How to create one delivery for multiple sales order

Hi!! Friends,
Can some one explain the steps to be followed in creating one delivery for multiple sales order in SAP SD.
Regards
AKASH
Message was edited by:
        AKASH TAMBI

Hi.,
              You can combine different orders in to one delivery ,But for the customer Order combination should be checked in  the sales area data of the shipping tab,we can combine orders but the ship to party,Route,Inco terms,Shipping date,shipping point should be same,you can do in T.code VL04 & VL10
REWARD if helpfull
Thanks & Regards
Narayana

Similar Messages

  • How  to create one delivery for two sales orders?

    Hi Experts,
    I need to create one delivery for two sales orders. But it fails.
    The route, shipping point, ship to party are same for both orders but INCOTERMS are different.
    Delivery date, Good issue date, loading date,material availability date, transportation planning date for 1st order is 12/07/11 and for second order is 14/07/11.
    I have created delivery on 14/07/2011 but the delivery is created for 1st order only, the second order is missing in the delivery.
    It not happened because of incorterms.? different dates
    Kindly help regarding this.
    Thanks
    Raghu

    Hi
    To understand splitting behavior, see SAP Note 546668 - FAQ: Delivery split when creating deliveries. And yes, incoterms happens.
    I think that with the help of question 6 you can try to force the merging of SO. Then, see SAP Note 166397 - Delivery split according to customer field ZUKRL, and handling the field ZUKRL in a VOFM in the copy rule I think that you can try to do it.
    Finally See  Note 4505 - Duprec when adding delivery (VL04, VL01, VL10*) to avoid problems while you are merging.
    Regards
    Eduardo

  • One delivery for Multiple sales orders

    Dear friends,
    Am not able to do Single Delivery for Muktiple sales orders. Can you guide me what r the configuration settings i have to do on this?
    Regards,
    Madhav

    Am not able to do Single Delivery for Muktiple sales orders
    Have you searched the forum for this question as to why you were not able to generate ??  It could be due to multiple reasons.  Please search the forum and update here what steps you have taken after taking the inputs from here, if the problem is still not resolved.
    thanks
    G. Lakshmipathi

  • Auto-create delivery for multiple sales orders

    I would like to ask how to create auto-create 'single' delivery
    for multiple sales order during release sales order in R11i.
    It is found in my example during release sales order, multiple
    sales orders fulfill release sales order criteria, a single pick
    slip is generated but it is found that each sales order have
    individual delivery with it. It will casue multiple pack slips
    for a singles pick slip. Is it normal feature for auto-create
    delivery, or any setup to solve it?
    Thanks in advance.

    Am not able to do Single Delivery for Muktiple sales orders
    Have you searched the forum for this question as to why you were not able to generate ??  It could be due to multiple reasons.  Please search the forum and update here what steps you have taken after taking the inputs from here, if the problem is still not resolved.
    thanks
    G. Lakshmipathi

  • How to create one TO for multiple TRs

    Dear All,
    how to create one TO for multiple TRs, kindly suggest me
    Regards,
    balu

    As for your question: it is discussed in sAP online help:
    http://help.sap.com/saphelp_erp60_sp/helpdata/en/c6/f841f24afa11d182b90000e829fbfe/frameset.htm
    Sorry I misunderstood your question.
    The above mentioned solution won't create one single TO from multiple TR.
    Edited by: Csaba Szommer on Aug 11, 2010 9:46 AM

  • How to create an Invoice for the sales order using the T-Code VF01

    Hello Experts,
    How to create an Invoice for a sales order using the T-Code VF01?
    Thanks in advace,
    Suma

    hi,
    Make the following settings-
    1. Create sales document and billing type
    2. assign billing type in sales document type config VOV8
    3. Activate itemcategory as sales order related billing
    4. Maintain copy control header and item level between sales order and billing
    5. Maintain pricing procedure for sales order and billing
    6. Define Output procedure in case to print invoice
    Regards
    Goutham

  • SEPA file – how to create one file for multiple company codes

    Dear experts,
    My company has multiple company codes and they process automatic payments (F110) for multiple company codes in the same run.
    The company wants to generate one SEPA file for all company codes.
    In OBPM1  for SEPA format in the section ``Payment medium output devided by level of detail`` I unchecked everything (attached).
    OBPM4 for SEPA format is showing `` No separation of payment medium output``.
    Unfortunately, when I run automatic payments (F110) for multiple codes, multiple files for each company code are created.
    Can anyone let me know how it is possible to create one SEPA file that will contain payments for multiple company codes?
    Thank you

    Hi Zara,
    Please check in transaction DMEE your format tree (eg. SEPA_CT), 'DMEE tree: properties' - tab 'Sort/key field'. Is the Sort/key field 'ZBUKR' defined there with Level 1?
    Please follow the recommendation of note http://service.sap.com/sap/support/notes/1742584
    Regards,
    Emöke

  • How to generate one invoice for a sales order with product returns

    Hi All,
    I have a sales order that has been delivered and goods issue posted. Now the customer returns some of the product and I generated a Return using VA01 - document type RE, generated a returns delivery and posted a goods return.
    I need to generate an invoice that will only consider the quantities that were not returned.
    I have checked the sales process pertaining to returns, but all I have found consider generating a Credit Memo.
    Is there a way to generate an invoice that will only invoice the quantities that were not returned? Say I sold 10 pcs, and 2 were returned, so I want to invoice 8.
    Many thanks in advance.
    Oscar

    Hi Sandeep, Jyotsana, Goutham. Thank you all for your time and your replies.
    What is happenning here is that there is a vendor-client relationship where there is a constant flow of purchase orders, and the orders are large.
    I understand that it is standard SAP procedure, but in this case, it is not the most efficient. I have two alternatives the way I see it:
    1. Post the invoices according to SAP Standard, and then the Credit Memo.
    2. Reverse the Purchase Order.
    There are disadvantages with both alternatives:
    1. I get much more paperwork than I really need.
    2. When I get the returns, the delivery, picking and goods issue have been posted, and I would have to reverse all that. Not a very good Idea I think, especially if I have a purchase order with 150 different materials and I get a return of 2 items of one material.
    Again, thanks for your replies. From what you have told me I am thinking that what I'll need is to implement a User Exit or Badi.
    Best Regards,
    Oscar

  • Creating Returns Delivery for RMA (Sales order)

    Hi Experts,
    I have a buisness requirement to create a returns delivery for RMA entered.
    I tried out the function modules RV_DELIVERY_CREATE,
                                                 GN_DELIVERY_CREATE
                                                 SHP_VL10_DELIVERY_CREATE
    But i am not sure what are the exact parameters to be passed to this function modules
    Please provide any sample code if available used for the same.

    Hi,
    In GN_DELIVERY_CREATE, the messages are collected in tables XVBFS. The details have to be passed to XKOMLGN and VBSK_I.
    To get the delivery number, you have to use function module NUMBER_GET_NEXT. Number range object is 'RV_SAMMG'.
    Hope it helps.
    Sujay

  • How to create one node for multiple instances of hardware

    I want a single minor device node to act as the interface to all instances of my hardware, in this case a co-processor chip on the     PCI bus. For the number of chips found at boot time, I want requests to be dispatched, one per chip, in a round-robin. Is this possible?
    I suppose one approach to solving the problem could be to set a static flag in the xxattach function (accessible to xxattach only). In xxattach the flag is set after creating the first and only node and a list of the chips is built on subsequent calls to xxattach. Xxioctl calls would have the same minor number, which could be ignored, and the command dispatched to the next chip in the list. A single node solution is preferable to a driver modification.
    Thanks

    I think you're going about this backwards.
    Make the driver be a "normal" driver, with one instance per chip.
    Then make a user-space demon that round-robins requests between available hardware.
    Or have a second pseudo-driver handle arbitration.
    Either way, dont try to shoe-horn the driver framework from another OS, onto solaris. That's what I presume you meant by "A single node solution is preferable to a driver modification."

  • How to create one node for multiple cards?

    I want a single minor device node to act as the interface to all instances of my pci-cards.
    I have the same pci-cards(pcixxx, xxx).

    You may want to create minor nodes on the fly
    using cloning or makedevice() interface.
    WDD has an example on it in xx_open() section,
    I believe
    Regards,
         Cyril
    I want a single minor device node to act as the
    interface to all instances of my pci-cards.
    I have the same pci-cards(pcixxx, xxx).

  • How to create a single delivery for two sales orders?

    Hi Experts,
    I need to create one delivery for two sales orders. But it fails.
    The route, shipping point, ship to party are same for both orders but INCOTERMS are different.
    Delivery date, Good issue date, loading date,material availability date, transportation planning date for 1st order is 12/07/11 and for second order is 14/07/11.
    I have created delivery on 14/07/2011 but the delivery is created for 1st order only, the second order is missing in the delivery.
    It not happened because of incoterms.? different dates
    Kindly help regarding this.
    Thanks
    Raghu

    Prerequisite for Grouped delivery
    1. Header data should be same like Inco terms,Payment terms
    Go to VL10A
    Enter the sales order Numbers and execute
    Select the sales order Nos  for the group delivery and select "Background"  Tab in Tool Menu Bar
    If delivery is created coloured line items will get generated
    Check the log for delivery docuements
    Check and confirm
    Senthils

  • One delivery for multiple STO's

    Folks,
    I have multiple STO's for the same ship-to (plant). Items due for shipping would need to be combined into 1 delivery and not 1 delivery per STO.
    Would this be possible? And if yes, how?
    Thanks,
    MZ

    Hi ,
    Yes , We can create one delivery for multiple PO's .
    Go to VL10D tcode --> Purchase order tab -- > enter the STO's and press execute
    Select the STO's and click on background tab. Then it creates the log
    Select the item again and press shift +F4
    It will gives the log inforamation for the STO's and select the item and press on documents tab.
    It will creates only one Delivery for all the STO's.
    Now go to VL02N tcode and enter the delivery number then goto picking tab then enter picking qnty = delivery qnty
    then press on " post goods issue "
    Now go to MIGO to do the goods reciept then enter all the STO's here and check the item then save .
    Only one document will be posted for all the STO's
    Regards,
    Usha.

  • Not getting single delivery for two sales orders

    Hi Sapians,
    I am getting one delivery for two sales orders in VL10A.  But in another case, out of two sales orders, for one order I went to partner functions and changed the address line of ship to party while creating sales order.(Since for that particular order the ship to address is different). then as usual I proceeded to VL10A. But this time system gives two seperate delivery document numbers instead of one which is given earlier. Can any of the experts help me in this regard.
    Thanks for your response in advance.
    Raksha Agarval

    Hi Raja,
    Just now I came out with exact problem. While creating sales order, in the header data partner function tab, if we select the ship to party line item and go for details tab and change the address first line item (that is street number), the same change is also if we do in second sales order also, then if we go for delivery in VL10A, then system gives two delivery documents instead of one.( though, all the requirements are met, like same plant, shipping point, shipping conditions, incoterms.. etc).
    Even after meeting the requirements, as per SAP standards also why system giving two delivery documents? is the problem.
    Please come with possible reasons
    Thanks in advance,,
    Raksha.

  • How to create one checksum for 264 vis

    Hi,
    How to create "one Checksum" for 264 Vis.These 264 Vis are Interlinked if i change code for any .vi the checksum Should be update.This checksum is shown on the main window.
    Regards
    Ravindranath
    Solved!
    Go to Solution.

    Here's a slightly simplified version (saved in 8.6).  There's no need for the Get/Set File Position.  The file position is already being incremented with the read.
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines
    Attachments:
    Multiple File MD5 Checksum (Version 8.6).vi ‏23 KB

Maybe you are looking for

  • Are multiple trunks possible on a 5508 WLC version 7.0.116.0

    To date I have only ever deployed guest WLCs with one bundled channel  to  a neigboring switch. With tunneled guest traffic flow via one vlan on the trunk (management) and leaving on the guest VLAN going physcily back to the same switch. Everything I

  • How do I clear a JList?

    Hello, I would like to know how do I clear a Jlist of all it's content when I click on a button "Clear". I have all the codes working, except, I don't know what is the code line to do this... I have found this: list.setModel(new DefaultListModel());

  • Adobe Premiere Elements 9

    I am a new user. I have a problem.  How to transcode mts files into mp4 files? Do I have to transcode them? Or live them in mts files? I use to work with Adobe Premiere 2.0. It takes me couple seconds to open the programm. But now I am using A. P. E.

  • How to download when the CC app says PS is up to date ?

    After I updated PS yesterday, I could not open it again (error message something like: filename is missing). Finally I deinstalled PS. But now the CC app inhibits even the new download of PS, as the CC app says PS is up to date. I welcome your helpfu

  • IPhoto won't open, it asks me to choose a library but the list appears empty

    Today I when I turned my computer on my desktop display picture had been changed to a default image, and when I tried to open iPhoto a box appeared asking my to choose a library, but there were no options for me to choose from the list was empty. Wha