How to create new message in wsdl

Hi all, how to create a new message apart from the request message and response message that get created when the BPEL process is created? For example, in LoanValidator project(this is the sample project that came with 10g instatllation), the request and response messages are LoanValidatorRequestMessage,LoanValidatorResultMessage and another message is there which is InvalidApplicationExceptionLoanValidatorMessage there. how to create this message? and its corresponding operation also.Thank you.
Regards,
user11275112

messages are defined in the wsdl and have part(s) that refer to the real type / element. So just go to the wsdl that is the client partnerlink's one - and add yours there. the operation (defined in the portType) contains input / output / fault children. each referring to a message defined.
cheers clemens

Similar Messages

How to Create new Message Control for BOM

Dear Experts,
My question is , we have Set Deletion flag for BOM of some material, When we go to make Production Order. it is showing an warning message , I want to set Error message,instead of warning message . can you all plz tell me how to do it in conflig.
I have tried following settings , but it allows me to change it, but not to create a new message no
IMG, Production, Basic data, Bill of material, General Data, Change Message type
Thank you for your time.

Hi,
For OPJB, execute.
Click on 'New entries'.
Enter version as 000, application area (the first two digits of the message no, for BOM it would be CO I guess), & message no.
Press enter. Under category maintain as E i.e. error.
For SE91, execute.
In message class enter the first two digits of the message, under subobjetcs, enter the message number & clcik on 'where used list icon' in extreme left.
A dialogue box will apeear, select programme & classes. Click on right mark i.e. execute.
A list of programmes will displayed.
Select the relevant programme & clcik on change.
Change the warning into error there. Please note that you need access key & need ABAP consultant to do the same.
Hope this helps you.
SmanS

Create New Message number in Validation

Hi,
I have to create a new step in the validation, for which i want new message.
please advice how to create new Message number? transaction code for it?
thank you in advance,
Vidya

Hi
For creating Validations go to GGB0.
In the step itself you will have message also.
you will find a change (pencil) button, click on tht it will take to new screen and there you can create a new message with number.
Activate the Validation in GGB4.
Regards
Venkat

How to create new database on Oracle 10g

Hi All,
Can any one tell me how to create new database on oracle 10g.
Thanks in Advance for your help.

again some confusion here.....
u said u need a new database in your first post and now you saying u need a new schema..
one database has many schemas(users)..... ex: scott,sys,system are few of them...
now it depends you need seperate database for test,dev environment - this is in the case u have many schemas under each database and many tables(objects) under each schema.
OR
You just need a separate schema (in same db) for test,dev environment...where in you will have multiple tables in each schema...U need to know the dba credentials of the db to create a new schema.
ideally u need to have different database...You can create one with out sys/system(oracle users) password as these passwords are db dependent.
what you need is access to the any machine where server is installed(can be the same mc where you have your dev db or a diff machine) and that will be the machine where your db will be installed (can do it through database configuration assistance),ofcourse you will need windows authentication for this.
so you login to the same machine or access it from your machine using remote login.
I hope that is clear.Hope i am not listing things that you already know..Just did it coz of confusion between db and schema
Message was edited by:
coolguy

How to create new scope for SharePoint calendar?

How to create new scope for SharePoint calendar?
I have a calendar list to which I want to create following scopes-
Annual View
Half Year 1 (Jan-June)
Half Year 2 (Jul-Dec)
Quarter 1 (Jan-Mar)
Quarter 2 (Apr-Jun)
Quarter 3 (Jul-Sep)
Quarter 4 (Oct-Dec)
How this can be created. Any help appriciated. Thanks.

Hi Pratima,
Can you please see below link and code snippet for how to
format date in gridview.
http://www.aspdotnet-suresh.com/2011/05/how-to-set-date-format-in-gridview.html
<html xmlns="http://www.w3.org/1999/xhtml">
<head runat="server">
<title>Gridvew Date format</title>
</head>
<body>
<form id="form1" runat="server">
<div>
<asp:GridView runat="server" ID="gvdetails" DataSourceID="dsdetails" AllowPaging="true" AllowSorting="true" AutoGenerateColumns="false">
<RowStyle BackColor="#EFF3FB" />
<FooterStyle BackColor="#507CD1" Font-Bold="True" ForeColor="White" />
<PagerStyle BackColor="#2461BF" ForeColor="White" HorizontalAlign="Center" />
<HeaderStyle BackColor="#507CD1" Font-Bold="True" ForeColor="White" />
<AlternatingRowStyle BackColor="White" />
<Columns>
<asp:BoundField DataField="Date1" HeaderText="Date1" HtmlEncode="false" DataFormatString="{0:s}" />
<asp:BoundField DataField="Date2" HeaderText="Date2" HtmlEncode="false" DataFormatString="{0:D}" />
<asp:BoundField DataField="Date3" HeaderText="Date3" HtmlEncode="false" DataFormatString="{0:m}" />
<asp:BoundField DataField="Date4" HeaderText="Date4" HtmlEncode="false" DataFormatString="{0:d}" />
<asp:BoundField DataField="Total" HeaderText="Total" HtmlEncode="false" DataFormatString="{0:C2}" />
</Columns>
</asp:GridView>
<asp:SqlDataSource ID="dsdetails" runat="server" SelectCommand="select * from DateFormat" ConnectionString="<%$ConnectionStrings:dbconnection %>"></asp:SqlDataSource>
</div>
</form>
</body>
</html>
Hope this will help you.
Regards
Soni K

How to create new XML file using retreived XML content by using SAX API?

hi all,
* How to create new XML file using retreived XML content by using SAX ?
* I have tried my level best, but output is coming invalid format, my code is follows,
XMLFileParser.java class :-
import java.io.StringReader;
import java.io.StringWriter;
import javax.xml.transform.OutputKeys;
import javax.xml.transform.Transformer;
import javax.xml.transform.TransformerConfigurationException;
import javax.xml.transform.TransformerException;
import javax.xml.transform.TransformerFactory;
import javax.xml.transform.dom.DOMResult;
import javax.xml.transform.sax.SAXSource;
import javax.xml.transform.sax.SAXTransformerFactory;
import javax.xml.transform.sax.TransformerHandler;
import javax.xml.transform.stream.StreamResult;
import org.w3c.dom.Document;
import org.xml.sax.Attributes;
import org.xml.sax.InputSource;
import org.xml.sax.SAXException;
import org.xml.sax.helpers.XMLFilterImpl;
public class PdfParser extends XMLFilterImpl {
    private TransformerHandler handler;
    Document meta_data;
    private StringWriter meta_data_text = new StringWriter();
    public void startDocument() throws SAXException {
    void startValidation() throws SAXException {
        StreamResult streamResult = new StreamResult(meta_data_text);
        SAXTransformerFactory factory = (SAXTransformerFactory) SAXTransformerFactory.newInstance();
        try
            handler = factory.newTransformerHandler();
            Transformer transformer = handler.getTransformer();
            transformer.setOutputProperty(OutputKeys.ENCODING, "UTF-8");
            transformer.setOutputProperty(OutputKeys.INDENT, "yes");
            handler.setResult(streamResult);
            handler.startDocument();
        catch (TransformerConfigurationException tce)
            System.out.println("Error during the parse :"+ tce.getMessageAndLocation());
        super.startDocument();
    public void startElement(String namespaceURI, String localName,
            String qualifiedName, Attributes atts) throws SAXException {
        handler.startElement(namespaceURI, localName, qualifiedName, atts);
        super.startElement(namespaceURI, localName, qualifiedName, atts);
    public void characters(char[] text, int start, int length)
            throws SAXException {
        handler.characters(text, start, length);
        super.characters(text, start, length);
    public void endElement(String namespaceURI, String localName,
            String qualifiedName) throws SAXException {
        super.endElement("", localName, qualifiedName);
        handler.endElement("", localName, qualifiedName);
    public void endDocument() throws SAXException {
    void endValidation() throws SAXException {
        handler.endDocument();
        try {
            TransformerFactory transfactory = TransformerFactory.newInstance();
            Transformer trans = transfactory.newTransformer();
            SAXSource sax_source = new SAXSource(new InputSource(new StringReader(meta_data_text.toString())));
            DOMResult dom_result = new DOMResult();
            trans.transform(sax_source, dom_result);
            meta_data = (Document) dom_result.getNode();
            System.out.println(meta_data_text);
        catch (TransformerConfigurationException tce) {
            System.out.println("Error occurs during the parse :"+ tce.getMessageAndLocation());
        catch (TransformerException te) {
            System.out.println("Error in result transformation :"+ te.getMessageAndLocation());
} CreateXMLFile.java class :-
Sax.startDocument();
Sax.startValidation();
Sax.startElement("", "pdf", "pdf", new AttributesImpl());
Sax.startElement("", "basic-metadata", "basic-metadata", new AttributesImpl());
String xmp_str = new String(meta_data.getByteArray(),"UTF8");
char[] xmp_arr = xmp_str.toCharArray();
Sax.characters(xmp_arr, 0, xmp_arr.length);
Sax.endElement("", "pdf", "pdf");
Sax.endValidation();
Sax.endDocument();
Sax.endElement("", "basic-metadata", "basic-metadata");* In CreateXMLFile.java
class, I have retreived the xml content in the meta_data object, after that i have converted into character array and this will be sends to SAX
* In this case , the XML file created successfully but the retreived XML content added as an text in between basic-metadata Element, that is, retreived XML content
is not an XML type text, it just an Normal text Why that ?
* Please help me what is the problem in my code?
Cheers,
JavaImran

Sax.startDocument();
Sax.startValidation();
Sax.startElement("", "pdf", "pdf", new AttributesImpl());
Sax.startElement("", "basic-metadata", "basic-metadata", new AttributesImpl());
String xmp_str = new String(meta_data.getByteArray(),"UTF8");
char[] xmp_arr = xmp_str.toCharArray();
Sax.characters(xmp_arr, 0, xmp_arr.length);
</code><code>Sax.endElement("", "basic-metadata", "basic-metadata");</code>
<code class="jive-code jive-java">Sax.endElement("", "pdf", "pdf");
Sax.endValidation();
Sax.endDocument();
* I HAVE CHANGED MY AS PER YOUR SUGGESTION, NOW SAME RESULT HAS COMING.
* I AM NOT ABLE TO GET THE EXACT OUTPUT.,WHY THAT ?
Thanks,
JavaImran{code}

How we create new data base in oracle 10g express edition

hello every body.. i student of B tech n new user of oracle so please help me how we creat new data base in oracle 10g express edition

Hello, Oracle XE can not create more than one instance, the other editions yes, but like other editions XE allows you to create database schemas, schemas logically grouped objects like tables, views, indexes created by a user. By creating an Oracle user is associated with a schema of the same name.
Using SYS or system accounts for creating user accounts.
Syntax to create a user:
create user Your_user
IDENTIFIED BY password
default tablespace users;
grant connect, resources to your_user;
Edited by: rober584812 on Jun 25, 2010 9:03 PM

How to create new client in XI

Hi all,
Can any one guide me how to create new client in XI.

Hi
To set up a new client, follow these steps
1) Create a client going in to the path
<b>Tools->Administration ->Administration -> Client administration -> Client maintenance</b>
or can also use TCODE <b>scc4</b>
2)Login into the client with
User: <b>DDIC</b> or <b>SAP*</b>
Password
For default password go thru this link
http://help.sap.com/saphelp_nw04/helpdata/en/52/67179f439b11d1896f0000e8322d00/content.htm
Regards
Arpit Seth

How to create new or delete the existing row in the grid....

hi my friends...
i am developing report using Reuse_alv_grid_display...
my requirement is... At runtime
          1. i may create new row on the grid (empty row inwhich i may enter the data).
          2. i may delete a existing row in the grid
          3. i may edit the existing data...
then i have to trace the modification in the grid in one internal table...
how can i get into this.....
note:
i have some idea to edit the existing record in the grid and trace those modification,
but i don't know abt how to create new or delete the existing row....
can you give me some idea...

Hi deva,
write a class which implemets these methods
CLASS lcl_event_receiver DEFINITION.
PUBLIC SECTION.
    METHODS:
To handle the toolbar on alv
     handle_toolbar
       FOR EVENT toolbar OF cl_gui_alv_grid
          IMPORTING e_object e_interactive,
To handle the buttons on the alv grid
     handle_user_command
       FOR EVENT user_command OF cl_gui_alv_grid
       IMPORTING e_ucomm.
endclass.
Now Implement these methods.
CLASS lcl_event_receiver IMPLEMENTATION.
To handle the toolbar on alv
METHOD handle_toolbar.
   DATA ls_toolbar TYPE stb_button.
    CLEAR gs_toolbar.
    MOVE 3 TO gs_toolbar-butn_type.
    APPEND gs_toolbar TO e_object->mt_toolbar.
    CLEAR gs_toolbar.
    PERFORM icon_create USING 'ICON_INSERT_ROW' gs_toolbar-icon.
    MOVE text-010 TO gs_toolbar-function.
    MOVE text-012 TO gs_toolbar-quickinfo.
    MOVE ' ' TO gs_toolbar-disabled.
    APPEND gs_toolbar TO e_object->mt_toolbar.
    CLEAR gs_toolbar.
    PERFORM icon_create USING 'ICON_DELETE_ROW' gs_toolbar-icon.
    MOVE text-011 TO gs_toolbar-function.
    MOVE text-013 TO gs_toolbar-quickinfo.
    MOVE ' ' TO gs_toolbar-disabled.
    APPEND gs_toolbar TO e_object->mt_toolbar.
ENDMETHOD.
   METHOD handle_user_command.
In this form, check the function code(e_ucomm has the function code), based on that do the required action.
as i said yesterday(i.e for appending a row, deleting a row, modifying a row)
    PERFORM user_command USING e_ucomm.
ENDMETHOD
endclass.
Before calling the alv method, create a object of this class.
DATA :
      gref_event_receiver TYPE REF TO lcl_event_receiver,
      gv_tables_alv          TYPE REF TO cl_gui_alv_grid.
      CREATE OBJECT gref_event_receiver.
      SET HANDLER   gref_event_receiver->handle_user_command
                    FOR gv_tables_alv.
      SET HANDLER   gref_event_receiver->handle_toolbar
                    FOR gv_tables_alv.
check this program for event handling, it is the similar way
demo_abap_objects_events
Hope u understood this.
Regards,
Prasant
reward if helpful

How to create new .dat file and its contents?

Hi There
Can anybody let me know the procedure of how to create new .ctl or .dat file to load data to tables.
i working on 2day dba chapter 8. it shows me how to creat table and use .dat file to load data. but doesnot giv any clue how new .dat file and its contents can be created. please help.
thanks in advance.

Thanks for ur help
I ve created txt file in notepad and saved it as dat file. tried to load that data thru Enterprise manager. used load data from User files everything went well and job was showing suceeded but dont know why that data is not showing in the table. i ve tried it now for three four times. used right table and pathe but dont know. has anybody got idea why that ll be?
Thanks

How to create new account determination in OBYC

Dear SAP Guru,
I'm getting error 'Maintain account determination (table T030B) for posting ST3' upon GR (posting) against PO. I noticed name of the procedure or group of procedures for which automatic postings can be generated is NOT maintain for ST3 in OBYC (Maintain FI Configuration : Automatic Posting - Procedure). Appreciate if you could show me the path or t/code how to create new procedure for ST3 & maintain in OBYC. Thank you.
rgds,
nantha

Hello Nantha,
Transaction key can be created in
SPRO - MM - Purchasing - Conditions - Define Proce determination Process - Define transaction/event key
Here go for new entries and maintain the transaction key with a description.
Then go to M/08 and maintain the transaction key in the 'acct key' field for your pricing procedure and the condition type.
Also make sure to tick the 'Accruals' tickbox in M/06 for the condition type you want to post in the account key.
Now go to OBYC and maintain the G/L accounts along with the posting keys and the posting rules as explained in my previous reply.
Regards
Gregory Mathews

How to create new OC4J instance in AS 10.1.3 with BC4J- and ADF-Libraries

Hi
I have done all the steps mentioned in this thread:
How to create new OC4J instance in AS 10.1.3
However, the new created OC4J instance obviously misses some libraries. If I deploy my Application to this OC4J I get an internal error: Class not found: oracle.jbo.JboException.
The same Application runs well in the "home" Instance.
What is the trick, to create a new OC4J instance, which more or less behaves the same way as the "home" instances (and especially has all the same libraries)?
Thanks for your help
Frank Brandstetter

I encountered this last month. I definitely agree that it is a glaring omission to not have "Create Like" functionality when instantiating new containers. Here's my notes on the manual steps required after using createinstance to create the fresh container. Not too bad. I've been deploying ADF applications to the new container with no problems after this.
==============
The default (home) OC4J container is pre-configured for ADF 10.1.3 applications; however, when $ORACLE_HOME/bin/createinstance is used to create additional containers, these containers are not configured automatically to host ADF 10.1.3 applications.
I followed these manual steps:
1. $ORACLE_HOME/j2ee/home/config/server.xml defines three shared libraries that "install" the needed JARs for Oracle ADF applications in your application server instance (container). Note that "install" does not necessarily mean available to applications (see Step 2). Copy the three shared library element definitions to the <application-server> element of your new container (in server.xml).
<shared-library name="oracle.expression-evaluator" version="10.1.3" library-compatible="true">
     <code-source path="/usr2/oracle/as10130/jlib/commons-el.jar"/>
     <code-source path="/usr2/oracle/as10130/jlib/oracle-el.jar"/>
     <code-source path="/usr2/oracle/as10130/jlib/jsp-el-api.jar"/>
</shared-library>
<shared-library name="adf.oracle.domain" version="10.1.3" library-compatible="true">
     <code-source path="/usr2/oracle/as10130/BC4J/lib"/>
     <code-source path="/usr2/oracle/as10130/jlib/commons-cli-1.0.jar"/>
     <code-source path="/usr2/oracle/as10130/mds/lib/concurrent.jar"/>
     <code-source path="/usr2/oracle/as10130/mds/lib/mdsrt.jar"/>
     <code-source path="/usr2/oracle/as10130/jlib/share.jar"/>
     <code-source path="/usr2/oracle/as10130/jlib/regexp.jar"/>
     <code-source path="/usr2/oracle/as10130/jlib/xmlef.jar"/>
     <code-source path="/usr2/oracle/as10130/BC4J/jlib/adfmtl.jar"/>
     <code-source path="/usr2/oracle/as10130/BC4J/jlib/adfui.jar"/>
     <code-source path="/usr2/oracle/as10130/BC4J/jlib/adf-connections.jar"/>
     <code-source path="/usr2/oracle/as10130/BC4J/jlib/dc-adapters.jar"/>
     <code-source path="/usr2/oracle/as10130/ord/jlib/ordim.jar"/>
     <code-source path="/usr2/oracle/as10130/ord/jlib/ordhttp.jar"/>
     <code-source path="/usr2/oracle/as10130/jlib/ojmisc.jar"/>
     <code-source path="/usr2/oracle/as10130/jlib/jdev-cm.jar"/>
     <code-source path="/usr2/oracle/as10130/lib/xsqlserializers.jar"/>
     <import-shared-library name="oracle.xml"/>
     <import-shared-library name="oracle.jdbc"/>
     <import-shared-library name="oracle.cache"/>
     <import-shared-library name="oracle.dms"/>
     <import-shared-library name="oracle.sqlj"/>
     <import-shared-library name="oracle.toplink"/>
     <import-shared-library name="oracle.ws.core"/>
     <import-shared-library name="oracle.ws.client"/>
     <import-shared-library name="oracle.xml.security"/>
     <import-shared-library name="oracle.ws.security"/>
     <import-shared-library name="oracle.ws.reliability"/>
     <import-shared-library name="oracle.jwsdl"/>
     <import-shared-library name="oracle.http.client"/>
     <import-shared-library name="oracle.expression-evaluator"/>
</shared-library>
<shared-library name="adf.generic.domain" version="10.1.3" library-compatible="true">
     <code-source path="/usr2/oracle/as10130/BC4J/jlib/bc4jdomgnrc.jar"/>
     <code-source path="/usr2/oracle/as10130/BC4J/lib"/>
     <code-source path="/usr2/oracle/as10130/jlib/commons-cli-1.0.jar"/>
     <code-source path="/usr2/oracle/as10130/mds/lib/concurrent.jar"/>
     <code-source path="/usr2/oracle/as10130/mds/lib/mdsrt.jar"/>
     <code-source path="/usr2/oracle/as10130/jlib/share.jar"/>
     <code-source path="/usr2/oracle/as10130/jlib/regexp.jar"/>
     <code-source path="/usr2/oracle/as10130/jlib/xmlef.jar"/>
     <code-source path="/usr2/oracle/as10130/BC4J/jlib/adfmtl.jar"/>
     <code-source path="/usr2/oracle/as10130/BC4J/jlib/adfui.jar"/>
     <code-source path="/usr2/oracle/as10130/BC4J/jlib/adf-connections.jar"/>
     <code-source path="/usr2/oracle/as10130/BC4J/jlib/dc-adapters.jar"/>
     <code-source path="/usr2/oracle/as10130/ord/jlib/ordim.jar"/>
     <code-source path="/usr2/oracle/as10130/ord/jlib/ordhttp.jar"/>
     <code-source path="/usr2/oracle/as10130/jlib/ojmisc.jar"/>
     <code-source path="/usr2/oracle/as10130/jlib/jdev-cm.jar"/>
     <code-source path="/usr2/oracle/as10130/lib/xsqlserializers.jar"/>
     <import-shared-library name="oracle.xml"/>
     <import-shared-library name="oracle.jdbc"/>
     <import-shared-library name="oracle.cache"/>
     <import-shared-library name="oracle.dms"/>
     <import-shared-library name="oracle.sqlj"/>
     <import-shared-library name="oracle.toplink"/>
     <import-shared-library name="oracle.ws.core"/>
     <import-shared-library name="oracle.ws.client"/>
     <import-shared-library name="oracle.xml.security"/>
     <import-shared-library name="oracle.ws.security"/>
     <import-shared-library name="oracle.ws.reliability"/>
     <import-shared-library name="oracle.jwsdl"/>
     <import-shared-library name="oracle.http.client"/>
     <import-shared-library name="oracle.expression-evaluator"/>
</shared-library>
2. To make the necessary ADF and JSF support libraries available to your deployed ADF application, the default application (that your ADF application and the majority of applications should inherit from) should explicitly import the shared library in the <orion-application> element of $ORACLE_HOME/j2ee/<your container>/config/application.xml.
<imported-shared-libraries>
     <import-shared-library name="adf.oracle.domain"/>
</imported-shared-libraries>
Note: the adf.oracle.domain shared library imports several other shared libraries including oracle.expression-evaluator.

How to create new RF transaction in R/3?

Hi Guys,
Can anyone tell me how to create new RF transaction In WM. If possible step by step.
Thanks heeps.
Narahari

Hi again,
well if you need it for an infoObject ZMATERIAL,
Create the infoObject ZMATERIAL with reference to 0MATERIAL and you will have all 0MATERIAL hierarchies available for ZMATERIAL.
Nothing additional necessary.
The creation of similar Hierarchy-Extractors in R/3 is, as far as i know, not possible.
The proper order for the FF-Elements when uploading the self-defined hierarchy depends on the hierarchy-settings in the DataSource, for instance for sorted hierarchies:
Node ID     NODEID     NUMC     8
InfoObject Name     INFOOBJECT     CHAR     30
Node Name     NODENAME     CHAR     32
Link Name     LINK     CHAR     1
Parent Node     PARENTID     NUMC     8
First Subnode     CHILDID     NUMC     8
Next Node Along     NEXTID     NUMC     8
Language Key     LANGU     CHAR     1
Description - Short     TXTSH     CHAR     20
Description - Medium     TXTMD     CHAR     40
Description - Long     TXTLG     CHAR     60
Look also for the Function module for the FTP in se38 by FTP.
hth
cheers
sven

How to create new actions ? in the interaction record screen

Hi all,
I'm working with the IC web client.
In the interaction record screen the is a link to actions.
But how to create new actions ? schedule actions ?
Component "ICCMP_BT_INR"
View "InrHeaderViewSet"

Hi Eran,
Gret is absolutely right ..The actions are transaction type specific and can be attached along in the customizing as mentioned above by gret , these can then be tested in the SAP gui first for their scheduled and start conditions and then in the ICWC.
There is no special settings for actions in ICWC if they are there in your transaction they will come in the ICWC.
Hope this helps
Regards
Raj

RV120W- How to create new unique self-signed certificate?

Hello,
how to create new unique self-signed certificate on RV120W? I can create request for singning by external CA, but I cannot create new unique self-signed certificate itself. Any idea? Did I miss something? Many thanks!
Abudef

So basically RV120W does not support self-signed certificate? It only allows to generate private key and certificate signin request. There is no chance to replace default generic ssl/vpn certifice within router itself? Could you please give me an advice, how to sign that request by some "CA"? I mean no commercial CA, I need something free running under Windows os. Many thanks!

How to create new message in wsdl

Similar Messages

Maybe you are looking for