How to create oracle services using grid control

Hi All,
I have oracle grid control account my grid control version is 10.2.0.4.0.Can any one please let me know the tab from which I can create Oracle services.
I know we can create oracle services using DBCA also.When I'm trying to do that way it is giving below error.
dbca
DISPLAY not set.
Set DISPLAY environment variable, then re-run.
How to set DISPLAY environment variable.
Thanks,
Rafi.

Normally, you set DISPLAY to an IP address with the suffix : and 0.0: the IP address must match a machine able to display X11 windows.
Example with Linux bash shell:
export DISPLAY=192.168.0.1:0.0What is your OS version ? What is your shell (bash, ksh, sh, csh) ? How do you connect to the UNIX host ?
Edited by: P. Forstmann on 8 févr. 2010 09:05

Similar Messages

Create data guard using grid control 10gR3?

Has anyone been able to create a data guard of 10g R2 (10.2.0.3 dbs) using Grid Control 10gR3?
My creation stopped on cloning the standby db step. And i had to finish it manually but i'm just wondering if it has worked for anyone else?

One step further. I enabled debug tracing for the agent and noticed that the creation of the windows service causes an error.
-: Thu Sep 27 10:14:53 2007: DEBUG: clone_util.runOradim(): Running oradim to install service for dg2
-: Thu Sep 27 10:14:53 2007: DEBUG: clone_util.runOradim(): Command: D:\oracle\product\10.2.0\db_1\bin\oradim.exe -NEW -SID dg2
-: Thu Sep 27 10:14:53 2007: DEBUG: db_common.tempLocFallback(): Test filename: D:\oracle\product\10.2.0\agent10g/sysman/emd/upload/\test_temp_location.2976
-: Thu Sep 27 10:14:53 2007: DEBUG: db_common.removeFile(): To remove file D:\oracle\product\10.2.0\agent10g/sysman/emd/upload/\test_temp_location.2976
-: Thu Sep 27 10:14:53 2007: DEBUG: db_common.tempLocFallback(): Tested TEMP location: D:\oracle\product\10.2.0\agent10g/sysman/emd/upload/
-: Thu Sep 27 10:14:53 2007: DEBUG: clone_util.runOradim(): Output file: D:\oracle\product\10.2.0\agent10g/sysman/emd/upload/\dbclone.2976
-: Thu Sep 27 10:14:53 2007: ERROR: clone_util.runOradim(): D:\oracle\product\10.2.0\db_1\bin\oradim.exe -NEW -SID dg2:
The trace refers to file D:\oracle\product\10.2.0\agent10g/sysman/emd/upload/\dbclone.2976 :
DIM-00019: create service error
O/S-Error: (OS 1057) The account name is invalid or does not exist, or the password is invalid for the account name specified.
Although the other steps complete succesfully (using the same credentials), it fails creating the service. Don't know why, yet...

How to monitor Oracle Glassfish with Grid Control 11g

Hi,
Could someone tell me how can i monitor Oracle Glassfish with Grid Control 11g ?? i think i need a plug-in but i don't know where could i download it
I guess the information i can monitor depends on the plug-in :)
Regards
Carlos

Hi Carlos,
We do have partners that routinely write plug-ins to extend OEM. If you take a look at the EM Extensibility Exchange below, you will find various extensions that partners such as Blue Medora have written:
http://apex.oracle.com/pls/apex/f?p=34841:1:26399399216901:::::
Please keep in mind though that between SLM and JVM diagnostics, you would have a significant amount of visibility even without the Glassfish target.
Cheers,
Glen

How to stop oracle services using Net8

Hi
each time I try to install oracle report 6i in myy machine (of course in the same developer home on which form installed ).
a message with title Stop oracle application
saying the following
you must stop all oracle services and application using Net8 for the Net8
installation to be successfull
press ok to continue the installation once the services and applications
have been stopped or press ok to abort this installation.
can any one help me?
oracle database 10g
windows xp
developer 6i

You can stop any service either
a) using the services applet in the control panel window
b) start a cmd box and issue
net stop <servicename>
Hth
Sybrand Bakker
Senior Oracle DBA

How to create Web Services Using EP7

Hi
I got a chance to work on Web Service using EP7 and i am new to web services
This is the first time i am working on Web Services
so please can you guide me where to start and how to start.
if possible reffer some links regarding web services.
regards
mmukesh

Hi Mukesh,
Please refer to the document
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/60046fb9-ac5b-2910-08a6-b7b04b463c62
Thanks
Sarang

How to Create web service using JMS with PUB/SUB pattern.

Hi All,
I need to expose web service using JMS with PUB/SUB pattern.
if you have any source for this.
I tried to use @WLJmsTransport annotation but unable to get it done.
I have configured all JMS server, topic, and connection factory.
Thanks.

Hi, I am having web sample web service program which is simple one.
But I need to Modify this to JMS enable.
Can any one help me?
Thanks.

Create Oracle Service Bus using BEA workshop

Can someone please help with BEA Workshop developer guide/tutorial detailing how to create Oracle Service Bus using workshop IDE.
IDE - BEA Workshop 10gR3
OSB version - Oracle Service Bus 10gR3
Thank you

Thanks for your response Eric.
The tutorials that I've seen so far deal with OSB console, none of them talk about creating OSB using BEA-workshop.
On workshop IDE there is some help on OSB workshop plug-ins, but those are mostly one liners about the plug-in features
Please advice if you've link to OSB-Workshop tutorial.
Thanks

Physical database creation using Grid Control fail

I have tried several times to create a physical standby using Grid Control. Everytime, the job failed at the step "DBClone -> Destination Preparation". The log file indicated the following error message:
PLS-00553: character set name is not recognized.
When I check the spfile, I find that an extra word "PuTTY" was inserted into the spfile as shown in the following spfile, therefore, the instance cannot be started. In addition, everytime when issuing the command "cat spfilermslag.ora", the word "PuTTY" will automatically appear in the command line after the "cat spfilermslag.ora" command.
$ cat spfilermslag.ora
gé ú&PuTTYrmslag.__db_cache_size=150994944
rmslag.__large_pool_size=4194304
rmslag.__shared_pool_size=71303168
*.undo_tablespace='UNDOTBS1'
*.user_dump_dest='/u01/app/oracle/admin/rmslag/udump'
[oracle@wppnode2 dbs]$ PuTTY
What is going on here? How can I fix the problem?
Thanks!

You might just have to do it the old fashioned way. At least it will be a good learning experience.

Data Guard Summary problem using Grid Control.

I setup data guard using Grid Control and after completion, the console of the standby database shows: "Unable to determine Data Guard information." under the Data Guard Summary section. The primary database is not showing the standby. I'm using Red Hat Linux Server 5.7 (64bit) and Oracle 10.2.0.5. This is a standalone (no RAC or ASM involved). When I run show configuration, the following comes up:
DGMGRL> SHOW CONFIGURATION;
Configuration
Name: PRODDB_ghph@ora01
Enabled: YES
Protection Mode: MaxPerformance
Fast-Start Failover: DISABLED
Databases:
ghph - Primary database
gsbh - Physical standby database (disabled)
Current status for "PRODDB_ghph@ora01":
SUCCESS
I tried searching online and metalink but nothing. Any help in solving this problem would be appreciated. TIA
Edited by: Gensis2001 on Jan 8, 2013 3:08 PM

Gensis2001 wrote:
Does this make any sense?
SYS@gsbh> SELECT * FROM V$ARCHIVE_GAP;
no rows selected
SYS@gsbh> select process, status, sequence# from v$managed_standby;
PROCESS STATUS SEQUENCE#
ARCH CLOSING 60353
ARCH CLOSING 60352
RFS IDLE 60354
MR(fg) WAIT_FOR_GAP 58673
4 rows selected.Currently standby is waiting for the sequence *58673* but the later on archives of series 60353... are already archived.
Can you confirm that only archive sequence * 58673* is missing or any more? If you have less number of archives are missing then see how the parameters you configured. like FAL_SERVER, LOG_ARCHIVE_CONFIG, LOG_ARCHIVE_DEST_n so on.
Check below command and see any errors with remote destinations
select severity,error_code,to_char(timestamp,'DD-MON-YYYY HH24:MI:SS') "timestamp" , message from v$dataguard_status where dest_id=2;Source: http://www.oracle-ckpt.com/dataguard_troubleshoot_snapper/
If the archives are missing so many and you do not have backup, then certainly you have to choose incremental roll forward to synchronize the primary database, then only you can see the configuration status of Broker as valid. You can refer this article to perform incremental roll forward http://www.oracle-ckpt.com/rman-incremental-backups-to-roll-forward-a-physical-standby-database-2/

Performance reports using Grid Control

Hello!
Can we create and schedule database performance reports using oracle 10g grid control?
Thanks.

Hi
Yeah its possible to generate the performance reports using Grid Control.
Ex:
Oracle Enterprise Manager GRID Server contains built in reports to support Database Administrators to generate sightly reports.
First Thing is to click to "Reports" tab on the top, right hand side of the GRID Management Console (figure_grid_management_console). This page is where all the predefined and custom reports can be find. Now click on the "Create" Button on top of the page to create a new custom report. "Create Report Definition" page comes to the screen. There are four tabs for the definition of the report.

Switchover in a data guard environment using Grid Control 10.2.0.3

I've tested switchover in a data guard environment using Data Guard Broker in Grid Control.
However, at times, i receive the message "RemoteOperationException: failed to establish input streaming thread". It looks like it has problems connecting to the remote node using the host credentials supplied. I know the credentials are ok because this worked before. If i test preferred credentials, it's ok too..
The workaround has been to restart the database and this seems to work.
Has anyone experienced this?

Thanks for All for replying.
*1. How can I upgrade my Grid control 10.2.0.3 to 10.2.0.4?*
I have upgraded the Grid Control Agent and OMS from 10.2.0.3 to 10.2.0.4
When we upgrade the OMS which also upgrade the Repository database.
Apply the patchset p3731593_10204_Linux-x86-64.zip (Which comes with Grid_Control_10.2.0.4.0_Linux-x86-64.zip)
su - oracle
cd 3731593/Disk1
./runInstaller (Run two times for Agent and oms upgrade)
Agent upgrade_
During upgrade
Specify Home Details: Select the Agent Home to upgrade Grid Control Agent.
Ex: /u01/app/oracle/OracleHomes/agent10g
OMS upgrade+
Specify Home Details: Select the oms home to upgrade oms
Ex: /u01/app/oracle/OracleHomes/oms10g
*2. How can I monitor/Connect my Existing database 10.2.0.4 from Grid Control 10.2.0.3?*
Install Grid Agent on the existing database server 10.2.0.4
Download Linux_x86_64_Grid_Control_agent_download_10_2_0_4_0.zip from OTN http://www.oracle.com/technology/software/products/oem/htdocs/agentsoft.html
su - oracle
cd /u01/software/GridAgent/linux_x64/agent
./runInstaller
Refer:
[To Install an Additional Management Agent Using OUI|http://download.oracle.com/docs/cd/B16240_01/doc/install.102/e10953/installing_em.htm#sthref318]
OracleÂ® Enterprise Manager Grid Control Installation and Basic Configuration
10g Release 4 (10.2.0.4)
Part Number E10953-05
3 Installing Enterprise Manager
Thanks
Mukarram Khan
Edited by: Mukarram Khan on Feb 6, 2009 11:04 PM

Can we schedule Loader Jobs (SQL Loader) using Grid Control ?

Can we schedule SQL Loaders jobs/process using Grid Control for 11g database ?
Or
Is it good to schedule it as external jobs using DBMS_SCHEDULER ?
OS is LINUX. Database is 11g R1 Grid Control will be the latest, I believe 10gR3.
Any other suggestions... (I know it can be done using OS utilities like cron and others but that is not an option for now.)
Thanks in advance.

Try this
-> Create a shell script to execute sqlldr
-> On Grid, create an "OS COMMAND" job and pass this script as parameters. You'll have options to schedule this job.
Let us know how it works.

Unable to connect to Database using Grid Control

Hi,
I am attempting to connect to my Oracle Linux Machine which has 2 databases FROM my 10g Grid control which is on a Windows XP 32 bit.
Although I can login to the actual linux box with the host and database credentials ; I cant use the same to login to the database using Grid control.
I have tried testing the connection using Grid Control >> Preferences >> Preferred Credentials >> Host ; but its just not recognizing the credentials as correct.
When I attempt to startup the database using the host and DB credentials : ERROR MESSAGE : <servername> : <servername> comes up.
My agent on linux box is up. My Listener is running fine.
On my Grid control .. i have the DB, OMS, and Agent running as well.
Any inputs on this issue, I'd appreciate very much.

Thanks for your reply.
Under Hosts on the Main Grid Console Home Page >> "server3.sam" Status shows UP. This server houses my 2 databases. But when I click on Databases >> it shows Instance DOWN.
Status
Failed
Details Failed to connect to database instance: ORA-12541: TNS:no listener (DBD ERROR: OCIServerAttach).
I have verified that my lsnrctl status is good on the linux box. My target agent is up and running on it as well.
So I try to start the STARTUP button >> I enter the HOST Credentials of the Linux box and the Database credentials which I use "SYS" (in upper case - just in case that mattered) and choose SYSDBA ;
Error Message
server3.sam: server3.sam
I created a new dba account and try to login ... dont seem to work ; I tried using SYSTEM account and even altering my sys and system passwords .. all turn out negative.
And the ANSWER to your question ---> Grid Control >> Preferences >> Preferred Credentials >> Database Instance >> corresponding to my database name ; I enter my sysdba username / password AND the host username / password of my Linux box >> TEST >> which also turns out negative.
This entry is auto filled in since I "checked" the box "Save as Preferred Credential"; initially when I tried to start the DB using the STARTUP button.
By the way, my Win XP doesnt really have a password set under User accounts.
Any suggestions please ?

How to create Authorization policy using OIM 11g API

Hi,
Could you please let me know how to create Authorization policy using OIM 11g API.
Thanks

Constructing A Policy Programmatically
http://docs.oracle.com/cd/E27559_01/dev.1112/e27154/cons_policy_prog.htm#CHDHACBF
api ref for PolicyStore
http://docs.oracle.com/cd/E21764_01/apirefs.1111/e22649/oracle/security/jps/service/policystore/PolicyStore.html#createApplicationPolicy_java_lang_String_
something like below code to start with
try {
JpsContextFactory ctxFact;
ctxFact = JpsContextFactory.getContextFactory();
JpsContext ctx;
ctx = ctxFact.getContext();
PolicyStore ps = ctx.getServiceInstance(PolicyStore.class);
if (ps == null) {
// if no policy store instance configured in jps-config.xml
System.out.println("no policy store instance configured");
return;
ApplicationPolicy ap = ps.createApplicationPolicy("Trading", "Trading
Application","Trading Application.");
} catch (JpsException e) {
}

Has anyone used Grid Control to implement DataGuard?

Has anyone used Grid Control to implement DataGuard?

Hi,
You are right, without the B&K software there is not much I can load. However this is usefull information. The VIs that you have are a wraper for the calls to the ActiveX pulse control. If those VIs do not provide the functionality for the Intensity Module there are 2 options:
+The developer did not develop VIs for the module
+The Pulse ActiveX control does not exposes the functionality of the Intensity Module.
To find this out, you can create a new VI that opens a reference to the Pulse ActiveX object and start looking for some property that gives you a reference to the Sound Intensity Module, or a a function that allows you to run any methods from the module. There are a bunch of examples that ship with LabVIEW on calling Ac
tiveX modules.
You can also try to get the documentation for the ActiveX interface for Pulse to find out whether the Module is exported or not.
There is also the option to use Native LabVIEW functions for the Sound Intensuty measurements; the Sound and Vibration Toolset can take sound intensity measurements that are compliant with industry standards.
Let me know how this goes.
Regards,
Juan Carlos

How to create oracle services using grid control

Similar Messages

Maybe you are looking for