How to create PBR functionality using WDS deployment
Dear sir/madam,
We are a Dutch OEM currently working on deployment and DIS. I have a question about deployment I’m hoping you can help us with.
We were tought to deploy images via USB using the following script:
dism /Apply-Image /ImageFile:%1 /Index:1 /ApplyDir:W:\
md T:\Recovery\WindowsRE
attrib -h -a -s W:\windows\system32\recovery\winre.wim
copy W:\windows\system32\recovery\winre.wim T:\Recovery\WindowsRE\winre.wim
W:\Windows\System32\bcdboot W:\Windows /s S:
W:\Windows\System32\reagentc /setreimage /path T:\Recovery\WindowsRE /target W:\Windows
Mkdir R:\RecoveryImage
Copy %2 R:\RecoveryImage\
W:\Windows\System32\reagentc /setosimage /path R:\RecoveryImage /target W:\Windows /index 1
This works perfectly for single systems. However, since we’re planning on building a lot of units we want to automate installation over network. We’re building a solution to deploy custom images on tablets, laptops and desktops based on
WDS. We currently have a working MS Server 2012 WDS server and several working custom images. The question we have is regarding the system recovery functions (PBR). I’ve managed to automate login to WDS, language choice and disk partitioning using WDSunattend
(see below). WinRE and Recovery Image partitions are created. We can manually select the image we want to deploy and it will successfully install to the Windows partition.
<?xml version="1.0" ?>
<unattend xmlns="urn:schemas-microsoft-com:unattend">
<settings pass="windowsPE">
<component name="Microsoft-Windows-Setup" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" processorArchitecture="x86">
<WindowsDeploymentServices>
<Login>
<WillShowUI>OnError</WillShowUI>
<Credentials>
<Username>Administrator</Username>
<Domain>WDS.assemblage.com</Domain>
<Password>xxx</Password>
</Credentials>
</Login>
<ImageSelection>
<WillShowUI>OnError</WillShowUI>
<InstallTo>
<DiskID>0</DiskID>
<PartitionID>4</PartitionID>
</InstallTo>
</ImageSelection>
</WindowsDeploymentServices>
<DiskConfiguration>
<Disk>
<DiskID>0</DiskID>
<WillWipeDisk>false</WillWipeDisk>
<CreatePartitions>
<CreatePartition>
<Order>1</Order>
<Size>540</Size>
<Type>Primary</Type>
</CreatePartition>
<CreatePartition>
<Order>2</Order>
<Size>260</Size>
<Type>EFI</Type>
</CreatePartition>
<CreatePartition>
<Order>3</Order>
<Size>128</Size>
<Type>MSR</Type>
</CreatePartition>
<CreatePartition>
<Order>4</Order>
<Size>20000</Size>
<Type>Primary</Type>
</CreatePartition>
<CreatePartition>
<Order>5</Order>
<Extend>true</Extend>
<Type>Primary</Type>
</CreatePartition>
</CreatePartitions>
<ModifyPartitions>
<ModifyPartition>
<Order>1</Order>
<Format>NTFS</Format>
<Label>WinRE</Label>
<PartitionID>1</PartitionID>
<TypeID>de94bba4-06d1-4d40-a16a-bfd50179d6ac</TypeID>
</ModifyPartition>
<ModifyPartition>
<Order>2</Order>
<PartitionID>2</PartitionID>
<Label>System</Label>
<Format>FAT32</Format>
</ModifyPartition>
<ModifyPartition>
<Order>3</Order>
<PartitionID>3</PartitionID>
</ModifyPartition>
<ModifyPartition>
<Order>4</Order>
<PartitionID>4</PartitionID>
<Letter>C</Letter>
<Label>Windows</Label>
<Format>NTFS</Format>
</ModifyPartition>
<ModifyPartition>
<Order>5</Order>
<PartitionID>5</PartitionID>
<Label>Recovery</Label>
<Format>NTFS</Format>
<TypeID>de94bba4-06d1-4d40-a16a-bfd50179d6ac</TypeID>
</ModifyPartition>
</ModifyPartitions>
</Disk>
</DiskConfiguration>
</component>
<component name="Microsoft-Windows-International-Core-WinPE" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" processorArchitecture="x86">
<SetupUILanguage>
<WillShowUI>OnError</WillShowUI>
<UILanguage>en-GB</UILanguage>
</SetupUILanguage>
<UILanguage>en-GB</UILanguage>
</component>
</settings>
</unattend>
Here’s the problem: I can’t find any information on creating PBR functionality using unattend anywhere. Is this possible? If it is, can you help us find a solution?
Since I can’t find any info on creating PBR using unattend I’m assuming that we have to add PBR functionality using scripts after Windows setup is completed. How do we get this done using WDS?
With kind regards,
Frank Wessels.
Hi,
We could use deploymenr scripts to configure the recovery partitions:
Samples: Applying Windows, System, and Recovery Partitions by using a Deployment Script
More information regarding Capture and Apply Windows, System, and Recovery Partitions, please check:
http://technet.microsoft.com/en-us/library/hh825041.aspx
Hope this may help
Best regards
Michael Shao
TechNet Community Support
Similar Messages
-
How to create poll functionality using java(struts)
Hiii,
How to create the poll functionality to place into the site. I am using struts and XML file to store the data. We should able to view the result of the poll in horizontal bar graph.
Please give me an idea how to implement it or provide a link which has the implementation.
ThanksWhatever happened to good, old-fashioned thinking? All we see here now is "how to write <common application> with minimal input from myself?"-type questions. It's only a matter of time until we get people coming here asking "how to write <massively-scoped enterprise app>? What class I need for that?". Oh, wait. We already do get that
-
How to create search function (af:query) using method in java
hi All..:)
i got problem with search custom (af:query), how to create search function/ af:query using method in java class?
anyone help me....
thx
agungdmtHi,
download the ADF Faces component demo sources from here: http://www.oracle.com/technetwork/testcontent/adf-faces-rc-demo-083799.html It also has an example for creating a custom af:query model
Frank -
How to create purchase order using VA01 for BAPI?
how to create purchase order using VA01 for BAPI?
Hi Arun,
Please check this link
Example Program for BAPI_PO_CREATE1
Re: BAPI_PO_CREATE1
Questions in BAPI_PO_CREATE1
Problem with BAPI_PO_CREATE1
*& Report BAPI_PO_CREATE *
REPORT bapi_po_create.
Input File Declaration
TYPES: BEGIN OF ty_input_file,
column1 TYPE char50,
column2 TYPE char50,
column3 TYPE char50,
column4 TYPE char50,
column5 TYPE char50,
column6 TYPE char50,
column7 TYPE char50,
column8 TYPE char50,
column9 TYPE char50,
column10 TYPE char50,
column11 TYPE char50,
column12 TYPE char50,
column13 TYPE char50,
column14 TYPE char50,
column15 TYPE char50,
column16 TYPE char50,
column17 TYPE char50,
column18 TYPE char50,
END OF ty_input_file.
DATA: i_input_file TYPE STANDARD TABLE OF ty_input_file,
wa_input_file TYPE ty_input_file.
CONSTANTS: c_path TYPE char20 VALUE 'C:\',
c_mask TYPE char9 VALUE ',.,..',
c_mode TYPE char1 VALUE 'O',
c_filetype TYPE char10 VALUE 'ASC',
c_x TYPE char01 VALUE 'X'.
PARAMETERS : p_fname LIKE rlgrap-filename.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_fname.
Browse Presentation Server
PERFORM f4_presentation_file.
START-OF-SELECTION..
Read presentation server file
PERFORM f1003_upload_file.
IF NOT i_input_file[] IS INITIAL.
PERFORM split_data.
ENDIF.
*& Form f4_presentation_file
*& F4 Help for presentation server
FORM f4_presentation_file .
CALL FUNCTION 'WS_FILENAME_GET'
EXPORTING
def_path = c_path
mask = c_mask
mode = c_mode
title = text-001
IMPORTING
filename = p_fname
EXCEPTIONS
inv_winsys = 1
no_batch = 2
selection_cancel = 3
selection_error = 4
OTHERS = 5.
IF sy-subrc 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " f4_presentation_file
*& Form f1003_upload_file
*& Upload File
FORM f1003_upload_file .
DATA: lcl_filename TYPE string.
lcl_filename = p_fname.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = lcl_filename
filetype = c_filetype
has_field_separator = c_x
TABLES
data_tab = i_input_file
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
OTHERS = 17.
IF sy-subrc 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
EXIT.
ENDIF.
ENDFORM. " f1003_upload_file
*& Form split_data
Collect data for creating Purchase Order
FORM split_data .
DATA: i_poitem TYPE STANDARD TABLE OF bapimepoitem,
i_poitemx TYPE STANDARD TABLE OF bapimepoitemx,
i_poitem_sch TYPE STANDARD TABLE OF bapimeposchedule,
i_poitem_schx TYPE STANDARD TABLE OF bapimeposchedulx,
i_acct_*** TYPE STANDARD TABLE OF bapimepoaccount,
i_acct_assx TYPE STANDARD TABLE OF bapimepoaccountx,
i_services TYPE STANDARD TABLE OF bapiesllc ,
i_srvacc TYPE STANDARD TABLE OF bapiesklc,
i_return TYPE STANDARD TABLE OF bapiret2,
wa_header TYPE bapimepoheader,
wa_headerx TYPE bapimepoheaderx,
wa_poitem TYPE bapimepoitem,
wa_poitemx TYPE bapimepoitemx,
wa_poitem_sch TYPE bapimeposchedule,
wa_poitem_schx TYPE bapimeposchedulx,
wa_acct_*** TYPE bapimepoaccount,
wa_acct_assx TYPE bapimepoaccountx,
wa_services TYPE bapiesllc,
wa_srvacc TYPE bapiesklc,
wa_return TYPE bapiret2,
ws_po TYPE bapimepoheader-po_number.
break gbpra8.
wa_services-pckg_no = 10.
wa_services-line_no = 1.
wa_services-outl_no = '0'.
wa_services-outl_ind = c_x.
wa_services-subpckg_no = 20.
APPEND wa_services TO i_services.
wa_srvacc-pckg_no = 10.
wa_srvacc-line_no = 1.
wa_srvacc-serno_line = 01.
wa_srvacc-serial_no = 01.
wa_srvacc-percentage = 100.
APPEND wa_srvacc TO i_srvacc.
LOOP AT i_input_file INTO wa_input_file.
IF wa_input_file-column2 EQ 'HD'.
wa_header-doc_type = wa_input_file-column3.
wa_header-creat_date = sy-datum.
wa_header-created_by = sy-uname.
wa_header-vendor = wa_input_file-column4.
PERFORM conversion_output USING wa_header-vendor
CHANGING wa_header-vendor.
wa_header-comp_code = 'DE03'.
wa_header-purch_org = 'DE03'.
wa_header-pur_group = 'DE1'.
wa_header-vper_start = wa_input_file-column9.
wa_header-vper_end = wa_input_file-column10.
wa_headerx-comp_code = c_x.
wa_headerx-doc_type = c_x.
wa_headerx-creat_date = c_x.
wa_headerx-created_by = c_x.
wa_headerx-vendor = c_x.
wa_headerx-purch_org = c_x.
wa_headerx-pur_group = c_x.
wa_headerx-vper_start = c_x.
wa_headerx-vper_end = c_x.
ENDIF.
IF wa_input_file-column2 EQ 'IT'.
wa_poitem-po_item = wa_input_file-column3.
wa_poitem-short_text = wa_input_file-column6.
wa_poitem-plant = wa_input_file-column8.
wa_poitem-quantity = '1'.
wa_poitem-tax_code = 'V0'.
wa_poitem-item_cat = 'D'.
wa_poitem-acctasscat = 'K'.
wa_poitem-matl_group = wa_input_file-column7.
wa_poitem-pckg_no = '10'.
APPEND wa_poitem TO i_poitem .
wa_poitemx-po_item = wa_input_file-column3.
wa_poitemx-po_itemx = c_x.
wa_poitemx-short_text = c_x.
wa_poitemx-plant = c_x.
wa_poitemx-quantity = c_x.
wa_poitemx-tax_code = c_x.
wa_poitemx-item_cat = c_x.
wa_poitemx-acctasscat = c_x.
wa_poitemx-matl_group = c_x.
wa_poitemx-pckg_no = c_x.
APPEND wa_poitemx TO i_poitemx.
wa_poitem_sch-po_item = wa_input_file-column3.
wa_poitem_sch-delivery_date = sy-datum.
APPEND wa_poitem_sch TO i_poitem_sch.
wa_poitem_schx-po_item = wa_input_file-column3.
wa_poitem_schx-po_itemx = c_x.
wa_poitem_schx-delivery_date = c_x.
APPEND wa_poitem_schx TO i_poitem_schx.
wa_acct_***-po_item = 10.
wa_acct_***-serial_no = 01.
wa_acct_***-gl_account = '0006360100'.
wa_acct_***-co_area = '1000'.
wa_acct_***-costcenter = 'KC010000'.
APPEND wa_acct_*** TO i_acct_***.
wa_acct_***-po_item = 10.
wa_acct_***-serial_no = 02.
wa_acct_***-gl_account = '0006360100'.
wa_acct_***-co_area = '1000'.
wa_acct_***-costcenter = 'KC010000'.
APPEND wa_acct_*** TO i_acct_***.
wa_acct_assx-po_item = 10.
wa_acct_assx-serial_no = 01.
wa_acct_assx-po_itemx = c_x.
wa_acct_assx-serial_nox = c_x.
wa_acct_assx-gl_account = c_x.
wa_acct_assx-co_area = c_x.
wa_acct_assx-costcenter = c_x.
APPEND wa_acct_assx TO i_acct_assx.
wa_acct_assx-po_item = 10.
wa_acct_assx-serial_no = 02.
wa_acct_assx-po_itemx = c_x.
wa_acct_assx-serial_nox = c_x.
wa_acct_assx-gl_account = c_x.
wa_acct_assx-co_area = c_x.
wa_acct_assx-costcenter = c_x.
APPEND wa_acct_assx TO i_acct_assx.
wa_services-pckg_no = 20.
wa_services-line_no = 2.
wa_services-service = wa_input_file-column9.
wa_services-quantity = '100'.
wa_services-gr_price = '100'.
wa_services-userf1_txt = wa_input_file-column13.
APPEND wa_services TO i_services.
wa_srvacc-pckg_no = 20.
wa_srvacc-line_no = 1.
wa_srvacc-serno_line = 02.
wa_srvacc-serial_no = 02.
wa_srvacc-percentage = 100.
APPEND wa_srvacc TO i_srvacc.
ENDIF.
ENDLOOP.
CALL FUNCTION 'BAPI_PO_CREATE1'
EXPORTING
poheader = wa_header
poheaderx = wa_headerx
POADDRVENDOR =
TESTRUN =
MEMORY_UNCOMPLETE =
MEMORY_COMPLETE =
POEXPIMPHEADER =
POEXPIMPHEADERX =
VERSIONS =
NO_MESSAGING =
NO_MESSAGE_REQ =
NO_AUTHORITY =
NO_PRICE_FROM_PO =
IMPORTING
exppurchaseorder = ws_po
EXPHEADER =
EXPPOEXPIMPHEADER =
TABLES
return = i_return
poitem = i_poitem
poitemx = i_poitemx
POADDRDELIVERY =
poschedule = i_poitem_sch
poschedulex = i_poitem_schx
poaccount = i_acct_***
POACCOUNTPROFITSEGMENT =
poaccountx = i_acct_assx
POCONDHEADER =
POCONDHEADERX =
POCOND =
POCONDX =
POLIMITS =
POCONTRACTLIMITS =
poservices = i_services
posrvaccessvalues = i_srvacc
POSERVICESTEXT =
EXTENSIONIN =
EXTENSIONOUT =
POEXPIMPITEM =
POEXPIMPITEMX =
POTEXTHEADER =
POTEXTITEM =
ALLVERSIONS =
POPARTNER =
break gbpra8.
LOOP AT i_return INTO wa_return.
ENDLOOP.
ENDFORM. " split_data
*& Form conversion_output
Conversion exit input
FORM conversion_output USING p_ip
CHANGING p_op.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = p_ip
IMPORTING
output = p_op.
ENDFORM. " conversion_output
Best regards,
raam -
How to create Handling Unit using Process Order no. & Packing Instruction
Hi experts,
Please guide me how to create Handling Unit using Process Order number & Packing Instruction reference?Noramlly this is done using standard transaction 'COWBPACK'.
ANY FUNCTION MODULE OR BAPI TO DO THIS.
if any solution please explain with proper example..
Thanks In advance
Thanks,
YogeshHi experts,
Please guide me how to create Handling Unit using Process Order number & Packing Instruction reference?Noramlly this is done using standard transaction 'COWBPACK'.
ANY FUNCTION MODULE OR BAPI TO DO THIS.
if any solution please explain with proper example..
Thanks In advance
Thanks,
Yogesh -
How to create SERVICE PR using BAPI_PR_CREATE
Hi everyone,
How to create SERVICE PR using BAPI_PR_CREATE
Regards,
My Code(it doesn't work,I don't know what's wrong.):
*& Report ZWTEST
REPORT zwtest.
DATA: header TYPE bapimereqheader,
headerx TYPE bapimereqheaderx,
item LIKE TABLE OF bapimereqitemimp WITH HEADER LINE,
itemx LIKE TABLE OF bapimereqitemx WITH HEADER LINE,
account LIKE TABLE OF bapimereqaccount WITH HEADER LINE,
accountx LIKE TABLE OF bapimereqaccountx WITH HEADER LINE,
service LIKE TABLE OF bapi_srv_service_line WITH HEADER LINE,
servicex LIKE TABLE OF bapi_srv_service_linex WITH HEADER LINE,
serviceaccount LIKE TABLE OF bapi_srv_acc_data WITH HEADER LINE,
serviceaccountx LIKE TABLE OF bapi_srv_acc_datax WITH HEADER LINE,
preq_no LIKE bapimereqheader-preq_no,
lt_return LIKE TABLE OF bapiret2 WITH HEADER LINE,
wa_return LIKE bapiret2.
header-pr_type = 'NB'."订单类型(采购)
headerx-pr_type = 'X'.
CLEAR: item.
item-preq_item = '00010'.
item-pur_group = '426'."采购组
item-short_text = '服务类PR'."短文本
item-plant = '1051'."工厂
item-matl_group = 'AS07'."物料组
item-item_cat = '9'."项目类别
item-acctasscat = 'K'."科目分配类别
item-pckg_no = '0000000001'."软件包编号
APPEND item.
CLEAR: itemx.
itemx-preq_item = '00010'.
itemx-preq_itemx = 'X'.
itemx-pur_group = 'X'."采购组
itemx-short_text = 'X'."短文本
itemx-plant = 'X'."工厂
itemx-matl_group = 'X'."物料组
itemx-item_cat = 'X'."项目类别
itemx-acctasscat = 'X'."科目分配类别
itemx-pckg_no = 'X'."软件包编号
APPEND itemx.
CLEAR: account.
account-preq_item = '00010'.
account-serial_no = '01'.
*account-quantity = '0.955'.
*account-distr_perc = '95.5'.
account-gl_account = '4205020000'.
account-costcenter = '1042000001'.
*account-co_area = 'CNOC'.
*account-profit_ctr = '9999999999'.
APPEND account.
CLEAR: accountx.
accountx-preq_item = '00010'.
accountx-serial_no = '01'.
accountx-preq_itemx = 'X'.
accountx-serial_nox = 'X'.
*accountx-quantity = 'X'.
*accountx-distr_perc = 'X'.
accountx-gl_account = 'X'.
accountx-costcenter = 'X'.
*accountx-co_area = 'X'.
*accountx-profit_ctr = 'X'.
APPEND accountx.
CLEAR: service.
service-doc_item = '00010'.
service-outline = '0000000001'.
service-srv_line = '0000000010'.
service-short_text = 'service test'.
service-quantity = '10.000'.
service-uom = 'AU'.
service-gross_price = '10.00'.
service-currency = 'CNY'.
*service-matl_group = 'AS07'."物料组
APPEND service.
CLEAR: servicex.
servicex-doc_item = '00010'.
servicex-outline = '0000000001'.
servicex-srv_line = '0000000010'.
servicex-short_text = 'X'.
servicex-quantity = 'X'.
servicex-uom = 'X'.
servicex-gross_price = 'X'.
servicex-currency = 'X'.
*servicex-matl_group = 'X'.
APPEND servicex.
CLEAR: serviceaccount.
serviceaccount-doc_item = '00010'.
serviceaccount-outline = '0000000001'.
serviceaccount-srv_line = '0000000010'.
serviceaccount-serial_no = '01'.
serviceaccount-serial_no_item = '01'.
serviceaccount-percent = '100'.
APPEND serviceaccount.
CLEAR: serviceaccountx.
serviceaccountx-doc_item = '00010'.
serviceaccountx-outline = '0000000001'.
serviceaccountx-srv_line = '0000000010'.
serviceaccountx-serial_no = '01'.
serviceaccountx-serial_no_item = 'X'.
serviceaccountx-percent = 'X'.
APPEND serviceaccountx.
CALL FUNCTION 'BAPI_PR_CREATE'
EXPORTING
prheader = header
prheaderx = headerx
* TESTRUN =
IMPORTING
number = preq_no
* PRHEADEREXP =
TABLES
return = lt_return
pritem = item
pritemx = itemx
* PRITEMEXP =
* PRITEMSOURCE =
praccount = account
* PRACCOUNTPROITSEGMENT =
praccountx = accountx
* PRADDRDELIVERY =
* PRITEMTEXT =
* PRHEADERTEXT =
* EXTENSIONIN =
* EXTENSIONOUT =
* PRVERSION =
* PRVERSIONX =
* ALLVERSIONS =
* PRCOMPONENTS =
* PRCOMPONENTSX =
* SERVICEOUTLINE =
* SERVICEOUTLINEX =
servicelines = service
servicelinesx = servicex
* SERVICELIMIT =
* SERVICELIMITX =
* SERVICECONTRACTLIMITS =
* SERVICECONTRACTLIMITSX =
serviceaccount = serviceaccount
serviceaccountx = serviceaccountx
* SERVICELONGTEXTS =
* SERIALNUMBER =
* SERIALNUMBERX =
* 处理错误消息:通过判断消息的类型,来判断BAPI是否成功
READ TABLE lt_return INTO wa_return WITH KEY type = 'E'.
IF sy-subrc = 0.
CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'.
ELSE.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
wait = 'X'.
WRITE: / '成功创建采购申请', preq_no.
ENDIF.
LOOP AT lt_return INTO wa_return.
WRITE: / wa_return-message, wa_return-type, wa_return-id, wa_return-number.
ENDLOOP.see note:
1950319 - How to create service PR with BAPI_PR_CREATE.pdf -
How to create field catalog using field-symbols in normal alv report?
hi all,
how to create field catalog using field-symbols in normal alv report? i.e, using function modules...reuse_alv_list_display/grid_display?
regards,
jackHI
LIKE THIS
TYPE-POOLS : slis.
DATA : t_fieldcat TYPE slis_t_fieldcat_alv,
st_fieldcat TYPE slis_fieldcat_alv.
st_fieldcat-fieldname = 'STATUS'.
st_fieldcat-seltext_l = 'STATUS INDICATOR'.
st_fieldcat-outputlen = 17.
APPEND st_fieldcat TO t_fieldcat.
CLEAR st_fieldcat.
st_fieldcat-fieldname = 'VBELN'.
st_fieldcat-do_sum = ' '.
st_fieldcat-seltext_l = 'Sales Document No.'.
st_fieldcat-outputlen = 10.
APPEND st_fieldcat TO t_fieldcat.
CLEAR st_fieldcat.
st_fieldcat-fieldname = 'AUDAT'.
st_fieldcat-do_sum = ' '.
st_fieldcat-seltext_l = 'Document Date'.
st_fieldcat-outputlen = 10.
APPEND st_fieldcat TO t_fieldcat.
CLEAR st_fieldcat.
st_fieldcat-fieldname = 'VBTYP'.
st_fieldcat-do_sum = ' '.
st_fieldcat-seltext_l = 'Document Type'.
st_fieldcat-outputlen = 4.
APPEND st_fieldcat TO t_fieldcat.
CLEAR st_fieldcat.
st_fieldcat-fieldname = 'AUART'.
st_fieldcat-do_sum = ' '.
st_fieldcat-seltext_l = 'Category'.
st_fieldcat-outputlen = 1.
APPEND st_fieldcat TO t_fieldcat.
CLEAR st_fieldcat.
st_fieldcat-fieldname = 'AUGRU'.
st_fieldcat-do_sum = ' '.
st_fieldcat-seltext_l = 'Reason'.
st_fieldcat-outputlen = 3.
APPEND st_fieldcat TO t_fieldcat.
CLEAR st_fieldcat.
st_fieldcat-fieldname = 'NETWR'.
st_fieldcat-do_sum = 'X'.
st_fieldcat-seltext_l = 'Net Amount'.
st_fieldcat-outputlen = 15.
APPEND st_fieldcat TO t_fieldcat.
CLEAR st_fieldcat.
st_fieldcat-fieldname = 'WAERK'.
st_fieldcat-do_sum = ' '.
st_fieldcat-seltext_l = 'Unit'.
st_fieldcat-outputlen = 5.
APPEND st_fieldcat TO t_fieldcat.
CLEAR st_fieldcat.
*sortinfo
st_sort-fieldname = 'AUART'.
st_sort-up = 'X'.
st_sort-subtot = 'X'.
APPEND st_sort TO t_sort.
CLEAR st_sort.
st_sort-fieldname = 'VBTYP'.
st_sort-up = 'X'.
st_sort-subtot = ' '.
APPEND st_sort TO t_sort.
CLEAR st_sort.
st_sort-fieldname = 'WAERK'.
st_sort-up = 'X'.
st_sort-subtot = 'X'.
APPEND st_sort TO t_sort.
CLEAR st_sort.
st_sort-fieldname = 'VBELN'.
st_sort-up = ' '.
st_sort-subtot = 'X'.
APPEND st_sort TO t_sort.
CLEAR st_sort.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
i_list_type = 0
IMPORTING
et_events = it_eventcat
EXCEPTIONS
list_type_wrong = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
IF grid = 'X'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER = ' '
I_BUFFER_ACTIVE = ' '
i_callback_program = g_program
I_CALLBACK_PF_STATUS_SET = 'SET_PF_STATUS'
I_CALLBACK_USER_COMMAND = ' '
I_CALLBACK_TOP_OF_PAGE = 'TOP_OF_PAGE'
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
I_GRID_TITLE =
I_GRID_SETTINGS =
IS_LAYOUT =
it_fieldcat = t_fieldcat
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
it_sort = t_sort
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
IT_EVENTS =
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
I_HTML_HEIGHT_TOP = 0
I_HTML_HEIGHT_END = 0
IT_ALV_GRAPHICS =
IT_HYPERLINK =
IT_ADD_FIELDCAT =
IT_EXCEPT_QINFO =
IR_SALV_FULLSCREEN_ADAPTER =
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
t_outtab = it_final
EXCEPTIONS
program_error = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
REWARD IF USEFULL -
How to create CWM2 Metadata using OWB 10.1.0.4
Hi
Somebody know how to create CWM2 Metadata using OWB 10.1.0.4 ?
Best RegardsThe process should be the same - however there are specific things you'll need to do if you are trying to deploy from JDev 10.1.3 to OAS 10.1.2.
For example: http://download.oracle.com/docs/cd/B32110_01/web.1013/b25947/deployment_topics.htm#CIHGIAAE -
How to create crystal reports using MSDE 2000?
Post Author: S_Muhilan
CA Forum: Deployment
Hi,
I am using Crystal report 8.5. My Database sqlserver 2000. I generated reports and are working fine.
Now I want to use MSDE 2000 instead of Sqlserver 2000 due to license factor.
My application is developed in VB 6. The all the parts of the application is working fine except the report.
All reports produced Database DLL error.
So I opened the report and try to verify the database. But it gives pdssql.dll not found. Database error.
After this error, I tried to create a new report and found that there is no option for MSDE 2000 database selection under more database.
I usually select Sql server 2000 database under More Database option of location wizard.
How to create crystal reports using MSDE 2000?
Is it due to crystal report 8.5 verison problem? I also have crystal report 11 licensed copy.
Please give me the good solution as early as possible
RegardsS. MuhilanTo use the inproc RAS SDK with CR.NET, you'd have to purchase either (1) Crystal Reports XI Release 2 Developer edition, and apply Service Pack 2 or above, or (2) Crystal Reports 2008 (not Crystal Reports Basic that comes with Visual Studio 2008).
Sincerely,
Ted Ueda -
HOW TO creat BAR CHART using ABAP Programming
DEAR ALL,
I want some help as to how to creat GRAPHICAL display using ABAP programing (BAR CHART) any sample codes Example will be very helpful.
Regards,
VJOn earlier versions, you can do something like this.
[code]
REPORT ZRICH_0005 .
DATA: BEGIN OF ITAB_DATA OCCURS 0,
DATANAME(15),
QUANTITY1 TYPE I,
QUANTITY2 TYPE I,
QUANTITY3 TYPE I,
END OF ITAB_DATA.
Data: BEGIN OF ITAB_OPTIONS OCCURS 0,
OPTION(20),
END OF ITAB_OPTIONS.
ITAB_DATA-DATANAME = 'Maple'.
ITAB_DATA-QUANTITY1 = 5500.
ITAB_DATA-QUANTITY2 = 6200.
ITAB_DATA-QUANTITY3 = 5900.
APPEND ITAB_DATA.
ITAB_DATA-DATANAME = 'Oak'.
ITAB_DATA-QUANTITY1 = 3500.
ITAB_DATA-QUANTITY2 = 5200.
ITAB_DATA-QUANTITY3 = 4400.
APPEND ITAB_DATA.
ITAB_DATA-DATANAME = 'Cherry'.
ITAB_DATA-QUANTITY1 = 1800.
ITAB_DATA-QUANTITY2 = 2200.
ITAB_DATA-QUANTITY3 = 1900.
APPEND ITAB_DATA.
CALL FUNCTION 'GRAPH_MATRIX_3D'
EXPORTING
COL1 = 'Jan'
COL2 = 'Feb'
COL3 = 'Mar'
TITL = 'Lumber Usage in $'
TABLES
DATA = ITAB_DATA
OPTS = ITAB_OPTIONS
EXCEPTIONS
OTHERS = 1.
[/code]
Regards,
Rich Heilman -
How to create material doc using bapi
hi all,
pls tell me how to create material doc using bapi ,
if i give po no , it will create material doc no .
advance thanks ,Hi venu,
Please go thru this example, it will help u.
REPORT ZBAPIMM01 LINE-SIZE 255 NO STANDARD PAGE HEADING
LINE-COUNT 065(001).
TABLES: T001L, "Storage Locations
MARA, "General Material Data
MAKT, "Material Descriptions
MBEW, "Material Valuation
MARC. "Plant Data for Material
DATA: BAPI_HEAD LIKE BAPIMATHEAD,
BAPI_MAKT LIKE BAPI_MAKT, "Material Description
BAPI_MARA1 LIKE BAPI_MARA, "Client Data
BAPI_MARAX LIKE BAPI_MARAX,
BAPI_MARC1 LIKE BAPI_MARC, "Plant View
BAPI_MARCX LIKE BAPI_MARCX,
BAPI_MBEW1 LIKE BAPI_MBEW, "Accounting View
BAPI_MBEWX LIKE BAPI_MBEWX,
BAPI_RETURN LIKE BAPIRET2.
DATA: BEGIN OF INT_MAKT OCCURS 100.
INCLUDE STRUCTURE BAPI_MAKT.
DATA: END OF INT_MAKT.
DATA: BEGIN OF INT_MAT OCCURS 100,
WERKS(4), "Plant
MTART(4), "Material type
MATNR(18), "Material number
MATKL(9) , "Material group
MBRSH(1), "Industry sector
MEINS(3), "Base unit of measure
GEWEI(3), "Weight Unit
SPART(2), "Division
EKGRP(3), "Purchasing group
VPRSV(1), "Price control indicator
STPRS(12), "Standard price
PEINH(3), "Price unit
SPRAS(2), "Language key
MAKTX(40), "Material description
END OF INT_MAT.
SELECT-OPTIONS:
PLANT FOR MARC-WERKS OBLIGATORY MEMORY ID PLT,
MATERIAL FOR MARA-MATNR MEMORY ID MAT,
MATLTYPE FOR MARA-MTART MEMORY ID MTY,
DIVISION FOR MARA-SPART MEMORY ID DIV.
PARAMETERS: F_FILE LIKE RLGRAP-FILENAME
DEFAULT 'C:\DATA\ZMATERIAL.XLS' MEMORY ID F_FILE,
GETDATA AS CHECKBOX, "Tick to download materials data to local harddisk
UPDDATA AS CHECKBOX. "Tick to update date to Materials Master
IF GETDATA = 'X'.
PERFORM DOWNLOAD_DATA.
PERFORM DOWNLOAD_FILE.
ENDIF.
IF UPDDATA = 'X'.
PERFORM UPLOAD_FILE.
PERFORM UPDATE_MM.
ENDIF.
FORM DOWNLOAD_DATA.
SELECT * FROM MARC WHERE LVORM EQ ' '
AND WERKS IN PLANT
AND MATNR IN MATERIAL.
CLEAR MARA.
SELECT SINGLE * FROM MARA WHERE MATNR = MARC-MATNR.
CHECK MATLTYPE.
CHECK DIVISION.
CLEAR MBEW.
SELECT SINGLE * FROM MBEW WHERE MATNR = MARC-MATNR
AND BWKEY = MARC-WERKS.
CLEAR MAKT.
SELECT SINGLE * FROM MAKT WHERE SPRAS = 'EN'
AND MATNR = MARC-MATNR.
WRITE:/ MARC-WERKS, "Plant
MARA-MTART, "Material type
MARA-MATNR, "Material number
MARA-MATKL, "Material group
MARA-MBRSH, "Industry sector
MARA-MEINS, "Base unit of measure
MARA-GEWEI, "Weight Unit
MARA-SPART, "Division
MARC-EKGRP, "Purchasing group
MBEW-VPRSV, "Price control indicator
MBEW-STPRS, "Standard price
MBEW-PEINH, "Price unit
MAKT-SPRAS, "Language key
MAKT-MAKTX. "Material description
INT_MAT-WERKS = MARC-WERKS. "Plant
INT_MAT-MTART = MARA-MTART. "Material type
INT_MAT-MATNR = MARA-MATNR. "Material number
INT_MAT-MATKL = MARA-MATKL. "Material group
INT_MAT-MBRSH = MARA-MBRSH. "Industry sector
INT_MAT-MEINS = MARA-MEINS. "Base unit of measure
INT_MAT-GEWEI = MARA-GEWEI. "Weight Unit
INT_MAT-SPART = MARA-SPART. "Division
INT_MAT-EKGRP = MARC-EKGRP. "Purchasing group
INT_MAT-VPRSV = MBEW-VPRSV. "Price control indicator
INT_MAT-STPRS = MBEW-STPRS. "Standard price
INT_MAT-PEINH = MBEW-PEINH. "Price unit
INT_MAT-SPRAS = MAKT-SPRAS. "Language key
INT_MAT-MAKTX = MAKT-MAKTX. "Material description
APPEND INT_MAT.
CLEAR INT_MAT.
ENDSELECT.
ENDFORM.
FORM DOWNLOAD_FILE.
call function 'WS_DOWNLOAD'
EXPORTING
FILENAME = F_FILE
FILETYPE = 'DAT'
FILETYPE = 'WK1'
tables
data_tab = INT_MAT
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_WRITE_ERROR = 2
INVALID_FILESIZE = 3
INVALID_TYPE = 4
NO_BATCH = 5
UNKNOWN_ERROR = 6
INVALID_TABLE_WIDTH = 7
GUI_REFUSE_FILETRANSFER = 8
CUSTOMER_ERROR = 9
OTHERS = 10.
IF SY-SUBRC = 0.
FORMAT COLOR COL_GROUP.
WRITE:/ 'Data Download Successfully to your local harddisk'.
SKIP.
ENDIF.
ENDFORM.
FORM UPLOAD_FILE.
call function 'WS_UPLOAD'
EXPORTING
FILENAME = F_FILE
FILETYPE = 'DAT'
FILETYPE = 'WK1'
tables
data_tab = INT_MAT
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_WRITE_ERROR = 2
INVALID_FILESIZE = 3
INVALID_TYPE = 4
NO_BATCH = 5
UNKNOWN_ERROR = 6
INVALID_TABLE_WIDTH = 7
GUI_REFUSE_FILETRANSFER = 8
CUSTOMER_ERROR = 9
OTHERS = 10.
IF SY-SUBRC = 0.
FORMAT COLOR COL_GROUP.
WRITE:/ 'Data Upload Successfully from your local harddisk'.
SKIP.
ENDIF.
ENDFORM.
FORM UPDATE_MM.
LOOP AT INT_MAT.
Header
BAPI_HEAD-MATERIAL = INT_MAT-MATNR.
BAPI_HEAD-IND_SECTOR = INT_MAT-MBRSH.
BAPI_HEAD-MATL_TYPE = INT_MAT-MTART.
BAPI_HEAD-BASIC_VIEW = 'X'.
BAPI_HEAD-PURCHASE_VIEW = 'X'.
BAPI_HEAD-ACCOUNT_VIEW = 'X'.
Material Description
REFRESH INT_MAKT.
INT_MAKT-LANGU = INT_MAT-SPRAS.
INT_MAKT-MATL_DESC = INT_MAT-MAKTX.
APPEND INT_MAKT.
Client Data - Basic
BAPI_MARA1-MATL_GROUP = INT_MAT-MATKL.
BAPI_MARA1-BASE_UOM = INT_MAT-MEINS.
BAPI_MARA1-UNIT_OF_WT = INT_MAT-GEWEI.
BAPI_MARA1-DIVISION = INT_MAT-SPART.
BAPI_MARAX-MATL_GROUP = 'X'.
BAPI_MARAX-BASE_UOM = 'X'.
BAPI_MARAX-UNIT_OF_WT = 'X'.
BAPI_MARAX-DIVISION = 'X'.
Plant - Purchasing
BAPI_MARC1-PLANT = INT_MAT-WERKS.
BAPI_MARC1-PUR_GROUP = INT_MAT-EKGRP.
BAPI_MARCX-PLANT = INT_MAT-WERKS.
BAPI_MARCX-PUR_GROUP = 'X'.
Accounting
BAPI_MBEW1-VAL_AREA = INT_MAT-WERKS.
BAPI_MBEW1-PRICE_CTRL = INT_MAT-VPRSV.
BAPI_MBEW1-STD_PRICE = INT_MAT-STPRS.
BAPI_MBEW1-PRICE_UNIT = INT_MAT-PEINH.
BAPI_MBEWX-VAL_AREA = INT_MAT-WERKS.
BAPI_MBEWX-PRICE_CTRL = 'X'.
BAPI_MBEWX-STD_PRICE = 'X'.
BAPI_MBEWX-PRICE_UNIT = 'X'.
WRITE:/ BAPI_HEAD, BAPI_MARC1.
call function 'BAPI_MATERIAL_SAVEDATA'
exporting
HEADDATA = BAPI_HEAD
CLIENTDATA = BAPI_MARA1
CLIENTDATAX = BAPI_MARAX
PLANTDATA = BAPI_MARC1
PLANTDATAX = BAPI_MARCX
FORECASTPARAMETERS =
FORECASTPARAMETERSX =
PLANNINGDATA =
PLANNINGDATAX =
STORAGELOCATIONDATA =
STORAGELOCATIONDATAX =
VALUATIONDATA = BAPI_MBEW1
VALUATIONDATAX = BAPI_MBEWX
WAREHOUSENUMBERDATA =
WAREHOUSENUMBERDATAX =
SALESDATA = BAPI_MVKE1
SALESDATAX = BAPI_MVKEX
STORAGETYPEDATA =
STORAGETYPEDATAX =
IMPORTING
RETURN = BAPI_RETURN
TABLES
MATERIALDESCRIPTION = INT_MAKT
UNITSOFMEASURE =
UNITSOFMEASUREX =
INTERNATIONALARTNOS =
MATERIALLONGTEXT =
TAXCLASSIFICATIONS =
RETURNMESSAGES =
PRTDATA =
PRTDATAX =
EXTENSIONIN =
EXTENSIONINX =
IF BAPI_RETURN-TYPE = 'E'.
WRITE:/ 'Error Message ', BAPI_RETURN.
ENDIF.
ENDLOOP.
ENDFORM.
*---End of Program
Reagrds,
Kumar -
How to create a complain using FM "CRM_ORDER_MAINTAIN"
Hi experts,
How to create a complain using FM "CRM_ORDER_MAINTAIN" and to capture the complain id which is auto generated.
Please help me finding solution
Thanks
Aisuryahi
try to create complaint manually and before save it go into debugging mode (\h in command window) and press save. debugging window opens and put a break point at function module CRM_ORDER_MAINTAIN. this will help you to identify the information that has to be sent to the FM to create a complaint. write code according to the information you found and after that call , CRM_ORDER_SAVE function module to save the transaction. in this fm ET_SAVED_OBJECTS you can find the newly created transaction id.
for new complaints you can use GUID_CREATE FM to create new guid and you can give this value to FM as you find and also to the CRM_ORDER_SAVE fm. call BAPI_TRANSACTION_COMMIT finally. hope it helps you. -
Pls give some ideas? how to create a function.
Make an MS-Access form to accomplish:
Use a list box to display part-time employees and their assignments (SSN, Hours, FullName). Include only those who currently work a total of less than 40 hours/week.
SSN , Hours and FullName are stored in 2 different table.
I have no idea how to implement this function. How to create this function to get SSN, Hours and LastName and FirstName (RecordSet which will be used in application)?
Thanks alot!I'm afraid this is an Oracle forum, not an MS-Access forum.
;) -
How to create multiple pages using flex application.
Hi all,
i am doing flex application which contains 5 different
pages,
to do this i have used viewstack component to navigate
between the pages.
this is working fine if all my pages are of same size. each
page as different background image.
but i have to create pages with different sizes.
my first and second page are small and remaining pages are
big.
when i navigate to 3rd or 4th page, it is showing scrollbar
inside swf.
but i want scrollbar for browser window not inside my swf
anyone please guide me how to create pages in flex
application.
i have one more doubt, if my page contains some html links ,
how to open those links,
is it posible to open the link in new window.
please help me , i have no idea how to create web
applications using flex
Thanks in advance
regards
avanthikaHi inlineblue,
Thanks for your reply,
you asked about sample code,
following is my sample code.
In my Application mxml file, i am loading all custom
components for each page.
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="
http://www.adobe.com/2006/mxml"
xmlns="*"
horizontalAlign="center" verticalAlign="top"
styleName="plain"
backgroundColor="#FFFFFF"
creationComplete="init()" width="780" height="594" >
<mx:Script>
<![CDATA[
//navigating to next page
public function showNextStep(newIndx:int):void{
vs.selectedIndex=newIndx;
//navigating to previous page
public function showPreviousStep(newIndx):void{
vs.selectedIndex=newIndx
]]>
</mx:Script>
<mx:ViewStack id="vs" paddingLeft="0" height="100%"
width="100%" >
<mx:Canvas id="s1" label="step1"
backgroundImage="assets/Step1.jpg" >
<!-- Step1.jpg image size is width=778, height=560 -->
<mx:HBox paddingLeft="8" width="780" height="548">
</mx:HBox>
<mx:Button alpha="0" buttonMode="true" x="697" y="18"
click="showNextStep(1)" width="72" height="24" />
<mx:Button alpha="0" buttonMode="true" x="697" y="508"
width="72" click="showNextStep(1)" height="24"/>
</mx:Canvas>
<step2 id="s2" label="Step2" hideEffect="{blurImage}"
showEffect="{unblurImage}" />
<step3 id="s3" label="Step3" hideEffect="{blurImage}"
showEffect="{unblurImage}" />
<step4 id="s4" label="Step4" hideEffect="{blurImage}"
showEffect="{unblurImage}" />
<step5 id="s5" label="Step5" hideEffect="{blurImage}"
showEffect="{unblurImage}" />
</mx:ViewStack>
</mx:Application>
// following is the page2 (step2) component code
<?xml version="1.0" encoding="utf-8"?>
<mx:Canvas xmlns:mx="
http://www.adobe.com/2006/mxml"
creationComplete="init()"
backgroundImage="assets/Step2.jpg" width="778" height="600"
>
<!-- Step2.jpg image size is width=778, height=600 -->
<mx:HBox horizontalAlign="left" paddingLeft="5"
height="511" width="768">
</mx:HBox>
<mx:Button alpha="0" buttonMode="true" x="648" y="6"
click="this.parentApplication.showPreviousStep(0)" width="61"
height="24"/>
<mx:Button alpha="0" buttonMode="true" x="711" y="6"
click="this.parentApplication.showNextStep(2)" width="53"
height="24"/>
<mx:Button alpha="0" buttonMode="true" x="651" y="529"
width="58" click="this.parentApplication.showPreviousStep(0)"
height="24"/>
<mx:Button alpha="0" buttonMode="true" x="712" y="528"
width="54" click="this.parentApplication.showNextStep(2)"
height="24"/>
</mx:Canvas>
// following is the code for page3 (step3) component
<?xml version="1.0" encoding="utf-8"?>
<mx:Canvas xmlns:mx="
http://www.adobe.com/2006/mxml"
creationComplete="init()"
backgroundImage="assets/Step3.jpg" >
<!-- Step3.jpg image size is width=778, height=660 -->
<mx:VBox width="763" height="668">
</mx:VBox>
<mx:Button alpha="0" buttonMode="true" x="644" y="10"
click="this.parentApplication.showPreviousStep(1)" width="61"
height="24"/>
<mx:Button alpha="0" buttonMode="true" x="708" y="10"
click="this.parentApplication.showNextStep(3)" width="53"
height="24"/>
<mx:Button alpha="0" buttonMode="true" label="Back"
x="625" y="590" width="58"
click="this.parentApplication.showPreviousStep(1)" height="24"/>
<mx:Button alpha="0" buttonMode="true" x="694" y="590"
width="68" click="this.parentApplication.showNextStep(3)"
height="24"/>
</mx:Canvas>
// following is code for page4 (step 4),
<?xml version="1.0" encoding="utf-8"?>
<mx:Canvas xmlns:mx="
http://www.adobe.com/2006/mxml"
creationComplete="init()"
backgroundImage="assets/Step4.jpg" >
<!-- Step4.jpg image size is width=778, height=773 -->
<mx:VBox width="762" height="792">
<!-- User interface -->
</mx:VBox>
<mx:Button alpha="0" buttonMode="true" x="644" y="15"
click="this.parentApplication.showPreviousStep(2)" width="61"
height="24"/>
<mx:Button alpha="0" buttonMode="true" x="708" y="16"
click="this.parentApplication.showNextStep(4)" width="53"
height="24"/>
<mx:Button alpha="0" buttonMode="true" x="644" y="710"
width="58" click="this.parentApplication.showPreviousStep(2)"
height="24"/>
<mx:Button alpha="0" buttonMode="true" x="703" y="710"
width="54" click="this.parentApplication.showNextStep(4)"
height="24"/>
</mx:Canvas>
// Following is code for Page 5 (step 5 ) component.
<?xml version="1.0" encoding="utf-8"?>
<mx:Canvas xmlns:mx="
http://www.adobe.com/2006/mxml"
creationComplete="init()"
backgroundImage="assets/Step5.jpg" width="778"
height="600">
<!-- Step5.jpg image size is width=778, height=539-->
<mx:VBox paddingLeft="170" paddingTop="170" width="778"
height="522">
</mx:VBox>
<mx:Button alpha="0" buttonMode="true" x="654" y="41"
click="this.parentApplication.showPreviousStep(3)" width="72"
height="24"/>
<mx:Button alpha="0" buttonMode="true" x="654" y="486"
width="72" click="this.parentApplication.showPreviousStep(3)"
height="24"/>
</mx:Canvas>
I am getting vertical scrollbar for page3 and page4,
please tell me how to avoid this, Is their any other method
to do this.
Following is the link for my above code
http://www.emantras.com/flexdemo/sample.html
in this application one more problem is also their,
background image loads very slow, before it loads all the flex
components will load. So when you open this please wait till
background image loaded, to move to next and back pages.
Thanks for your time and consideration.
Regards
Avanthika -
How to Create a Functiona Query
Dear all,
Could any body detail me how to create a functional query. Please give me step by step procedure to create a query.
I would appreciate if you can give me a material with screen shots. Your help will be highly appreciated.
Thank you
Raghu RamHi Raghu,
Go through this document it may help you,
SAP Query
Step 1: Create User Group SQ03
Follow the menu path SAP Menu > Tools > ABAP Workbench > Utilities > SAP Query > User Groups
a) In the User Group: Initial Screen -
Enter User Group Code (self named)
Click on Create
b) In the User Group (Code): Create or Change pop-up window -
Enter the User Group Description
Click on Save
c) In the Create Object Directory Entry pop-up window -
Ö Click on Local Object button
Ö The User Group Created is saved
Step 2: Create User Group SQ02
Follow the menu path SAP Menu > Tools > ABAP Workbench > Utilities > SAP Query > Infosets
a) In the Infoset: Initial screen -
Ö Enter Infoset Code (self named)
Ö Click on Create button
b) In the Infoset: Title & Database Screen -
Ö Enter Description of Infoset in the Name field
Ö In the Data Source selection: Select appropriate Data Source by clicking
the radio button
· Source the data can either be multiple tables OR single table. There are 4
options for the user to select from
Ö Click on Continue (Enter)
Ö Selected Table gets displayed in the Infoset : Initial Screen
c) In the Infoset: Initial Screen -
Ö Click on Insert Table button
d) In the Add Table Screen -
Ö Enter the Table Name that is to be inserted
Ö Click Continue (Enter)
e) In the Infoset: Initial Screen -
Ö Click on Back button
f) In the Field Group Defaults pop-up Screen -
Ö Select Appropriate Field Group Option by clicking on the radio button
· there are 3 options to select from. User can select Empty Field Group
option and then select the data fields in the steps explained further.
Alternatively, User can select an option which clubs all the data fields
From all the tables selected
Ö Click Continue (Enter)
g) In the Change Infoset Screen -
· the left side lists the Tables that the user has selected in step b, c & d
· In the right side, system creates field groups, one for each table listed in the
left part. Initially, the Field Groups are empty
Ö In the Left Side, Click on the arror next to the table name and expand and
display all the data fields in the table
Ö Select a Data Field from the expanded Table view, which is to be added to
the Field Group on the right.
Ö Select a Field Group on the right side, in which Data Field selected above
has to be added
Ö Right click on the Data Field selected and click on Add Field to Field Group
Ö The selected Data Field gets added to the selected Field Group, which is
indicated by an arrow next to the Field Group.
Ö Carry out the steps above to add the required Data Fields to the respective
Field Groups
Ö After transferring Data Fields to Field Groups click on Generate button
h) In the Create Object Directory Entry Screen -
Ö Click on Logical Object button to generate the infoset
i) In the Change Infoset Screen -
Ö Click on the Back button
j) User is taken back to the Infoset: Initial Screen which displays the
created Infoset record.
Step 3: Assigning User Group to Infoset SQ03
Follow the menu path SAP Menu > Tools > ABAP Workbench > Utilities > SAP Query > User Groups
a) In the User Groups: Initial screen -
Ö Enter the User Group for which Infoset is to be assigned
Ö Click on Assign Users & Infosets button
b) In the User Group: Assign Users Screen -
Ö Click on Assign Infosets button
c) In the next screen, select the Infoset, which needs to be attached to the
User Group selected
d) Click on the Back button
Step 4: Creating Query SQ00 & SQ01
Follow the menu path SAP Menu > Tools > ABAP Workbench > Utilities > SAP Query > Queries
a) In the Query from User Group: Initial Screen -
Ö Click on Other User Groups button
Ö In the pop-up screen, User Groups, select the User Group for which the
Query has to created. The pop-up screen closes.
Ö Enter the Query Code in the Query field
Ö Click on Create button
b) A pop-up screen Restrict Value Range shows the list of Infosets assigned to
the User Group
Ö Select the Infoset for which Query has to be created
c) In the new screen Create Query: Title, Format -
Ö Enter the Description of the Query in the Title field
Ö Click on the Next Screen button
d) In the Select Field Group screen
Ö Select the Field Groups from which Data Fields have to be selected for the
Output
Ö Click on the Next Screen button
e) In the Select Field screen -
Ö Select the Data Fields, which should appear in the output
Ö Click on the Next Screen button
f) In the Screen Selection -
Ö Select the Data Fields for the selection criteria
Ö Enter the sequence in which the selected fields would appear in the input
screen of the query.
Ö Define if the selection criteria should be Single Value or Multiple Value Range
by clicking in the appropriate check boxes
Ö Click on the Basic List button
g) In the screen Query Layout Design -
Ö Select the Output Fields from the Data Fields section by clicking the
appropriate check box
Ö Change the sequence of Data Field columns if required
Ö Click on the Test button to test the query created
h) On the Test Query screen click Continue
i) In the Query screen -
Ö Enter the selection criteria
Ö Click on Execute button
j) Save the Query created
Step 5: Running the Query SQ00
a) In the Query From User Group: Initial screen
b) Click on Other User Groups button to select the User Group
c) In the pop-up screen User Groups select the User Group
d) System lists all the queries created for the User Group
e) Select the appropriate Query
f) Click on Execute button
g) User is taken to the Selection screen
h) Enter the selection criteria and click on Execute button
i) System runs the query and gives the output
Regards,
Murali.
Maybe you are looking for
-
Yesterday i received a .ai file and when i tried to open it in CS5 it would not open and gave me the message "Can't open the illustration. Could not complete the requested operation." On a whim I decided to try it in CS3 on another computer and it op
-
A problem displaying PDF file in the Web Browser layout.
I'm hoping someone can help me with this issue. I need to display my PDF documents in the web-browser layout as part of my daily job. I use JAWS 14, and many times, when my document is launched, it comes up blank, or at least that's what JAWS repor
-
my serial number is not working and I realized I had bought the windows version instead of mac. Is it a multi platform serial number? if it is, is there a time delay before it works? Thanks!
-
After updating silverlight, i'm unable to open any pdf files in the system
After updating silverlight, i'm unable to open any pdf files in the system
-
CS-MARS user authentication using Cisco ACS
Hi, I would like CS-MARS (Web Interface) user authenticaiton to be done by Cisco ACS Server. Please let me know, either it is possible or not? And if possible then reply how to configure it. Thanks and Regards, Ahmed Shahzad.