How to create new storage group and mailbox database on exchange 2007 CCR

Hi, Our Environment:
Exchange 2007 SP3 CCR.
Now I want to create a new storage group with edb file and log files on the new drive.
My plan is as below:
Once we have new drive ready on both active node and passive node,
1): Create new storage group with log files for this new storage group on other new drive from Active Node.
2): Create new mailbox database under this newly created storage group with the DB file on the new drive from active node.
My question is:
1): Do I need to perform above steps from active node only? or Do I need to do it from both active node and passive node?
2): How many storage groups can we create on one Exchange 2007 Enterprise server, we already have 25 SGs in place.
Thanks in advance.

Hi,
Here are my answers you can refer to:
1. We can just create new storage group on the active node. And it’ll be replicated to the passive node.
We can use the following command in EMS to verify the new Storage Group is being replicated to the passive node:
Get-StorageGroupCopyStatus "Second Storage Group" | Select SummaryCopyStatus,CCRTargetNode
http://exchangepedia.com/blog/2007/08/how-to-create-new-storage-group-in-ccr.html
2. For Exchange 2007 enterprise version, we can have up to 50 storage groups:
http://www.computerperformance.co.uk/exchange2007/exchange2007_storage_groups.htm
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
sure that you completely understand the risk before retrieving any suggestions from the above link.
If you have any question, please feel free to let me know.
Thanks,
Angela Shi
TechNet Community Support

Similar Messages

How to create new .dat file and its contents?

Hi There
Can anybody let me know the procedure of how to create new .ctl or .dat file to load data to tables.
i working on 2day dba chapter 8. it shows me how to creat table and use .dat file to load data. but doesnot giv any clue how new .dat file and its contents can be created. please help.
thanks in advance.

Thanks for ur help
I ve created txt file in notepad and saved it as dat file. tried to load that data thru Enterprise manager. used load data from User files everything went well and job was showing suceeded but dont know why that data is not showing in the table. i ve tried it now for three four times. used right table and pathe but dont know. has anybody got idea why that ll be?
Thanks

Creating New Security group and Refreshing Security Filters

Hi
I have created a new security group (and added people to it)
I have given this security group write access to certain dimension members within the planning application
I have refreshed the security filters via Planning_Manage Database_Security Filters
But the people in the new security group still dont have write access to the dimension members
If I look in EAS ... I cant see the the new security group that I have created
Question 1
Do I need to refresh the security filters via EAS
If I do this ... I know that I need to make sure that no one is in the Essbase application
Do I also need to make sure that no one is within the relavent planning application?
Question 2
Is it enough to refresh the security filters (tick security filters) .. or Do I need to tick database in the manage database options
Question 3
Does anyone have any suggestions that I havent mentioned above?
Thank you
PD

Hi John
Thanks for your suggestion
I tried this and He still doesnt have write access
He doesnt need to be able to lock and send values via essbase ... However when we are in planning, He cant submit data to the dimension members mentioned above.. i.e the cells are all green
I have checked and doubled check the security on the dimension members (and form security) in the form that he cant edit
Do you have any other suggestions?
Thank you
PD

How to create new field groups in AA master data screen layout?

Hello,
We are using ECC 6.0
We have created bunch of new fields for asset master data, but we want to make them visible only for particular asset class. So we need to customize in SPRO Asset Master Data Screen Layout, but there no specific field groups that we can customize. So how to create and add new field groups to manage them by radiobuttons Required, Optional, No or Display?

hi,
think, it's not possible.
look here:
http://help.sap.com/saphelp_47x200/helpdata/en/4f/71e05a448011d189f00000e81ddfac/frameset.htm
"The field groups and their respective fields are defined in system tables"
kind regards
Andreas

How to create a Product Grouping and manage multiples?

How I can create a Product Grouping with 3 pieces of a product + 2 pieces of another product and ensure that customer can only order in multiples (6+4, 9+6, 12+8, etc.) and not for example 4+3?
Regards,
Francesco

Hi Madhavi,
You also need to assign the hierarchy to the application Product in Tcode: COMM_PRAPPLCAT.
There we have two settings,
1. Assign hierarchy to application.
   Make a new entry. Choose application Product and assign the hierarchy you
   have created.
2. Assign hierarchy to product type.
   In case you wish to have a separate hierarchy for each product type ( Material,
   Service, Warranty etc) than use this setting.
   Make new entry. Choose a product type and assign hierarchy to it.
Wish the information is useful. If it helps, do reward with points.
Regards,
Shalini Chauhan

PC-UI : Creating new Filed Group and link it to the screen

I have extended the Leads application in EEWB in CRM 4.0. I would like to bring the new fields in PCUI. How do I create a new field group containing the newly created fields, link it to the screen structure and generate the corresponding layout. Do I have to use CRMC_BLUPRINT transaction code at any point of time. An answer for a detailed approach would be rewarded with Maximum Points.
Thanks!
Suresh.

as it is custom fields use the tx:CRMC_BLUPRINT_C.
BTY when you add new fields via EEWB it will automatically generates fieldgroup and shows in the screen.
If you want to create your own fieldgroup goto above tx and you will find field group under application element.
Raj

How to create new cost groups in inventory org using API or open interface?

Hi,
I would be very kind of you if you can provide me with a solution to my question below.
I have a requirement of copying all the cost groups from one inventory org and creating the same cost groups in another inventory org using programmatically. Is there any API or Open interface that can be used to create the cost groups in the new inventory organization? If not can you suggest any other way of fulfilling this requirement?
I would highly appreciate your help.
Thanks,
Ranajit

hi,
think, it's not possible.
look here:
http://help.sap.com/saphelp_47x200/helpdata/en/4f/71e05a448011d189f00000e81ddfac/frameset.htm
"The field groups and their respective fields are defined in system tables"
kind regards
Andreas

HOW TO - Create new from clipboard and process multiple files - please help

Need help - have new version of photoshop on trial only ATM...
Want to know - HOW TO:
1. Create new from clipbaord
2. Process multiple files
Please help.

For clipboard copy, I start with File > New and the size will be set to what's in the clipboard. Then once the new file is opened, Edit > Paste will place the clipboard contents as a layer in the new document.
You must remember to use the command Layer > Flatten Image of you want to save as jpeg or any other file format that doesn't support layers.
For processing multiple files,
File > Automate > Batch or
File > Scripts > Image Processor...
Check the User guide or google information for those commands if you have specific needs.
Gene

How to Create new Lookup Type and look up codes within it.

Hi,
I need to create a Poplist.
I want the View Object(to be associated with the poplist) to fetch the value from a new look up type and lookup codes as mentioned below.
How to create these in the APPS?
Lookup Type
RATINGS
LookupCode Meaning
A Very Good
B Good
C Satisfactory
D Bad
Please tell me how can i create the above mentioned Lookup Type and codes ?
thanks,
Gowtam

I have one more doubt regarding the AM to be associated with the poplist and that with the page and choice box within it.
The ViewObject for the poplist belongs to the package <xyz>.oracle.apps.employee.poplist.server.
My questions are
1.What should be the AM property for PageLayoutRN?
- is it oracle.apps.fnd.server.OAApplicationModule(as in HelloWorld)
OR
- is it <xyz>.oracle.apps.employee.poplist.server (view objects AM)
2.What should be the AM property for the Choice?
- do I need to assign it to <xyz>.oracle.apps.employee.poplist.server
OR
- leave it blank?
Please clarify my doubts.
Thanks,
Gowtam

How to create new file extension and associate an application with it?

Hi,
I want to create a new file extension named ".emsof" and
associate any text editor with it like notepad++ in windows 8.1
Moreover all of these files should be searched by having filter of "*.emsof" like any other ordinary files.
Please guide me about hoe to do it?
Thanks.

Hi BurrWalnut,
Thanks for the help.
Will this command also allow me create and save file with .emsof extension and to filter files through .emsof extension (Like we can filter through .doc or .txt extension)???
1. I don’t know what you mean by ‘filter’. In your initial post you mentioned searching, if that’s what you mean, you can search for any extension.
2. An easy to understand example of the assoc and ftype commands is a .txt file, which we all use in Notepad:
Typing assoc .txt in a cmd prompt will return txtfile (the file type).
Typing ftype txtfile will return %SystemRoot%\System32\notepad.exe %1 (the full path of the program and %1 representing a passed parameter).
Alternatively, look in the registry hive HKEY_CLASSES_ROOT for .txt and further down for txtfile.
3. If you add an entry that is later unwanted, you can easily delete it by typing assoc .emsof= and pressing Enter. Then delete the filetype by typing ftype myext= and pressing Enter. You can, of course, just delete the entries in the registry (nor recommended
for beginners).
4. Test it out now but be aware not to use extensions or filetypes that currently exist.
5. Display all extensions and their associated file types by firstly copying the following 4 lines:
assoc >"%userprofile%\desktop\assoc.txt
start notepad "%userprofile%\desktop\assoc.txt
exit
cls
Press the Windows Logo key+X (or right-click or press and hold the bottom left corner) and choose Command Prompt/Windows PowerShell (Admin). Using the mouse right-click, paste the 4 copied lines to the Command Prompt window. A .txt file is created on the Desktop
and Notepad will open and display the list. The list represents the registry keys located in the merged HKEY_CLASSES_ROOT. In the left pane, look for the extension, for example .txt. The (Default) field in the right pane contains the file type, e.g. txtfile.
6. Now display all file types and their associated programs by substituting the above 4 lines with these:
ftype >"%userprofile%\desktop\ftype.txt
start notepad "%userprofile%\desktop\ftype.txt
exit
cls
Another .txt file is created on the Desktop and Notepad will open and display it. This list represents the registry keys in HKEY_CLASSES_ROOT further down beyond the extensions. Look for the file type, for example txtfile, then click or tap shell\open\command.
In the right pane, the (Default) field shows the full path of the program that opens it, e.g. notepad.
7. NOTE. In operation, any keys in HKEY_CURRENT_USER\Software\Classes (current user) take precedence over those in HKEY_LOCAL_MACHINE\Software\Classes (all users) and both keys appear as the merged HKEY_CLASSES_ROOT. Any changes should be made to HKCU and
HKLM. The HKEY_CLASSES_ROOT keys are intended to be read from, not written to.

How to create new user account and delete old one?

Greetings,
we have wanted to change our alias on the discussions group but understand from the frequently asked questions section that,
"Once you create an alias, you cannot make changes to it. If you want to change your alias, you will need to create a new User Account".
However it does not go on to tell us specifically how to now set up a "new User Account". Could someone specify how to do this? And if we do this, how would we then delete the current User Account? Thank you.
Chris

Colleen Von Eckartsberg wrote:
Thanks for the reply.
However I am still confused. I originally thought the "user account" referred to an account specific to the Discussions Forums, not the general "Apple ID" however your email seems to suggest they are one and the same....Please clarify.
If so, however I do not think I am able to change my Apple ID. As I am a mobile me user I am required to us my mobile me address for my apple ID.....and do not think I can have two ID's with the same mobile me address.....
Any additional thoughts are appreciated. Thanks.
Chris
Not with the same Primary address, but you can use your MM address as a secondary one. That is how I have my 2 Apple IDs setup. 1 uses my Dot Mac address and the other uses an ISP address as the Primary with the latter having my Dot Mac address as an alternate address.
Warning, even if you create a new account, you won't be able to use your current ALIAS with the new account.

How to create new purchasing group in EBP

Hi All,
I am working in Extended Classic Scenario..
I have one doubt regarding Purcashing group creation.
Can someone tell me, from where the purchasing group get determined in EBP.
Do we create Purchasing group in EBP , if yes then How? or it get determined by backend through Function module ?
Looking forward for the answer.
Regards,
Sheetal

Hi,
Purchasing group we can create throguh PPOCA_BBP T-CODE . before creation of purchasing group you have to create purchasing orgnisation under this you can create purchasing org.
Once you create one org under purchasing org then go to Function tab in details their select purchasing group option and mention the purchsing group.
In resopnsilbilty tab you have to mention which orgnisation pr position is resopnsible for this purchasing group
Thanks
Ravi

How to create new org.level and further actions?

Hi experts!
I need help on the follwing situation.
For better separation of industries for the marketing staff we do use the branch (e.g. food, energy, ...).
For that we want to adjust the authorizations to branch specific.
The questions are:
1) Is it possible to create a new organisational level "branch"?
2) If I have a new org.level I think I have to adjust existing authorization objects. Do I only have to extend the belonging auth.objects with the new org.level?
3) What else do I have to do if a new org.level branch is created to check authorizations on that?
Thanks for your help in advance.
Regards,
Alex

If I read your question correctly I think you want to create a new authorization field. To get that to work you'd need to adapt a lot of software. Definately not a path to follow.
All authorization cheecks need to hard-coded into the software. Changing SAP standard software is something one wants to stay away from as long as possible. It'll keep haunting you when patching, upgrading etcetera.
If you want to 'upgrade' an existing field to become organizational a forum serach on PFCG_ORGFIELD_CREATE should give you pointers.

Creation of new employee groups and sub groups

Hi All,
What all the steps should I follow to create new employee groups and sub groups? and How many structures should I create for this?
Its urgent pls.......
Good replies will be rewarded!!!!
Regards,
Sita

Hi
You can create the employee groups depending up on your clients requirement, Eg: Permanent, Temporary, Seasonal, Trainee, Advisor etc
And define the employee subgroups and assign them to the employee groups Like
Enterprise structure>Definition>Human Resource Management-->Employee Groups & Employee Groups
Enterprise structure>Assignment>Human Resource Management-->Assign employee subgroup to employee group
you can create employee subgroups depending up on your requirement like asst manager, manager, GM, MD, VP ETC an assign them to the employee subgroups ok.
Ensure that certain empployee subgroups may not be assigned to employee group based on requiremen, but create all the employee sub groups which is existing in the organization.
Regards

Creating new Material Group

Hi SAP Gurus,
How to Creating new Material Group?
Regards,

Hi,
Go to OMSF and here click on "New Entries" button and maintain the Material Group and its Description and save.
Config Path: - SPRO > Logistics - General > Material Master > Settings for Key Fields > Define Material Groups

How to create new storage group and mailbox database on exchange 2007 CCR

Similar Messages

Maybe you are looking for