How to create new entry in SAP easy menu ?

Hi gurus,
In the project I need to create a new tree like a tree in the SAP easy menu , Is there any ways for doing this ?
For example:
I want to have a menu like this
-Root menu
         - Branch text 1
                   Transaction 1
                   Transaction 2.
         - Branch text 2
                   Transaction 3
                   Transaction 4.
Thanks in advance,
Points rewarded immeadiately

Hi,
try TCODE SE43.
Regards, Dieter

Similar Messages

How to create new requisitioner in sap mm for raising purchase requisition?

How to create new requisitioner in sap mm for raising purchase requisition?

Hi Dear,
There is some link will help you to create Purchase Requisition and other MM Documents.
http://www.docstoc.com/docs/11307932/SAP-MM-Manual-Create-Purchase-Requistion
http://www.r3.duke.edu/training/stepbystep/#purch
http://sapdocs.info/sap/materials-management-2/download-sap-purchasing-user-training-ppt-material/
Regards
Aamir

How to Create new entry, while keeping CoS and nsRoles in tact...

Hi,
Here's the short version:
How can one create a new entry/context in DS, copy the attributes from an existing entry (using JNDI) and save them in the new entry/context WITHOUT duplicating CoS or nsRole/DN info.
Long version of the question:
We are using DS 5.2 and Portal 6 (and messenger/calendar etc). We have our employees saved in DS. What I want to do is change a user's name/uid by copying the user's attributes (in JNDI) and create a New entry with the New uid, with all the other attributes the same. Then deleting the original entry.
This is what I have done...
1. Get all the employee's attributes... (abriviated)(ctx is the DirContext)
NamingEnumeration answer = ctx.search(searchBase, filter, ctls);
SearchResult sr = (SearchResult)answer.next();
Attributes attrs = sr.getAttributes();
2. Create a new employee with the same attributes (assume I use a different uid in the dn)
ctx.createSubcontext(dn, attrs);
This works...it copies all the attributes to the new entry -BUT- when you look at the LDIF file, it ADDS several more attributes to the new entry.
Example: it adds the following...
sunPortalNetletRules
sunPortalGatewayEnableSSO
sunPortalDesktopDpDocument
sunPortalDesktopDpLastModifiedUser
iplanet-am-user-auth-modules
And about 20 others...
Now if I am not mistaken, these are the CoS and roles that the DS uses and propagates down to the entry. But when I copy the attributes over, (using JNDI) I get these attributes too but I want to copy only the attributes that are unique and have DS handle the roles and CoS like it does for the original entry.
Is there a way to tell the DS to just use the CoS or roles instead of duplicating all these attributes in this individual entry??? (and do it using JNDI)
(sorry this question is sooooo long.)
Thanks!
Eric

Hello Viji,
I am extremely thank ful for the document.
Kindly help me with below points of possible
1)     if it is standard table (LFBK) , even then shall we will need to do the generate program
step in SCDO ?
2)     does it generate Z-function module ?
3)     do we need to call this function module at appropriate places to update the CDPOS and CDHDR
for changes in the standard table ?
4)     I have already created custom business object for LFBK so that Iu2019ll be able to create entry
in SWEC (fyi)
5)     how and when are the method used in the table maintenance generator called ?
6)     Page 14 point 3 says that "Add a new entry to link the Change Document Object ZPRPS_CD and
table ZPRPS so that changes are recorded when table entries change."
Does this mean that once we create SCDO and generate program, these two steps are enough
for the SWED entry to create change log in CDPOS and CDHDR ?
7)     It is understood that it is necessary that the change object in SWEC should be logged in
CDPOS and CDHDR only then the event would be created for the SWEC entry. is this correct ?
in order to create change log for the change object in CDHDR and CDPOS, is the SCDO entry
and generate program steps enough or the methods of table maintenance generator are also
required ?
thank you very much for your time
B

How to create new icon in SAP?

I want to display an icon on a push button. It is not a standard icon present. How can i add the new icon in SAP?

Hi Pallavi,
u can create icon by two diffferent ways,
1. By setting PF status in Application ToolBar
set pf-status 'Test' . Double Click on the 'Test' and select proper options for ur customised scenario
2. The another way is using FunctionModule like below
- 'ICON_CREATE'
-'ICON-SHOW'
SO INCLUDE THIS FUNCTION MODULE IN YOUR PROGRAM AND USE THEM
Note: Reward if useful

How to create new client in SAP IDES

Hi Experts,
          I have messed up with the existing 800 client in some configuration, Now i want to create a new client and want to set the configurations again, And which client we have to copy 000 or 800, because i did lot of configurations in 800 client. All my transports in 800 client are not released, if i copy 800 client will the old settings done in client 800 will be copied.
          For basis questions, where i have to post in SDN, because i did not find any section like SAP-Basis, suggest me where i have to post.
          Give me some suggestions on this.
Thanks & Regards,
Ravi.

You Need to do something like this .
Logon to the system
start Transaction SM31
Enter 'T000' as the table name
create a new entry with your preferred client number
logg off the system
Start a new gui logging on to the new client with user
'SAP*' and password 'pass'
Start transaction 'SCCL'
Use client 000 as source and your new client as target
give it the 'go'
wait some time
You can also do all these steps through the menu:
Tools
Administration
Administration
Client Administration
Client Copy
Local Copy
Hope this helps...
Abhinab Mishra

How to create new page in SAP Script?

Moved to correct forum by moderator. Duplicate deleted. Do NOT post the same question in two forums.
Hello friends,
I am modifying one SAP script.
It is already contains 2 pages. FIRST and NEXT.
All I have to do is to create one more page which should be display as last page.
And this last page should display some data.
I tried and created a new page in SE71 but when i execute the program, it doesn't show newly created (LAST) page.
Please guide me.
REgards,
RH
Edited by: Matt on Nov 7, 2008 4:26 PM

Hi
U need to force the call of this new page.
I suppose your sapscript is arrange with 2 page: FIRST and NEXT, where FIRST has NEXT as next page.
So the system automatically print the pages FIRST and NEXT: u need to insert the statament:
/: NEW-PAGE LAST
in the MAIN window.
U can create a text element NEW_PAGE and you'll call it as soon as you've finished to print the main data:
/E NEW_PAGE
/: NEW-PAGE LAST
U can use the fm CONTROL_FORM
Max

Create new window in SAP Script

Dear All
   how to create new window in sap script
Regards
Suresh
Edited by: Alvaro Tejada Galindo on Apr 9, 2008 11:58 AM

Hi,
To create a new window in scripts.
1. After opening the form in SE71   Click on Windows push button.
    it will gives a screen list of windows in a page
2. Click on Edit option in menu bar in Edit-->Create Element click it will gives a popup window in the window give Name of the window and short description press enter like that you can create windows in a page
3. Click on Page windows it will gives a screen where that window you want to place in that page.    Click on Edit option on menu bar Edit-->Create Element
it will gives a list of windows which your created in a page   here you have to select which window you want to place. Double click on that window it will adds on the page and give the bottom of the screen you can find standard attributes block
there you have to give the position of the window in a page.
or
Click on setting option on menu bar settings-->form painter
it will gives a GUI editor here you can drag the window position it is easy to use.
then you can see the layout.
Thanks
Ganesh

How to create a position in sap hr

hi friends
Does anybody knows how to create new POSITION IN SAP HR , plz guide me the steps

Hi
you can use the Transaction code PP01 for the same in that you need to select following
1. Select Plan Version : 01
2. Then the Object Type : Position
3. Then the IT 1000 i.e. Object and then Click on Create button.
regards
Swapnil

Proceedure of how to create a logo in SAP R/3

Dear Techie's,
Please tell me the Proceedure of how to create a logo in SAP R/3 and how to include in the ALV.
I suppose its to be included in the ALV_comentary_write function module.
Please guide me in full.
Regards,
-=Virendra=-

HI,
Please follow below steps
(1)Create a class name
SBDSV1 (TRANSACTION) --> New Entries --> Class name (SOME NAME) --> Class type (OT).
2)After entering the above details and saving, the fields Class object name fields   will be blank, make entries as shown below .
1)     Class : BDS_LOC1
2)     Class : BDS_POC1
3)     Class : BDS_REC1
4)     Object name : BDS_CONN00
3)- Now next time logging in to OAOR you can directly refer to this Class name.
4)1)     Go to transaction OAOR, give the class name created.
   2)     Give class type as OT
   3)     Give some name in object key its like sub folder
5) a) Click on create drag down standard doc types will get no. of option chose one
    b) double click on the class name in this new screen.
    c)in the below screen are, you have tabs for details,documentinfo,keywords,create, click on create TAB,
   d)By double clicking on screen you can browse the folder where image is located and select it
   e)Once the image is selected it will be stored in the folder that is created with object key
6) now double click on the image you uploaded & in below screen area select the Details tab, you will get object id,use this object id & code as below
7)form FILL_EVENTS .
DATA: wa_events TYPE SLIS_ALV_EVENT.
CLEAR: LS_EVENTS.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
   IMPORTING
     ET_EVENTS             = LS_EVENTS
wa_events-form = 'STD_TOP_OF_PAGE'.
MODIFY ls_events FROM wa_events TRANSPORTING FORM WHERE NAME =
'TOP_OF_PAGE'.
CLEAR: wa_events.
endform.                    " FILL_EVENTS
FORM STD_TOP_OF_PAGE.
DATA: it_listheader TYPE SLIS_T_LISTHEADER,
       is_listheader TYPE SLIS_LISTHEADER.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
    EXPORTING
      it_list_commentary       = it_listheader[]
     I_LOGO                   = 'ZTEST' "this is object id mentioned in 6 step
    I_END_OF_LIST_GRID       =
ENDFORM.
Regards,
Raghavendra

How to create new account determination in OBYC

Dear SAP Guru,
I'm getting error 'Maintain account determination (table T030B) for posting ST3' upon GR (posting) against PO. I noticed name of the procedure or group of procedures for which automatic postings can be generated is NOT maintain for ST3 in OBYC (Maintain FI Configuration : Automatic Posting - Procedure). Appreciate if you could show me the path or t/code how to create new procedure for ST3 & maintain in OBYC. Thank you.
rgds,
nantha

Hello Nantha,
Transaction key can be created in
SPRO - MM - Purchasing - Conditions - Define Proce determination Process - Define transaction/event key
Here go for new entries and maintain the transaction key with a description.
Then go to M/08 and maintain the transaction key in the 'acct key' field for your pricing procedure and the condition type.
Also make sure to tick the 'Accruals' tickbox in M/06 for the condition type you want to post in the account key.
Now go to OBYC and maintain the G/L accounts along with the posting keys and the posting rules as explained in my previous reply.
Regards
Gregory Mathews

How to create new authorisation object for Transactions?

Hi,
How to create new authorisaton object and how to assign that object on a transaction code?
Case ->
The transaction code VL01N have the object called V_LIKP_VST under Class "LE_V" that have two auth. fields. one is 'Activity' and other one is "Shipping Point/Receiving Point".
Here I want to add "Storage location" also. I have created one object called "Z_LIKP_VST" under same calass "LE_V". and added "Activity", "Shipping Poing/Receiving Poing" and "Storage Location". After that I added that object ("Z_LIKP_VST") for particular transaction through "SU24". I maintained the "Display check indicator" for VL01N.
I created one new role and assigend the particular transacation for a user. but still SAP taking V_LIKP_VST insted of Z_LIKP_VST.
How can I change my Z_LIKP_VST on profile.
Please help
Thanks in Advance
Lal

Hi Kariyath,
I suppose its not about interest but a MUST.. sorry but.. unless u include the Logic in the program how can SAP pick these custom Z objects ?
after u create them and assign to a Tcode in SU24 there is no logic to check these objects. Frankly i see no other chance.... unless SAP comes to us with a great easy way to input these Custom objects
Keep looking and please Update me if u have any Inputs....on this front..
All the Best
Br,
Sri
Award points for helpful answers

How to create an infotype in sap ecc6.0 ?

Hi all,
I know i how to create an infotype in sap 4.7, but i am facing the problem while
creating an infotype in sap ecc6.0 version. could u plz provide me the info with screen shots how to create an infotype and how to enhace that infotype ?
Waiting for u r response.
Regards,
Ravi

Hi ,
To create OM infotype:
1. Go to SE11 and create a structure HRI9XXX (9XXX --> name of the infotype). Add the required fields to this structure and save and activate. then come out of it.
2. Go to PPCI and enter Infotype number (9XXX) and description.
3. Click create.
4. In the infotype category select details for the infotype.
5. Click create button. It should create the infotype.
6. Click on Check. A window with menu will open.
7. In that window navigate to Table Entries.
8. Under table Entries, select T777I and click on change.
9. It opens SM30. Click on Maintain.
10. Select the infotype and add information for "Time Constraint" and "Infotype Per Object Type".
11. Save.
12. Go back to check menu, see if all entries exist. Do not worry last 5 table entries. And you are done

Unable to create new entry in table that has no primary key

Hi
I have a table which is required to have no primary key (except mandt). After i generate table maintanance, when I go to create new entries, the table control to enter the new values does not appear. When I click on edit->new entries, it goes back to the fields tab of the table. Same when i check through SM30.
If i maintain atleast one primary key, I am able to get the table control in new entries screen. However the requirement permits no primary keys except mandt. How can this be resolved?
Thanks
NM

Hi,
THE PROBLEM WITH UR TABLE IS
YOU HAD DECLARED MANDT AS THE PRIMARY KEY AND THERE IS NO OTHER KEY IN UR TABLE
iT'S NOT ALLOWING YOU TO ADD NEW ENTRIES BECAUSE MANDT IS THE ONLY PRIMARY KEY IN YOUR TABLE AND IT WILL HAVE A DEFAULT VALUE BASED ON THE CLIENT. SO IT'S NOT SHOWING YOU THE CREATE NEW ENTRIES OPTION.
SO TRY TO PUT ONE MORE FIELD AS THE PRIMARY KEY SO THAT YOUR PROBLEM WILL SOLVE VERY EASILY ALSO MAKE SURE THAT TABLE IS ACTIVATED.
REVERT IF U NEED SOME MORE HELP
Thanks &Regards.
Pavan.

How to create report writer in sap?

Hi Anybody,
I want to create new report writer for finance report for ex: (p & L or balance sheet), i don't know how to create report writer in sap.
anybody please tell me with example?
Thanks
Regards,
S.Muthu.
IT Dept.

https://www.sdn.sap.com/irj/scn/advancedsearch?cat=sdn_all&query=createreportwriter&adv=false&sortby=cm_rnd_rankvalue

Creating new company in sap b1 8.8

Hi
While creating new company in SAP-B1 8.8, it's giving me the following information.
"Company was not added to read-only DB user. Read-only DB user must be updated manually"
I had also given the SITE password and created the new company successfully.
Can anyone help me on this please.
regards
Sriram.L

Hi Deepak
Thanks for Your response.
I followed the steps you mentioned. While doing that, it's asking for Read Only Db User ID & Password. If i give new ID & Password it gives the following information.
"A Read Only DB USER is assigned for all Company Database, Adding a read only DB user is irreversible. Do you want to continue"
Can you please guide me how this can be taken forward.
regards
Karthik

How to create new entry in SAP easy menu ?

Similar Messages

Maybe you are looking for