How to create new subtypes for OM infotype 1002?

Gurus,
            I have a requirement to create four new subtypes (to different texts ) for OM infotype HRP1002.
Let me know the procedure to achieve this.
I looked in subtype table T591A and T591S, but couldn't find any subtype (even the standard ones like 0001,0002,0003 etc) for 1002 infotype.
Thanks,
Amit Jain

Hi Amitkumar Jain,
I am also facing same problem, i need create Infotyes with Subtypes in OM.Check below steps how i created
1. I create Structure in se11.    HRI9119
2.  In PPCI , i create infotype 9119
3.In SM30 ,  I Maintain table  T777i,  here i selected my infotype (9119),  then i clicked  on infotype per object type and assign    subtype (9229, 9339) to the my infotype .
4.   After that, in same screen, i selected my infotype  and assign TIME CONSTANT to my all subtype and infotypes.
After this , any think required to maintain , Plz tell me.. i didn't find my subtype in  PP01.
Thanks and Regards ,
Venkatesh.M

Similar Messages

  • Re: How to create new subtypes for OM  Custom infotype

    Hi Gurus,
    I  facing  problem when creating for Subtypes in  OM , i need create Infotyes with Subtypes in OM.Check below steps how i created
    1. I create Structure in se11. HRI9119
    2. In PPCI , i create infotype 9119
    3.In SM30 , I Maintain table T777i, here i selected my infotype (9119), then i clicked on infotype per object type and assign subtype (9229, 9339) to the my infotype .
    4. After that, in same screen, i selected my infotype and assign TIME CONSTANT to my all subtype and infotypes.
    After this , any think required to maintain , Plz tell me.. i didn't find my subtype in PP01.
    Thanks and Regards ,
    Venkatesh.M

    Hi Venkatesh,
    The new subtype has to be maintained in table V_778U.Also you need to relate the new subtype to object type in table T777Z and miantain the time contraints.
    Please refer following path in IMG for further information
    Personnel Mgt > OM > Basic settings > Data model enhancement
    Hope this helps.
    Regards,
    Malathi V.

  • How to create new scope for SharePoint calendar?

    How to create new scope for SharePoint calendar?
    I have a calendar list to which I want to create following scopes-
    Annual View
    Half Year 1 (Jan-June)
    Half Year 2 (Jul-Dec)
    Quarter 1 (Jan-Mar)
    Quarter 2 (Apr-Jun)
    Quarter 3 (Jul-Sep)
    Quarter 4 (Oct-Dec)
    How this can be created. Any help appriciated. Thanks.

    Hi Pratima,
    Can you please see below link and code snippet for how to
     format date in gridview.
    http://www.aspdotnet-suresh.com/2011/05/how-to-set-date-format-in-gridview.html
    <html xmlns="http://www.w3.org/1999/xhtml">
    <head runat="server">
    <title>Gridvew Date format</title>
    </head>
    <body>
    <form id="form1" runat="server">
    <div>
    <asp:GridView runat="server" ID="gvdetails" DataSourceID="dsdetails" AllowPaging="true" AllowSorting="true" AutoGenerateColumns="false">
    <RowStyle BackColor="#EFF3FB" />
    <FooterStyle BackColor="#507CD1" Font-Bold="True" ForeColor="White" />
    <PagerStyle BackColor="#2461BF" ForeColor="White" HorizontalAlign="Center" />
    <HeaderStyle BackColor="#507CD1" Font-Bold="True" ForeColor="White" />
    <AlternatingRowStyle BackColor="White" />
    <Columns>
    <asp:BoundField DataField="Date1" HeaderText="Date1" HtmlEncode="false" DataFormatString="{0:s}" />
    <asp:BoundField DataField="Date2" HeaderText="Date2" HtmlEncode="false" DataFormatString="{0:D}" />
    <asp:BoundField DataField="Date3" HeaderText="Date3" HtmlEncode="false" DataFormatString="{0:m}" />
    <asp:BoundField DataField="Date4" HeaderText="Date4" HtmlEncode="false" DataFormatString="{0:d}" />
    <asp:BoundField DataField="Total" HeaderText="Total" HtmlEncode="false" DataFormatString="{0:C2}" />
    </Columns>
    </asp:GridView>
    <asp:SqlDataSource ID="dsdetails" runat="server" SelectCommand="select * from DateFormat" ConnectionString="<%$ConnectionStrings:dbconnection %>"></asp:SqlDataSource>
    </div>
    </form>
    </body>
    </html>
    Hope this will help you.
    Regards
    Soni K

  • How to create new version for material

    Hi expert,
    Can anyone please guide me step by step on how to create new version for material and vendor? Please also mention transaction and details step by step.
    Thanks

    HI,
    Do you mean to have version management for purchasing documents?.
    Best Regards,
    Arminda Jack

  • How to Create New Application for iPhone

    Hi,
    Can anyone guide me how to create New Applications for the iPhone.
    Regards,
    Mustafa Ali Qizilbash

    If you think Apple's is making a profit off the $99 it collects for the iPhone Developer Program membership, you're badly underestimating how much it costs to run the program.

  • How to create new structure for SOP?

    How to create new structure for SOP? and transfer data for long term planning?

    hi dear
    For SOP there are two types
    1. Standard SOP : this the standard SOP  configured by SAP consider the Level by Level planning and planning done for product group .
    2. Flexible planning SOP: this option is given, so that Rough planning/SOP planning can be done as per the client requirement.e.g planning structure can be sales orgn., distribution channel, division, plant, material
    For configuring the flexible planning SOP follow steps
    1. Define info structure in IMG
    where u define the characteristic and Key field
    2. Set parameters for info structures and key figures
    Sales & Operations Planning >Master Data>Set parameters for info structures and key figures
    where u define  Planning method
    Consistent planning
    Level-by-level planning
    Delta planning
    and aggregation type
    1. Average calculated
    2. Total created
    3. No aggregation
    3. create Planning type with reference to info structure
    Regards
    Suresh

  • How to create new subtype to 0713 Termination?

    Dear all,
    I want to add a new sub type to 0713 Termination. I know that using PM01 to create subtype for Infortype but I don't know how to do this .
    And when I Open Table T5F99T0 , I  don't saw any Subtype on this .
    Please help me to do this step by step.
    Thanks you so much
    Huyen Nguyen

    Hi,
    Go to the table view-V_T591A & enter the infotype-0713.The creation of subtype screen will display.Here you can create the sub-type of the defined infotype.
    Snita...

  • Creating subtypes for description infotype(1002) in OM

    Hi,
    How can we create subtype for infotype 1002(Description) in OM?
    With Regards,
    Kaustuv Goswami.

    Check if you have defined your subtype for all the object types. This can be done by defining the object type as required(if you want the description for a position, put the object type as S, if it is for Org Unit as  "O" etc) in table T777Z.
    Hope this helps.
    K

  • ALE/IDOC-How to create Change Pointers for Custom Infotype

    Hi,
    My requirement is to transfer custom OM infotype changes using IDOCs.
    But its not creating any change pointers for that infotype.
    The message used is a copy of standard message OM_HRMD_A.
    Can any one please help me out in this issue.
    Thanks,
    Sarika

    Hi Sarika,
    How did you solve this issue? We are also facing a similar problem, it will be helpful if you could explain how you found out the solution.
    Thanks
    Anu.

  • How to create new rules for agent assignment

    Hi all,
    I have a situation in which the esclation has to occur to the second line manager . is there any rule avail. for agent assignemnt and if not how I can creaet a new rule
    Thanks in advance..

    Hi,
    One way is you can call SWX_GET_MANAGER function module twice for getting your manager's manger.
    For creating new rule, you can copy any std rule and themn modify the copied rule using txn PFAC. e.g check out rule - 00000168, which uses above mentioned FM - SWX_GET_MANAGER .
    Hope this helps.
    Regds,
    Akshay

  • How to create new INDEX for TREX

    Hello Experts,
    Iam new to this KM and TREX so need ur guidance for this...
    I need to create an INDEX for TREX, so after going through various messages i found that it can be created form the Index Administration iView portal----System Administration -> Syetm Configuration -> Knowledge Management -> Index Administration -> New Index
    But iam not getting the above path in SPRO OR how to run Index Administration iView OR from which portal i need to create an INDEX??can anyone provide steps on how to go to System Administration -> Syetm Configuration -> Knowledge Management -> Index Administration -> New Index
    path.....
    Regards.

    I'm not very familiar with CRM business partners, but the common way - to include the repository where the documents are stored to the KM using [CM Repository managers|http://help.sap.com/saphelp_nw04/helpdata/en/e3/923227b24e11d5993800508b6b8b11/frameset.htm].
    You need first to create a repository manager for you repository and only then you'll be able to create an index.
    Regards, Mikhail.

  • How to create New columns for the Internal Table Dynamically?

    HI Guys,
                          In my logic i have to create new columns depending on the logic which i am executing.
    My requirement is .I have to display o/p like this
    Material || Year || Period  ||  Mix ratio || Vendor ||Mix Ratio || Vendor || Mix Ratio Vendor || Mix ratio || Vendor || Mix ratio.............................from table's CKMLMV003 and CKMLMV001.Her i have to display the o/p in the above format and i have to display Vendor and Mix Ratio for 5 columns irrespective of data .If i have more than 5 columns for any record then i have to create a New columns dynamically for Vendor and Mix ratio.If anybody want my code i can Submit But plz tell with example how to do?
                    <b>The O/P must be finally shown in ALV Grid</b>
    Thanks,
    Gopi

    You must create the entire internal table dynamically, you can not add columns to a statically define internal table.  Here is an example of creating a dynamic internal table.
    Creation of internal table dynamically based on the Date Range entered
    Regards,
    Rich Heilman

  • How to create new user for OBIEE presentation service

    Hello Guys
    I now only have 2 users on my OBIEE, demo1, demo2.. Now I'd like to create a new user call A and make this new user able to log on to OBIEE presenation service..
    So I went to the RPD admin tool and created new user there and gave password. It was done online mode and I checked out..
    I am able to login to admin tool with the new user account, but when I go to presentation service, I am not able to see this new user nor would I be able to log on using the new user account..
    So how does this work? If I wanted to create a new user and let it access dashboard, I'd I do it
    Any pointer will be greatly appreciated
    Thanks

    Hi.
    actually there is no option available in presentation service to create user. There you can just delete user and create and delete the groups.
    Anyhow, you said you have created a user in rpd.
    To see this user in answers, you must login into answers with this user once.
    are you able to login with the newly created user?
    (As you said you done the creation of user in online mode, this may not effect to the answers)
    if not, just login with administrator into answers, click on reload server metadata, then log off from there.
    Now, try to login with the new user. You may able to login.
    OR
    just restart your BI Server services.

  • How to create new group for material type

    Hello all experts,
    Im unable to create a new group for materials types, diff groups for FG and raw materials material type??
    Could you pls help ??
    Thanks in advance.

    Hi
    When you create a new material you have to specify the material types like finished goods or raw material like that in the initial screen
    For this new material types can be defined in
    SPRO -> Logistic - General -> Material Master -> Basic Settings -> Material Type ->Define attribute of material Type
    T code OMS2
    After specifying the material type and giving organizational data like plant, storage location,sales org etc we go on to create the material
    In one of the tabs the material groups should be specified and from MM point of view it is a reqd entry
    this can be defined in
    Define Material Group
    SPRO -> Logistic - General -> Material Master -> Setting for Key Field -> Define Material Group
    T .Code: OMSF
    I beleive this is what you are asking about
    Regards
    Raja

  • How to create new supply for demand if already supply exists.

    We have 2 orders for 1 item. One for Domestic and other for Export. Item already have existing qty in onhand, and we dont want ASCP to see that and want to create new planned order(Supply)...This is for perticular item.
    Please help ASAP.

    what if you created safety stock for the item?
    what if you create a non net sub inventory that isn't included in the plan and transfer the on hand you dont want ASCP to see into this S.I?
    hope this helps

Maybe you are looking for