How to create output type for GR,GI?

Can any one explain,How to create output type for Goods Receipt,Goods Issue.?
and How to take print out for both?

Hi, jayant in standard u have output type for picking list, delivery doc complete, theres no output type seperately for PGI or PGR
I am sure u need the help of tech guy to create the new output type for ur requirement
regards
giri

Similar Messages

Creating output type for MB01,MB1B & MB1C for IDOC

Dear Exoerts,
Here scenarion is client using interface at front end.Which provides backup data from SAP.
Can anybody guide to Create output type for transactions MB01,MB1B & MB1C.It is going to use for IDOC creation.Client wants Inventory program at front end system.
Waiting for your reply.

Hi,
Please check below link in this regard. Thanking you.
http://help.sap.com/saphelp_45b/helpdata/en/52/16ac64543311d1891c0000e8322f96/frameset.htm
Edited by: Padmasri Garapati on Nov 30, 2011 3:14 PM

Create output type for Quotes

Hi all,
I want to create new output type for quotes that will create an IDOC file at the quote level.
It will Include all of the same segments that are currently being populated for IDOCS created for ZBA4 order confirmation output type. Also it will
Include expiry date from quote header vbak.bnddt (segment E1EDK03, qualifier 006).
Include S0A Reference from quotation header text remarks (segment E1EDKT1)
How to that??
Thanks in advance.
Raj

Dear Kittu,
For your requirement needs output determination settings for the billing.
I don't think you can have Medium PDF ,you can send the PDF file Via Medium Mail.
To do the output determination proceed with this path
IMG>Sales and Distribution->Basic functions>Output control>Output determination>Output Determination Using the Condition Technique-->Maintain Output Determination for Billing Documents.
-->Maintain Condition Tables
-->Maintain Output Types
-->Maintain Access Sequences
-->Assign Output Types To Partner Functios
-->Maintain Output Determination Procedure
-->Assign Output Determination Procedures
You have to assign output program to your output type.You need develop the program such a way that to send the PDF file Via Mail.
After these settings you need to maintain the condition record with Medium Mail in VV31 transaction.
I hope this will help you,
Regards,
Murali.

How to create Output device for Adobe forms

Hi,
SWIN/SAPWIN output device types are not working with Adobe forms. How to create a output type for Adobe forms.
Thanks,
Mathivanan.G

hi Mathivanan,
This might help you.
http://help.sap.com/saphelp_nw70/helpdata/EN/c8/7f065c7363f14c84a97a3687aa7e62/frameset.htm
Regards,
Runal

How to set output type for PO

Hi,
    I am creating a new output for print PO in NACE. Now I am getting the problem of setting the access key combination. Now I Even want to get that new cretead output type in me23n messaages.
regards
Aashish

HI,
I think you need not to create OUTPUT type. But you want to assign print program and SAPscript/Smartform to the existing output type.
You can set the output type, print program and SAPscript/Smartform in the table TNAPR.
YOu can do it either from SM30 or from SE16 as Table maintenance is allowed for this Table.
Sample entries are like below:
MANDT       030
KSCHL       NEU
NACHA       1
KAPPL       EA
PGNAM       SAPFM06P
RONAM       ENTRY_NEU
FONAM       Z_MEDRUCK
PGNAM2
RONAM2
FONAM2
PGNAM3
RONAM3
FONAM3
PGNAM4
RONAM4
FONAM4
PGNAM5
RONAM5
FONAM5
FUNCNAME
SFORM
Message was edited by: Ramakrishna Prasad

Creating output type for issuing print

hello friends
can anybody tell me the process or steps to create output type to issue print

HI.
Goto NACE transaction.
Select the application for whch you want to create the output type. For ex. select v3 for invoice.
Click on 'Output Types' button on application toolbar.
Click on 'New Entries'.
Click on Processing Routines on the left-side to enter the driver program and SAPscript/Smartform name.
Regards.
Jay

Output type for movement type for IDOC creation

Dear Experts,
Can anybody tell how to create "Output type for different movement types for IDOC creation"
Specially for Movement type used for Inbound & outbound.

Hi,
pls find below link's
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/abap/idoc%2bsteps
BAPI & IDOC material
IDOC Scenario Steps
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://sap.niraj.tripod.com/id51.html
http://www.thespot4sap.com/Articles/SAP_ALE_IDOCS.asp
Changing fields in an Idoc segment
Regards
Raj.

Output Type for Outbound Delivery in VL02N

Hi All,
Could you please tell me how to maintain output types for a specific outbound delivery in ECC , so that inbound delivery is created automatically from it? is it maintained in VL02N? I actually searched this on various forums but did not find the correct answer, as everywhere only the customizing is given.
Thanks in advance
Best Regards,
Abhijeet

Hi,
You can maintain the output type SPED as below. Once you do PGI, SPED should be processed. If not , do it manually from VL71.
VL02N -> Extra>Delivery Output -> Header> Output Type = SPED
Regards
Edited by: Shashidhar Shetty on Dec 5, 2011 1:59 PM

Output type for Delivery note missing for shipping point

Hi all,
   I have a plant setup to email delivery note which uses shipping point SGUS. Condition record is setup for this shipping point using Del Typ/Shipping Point /Plant. This uses the communication stragery ZINT.
The email works well for this shipping point. However, when delivery cannot be email using shipping point CHAL. I guess this plant has 2 shipping points (sgus and chal).
When delivery is created, output type for email is missing.   I already created condition rec
for LF/CHAL/plant 121. Still not working.
Can anyone pls provide any suggestions ASAP ?
Thanks
Joyce

Hi MdZ,
   I looked at the analysis output. ZD04 output is what i am after. Don't understand the followings:
Q1 - why the ordering in anaylsis is different than in output determination procedure. For example:
In Analysis Output: i have:
LDOO    - Output not found
MAIL     - manual output
PLOO    - Output not found
Z940    - Output found
ZBOL   - Output not found
ZD04   - OUTPUT NOT FOUND
The Output Determination Procedure as:
Step Counter   CType
10       1           LD00
12       1           ZLFX
13       0           LALE
14       1           ZBOL
20        2          MAIL
75       1           ZD04
90       1           PL00
110      1          Z940
Step 10 should be read , then step 12, and so on. Why is the ordering in procedure different than in
output analysis ?
Q2. Why did it display ZD04 not found when ZD04 appear on the delivery output as green light ? When i drill down, it show 2 access sequence. Access 10 stated Output found. Access 20 stated Output not found.
Thank you.
Joyce

Output type for MB1B & MB1C-IDOC creation

Dear Expert,
I have to make output type for MB1B & MB1C transaction to create IDOC.Can anybody guide path to create Output type for same.

Hi anupmore124,
You can create a new condition type, named as "ZWA1" and you can copied this from WA01.
Once this is copied, change the following data:
1. In partner functions, include:
Medium: 6 - EDI
Funciton: (blank)
You can delete the other partner function(s), if you want that this new output message type can be handled only by EDI (for IDOCs).
2. In the "General data" tab, you need to have selected only:
Access sequence: i.e. 0003 - Trans.Type/Print Vers./Indic.
Check box active "Access to conditions"
The rest of the check box needs to be inactive.
3. In the "Default" tab, define:
Dispatch time: 1 - Send with periodically scheduled job
Transmission medium: 6 - EDI
Then, save the data and now, the IDOC can be created.
Obviously, I presume that you made your customising before in WE20 with the correct IDOC message type, etc.
I hope this help.
Kind regards,
Sandra

Output type for IDOC creation

Hi Sapgurus,
Can anybody help as per below.
Client has third party interface system from which they access stock data from SAP system to front end system.They required stock quantity.As per below transaction I have to create output type for IDOC creation for below t codes.Pls guide for creating output type.
Note: Consider as per MM point of view.Output type is not for printout,It is for IDOC to display stock at front end system.
MB1C u2013 Inward + Outward (As per movement types)
MB1B u2013 Inward + Outward (As per movement types)
VL02N - Inward + Outward (As per Delivery types (Inbound & Outbound))
VL06G - Outward
VL09 - Inward + Outward (As per Delivery types (Inbound & Outbound)
MB0A u2013 Inward
MB01 u2013 Inward
MBST u2013 Reversal of Inward stock

Hi,,
Check the below idoc WMIVID01
"IDoc for Inventory"" in help.sap.com
regards,
Lalita

How to create an IDOC as an output type for an SAP standard transaction

Hi ,
How to create an outbound IDOC as an output type for an SAP standard transaction.
Regards,
Beena

In NACE tcode u can create output type with medium as EDI,
u can assign the entry sub routine as ENTRY_EDI in RNASTED

How to know the printprogram and output type for perticular standard script

how to know the print program and output type for perticular standard script and wt the proceure we will fallow to modifie the standard script..if possible u have any sample code plz share with me.....

Hi Phani,
To know the print program and output type for a standard script we have a table called TNAPR. So just you go to SE11 and provide the table name as TNAPR and choose display option.Then go with display entries option and in selection screen you have to provide the form name for whic you want to know the print program and output type.
To modify a standard script first of all you have to copy the standard form for which you need modifications into Zform. Once you done this you can modify the layout set as per your requirement.Then what ever the modifications you have done in layout set for that you need to populate the data.For this you also need to do some modifications to the print program.so you have to options like directly you can modify the print program as per your requirement and other one is you can create a subroutine and do coding in that subroutine. Then you need call this subroutine in the Script Form.like this you can do modifications to the standard script........................... Reward me if its helpful..........
Thanks & Regards.
Laxman.P
B'lore.

How to create a macro for a planning type in MC8b transaction

Hi,
I am presently working for a product allocation demand, which have a information structiure with characteristic and key field.
the characteristic are production allocation quantity, incoming order quantity, and open order quantity.
i have created a planning type in which the data updation takes from the excel file to the planning type in mc95.
but i need to create a macro for this planning type .
can any body give the details information how to create a Macro for a planning type.
Thanks and regards
GopalKrishna

Dear Gopal
May be the link would be helpful to you.
[Planning Types and Macros|http://help.sap.com/saphelp_46c/helpdata/en/a5/631cc443a211d189410000e829fbbd/frameset.htm]
Drill down the left tab once you opened the link, for more information.
Thanks
G. Lakshmipathi

How to create a record for table PLAF with order type 'NB'.

How to create a record for table PLAF with order type 'NB'(standard purchase order).
who can tell me the T-code or some usefull information?
Thanks.

Hi
This will be updated automatically when generate planned orders thru MRP. (MD02)
regards
Srinivas

How to create output type for GR,GI?

Similar Messages

Maybe you are looking for