How to create new table using pertioned table
hi,
i am using a partitioned table , now i want to craet a new table with same structure of my existing partitioned table.
so can i use this syntax
create table abc_new as
select * from my_partitioned_table
where 1=2;
if i use this syntax would it make same structure of my existing partitioned table ?
and
when
we use syntax like
create table abc_new as
select * from my_partitioned_table
where 1=2;
so would it make also indexing on new table to if old table exists ? if not so how can we create that indexing too at time of running this syntax ?
reagrds
No.
Although the command would create a new table with the same column names and datatypes, it would NOT be a partitioned table. You must explicitly specify the PARTITION BY clause and Partition definitions when creating the table.
Similarly, index definitions are not copied automatically. You must explicitly run the CREATE INDEX statements (which you can generate from the source using DBMS_METADATA.GET_DDL or using any other tools/utilities).
(However, if you use Export-Import -- e.g. importing to another schema or to another database, it would create a partitoned table with the same name and with the same index definitions).
Hemant K Chitale
Similar Messages
-
Please follow the scenario:
using C#
1) current database file name is DB20122013.
when user click on new year button
2)Create backup copy of current database
3)New database should create with all table(excluding table "Dailytemp" and "DailyMain") with data and database name as DB20132014.
Musakkhir Sayyed.Hi,
I hope, below stored procedure is useful for your scenario.
CREATE PROC Create_New_Database
( @DBNAME VARCHAR(550)
)AS
Test : Exec [Create_New_Database] @DBNAME='DB20122013'
BEGIN TRY
SET NOCOUNT ON
DECLARE @sql VARCHAR(MAX), @DBNAME_NEW VARCHAR(550),@num int
IF EXISTS(SELECT 1 FROM sys.databases WHERE name=@DBNAME) AND ISNUMERIC(RIGHT(@DBNAME,4))=1
BEGIN
SELECT @num= RIGHT(@DBNAME,4)
SELECT @DBNAME_NEW='DB'+CAST(@num AS VARCHAR(10))+''+CAST(@num+1 AS VARCHAR(10))
IF EXISTS(SELECT 1 FROM sys.databases WHERE name=@DBNAME_NEW)
BEGIN
SELECT @DBNAME_NEW+' database already exists'
END
ELSE
BEGIN
SET @sql='USE '+@DBNAME+' '+' backup database '+@DBNAME+' to disk = ''C:\'+@DBNAME+'.bak'' '
+' restore database '+@DBNAME_NEW+' from disk = ''C:\'+@DBNAME+'.bak'''
+' with move '''+@DBNAME+''' to ''C:\'+@DBNAME+'_data.mdf'' ,
move '''+@DBNAME+'_log'' to ''C:\'+@DBNAME+'_log.log'''
EXEC (@sql)
SET @sql=''
SET @sql=' USE '+@DBNAME_NEW+' IF EXISTS(SELECT 1 FROM SYS.TABLES WHERE NAME=''Dailytemp'')
BEGIN DROP TABLE Dailytemp END IF EXISTS(SELECT 1 FROM SYS.TABLES WHERE NAME=''DailyMain'')
BEGIN DROP TABLE DailyMain END '
EXEC (@sql)
END
END
ELSE
BEGIN
SELECT 'Database is now found or Database name does not mach the scenario'
END
SET NOCOUNT OFF
END TRY
BEGIN CATCH
DECLARE @ErrorMessage NVARCHAR(4000)
DECLARE @ErrorSeverity INT
DECLARE @ErrorState INT
SELECT @ErrorMessage = ERROR_MESSAGE(), @ErrorSeverity = ERROR_SEVERITY(),@ErrorState = ERROR_STATE()
RAISERROR (@ErrorMessage,@ErrorSeverity,@ErrorState )
END CATCH;
GO
Regards,
RAMBHARATH -
How to identify new records in a table using OBIEE
Hi,
I have price change table as and when a record comes into this table i have to generate an alert. Then show a report with the price changes on which i can invoke an action to go into my transactional system to make the chnage. And once the change is made the process again starts to look for any new price chnage records that are recieved.
Could anyone pls tell me how to identify new records in a table.
RgdsSELECT ID, LastName, FirstName,
RANK() OVER (PARTITION BY LastName,
FirstName ORDER BY ID) AS SeqNumber
FROM
(SELECT ID, LastName, FirstName
FROM Customers
WHERE (LastName, FirstName) IN
(SELECT LastName, FirstName
FROM Customers
GROUP BY LastName, FirstName
HAVING COUNT(*) > 1) -
Create Report Painter using LIS table
Hi Expert,
I'n new in ECC version but I found we can create report painter using LIS table,
but I'm not success to create report without error or debug
Anybody have the documentation about it ? or tell me how it works ...
Please ..urgent...need to tell client about it..
ThanksHi,
I have not worked on it but you can try this out:
TCODE for report writer table is GRCT.
There You need to add your z fields in some pre-defined structure like CCSS and then activate the structure and then activate characteristics.
NOTE: 24 charcter is max. length for the characteristics.
Regards,
Harsh. -
How to create a partition on existing table?
Hey
Could some one please tell me on how to create a partition on existing table?Could some one please tell me on how to create a partition on existing table?
You can't - that isn't possible. Unless a table is already partitioned you can NOT create another partition on it.
You must either redefine the table as a partitioned table (using the DBMS_REDEFINITION package) or create a new partitioned table and move the data to its new partitions.
The choice will depend on how much data the existing table has and whether you can do it offline. -
How to create screen resolution in bdc table control
hi gurus
can anyone suggest me
how to create screen resolution in bdc table control
thanks®ards
mark.Hi ,
Using CTU_PARAMS table for screen resolution .
For this sample code.
This is for Transation FB60.
report ZZFB60
no standard page heading line-size 255.
tables t100.
PARAMETERS : p_file1 like rlgrap-filename,
p_doctyp like RF05A-BUSCS,
p_invdat like INVFO-BLDAT,
p_posdat like INVFO-BUDAT.
CONSTANTS : C_TRANS_FB60(4) VALUE 'FB60'.
*Parameter string for runtime of CALL TRANSACTION
data : l_option type ctu_params,
l_subrc type sysubrc.
DATA : l_mstring(150).
data accnt type char17.
data : day type char2,
month type char2,
year type char4,
date1 type char10,
date2 type char10.
data : cnt(2) TYPE n,
cnt1 type i,
fld(25) TYPE c.
data : begin of excel occurs 0,
fieldname(255) type c,
end of excel.
DATA:BEGIN OF it_mess OCCURS 0,
msgtyp(5),
lms(200),
msgv1(50),
END OF it_mess.
data: begin of t_record occurs 0,
BUKRS(004),
ACCNT(017),
XBLNR(016),
WRBTR1(016),
WAERS(005),
SECCO(004) ,
SGTXT(050),
HKONT(010),
WRBTR2(017),
MWSKZ(002),
GSBER(004),
KOSTL(010),
end of t_record.
*Internal Table for Header Data
DATA : BEGIN OF t_head OCCURS 0,
BUKRS(004), "Company Code
ACCNT(017), "Account or Vendor
XBLNR(016), "Reference
WRBTR1(017), "Amount in document currency
WAERS(005), "Currency
SECCO(004), "Section Code
SGTXT(050), "Text
END OF t_head.
*Internal table for Item Data
DATA : BEGIN OF t_item OCCURS 0,
ACCNT(017), "Account
HKONT(010), "GL Account
WRBTR2(017), "Line item Amount in document currency
MWSKZ(002), "Tax Code
GSBER(004), " Business Area
KOSTL(010), "Cost centre
END OF t_item.
DATA: IT_BDCDATA LIKE BDCDATA OCCURS 0 WITH HEADER LINE,
IT_BDC_MESSAGES LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
*include bdcrecx1.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file1.
PERFORM file_selection.
PERFORM data_upload.
PERFORM table_control.
start-of-selection.
l_option-defsize = 'X'.
l_option-dismode = 'A'.
l_option-updmode = 'S'.
day = p_invdat+6(2).
month = p_invdat+4(2).
year = p_invdat+0(4).
concatenate day month year into date1 SEPARATED BY '.'.
day = p_posdat+6(2).
month = p_posdat+4(2).
year = p_posdat+0(4).
concatenate day month year into date2 SEPARATED BY '.'.
*perform open_group.
loop at t_head.
CLEAR IT_BDCDATA.
REFRESH IT_BDCDATA.
perform bdc_dynpro using 'SAPLACHD' '1000'.
perform bdc_field using 'BDC_OKCODE' '=ENTR'.
perform bdc_field using 'BKPF-BUKRS' t_head-bukrs.
perform bdc_dynpro using 'SAPMF05A' '1100'.
perform bdc_field using 'BDC_OKCODE' '/00'.
perform bdc_field using 'RF05A-BUSCS' p_doctyp.
perform bdc_field using 'INVFO-ACCNT' t_head-accnt.
perform bdc_field using 'INVFO-BLDAT' date1.
perform bdc_field using 'INVFO-BUDAT' date2.
perform bdc_field using 'INVFO-XBLNR' t_head-xblnr.
perform bdc_field using 'INVFO-WRBTR' t_head-wrbtr1.
perform bdc_field using 'INVFO-WAERS' t_head-waers.
perform bdc_field using 'INVFO-SECCO' t_head-secco.
perform bdc_field using 'INVFO-SGTXT' t_head-sgtxt.
cnt = 1.
cnt1 = 1.
loop at t_item where accnt = t_head-accnt.
*if cnt > 4.
*cnt = 4.
*endif.
if cnt1 gt 1.
CONCATENATE 'ACGL_ITEM-MARKSP(' cnt ')' INTO fld.
perform bdc_field using fld 'X'.
perform bdc_dynpro using 'SAPMF05A' '1100'.
perform bdc_field using 'BDC_OKCODE' '=0005'.
endif.
perform bdc_dynpro using 'SAPMF05A' '1100'.
perform bdc_field using 'BDC_OKCODE' '/00'.
CONCATENATE 'ACGL_ITEM-HKONT(' cnt ')' INTO fld.
perform bdc_field using fld t_item-hkont.
CONCATENATE 'ACGL_ITEM-WRBTR(' cnt ')' INTO fld.
perform bdc_field using fld t_item-wrbtr2.
CONCATENATE 'ACGL_ITEM-MWSKZ(' cnt ')' INTO fld.
perform bdc_field using fld t_item-mwskz.
CONCATENATE 'ACGL_ITEM-GSBER(' cnt ')' INTO fld.
perform bdc_field using fld t_item-gsber.
CONCATENATE 'ACGL_ITEM-KOSTL(' cnt ')' INTO fld.
perform bdc_field using fld t_item-kostl.
perform bdc_field using 'BDC_CURSOR' fld.
*CONCATENATE 'ACGL_ITEM-MARKSP(' cnt ')' INTO fld.
*perform bdc_field using fld 'X'.
cnt1 = cnt1 + 1.
*cnt = cnt + 1.
*if cnt > 1.
*perform bdc_dynpro using 'SAPMF05A' '1100'.
*perform bdc_field using 'BDC_OKCODE' '=0005'.
**perform bdc_field using 'BDC_OKCODE' '=0006'.
*endif.
endloop.
perform bdc_dynpro using 'SAPMF05A' '1100'.
perform bdc_field using 'BDC_OKCODE'
'=BS'.
perform bdc_dynpro using 'SAPMSSY0' '0120'.
perform bdc_field using 'BDC_OKCODE'
'=BU'.
*perform bdc_transaction using 'FB60'.
CALL TRANSACTION C_TRANS_FB60 USING IT_BDCDATA options from l_option
MESSAGES INTO IT_BDC_MESSAGES.
perform error.
perform errordownload.
endloop.
*perform close_group.
*Form data_upload
FORM data_upload .
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
FILENAME = p_file1
FILETYPE = 'DAT'
TABLES
DATA_TAB = t_record.
ENDFORM. " data_upload
*Form file_selection
FORM file_selection .
CALL FUNCTION 'F4_FILENAME'
EXPORTING
program_name = syst-cprog
dynpro_number = syst-dynnr
field_name = 'p_file1'
IMPORTING
file_name = p_file1.
ENDFORM. " file_selection
Form BDC_DYNPRO
FORM BDC_DYNPRO using program dynpro.
CLEAR IT_BDCDATA.
IT_BDCDATA-PROGRAM = PROGRAM.
IT_BDCDATA-DYNPRO = DYNPRO.
IT_BDCDATA-DYNBEGIN = 'X'.
APPEND IT_BDCDATA.
endform.
*Form BDC_FIELD
FORM bdc_field using fnam fval.
CLEAR IT_BDCDATA.
IT_BDCDATA-FNAM = FNAM.
IT_BDCDATA-FVAL = FVAL.
APPEND IT_BDCDATA.
ENDFORM.
Table Control
FORM table_control .
LOOP AT t_record.
ON CHANGE OF t_record-accnt.
MOVE-CORRESPONDING t_record TO t_head.
APPEND t_head.
ENDON.
loop at t_head.
t_item-accnt = t_head-accnt.
t_item-hkont = t_record-hkont.
t_item-wrbtr2 = t_record-wrbtr2 .
t_item-mwskz = t_record-mwskz .
t_item-gsber = t_record-gsber .
t_item-kostl = t_record-kostl.
APPEND t_item.
endloop.
If t_record-level = 'H'.
t_head-bukrs = t_record-text1.
t_head-accnt = t_record-text2.
t_head-xblnr = t_record-text3.
t_head-wrbtr1 = t_record-text4.
t_head-waers = t_record-text5.
t_head-secco = t_record-text6.
t_head-sgtxt = t_record-text7.
APPEND t_head.
else.
t_item-accnt = t_head-accnt.
t_item-hkont = t_record-text1.
t_item-wrbtr2 = t_record-text2.
t_item-mwskz = t_record-text3.
t_item-gsber = t_record-text4.
t_item-kostl = t_record-text5.
APPEND t_item.
endif.
ENDLOOP.
ENDFORM.
FORM error .
LOOP AT IT_BDC_MESSAGES.
IF IT_BDC_MESSAGES-msgtyp = 'E'.
SELECT single * FROM t100 WHERE
sprsl = it_BDC_MESSAGES-msgspra
AND arbgb = IT_BDC_MESSAGES-msgid
AND msgnr = IT_BDC_MESSAGES-msgnr.
IF sy-subrc = 0.
l_mstring = t100-text.
IF l_mstring CS '&1'.
REPLACE '&1' WITH IT_BDC_MESSAGES-msgv1 INTO l_mstring.
REPLACE '&2' WITH IT_BDC_MESSAGES-msgv2 INTO l_mstring.
REPLACE '&3' WITH IT_BDC_MESSAGES-msgv3 INTO l_mstring.
REPLACE '&4' WITH IT_BDC_MESSAGES-msgv4 INTO l_mstring.
ELSE.
REPLACE '&' WITH IT_BDC_MESSAGES-msgv1 INTO l_mstring.
REPLACE '&' WITH IT_BDC_MESSAGES-msgv2 INTO l_mstring.
REPLACE '&' WITH IT_BDC_MESSAGES-msgv3 INTO l_mstring.
REPLACE '&' WITH IT_BDC_MESSAGES-msgv4 INTO l_mstring.
ENDIF.
CONDENSE l_mstring.
it_mess-msgtyp = IT_BDC_MESSAGES-msgtyp.
it_mess-lms = l_mstring.
it_mess-msgv1 = IT_BDC_MESSAGES-msgv1.
APPEND it_mess.
ELSE.
it_mess-msgtyp = IT_BDC_MESSAGES-msgtyp.
it_mess-lms = l_mstring.
it_mess-msgv1 = IT_BDC_MESSAGES-msgv1.
APPEND it_mess.
ENDIF.
ENDIF.
ENDLOOP.
ENDFORM.
form errordownload.
*down the internal table to excel file.
call function 'EXCEL_OLE_STANDARD_DAT'
EXPORTING
file_name = 'c:/Error.xls'
TABLES
data_tab = it_mess
fieldnames = excel
EXCEPTIONS
file_not_exist = 1
filename_expected = 2
communication_error = 3
ole_object_method_error = 4
ole_object_property_error = 5
invalid_filename = 6
invalid_pivot_fields = 7
download_problem = 8
others = 9.
endform.
Reward if useful
Regards,
Narasimha
Edited by: narasimha marella on May 13, 2008 12:12 PM -
How to create IDOC for customer defined table
hi,
How to create IDOC for customer defined table Records and how to send this IDOC to target system.
what message type will be used and on receiving system how to post these records.
thankx.
pillac.Hi,
You need to create a custom message type and custom IDOC type for this with whatever fields you want send. You need to create segments (WE30), IDOC type (WE30), Message types (WE81) and assign the message type to the IDOC type (WE82).
You will have trigger the IDOC using a Report or something after doing the partner profile settings.
Similary in the target system also, you will have do all the settings.
Take a look the links to find out what settings needs to be done.
http://help.sap.com//saphelp_470/helpdata/EN/0b/2a611c507d11d18ee90000e8366fc2/frameset.htm
http://www.sappro.com/downloads/OneClientDistribution.pdf
Regards,
Ravi
Note : Please mark the helpful answers and close the thread if the issue is resolved. -
How we can update cube using Change Tables as Source
I have created a cube using source tables. I have also created change table (feature of 9i) based on source table. which store new changes to souce table. I want to load cube using one mapping from source table or change table based on the validity of the change table.
Is that possible to do this? have anybody implemented change table to incremental load of cube?
Sanjiv TyagiHi Sanjiv,
I can think of 2 ways of doing this:
one is using a single mapping with a pre mapping process to determine whether the change table is valid. If yes the pre mapping process creates a view (that is also referenced in the mapping itself) on top of the change table (select * from change_table), if this is not valid then the view will be on the source table (select * from source). After this pre map process the mapping runs on which ever view exists and loads the data.
the second way is using process flow and 2 mappings. In PF you have a PL/SQL call that verifies which data to use. If the change table is correct, that will give success and uses the mapping on the change table. If the return is Error then you use the mapping on the source table.
I have not implemented these solutions, however I think these are 2 ways of getting it to behave like you would want to...
Hope this gives you some ideas,
Jean-Pierre -
How to create an arrow in a table
How to create an arrow in a table in numbers.
If you have plus or minus numbers, I want to know a green arrow on the increase is positively or a red arrow if it is negative numberMaybe something like this?
-
How to create t-code for a table and how to create transaction variant???
Hi,
I have created a custom table zsark.
Now my requirement is : I have to create a transaction variant zsark_var for sm30 and table zsark. I have to disable the output of the first screen. I have to assign the transaction variant to the transaction code of table zsark.
Now,
1. how to create transaction code to a table. Can any one give me the
staps??
2. how to create transaction variant for the above requirement???
Thanks & Regards,
SarkarHi
1 Goto SE93 transaction
2 Choose 5th option Transaction with parameters
3 Give transaction : SM30, Check Skip Initial Screen Press Enter
4 Goto Bottom left corner, click F4 select viewname, on right hand side give table name
5 Press one more time F4, choose update , mark it X on right side.
6 save the transaction.
Thanks
sandeep
reward if helpful -
How to create new XML file using retreived XML content by using SAX API?
hi all,
* How to create new XML file using retreived XML content by using SAX ?
* I have tried my level best, but output is coming invalid format, my code is follows,
XMLFileParser.java class :-
import java.io.StringReader;
import java.io.StringWriter;
import javax.xml.transform.OutputKeys;
import javax.xml.transform.Transformer;
import javax.xml.transform.TransformerConfigurationException;
import javax.xml.transform.TransformerException;
import javax.xml.transform.TransformerFactory;
import javax.xml.transform.dom.DOMResult;
import javax.xml.transform.sax.SAXSource;
import javax.xml.transform.sax.SAXTransformerFactory;
import javax.xml.transform.sax.TransformerHandler;
import javax.xml.transform.stream.StreamResult;
import org.w3c.dom.Document;
import org.xml.sax.Attributes;
import org.xml.sax.InputSource;
import org.xml.sax.SAXException;
import org.xml.sax.helpers.XMLFilterImpl;
public class PdfParser extends XMLFilterImpl {
private TransformerHandler handler;
Document meta_data;
private StringWriter meta_data_text = new StringWriter();
public void startDocument() throws SAXException {
void startValidation() throws SAXException {
StreamResult streamResult = new StreamResult(meta_data_text);
SAXTransformerFactory factory = (SAXTransformerFactory) SAXTransformerFactory.newInstance();
try
handler = factory.newTransformerHandler();
Transformer transformer = handler.getTransformer();
transformer.setOutputProperty(OutputKeys.ENCODING, "UTF-8");
transformer.setOutputProperty(OutputKeys.INDENT, "yes");
handler.setResult(streamResult);
handler.startDocument();
catch (TransformerConfigurationException tce)
System.out.println("Error during the parse :"+ tce.getMessageAndLocation());
super.startDocument();
public void startElement(String namespaceURI, String localName,
String qualifiedName, Attributes atts) throws SAXException {
handler.startElement(namespaceURI, localName, qualifiedName, atts);
super.startElement(namespaceURI, localName, qualifiedName, atts);
public void characters(char[] text, int start, int length)
throws SAXException {
handler.characters(text, start, length);
super.characters(text, start, length);
public void endElement(String namespaceURI, String localName,
String qualifiedName) throws SAXException {
super.endElement("", localName, qualifiedName);
handler.endElement("", localName, qualifiedName);
public void endDocument() throws SAXException {
void endValidation() throws SAXException {
handler.endDocument();
try {
TransformerFactory transfactory = TransformerFactory.newInstance();
Transformer trans = transfactory.newTransformer();
SAXSource sax_source = new SAXSource(new InputSource(new StringReader(meta_data_text.toString())));
DOMResult dom_result = new DOMResult();
trans.transform(sax_source, dom_result);
meta_data = (Document) dom_result.getNode();
System.out.println(meta_data_text);
catch (TransformerConfigurationException tce) {
System.out.println("Error occurs during the parse :"+ tce.getMessageAndLocation());
catch (TransformerException te) {
System.out.println("Error in result transformation :"+ te.getMessageAndLocation());
} CreateXMLFile.java class :-
Sax.startDocument();
Sax.startValidation();
Sax.startElement("", "pdf", "pdf", new AttributesImpl());
Sax.startElement("", "basic-metadata", "basic-metadata", new AttributesImpl());
String xmp_str = new String(meta_data.getByteArray(),"UTF8");
char[] xmp_arr = xmp_str.toCharArray();
Sax.characters(xmp_arr, 0, xmp_arr.length);
Sax.endElement("", "pdf", "pdf");
Sax.endValidation();
Sax.endDocument();
Sax.endElement("", "basic-metadata", "basic-metadata");* In CreateXMLFile.java
class, I have retreived the xml content in the meta_data object, after that i have converted into character array and this will be sends to SAX
* In this case , the XML file created successfully but the retreived XML content added as an text in between basic-metadata Element, that is, retreived XML content
is not an XML type text, it just an Normal text Why that ?
* Please help me what is the problem in my code?
Cheers,
JavaImranSax.startDocument();
Sax.startValidation();
Sax.startElement("", "pdf", "pdf", new AttributesImpl());
Sax.startElement("", "basic-metadata", "basic-metadata", new AttributesImpl());
String xmp_str = new String(meta_data.getByteArray(),"UTF8");
char[] xmp_arr = xmp_str.toCharArray();
Sax.characters(xmp_arr, 0, xmp_arr.length);
</code><code>Sax.endElement("", "basic-metadata", "basic-metadata");</code>
<code class="jive-code jive-java">Sax.endElement("", "pdf", "pdf");
Sax.endValidation();
Sax.endDocument();
* I HAVE CHANGED MY AS PER YOUR SUGGESTION, NOW SAME RESULT HAS COMING.
* I AM NOT ABLE TO GET THE EXACT OUTPUT.,WHY THAT ?
Thanks,
JavaImran{code} -
How to create dependent LOV in Advanced Table.
Hi,
How to create dependent LOV in Advanced Table. Pls help send me the steps.
Thanks in Advance,
Hanimi....Hi,
Not sure whether you need dependent LOV or dependent poplist. But anyways, you can refer the below link for Dependent LOV
http://oraclearea51.com/component/content/article/98-oa-framework/372-dependent-lov-in-oaf.html
and for Dependent Poplist refer the below link:
http://oraclearea51.com/component/content/article/98-oa-framework/370-dependent-poplist-in-an-advanced-table-in-oaf.html
Regards,
Sudhakar Mani
http://oraclearea51.com/sudhakarmani -
How we create new data base in oracle 10g express edition
hello every body.. i student of B tech n new user of oracle so please help me how we creat new data base in oracle 10g express edition
Hello, Oracle XE can not create more than one instance, the other editions yes, but like other editions XE allows you to create database schemas, schemas logically grouped objects like tables, views, indexes created by a user. By creating an Oracle user is associated with a schema of the same name.
Using SYS or system accounts for creating user accounts.
Syntax to create a user:
create user Your_user
IDENTIFIED BY password
default tablespace users;
grant connect, resources to your_user;
Edited by: rober584812 on Jun 25, 2010 9:03 PM -
How to create new or delete the existing row in the grid....
hi my friends...
i am developing report using Reuse_alv_grid_display...
my requirement is... At runtime
1. i may create new row on the grid (empty row inwhich i may enter the data).
2. i may delete a existing row in the grid
3. i may edit the existing data...
then i have to trace the modification in the grid in one internal table...
how can i get into this.....
note:
i have some idea to edit the existing record in the grid and trace those modification,
but i don't know abt how to create new or delete the existing row....
can you give me some idea...Hi deva,
write a class which implemets these methods
CLASS lcl_event_receiver DEFINITION.
PUBLIC SECTION.
METHODS:
To handle the toolbar on alv
handle_toolbar
FOR EVENT toolbar OF cl_gui_alv_grid
IMPORTING e_object e_interactive,
To handle the buttons on the alv grid
handle_user_command
FOR EVENT user_command OF cl_gui_alv_grid
IMPORTING e_ucomm.
endclass.
Now Implement these methods.
CLASS lcl_event_receiver IMPLEMENTATION.
To handle the toolbar on alv
METHOD handle_toolbar.
DATA ls_toolbar TYPE stb_button.
CLEAR gs_toolbar.
MOVE 3 TO gs_toolbar-butn_type.
APPEND gs_toolbar TO e_object->mt_toolbar.
CLEAR gs_toolbar.
PERFORM icon_create USING 'ICON_INSERT_ROW' gs_toolbar-icon.
MOVE text-010 TO gs_toolbar-function.
MOVE text-012 TO gs_toolbar-quickinfo.
MOVE ' ' TO gs_toolbar-disabled.
APPEND gs_toolbar TO e_object->mt_toolbar.
CLEAR gs_toolbar.
PERFORM icon_create USING 'ICON_DELETE_ROW' gs_toolbar-icon.
MOVE text-011 TO gs_toolbar-function.
MOVE text-013 TO gs_toolbar-quickinfo.
MOVE ' ' TO gs_toolbar-disabled.
APPEND gs_toolbar TO e_object->mt_toolbar.
ENDMETHOD.
METHOD handle_user_command.
In this form, check the function code(e_ucomm has the function code), based on that do the required action.
as i said yesterday(i.e for appending a row, deleting a row, modifying a row)
PERFORM user_command USING e_ucomm.
ENDMETHOD
endclass.
Before calling the alv method, create a object of this class.
DATA :
gref_event_receiver TYPE REF TO lcl_event_receiver,
gv_tables_alv TYPE REF TO cl_gui_alv_grid.
CREATE OBJECT gref_event_receiver.
SET HANDLER gref_event_receiver->handle_user_command
FOR gv_tables_alv.
SET HANDLER gref_event_receiver->handle_toolbar
FOR gv_tables_alv.
check this program for event handling, it is the similar way
demo_abap_objects_events
Hope u understood this.
Regards,
Prasant
reward if helpful -
How to create new .dat file and its contents?
Hi There
Can anybody let me know the procedure of how to create new .ctl or .dat file to load data to tables.
i working on 2day dba chapter 8. it shows me how to creat table and use .dat file to load data. but doesnot giv any clue how new .dat file and its contents can be created. please help.
thanks in advance.Thanks for ur help
I ve created txt file in notepad and saved it as dat file. tried to load that data thru Enterprise manager. used load data from User files everything went well and job was showing suceeded but dont know why that data is not showing in the table. i ve tried it now for three four times. used right table and pathe but dont know. has anybody got idea why that ll be?
Thanks
Maybe you are looking for
-
TV@nywhere Duo in MEGA180
Dear all, I'm using a Tv@nywhere Duo in a MEGA 180. I've installed everything according to the instructions, but get the error messages "Failed to initialize application. Program will be stopped now!" and "DTV card was not found" when I try to run th
-
Getting an error when connecting ipod to laptop
I have downloaded the latest version of iTunes and then when I plug in the iPod shuffle I get an error message about the version if music software is not compatible with my iPod and to try reinstalling it. Have tried reinstalling the software a few t
-
Hi Friends, I hav tried to create RFQ in ME41 Transaction.But In Messages tab Processing Date and time is not coming..In furtherdata tab actual processing is in display mode so that i am not able to set processing time and date. If anybody knows solu
-
The integrated bea workshop 10.1 is here
The integrated Workshop 10.1 is here! See Chris Hogue and Bill Roth's blog for an overview, and what's new, respectively. Here are all the bits for download: [url http://workshopstudio.bea.com/download.do?source=email_d2dnewsgroup]Workshop Studio 10.
-
hi all, Can anyone let me know how to display the number in the following manner thru sql query. Actual value is 20 Then the output to be : 00002000 if the value is 20.34 Then the output to be : 000020.34 Thanks in advance.