How To Create Plugin/Script

I have seen some source for LR plugins/scripts. However, searching for some books or posts on this forum I have not found any information on how to create such plugins/scripts. Where can I find some documentation about that?

http://www.adobe.com/devnet/photoshoplightroom.html
http://forums.adobe.com/community/lightroom/lightroom_sdk
Beat

Similar Messages

Creating Plugin Script

Hi Friends,
I want to create plugin script for algorithm ,can any one pls explain me doubts to crate this plugin
1.In Plugin Script How can i get the soft paramenters (like in service script we have schema containts local variables(parms) for getting values from ui)
2.how can we include new hard parameters into Algorithm entity(should we place use=input/output)
My Requirment is the plugin script should take accountid and return boolean value by validating contracted quantity.
i tested this requirment with one simple ui and service script which use Bussiness Service .how can i convert service script to plugin script
For creating plugin script i am taking Ratecomponet as algorithm entity.here how can i get accountid and how can i send boolean value as a result.
thanks&regards
sivaram

Your requirements are a bit confusing, when you say "contracted quantity", are you referring to the Contract Quantity defined on the Service Agreement (if maintained)? OR since you have mentioned Account, is the "contracted quantity" defined on the Account as a Characteristic?
If the latter then you don't need any Algorithm or Plug-in Script to do the task, you can configure Rate Component Eligibility - Criteria Field as 'Characteristic' and specify Account as the Characteristic Entity and choose the characteristic type. Also, use Rate Component Eligibility - Criteria Comparison and specify the logical operator for comparing the retrieved "contracted quantity" on the Account. Alternatively, you could also configure a SQ Rule having SQ Algorithm of type 'Characteristic Value' and retrieve the "contracted quantity" from the Account. In this case you can then have Rate Component Eligibility - Criteria Field to be 'Service Quantity', select the SQI defined on the SQ Rule and do the comparison.
If the former, you need to define a SQ Rule (also configured on the Rate Schedule) to fetch the Contract Quantity of a specific type on the SA and assign it to the SQ Array of your choice.
In either case you don't need a custom Plug-in Script / Algorithm (I assume Rate Component - Criteria Field spot/entity).
Nevertheless, if you still want to define an Algorithm for Rate Component - Criteria Field entity, you should keep following points in mind (considering your requirement):
- Account Id is not available in the given script schema, although SA Id is available, hence you'd need a Business Service to retrieve the Account Id from the SA Id.
- After evaluation, you need to return a boolean for following"output" parameters, either true or false:
parm/hard/isSingleCriteriaFieldValue
parm/hard/singleCriteriaFieldValue
parm/hard/isCriteriaFieldFound- Thereafter, compare the boolean value under Rate Component Eligibility - Criteria Comparison and set the "If True" and "If False" conditions as per your requirements.

How to create installation scripts in packaged application

can u tel me How to create installation scripts for packaged application.
also tell me , i have to first install scripts and then supporting objects or
supporting objects first then installation scripts..

Hi,
Depending upon your usecase there are different ways to implement this logic.
Check this for example (Read my answer in this post):
https://forums.sdn.sap.com/thread.jspa?threadID=349151
Also check these senarios:
http://help.sap.com/saphelp_nw70/helpdata/en/42/9ddf20bb211d72e10000000a1553f6/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/en/42/9ddcc9bb211d72e10000000a1553f6/frameset.htm
Also the delegation may be interesting for you:
http://help.sap.com/saphelp_nw70/helpdata/en/a0/44b742cafec96ae10000000a155106/frameset.htm
Greetings,
Praveen Gudapati

How to create sap scripts? script is a language how to create script ?

how to create sap scripts?
script is a language how to create script ?

hi ,
step by step procedure.
SAP Scripts
http://www.sap-img.com/sapscripts.htm
http://sappoint.com/abap/
http://www.henrikfrank.dk/abapexamples/SapScript/sapscript.htm
http://help.sap.com/saphelp_crm40/helpdata/en/16/c832857cc111d686e0000086568e5f/content.htm
http://www.sap-basis-abap.com/sapabap01.htm
http://www.sap-img.com/sapscripts.htm
http://searchsap.techtarget.com/tip/1,289483,sid21_gci943419,00.html
http://sap.ittoolbox.com/topics/t.asp?t=303&p=452&h2=452&h1=303
http://www.sapgenie.com/phpBB2/viewtopic.php?t=14007&sid=09eec5147a0dbeee1b5edd21af8ebc6a
Other Links
http://www.virtuosollc.com/PDF/Get_Reporter.pdf
http://help.sap.com/saphelp_47x200/helpdata/en/da/6ada3889432f48e10000000a114084/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/66/bc7d2543c211d182b30000e829fbfe/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/5b/d22cee43c611d182b30000e829fbfe/frameset.htm
http://www.virtuosollc.com/PDF/Get_Reporter.pdf
http://help.sap.com/saphelp_47x200/helpdata/en/da/6ada3889432f48e10000000a114084/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/66/bc7d2543c211d182b30000e829fbfe/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/5b/d22cee43c611d182b30000e829fbfe/frameset.htm
http://www.thespot4sap.com/Articles/Code_CostCentreReport.asp
http://www.allsaplinks.com/dialog_programming.html
http://help.sap.com/saphelp_webas630/helpdata/en/9f/db9cdc35c111d1829f0000e829fbfe/frameset.htm
http://www.allsaplinks.com/files/using_table_in_screen.pdf
http://www.geocities.com/ZSAPcHAT
http://www.sappoint.com/abap/ssintro.pdf
http://www.sappoint.com/abap/sscript.pdf
http://www.sappoint.com/abap/sscript.pdf
http://www.sappoint.com/abap/lsetssap.pdf
http://www.sappoint.com/abap/sscrtpex1.pdf
http://www.sap-img.com/sapscripts.htm
http://www.thespot4sap.com/Articles/SAPscript_Introduction.asp
http://www.sapbrain.com/TUTORIALS/TECHNICAL/SAPSCRIPTS_tutorial.html
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVSCRPROG/BCSRVSCRPROG.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVSCRRDI/BCSRVSCRRDI.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVSCREDIT/BCSRVSCREDIT.pdf
http://www.sappoint.com/abap/sscrtpex1.pdf
http://www.sap-img.com/sapscripts.htm
http://www.esnips.com/doc/1ff9f8e8-0a4c-42a7-8819-6e3ff9e7ab44/sapscripts.pdf
sri

How to Create Plugin for InDesign?

Hi,
I am working with InDesign Scripting very well and now I want to start working with plugin for InDesign CS3 because of the limitation of the Scripting. But I have no idea, how to start and where to start creating Plugin for InDesgn CS3.
I am using Windows OS
Can someone tel me clearly how and where to start Creating Plugin and suggest me any plugin editor for Win OS. You can also suggest me at [email protected]
Someone pls guide me.......
Thank You.

Hi, Praveen
Thanks for your reply,
I am going to look for "programming-guide.pdf" and then take further steps to plugin.
But can you tell me what are the resources that can be created by Eclipse 3.2.2 and why we use two Editors (VC++ Editor and Eclipse 3.2.2) here.
Thanks,
Vivek

How to create a scripting language in java?

Hello,
All that I want to do is to create a scripting language in java. I�m familiar with javacc, jsr223 and other things but don�t know how to start. The language syntax is java 5 syntax with some change and I want to generate java source code from small scripts. In fact I don�t know how other languages (like groovy) are created.
I hope you can show me the required steps.
Looking forward to hear from you.
Thanks.

That's all, huh?
For a start, generally when I hear "scripting language" I'm thinking interpretter, not a system which creates compiled (or compilable) code.
I get the impression that what you're talking about is what I'd call a "preprocessor" language, some extra syntax added to java which the preprocessor renders into ordinary java.
As far as complexity is concerned, much depends on how deeply involved the extra syntax is with the embedded ordinary Java. Does you preprocessor need to understand the java, or is it just embedded as text? How easilly identified are your preprocesor statments? It's a lot easier to do this if preprocessor lines are instantly identifiable from Java code (e.g. start with a #).
Basically the stages are always the same;
1) Lexical analysis i.e. picking out words, operators, numbers, quoted strings.
2) Construct a syntax tree.
3) Generate code (in this case Java).
Now, in this case, some of the nodes in the syntax tree may simply be chunks of undigested Java.

How to Create a Script in Greasemonkey?

Hello all, I have a couple of things.
One is a rather chronic problem with scrolling on Tumblr (pages with backgrounds that do not scroll have varying degrees of choppiness/stalling scrolling. Just look at my past questions to see a more detailed description), and the other is a script that fixes the problem (again, see past question replies for the script).
While it is a very small nitpick, I would like to know how to place that script in Greasemonkey, since it is a bit annoying to have to do it manually for every page that requires the script.
I tried looking at Greasemonkey to see if it was something I could do myself, but I decided I would go to those who (might) know, because with my luck I would mess up something crucial.
So...my two questions:
1) How does one make a Greasemonkey script? Or more like, how would one insert an existing script into Greasemonkey?
2) Is there a way to make said script automatically affect only the pages that would need it (for example, only tumblr pages with non-scrolling backgrounds? Since those with no/scrolling backgrounds are fine), or would I need to manually enter in the pages in question as I encountered them?

'''Edit: I read too fast. The rule in this thread is for content, and therefore goes into the userContent.css file. Please ignore this post for purposes of the above rule.'''
Here's how to manually create/edit the userChrome.css file:
(1) Find (or create) the chrome folder. This is a folder in your currently active Firefox settings folder, also known as your Firefox profile folder.
* Open the your profile folder using: Help > Troubleshooting Information
** Windows: Click the "Show Folder" button
** Mac: Click the "Show in Finder" button
* Check for a chrome folder.
** If it exists: double-click it to open it.
** If it does not exist: create a chrome folder, then double-click it to open it.
(2) Create or Edit a userChrome.css file by adding your style rule.
''Note: spelling and capitalization are crucial. If Windows does not display file extensions such as .css, .js, .doc, and so forth, change that setting as described in this article: [http://support.microsoft.com/kb/865219].''
* Check for a userChrome.css file in the chrome folder.
** If it exists: open it in a text editor. Check that it has this first line: @namespace url(http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul); Then paste in the new style rule (not duplicating the above line).  
** If it does not exist: create a new text file named userChrome.css. (In Windows, right-click and choose New > Text Document and change the name to userChrome.css, making sure the file type ends up being CSS file and not Text Document.) Then see the previous step for what to place in the file.
The rule change should take effect the next time you start Firefox.
Note: I find it easier to use the Stylish extension, but if you don't want yet another extension, then userChrome.css makes the most sense.

How to create a Script in AW server

Hi all,
Can anybody pla help me with how to create a simpal script in AW server.
Thanks
Ravi Sharma

These products are all based on the GeoTel acquisition.
GeoTel ICR (Intelligent CallRouter) was the base product, enabling many different peripherals (i.e. PBXs like Lucent, Nortel, Rockwell etc. - and IVRs like InterVoice, Periphonics etc.) to be joined together in a functional contact center, although the initial implementation of ICR was in a different context - as a network router for service providers (AT&T, MCI, Optus, BT) through an interface called a NIC.
The NAM was a high-end conglomeration of a Network ICR (NICR) and 1 or more Customer ICR (CICR) suitable for service providers, allowing a hosted solution to be built.
When Cisco bought GeoTel the name was changed to Intelligent Call Manager (ICM) to avoid marketplace confusion with Cisco's existing line of routers. Thus the NAM (the hosted solution) now consisted of a NICM and several CICMs.
Since Cisco had developed their own switch/PBX for VoIP (after the Selsius acquisition) called CallManager, it could also be treated as a peripheral and slotted into an ICM. This became IPCC - IP Contact Center.
A couple of years ago, Cisco branding brought all products under a "Unified" umbrella.
Although the lines are a bit blurry (and I'll probably get corrected on this ), UCCE is IPCC (well, almost), ICM Hosted is the NAM, and the term ICM is mainly used when UCCE is implemented with non-Cisco switches (i.e. not CallManager).
Yeah, it's not that clear cut, but you get used to it.
Regards,
Geoff

How to create plugin modules ?

I have a swing gui with a textfield and textarea in a frame. Some command is entered into the textfield and a method within the frame's source code would be called to match the command to a set of if else loop to see if the command is correct before executing. It's some sort like creating a command prompt. The textarea displays the input and the results. How should I create some sort of codes with so that I can extend the commands inside with more commands by adding new jar file plugins and how do I create some sort of a jar file plugin ?

I looked through Spring web page and most of the stuff talks about web apps. I am not very familiar with these IoC although I tried to read and understand it.
I was wondering, if you have a GUI application with a task bar that allows you to plugin(jar file), and when you added the plugin, how does the application detects your plugin and updates the tool bar with the icon you specified in your tool bar. One thing i don't really understand is when you hit the updated new button on the tool bar, how does it call the method with the jar file plugin ? I know that every button in the tool bar, like all buttons, need an action event or something like that with the method inside it to actually call it.
I have been wondering how applications with plugin modules , like NetBeans and Eclipse, could dynamically add a button into their tool bar and menu bar and when called, they can 'link to' the plugin to call it ?

How to create a script-?

Guys I need help. I have been dreaming of becoming a contact center express specialist for a while now. But each time I go online to find out about books and study material I get a lot of discouragement. After my ccna, most of my studies have been self-study but I can’t seem to find a Cisco self-study book for contact center.
I think my greatest concern is related to creating scripts. This is my greatest fear and problem. Whiles I was studying unity I did try to understand scripting but I ended up being able to apply scripts that were already prepared by Cisco. I need to learn how to build a script from ground up. Most importantly, I need to understand how to understand some of the characters and expressions used in scripting.
Refer me to books, websites, papers etc. any information is great. I am really ready to go anywhere and everywhere. However, I’m a bit short of cash.
Thanks

The most important thing to understand about CCX is that the scripts are Java. Sure there is a GUI that abstracts a lot of this from you; however, it is still an IDE and you are writing Java code. The prebuilt Java beans [steps] can only take you so far. I find myself adding raw Java code into my scripts more often than not to make them do what I want. If you are not a programmer already, you will struggle to flourish with CCX scripting. You would do yourself a huge favor by taking a few semesters of programming classes at your local community college first.
As for study materials: There are no published books at present that walk you through CCX soup-to-nuts. Your only options are the Cisco Learning courses UCCXD and UCCXA or the product documentation. The documentation is great for those who understand the product but it can be a little bit of challange to get your head around the product based solely on the documentation.
My suggestion is to start with the getting started guide, release notes and SRND document. The UCCXD and UCCXA classes are really great, especially if you have a good instructor who knows the product. If you can get your employer to pay for them, they are the way to go.
Lastly, there are a few scripts available publically that you can use as a reference in the Cisco Contact Center Express Script Repository.

How to create a script to Trim a file ?

i simply need to create a script which trims mp3´s to 30 sec..
my script works on a single file but not on multiple files,
Not all files saved, have a length of 30 seconds...
i think this is something to do with the scale and the Selected part ... or not??
my script
Collection: Trim30
Title: trim1
Description:
Mode: 2
Undo: 1
Selected: none at 0 scaled 12614400 SR 44100
Freq: Off
cmd: Channel Both
Selected: 3969000 to 5291999 scaled 12614400 SR 44100
Freq: Off
cmd: Trim

Two things - you can only run a script to work on a lot of files as a batch process - the scripting language doesn't deal with explicit file references at all, unless they are noise profile ones, and then only with one per script.
The second thing is more important though - your script won't do what you think it will with any other files anyway, because you've used relative commands. This means that if you have a different length file, you won't select 30 seconds. If you want to know what to do to correct this, you need to look at this AudioMasters thread, which will show you how to fix this.

How do create a script that chooses a random swatch?

My idea is...instead of using math to create a random rgb number I want to choose specific color by hex or rgb and assign them a number 1-10 then use random() to choose a random number between 1-10 to choose one of those colors and place as foreground color. I just don't know javascript enough to create this script. Thank you

Does this help?
// 2014, use it at your own risk;
#target photoshop-70.032
// set up colors;
var theArray = [
[0,0,0],
[255,0,0],
[0,255,0],
[0,0,255],
[255,255,255],
// select color;
var thisColor = theArray[Math.floor(Math.random()*(theArray.length))];
// make forground color;
var theColor = new SolidColor();
theColor.rgb.red = thisColor[0];
theColor.rgb.green = thisColor[1];
theColor.rgb.blue = thisColor[2];
app.foregroundColor = theColor;

How to create a script for DB Startup

Hi to all,
I need to create a script for DB Startup with this command:
sqlplus /nolog
conn sys/mypwd as sysdba;
startup;
exit
It is possible ?
At now, when I run Sqlplus /nolog I see only the prompt sql>.
I Hope in Your help.
Best Regards
Gaetano

Hi,
Assuming you are on Windows environment. You may use the following two scripts to startup the database.
startup.bat
========
net start OracleServiceYOUR_INSTANCE_NAME
set oracle_sid=YOUR_INSTANCE_NAME
D:\oracle\product\10.2.0\db_1\bin\sqlplus /nolog @C:\DBA\startDB.sql
net start OracleOraDb10g_home1TNSListener
pause
startDB.sql
=========
connect sys/your_password as sysdba
startup pfile=D:\ORACLE\ORADBA\pfile\init.ora
exit
Similarly, you may write your own shutdown script.

How to create test scripts

Hi,
I'd like to know whether someone can advise me some white paper or documentation regarding tips about how to create unit testing procedures.
Thanks!

I know only one Unit testing frame work for PL/SQL, not sure whether it is useful to you or not
http://utplsql.oracledeveloper.nl/

How to create OMPplus script with parameters

Hi all. I am trying to parameterize my OMB scripts. For now I am only able to pass one type of parameter, For example in the script below I can parameterize the mapping name. So even If I pass 3 mapping names I will import MDX files and deploy for all 3 mappings.
I want to improve this and I want to pass other parameters such as passwords and schema names also. How would I be able to do that? How can I pass different type of parameters such as schema name, password and mapping name and reference to them separately from the script?
set MAPLIST $argv
OMBCONOMBCONNECT DWPROD/DWPROD@cakir:1521:orcl USE REPOSITORY 'OWBDB_SYS'OMBCC 'MY_PROJECT'
OMBCONNECT CONTROL_CENTER
OMBCOMMIT
foreach mapName $MAPLIST {
OMBIMPORT MDL_FILE 'C:/tfsroot2/Interfaces and Extracts/branches/Interfaces and Extracts1.1/000 - OWB Prototype/deploy/ora.stg/mappings/$mapName.mdx' USE UPDATE_MODE MATCH_BY NAMES OUTPUT LOG TO 'C:/tfsroot2/Interfaces and Extracts/branches/Interfaces and Extracts1.1/000 - OWB Prototype/deploy/ora.stg/mappings/$mapName.log'
OMBCOMMIT
OMBALTER LOCATION 'XTRCT_DWEXTRACT_LOC' SET PROPERTIES (PASSWORD) VALUES ('PASSWORD')
OMBALTER ORACLE_MODULE 'XTRCT_DWEXTRACT' ADD REFERENCE LOCATION 'XTRCT_DWEXTRACT_LOC' SET AS DEFAULT
OMBALTER ORACLE_MODULE 'XTRCT_DWEXTRACT' SET PROPERTIES (DB_LOCATION) VALUES ('XTRCT_DWEXTRACT_LOC')
OMBCOMMIT
OMBALTER LOCATION 'XTRCT_DWPROD_LOC' SET PROPERTIES (PASSWORD) VALUES ('PASSWORD')
OMBALTER ORACLE_MODULE 'XTRCT_DWPROD' ADD REFERENCE LOCATION 'XTRCT_DWPROD_LOC' SET AS DEFAULT
OMBALTER ORACLE_MODULE 'XTRCT_DWPROD' SET PROPERTIES (DB_LOCATION) VALUES ('XTRCT_DWPROD_LOC')
OMBCOMMIT
OMBREGISTER LOCATION 'XTRCT_DWEXTRACT_LOC'
OMBCOMMIT
OMBREGISTER LOCATION 'XTRCT_DWPROD_LOC'
OMBCOMMIT
OMBREGISTER LOCATION 'DWEXTRACT_INPUT'
OMBCOMMIT
OMBREGISTER LOCATION 'DWEXTRACT_OUTPUT'
OMBCOMMIT
OMBCC 'XTRCT_DWEXTRACT'
foreach mapName $MAPLIST {
OMBCREATE TRANSIENT DEPLOYMENT_ACTION_PLAN '$mapName' ADD ACTION 'MAPPING_DEPLOY' SET PROPERTIES (OPERATION) VALUES ('CREATE') SET REFERENCE MAPPING '$mapName'
OMBDEPLOY DEPLOYMENT_ACTION_PLAN '$mapName'
OMBDROP DEPLOYMENT_ACTION_PLAN '$mapName'
OMBCOMMIT
puts "Mapping $mapName deployed"
OMBDISCONNECT

Maybe you can try putting this variable list of parameters in a text file and read the text file. You pass the path/name of the text file as a variable:
proc read_file { p_file } {
# Validate file exists
if { [ file exists $p_file ] } {
puts "File: $p_file exists"
} else {
puts "ERROR, not exists: $p_file"
return 1
# open file to read
set v_openfile [ open "$p_file" ]
set data_file [ read -nonewline $v_openfile ]
close $v_openfile
# read each line in file
set v_list_line [ split $data_file \n ]
foreach v_line $v_list_line {
Regards
ANA GH

How To Create Plugin/Script

Similar Messages

Maybe you are looking for