How to create personal number

Hello everybody ,
please tell how to create personal number in Tcode :- PA40 please mention the steps

hi sandeep,
do the followings
1.) go to PA40 check the customization ,,,if exists...then personal no will automatically be generated.
2.)otherwise....go to PA40 ..it will have some screens ...fill the mandatory fields.....save it and personel no. will automatically geanerated
thnxs n regards
sachin
njoy life

Similar Messages

RE: How to Create Personal number in SAP HR

Hi Guys,
I am new to SAP HR and i want to Create Personnel number in HR, can any one guide me the procedure.
I went to PA30 and entered some 8 digit number and typed in infotype 0105 and subtype 0001 and clicked on create button, but it returns a error saying personnel number is not yet assigned.
can any one tell me how to create a personnel number and assign it to the user.
Thanks,
SSSS

Hi..
Priyanka..
As I have checked that Number range for generating a new Employee ID is already created in my system. Gone to TCODE PA04 and check that the number range is already created as below:
Number         From Num      To Num           Current Num              Ex
01               00000001          00069999                                        Tick as right
02               00070000          00079999       70295
03               00080000          09000000                                        Tick as right
04               99990001          99999999                                        Tick as right
05               09000001          99990001                                        Tick as right
But when i am trying to give the personnel no. for maintaining master data in pa30 for actions for new hiring its giving error saying "could not find interval for number range 07". Here i am getting confused that what no. range i have to take? or which no. range i have to choose? or create new no. range? Please help me out..
regards,
Surendra

HOW TO CREATE EXTERNAL NUMBER RANGE IN OM

HI ALL
HOW TO CREATE EXTERNAL NUMBER RANGE IN OM
PLEASE GIVE ME SPOON FEEDING
IT IS VERY URGENT FOR ME
PLEASE PLEASE AND PLEASE
REGARDS

ok i understood u want the img path for maintaing
positions ,jobs , Org units
Path:IMG->Personnel Mgmt->OM->Basic Setting->Maintain Number ranges.
IMG go to Personnel Management -> Organizational Management -> Basic Settings
-> Maintain Number Ranges.
Select subgroup $$O to maintain number range for Org Unit and click on Number range Maintenance. Then click on change Intervals. Now you can create both internal and external number range for Org Unit according to your requirement.
Similarly for Position select subgroup $$S and follow the same process.
Edited by: Sikindar on Feb 7, 2008 11:23 AM
Edited by: Sikindar on Feb 7, 2008 11:28 AM

How to create a number ranges in QM notification?

Hi Exprets
How to create a number ranges in QM notification?
Please help me...
Ram

Deat Thyagarajan,
Notification type 01
Notification cat 05
Parameters
Notification origin General Notification
Catalog profile SAPISR
Early no.allocation 06 Number range
My Notification type 01, I am assined 06 number range. 06 number range have limit 1-100000.
I have used upto 100000. Now how I can extend my number limit.
Thanks for support...
Ram

How to create a Number range?

Hi,
How to create a number range for a field to give our own number for a field?

Hello,
Go to transaction SNRO.
Take a look at these: [https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/840ad679-0601-0010-cd8e-9989fd650822#q-13] and [http://help.sap.com/saphelp_nw04/helpdata/en/7b/6eb2aa7aed44ea92ebb969e03081fb/frameset.htm]
Regards,

How to create personal templates in SRM 4.0

Dear all
We are upgrading from EBP 3.0 to SRM 4.0 and we don't see in SRM 4.0 how to create personal templates.
The transaction BBPSC05 Create template create central/public templates and not personal ones (also if given to a basic user).
1) In the Shopping Cart we can go to Old Purchase Order and Tempaltes and there we can select on status Personal Template but were can we create them?
2) Additional question, how can we limit the availability of a public/central template to a certain users from some company or plant or ...
Thanks

Hi RD,
1) for detailed explanations read my answer in this thread:
SRM 4.0 Shopping cart templates
2) such limitation does not exist in SRM, even if often asked by customers: the possibility to maintain templates centraly at a level between the public (every user can see them) and the private template (only the user can see them). So you would have to change the standard search logic on templates, and implement an additional serach criteria.
Rgds
Christophe
PS: please reward points for helpful answers

How to create Personalized urls

how to create personalized urls like firstname.lastname.abc.com with out making any individual sub-domain records in DNS

Hey Ben,
Yes it is possible to create dynamic URL's.
1. Simply select the link from the table like so.
SELECT PK_ID,
       NAME,
       LINK
FROM IMAGE_INFO2. Edit the region and go to report attributes.
3. Click the pencil to edit the link column.
4. Scroll down to the column link section and enter something like 'View' as the link text. You can change that to whatever you like.
5. Change the target form page in application to url.
6 In the URL text object enter *#LINK#*. This will substitute #LINK# for the value that is returned by the sql statement in the LINK column.
Seeing how you are linking to an image you could just do something like this:
SELECT PK_ID,
       NAME,
       '<img class="mug_shot" src="' || LINK ||'" title="'|| NAME ||'" alt="'||NAME ||'" />' IMAGE,
FROM IMAGE_INFOThis will generate an image tag and show the image inline with the record. Since this species a class you could use CSS in your header section to format the image to a standard size. Something like:
<style type="text/css">
.mug_shot{
   width:200px;
   height:200px;
</style>Good Luck,
Tyson
Edited by: Tyson Jouglet on Jan 12, 2009 4:13 PM

How to Pass personal number(pernr) to the ESS Webdynpro ABAP Application

Hi,
How to pass personal number of employee to the standard ESS webdynpro ABAP application as application parameter of iview.
Thanks
Srikanth

Hi
For WebDynpro application in iView there is a property to set Parameter for WebDynpro application.
Handel these passed parameters in Default plug of Interface Controller.
Note string passed as parameter in iview is case sensitive.
Try this code to get URl of Deployed application
String appURL = null;
try {
     WDDeployableObjectPart currentAppPart =wdThis
                              .wdGetAPI()
                              .getComponent()
                              .getApplication()
                              .getDeployableObjectPart();
appURL = WDURLGenerator.getApplicationURL(currentAppPart);
} catch (final WDURLException ex) {
wdComponentAPI.getMessageManager().reportException(
                         new WDNonFatalException(ex),
                         false);
Mandeep Virk

How to create person in Organisation staffing ?

Hi
I need to know how to create person in Organisation staffing.......Object type P ?
thanks in advance,
R

Hello Jai and IA,
About discussion of RSWUWFML2
As per my understanding -
Notification - This report sends out notification of dialouge workitems in ready status to the agents and also to substitutes. This is nothing but email in outlook/lotus/any other mail system. The content is decided by the description of task of the dialouge workitem. This is basic functionality along with several other add ons too
Send out WI - One of the option in the above report is to attach an executable attachement . There are three types of attachemnt - execute workitem, display workitem, display inbox. If this is what can be called as 'sending out WI' then yes it sends out WI.
If say; you are using position then as agent determination then it will find the user name attached with that position and send out work item to that user, but it wont derive the email addresses
I understand using position as agent determination
but i dont understand using position in send mail step of workflow. what is the use of putting position in the recipient section of send mail step ?
Coming to the actual question: Maintaining Person is not the solution. For external users, ztable should suffice or use SAP's TVARV table :
is it not possible to use Person as suggested above ? which i am putting in steps below.....
1. Create Person object (I dont know difference btw Person and CP, will check that)
2. Maintain email address of Person object as infotype 0105
3. Place the Person object as required in the heirarchy in Org staffing (PPOMW)
4. insert a step in workflow that will pick that correct Person object as required and read the email address in 0105 and pass it to the SOXNA table container element of workflow
5. Pass this SOXNA container element to the send mail step by putting 'Expression' in the recipient section
This way you can accomplish sending email notification to external email address of non SAP users.
I am doing these steps to check andwill let you know the result.
I cannot use Z table , the client strictly disallows that. I will check in TVARV.

How to create REQUEST NUMBER for STANDARD TEXT (SO10)

how to create REQUEST NUMBER for STANDARD TEXT ( t-cODE SO10)

you can do this using program RSTXTRAN .
Text key - object
Text key - name
Text key - ID
Text key - language, then it will store under one transport that can be moved to other system.
check out the following link.
http://help.sap.com/saphelp_47x200/helpdata/en/f4/b4a1ed453611d189710000e8322d00/frameset.htm

How to create Job number + Activity

Hi All,
I need to create Job nuber with activity for Forecast , In existing jobnumbers it shows some acton in List of actions.. How to create the Action
Please explain me the use job number and Activty , action .. and how to create .
Thanks in Advance,
Regards,
Chandu

Chandu,
1) I think the best book for basics of APO is Supply Chain management with SAP APO by Jörg Thomas Dickersbach . You have to have it
http://books.google.co.in/books?id=5CA3y7_LY2MC&pg=PA167&lpg=PA167&dq=supplychainplanningAPOdickersbach&source=bl&ots=xuV5qbwq7V&sig=v1UmlBoA3v0T1zvdfOJYngFPaJI&hl=en&ei=9v8MTK2pCM-LkAWUyP3ZDw&sa=X&oi=book_result&ct=result&resnum=1&ved=0CAkQ6AEwAA
2). try sourcing the SAP SCM certification books
3). Help.sap.com. I dont think you can find any material more detailed than this
4). Access SDN and look for wiki and blogs
5). GOOGLE!!! For instance thsi si something really really useful I found on Google for CIF:
http://www.valconusa.com/uploads/Managing_SCM_APO_CIF_4x.pdf
Happy learning!!
Abhi

How to create personal site using csom ?

I am using Office 365. I am trying to create personal site using following code
private void createPersonalSite()
try
//using (SPSite site = new SPSite("Site URL"))
//SPServiceContext context = SPServiceContext.GetContext(site);
var targetSite = new Uri("https://test/sites/18thFeb");
var securePassword = new SecureString();
foreach (char c in adminPassword)
securePassword.AppendChar(c);
adminUserId = "[email protected]";
var onlineCredentials = new SharePointOnlineCredentials(adminUserId, securePassword);
ClientContext clientContext = new ClientContext("https://test/sites/18thFeb");
clientContext.Credentials = onlineCredentials;
//Get user profile
//// Get the PeopleManager object and then get the target user's properties.
//Microsoft.SharePoint.Client.UserProfiles.PeopleManager peopleManager = new Microsoft.SharePoint.Client.UserProfiles.PeopleManager(clientContext);
//Microsoft.SharePoint.Client.UserProfiles.PersonProperties personProperties = peopleManager.GetPropertiesFor("domainName\\userName");
//personProperties.UserProfileProperties.
Microsoft.SharePoint.Client.UserProfiles.ProfileLoader loader = Microsoft.SharePoint.Client.UserProfiles.ProfileLoader.GetProfileLoader(clientContext);
Microsoft.SharePoint.Client.UserProfiles.UserProfile profile = loader.GetUserProfile();
Microsoft.SharePoint.Client.Site personalSite = profile.PersonalSite;
clientContext.Load(personalSite);
clientContext.ExecuteQuery();
// Let's check if the site already exists
if (personalSite.ServerObjectIsNull.Value)
// Let's queue the personal site creation using oob timer job based approach
// Using async mode, since end user could go away from browser, you could do this using oob web part as well
profile.CreatePersonalSiteEnque(true);
//clientContext.ExecuteQuery();
catch
int a = 10;
The above code runs without any exception but does not create personal site. Can anyone please let me know what is the issue? Can you please provide me any code or link through which I can resolve the above issue?

Hi,
According to your post, my understanding is that you want to create personal site using Client Object Model in SharePoint Online.
The following code snippet for your reference:
public void CreatePersonalSiteUsingCSOM(string tenantAdminUrl, string userName, string password, string[] emailIDs)
using (ClientContext _context = new ClientContext(tenantAdminUrl))
try
SharePointOnlineCredentials _creds = new SharePointOnlineCredentials(userName, Utilities.StringToSecure(password));
_context.Credentials = _creds;
_context.ExecuteQuery();
ProfileLoader _profileLoader = ProfileLoader.GetProfileLoader(_context);
_profileLoader.CreatePersonalSiteEnqueueBulk(emailIDs);
_profileLoader.Context.ExecuteQuery();
catch(Exception _ex)
throw;
More information is here:
http://blogs.msdn.com/b/frank_marasco/archive/2014/03/25/so-you-want-to-programmatically-provision-personal-sites-one-drive-for-business-in-office-365.aspx
Best Regards
Dennis Guo
TechNet Community Support

How to create Personal Calendar

Anyone know how make personal calendar. I mean is that if any user login into portal and view calender app. he/she can only view the activities that he/she created not the whole activities on the table.
Thanks.

Hi Viral,
I created a report, for which i want to pass some user parameters like from_date and to_date. So, i want to create a value set which will show a calendar when we click on that, while we are passing parameter.
for ex: in po_approval when we click on need by date a calendar appears , i want it the same way to come for my user defined parameter.
--regards
--raj

How to create Batch number manually

Hi,
We have already done 105 without batch number. But we need to create the batch number for the quantity which is already inwarded in 105.
Please let me know how this can be done.
regards
Suresh

if your material is batch managed, then SAP forces you to enter a batch number (or assign an internal batch number) while doing the 105 movement.
As this was not the case for you, I assume you missed to maintain the batch management indicator in material master.
In this case you have to make current and previous period stock zero, then you can set the batch mangement indicator. Maybe you have to delete open documents too (SAP will tell you this in an error log when you try to set the indicator)

How to create Unique Number.

I need to create a Unique Request Number for System.
how Can i create this in Oracle.
Regards,
Agrawal's

I have One table Says PRINT_MGMT_LOG & in this table there are more than 10 columns, so can i create SEQUENCE in this table or should i make a new table having one column to store these running number.
Which one will be better considering performance issues.

How to create personal number

Similar Messages

Maybe you are looking for