-libraries>
    Note: the adf.oracle.domain shared library imports several other shared libraries including oracle.expression-evaluator.

  • How to create new RF transaction in R/3?

    Hi Guys,
    Can anyone tell me how to create new RF transaction In WM. If possible step by step.
    Thanks heeps.
    Narahari

    Hi again,
    well if you need it for an infoObject ZMATERIAL,
    Create the infoObject ZMATERIAL with reference to 0MATERIAL and you will have all 0MATERIAL hierarchies available for ZMATERIAL.
    Nothing additional necessary.
    The creation of similar Hierarchy-Extractors in R/3 is, as far as i know, not possible.
    The proper order for the FF-Elements when uploading the self-defined hierarchy depends on the hierarchy-settings in the DataSource, for instance for sorted hierarchies:
    Node ID     NODEID     NUMC     8
    InfoObject Name     INFOOBJECT     CHAR     30
    Node Name     NODENAME     CHAR     32
    Link Name     LINK     CHAR     1
    Parent Node     PARENTID     NUMC     8
    First Subnode     CHILDID     NUMC     8
    Next Node Along     NEXTID     NUMC     8
    Language Key     LANGU     CHAR     1
    Description - Short     TXTSH     CHAR     20
    Description - Medium     TXTMD     CHAR     40
    Description - Long     TXTLG     CHAR     60
    Look also for the Function module for the FTP in se38 by FTP.
    hth
    cheers
    sven

  • How to create new actions ? in the interaction record screen

    Hi all,
    I'm working with the IC web client.
    In the interaction record screen the is a link to actions.
    But how to create new actions ? schedule actions ?
    Component "ICCMP_BT_INR"
    View "InrHeaderViewSet"

    Hi Eran,
    Gret is absolutely right ..The actions are transaction type specific and can be attached along in the customizing as mentioned above by gret , these can then be tested in the SAP gui first for their scheduled and start conditions and then in the ICWC.
    There is no special settings for actions in ICWC if they are there in your transaction they will come in the ICWC.
    Hope this helps
    Regards
    Raj

Maybe you are looking for