How to create process chain for this data flow

Hi experts,
My data flow is:
======================================
2lis_11_vahdr->Transfer rules->2lis_11_vahdr->Update rules->DSO1->Transformation->DTP->Cube1.
2lis_11_vaitm->Transfer rules->2lis_11_vaitm->Update rules->DSO1->Transformation->DTP->Cube1.
======================================
2lis_12_vchdr->Transfer rules->2lis_12_vchdr->Update rules->DSO2->Transformation->DTP->Cube1.
2lis_12_vcitm->Transfer rules->2lis_12_vcitm->Update rules->DSO2->Transformation->DTP->Cube1.
======================================
2lis_13_vdhdr->Transfer rules->2lis_13_vdhdr->Update rules->DSO3->Transformation->DTP->Cube1.
2lis_13_vditm->Transfer rules->2lis_13_vditm->Update rules->DSO3->Transformation->DTP->Cube1.
======================================
Here for each datasource info package brings data upto dso and then from dso dtp fetches the data.
For deltas i want to keep this data flow in process chain.
Anyone please guide me how to keep this in a process chain.
Full points will be assigned.
Regards,
Bhadri m.
Edited by: Bhadri M on Sep 2, 2008 7:20 PM
Edited by: Bhadri M on Sep 2, 2008 7:21 PM

Hello,
Sure it is possible to maintain that dataflow.
Start here:
This is a very good document about process chains:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/8da0cd90-0201-0010-2d9a-abab69f10045
Let me know if you have any doubts.
Regards,
Jorge Diogo

Similar Messages

How to create process chains for Master Data?

I need information on " how we can create process Chains for Master Data"

Hi Sachin,
http://help.sap.com/saphelp_bw33/helpdata/en/ad/6b023b6069d22ee10000000a11402f/frameset.htm
and also Modelling aspects in process chains (ppt)
https://websmp109.sap-ag.de/~sapidb/011000358700002337702003
Hope this helps.
Srini

How to create Process chain for Aggregate for Master data

Hello friends,
I created Aggregates on Navigational Attributes.
Now they are working fine, but i need to know that how shall i create the Roll up for Aggregates on Navigational Attributes.
The point is the master data changes frequently a lot of time for e.g. for 0customer etc.....
So if any one can send me the step by step documents so as to know how to roll up the Aggregates for Navigation attributes or for aggregates created on Master data....
How to create process chains for the same ?????????
Because if master data changes, then rolling up the aggregates straight forward will not help.
So we need to write a process chain so that it deactivates the aggregate and reactivate again and fill up again..........
If i mis interpreted something please rectify it.......
Please advise

Hello,
the changerun that you have to schedule in order to activate the master data will adjust the aggregates automatically. There is no need to deactivate them after master data loads.
Best regards,
Ralf

How to create process chain for 0EMPLOYEE

I want to create process chain for 0EMPLOYEE attribution and text, how to create it and make a schedule for daily loading? Could anyone write steps in my case? Thanks!

Hi,
Follow the following steps:
1. Go to RSPC->create->give name and disc of your chain.
Start Variant Creation
2. Now you will be prompted to give a start variant,create a new variant(click on page icon )
3.Change Selections->date/ time.
4.give date and time for start of the chain.
5.click the check box for periodic job->period values->daily->save->save
Addition of process types
6.Select the process type "Execute Infopackage"
7.select the name of the infopackage which loads attr data to 0EMPLOYEE.
8.Attribute Change run will come automatically( if not then drag it as well and create variant )
9.select the name of the infopackage which loads text data to 0EMPLOYEE.
10.Attribute change run wil again follow.
(connect the process types which are not connected,by right clicking the process types )
                             start
                       IP A     IP T
                      attr          attr
A = attribute
T = Text
Please Reward points if useful
Manish

How to Create Process Chain for Remote Cube.

Hi,
I created Remote info cube, data from ECC, loaded Successfully, I want to create Process Chain for Reomte Cube, Please Help me.
Thanks,
Nandish Gowda

Hi Nandish,
After initialization, th next delta will come as per your delta nature, if it is 0calday: Then your next delta will come tomorrow only.
If you are able to 7 records in RSA3, why not in PSA( Why it's only 5 records). Analyze this closely.
Sometimes, RSA3 exactly doesn't match with PSA because, RSA3 works on update mode F.
Regards,
Suman

HOW TO CREATE PROCESS CHAIN FOR PSA ARCHIVING

SDN EXPERTS,
i like to create process chain for archiving. but i dont see any event for archiving when i go to create a process chain for PSA archiving. please let me know.
thanks

Hi,
In the below document on the 14th page it says it is not possible to archive the master data & PSA.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f47fec9f-0501-0010-ce84-8a7231715ae6
As per my understanding..
But one thing you can do is use another ODS and load the same data that you're loading to something else and try to archive that data(Only if you have transformations in the current CUBE/ODS).
Correct me if i was wrong and eloborate your requirement.
Regards, Siva

Problem in creating process chains for CO

Hi Friends,
                 I have a CO cube "0OPA_C11" getting data from Three datasources,
those are 0CO_OM_OPA_6(supports delta), 0CO_OM_OPA_1(full only), 0CO_OM_OPA_2(full only), i have already created process chain to this cube using these three datasources, the chain is like this,
1. delete indexes
2.0CO_OM_OPA_6(supports delta
3.0CO_OM_OPA_1(full only),
4.0CO_OM_OPA_1(request overlapping)
5.0CO_OM_OPA_2(full only),
6.0CO_OM_OPA_2(request overlapping)
7.create indexes
        Is it right? here the chain is running, after completion of that, in manage of cube, it is showing only the request for 0CO_OM_OPA_2(full only), the request which were there earlier like Init request and new delta request for .0CO_OM_OPA_6, full request for 0CO_OM_OPA_1 are getting deleted, it is showing the request only for 0CO_OM_OPA_2,
the way how i created the process chain is right or wrong? can anybody give me the solution?
Thanx in Advance
BalajiReddy

Hi Nick,
          Thanx for your reply, everthing is ok what you've asked me to check, i think there is certain scenario to create the process chains for the data targets, which are getting data from multiple datasources, which support delta's as well as full.
          I want that scenario, can you tell me? or can anybody tell me?
The right points are assigned to the right answers.
Thanx in advance
balajireddy

How to create process chains,and how to use process like and or xor

Hi,
How to create process chains,and how to use process like and or xor.
can any one please give me a example in each.
Thanks,
cheta.

Hi Cheta,
Here is step by step procedure to create process chains
Process chain is nothing but executing a process ..(or) loading the data any process we can do in background.. that means.. automatically we can execute our process based on Time or any event..
Creating Process Chains
Prerequisites
If you want to include a load process in the process chain, you need to have already created an InfoPackage.
You cannot load flat file data from a client workstation in the background. For this reason, you have stored your data on an application server.
Creating Process Chains
You have the option of creating a process chain in the process chain maintenance screen directly or by using a maintenance dialog for a process:
Creating a Process Chain Directly in the Process Chain Maintenance Screen
You are in the BW Administrator Workbench.
1. Click on the Process Chain Maintenance icon in the AWB toolbar.
The Process Chain Selection dialog window appears.
2. Choose Create.
3. Enter the technical name and a description of the chain, and confirm your entry.
The Add Start Process dialog window appears.
4. Create a variant for a start process.
1. a. On the Maintain Start Process screen, choose whether you want to schedule the chain directly or whether you want to start it using a metachain.
2. b. If you choose to schedule the chain directly, enter the start date value for the chain under Change Selections and save your entries.
The Maintain Start Process screen appears again.
3. c. Save your entries, return to the previous screen and confirm your entries in the Add Start Process dialog window.
You are taken to the Plan View of the process chain maintenance screen.
In the left-hand area of the screen, a navigation area is displayed. In the right-hand area of the screen, the process chain is displayed.
5. Use the drag-and-drop function to add the relevant processes into your process chain.
You use the Process Types function to select the processes. This sorts the process types according to different categories. You can also call up InfoPackages and processes for the data target from the separate InfoSources and Data Targets navigation trees.
Hope this helps
Regards
Karthik

Creating Process Chains for Infocube

Hi All,
I am trying to create a process chain for Vendor Evaluation(0PUR_C05).I created a start process and the "execute infopack" wich is delta load,so it prompted for "insert delete index" wich i created.Now,what to do next???
the data flow is like this..
infoapck(delta)->psa->infosource->infocube...
is giving the selete index and rebuilding it mandatory??
Please throw a light on this and help me out...
Points will be rewarded..
Regards,
Manjari.

Hi Manjari,
How to do INIT?
Go to Process Chain for Transaction Data.. and go to infopack you want to do INIT.
Right click on that variant and click "Maintain Variant".
Now if you have not yet loaded the cube using this Infopackage, you will find option Full update and Initialize data transfer in Update tab. If you have not loaded cube with any update, go to Initialize Data transfer and select the datatarget you want in Data Targets tab and check "Start immediately" in Scheduler tab and Execute.
Now go to monitor screen and refresh it in times.
Keep on monitoring in that screen until the requests become "Green".
Once the requests are Green, come back to the Cube in RSA1 and check the data in Manage screen whether the data is populated fine or not.
If the data is populated well, now go to Infopackage and in Update tab, change the Update technique to Delta. From now, you can have Delta upload using process chain.
You will come to know whether the process chain is working properly or not by executing the process chain once. In your case, run the process chain only after you are done with INIT.
If you have already loaded cube with Full load, follow the below process for INIT load...
Go to Process Chain for Transaction Data.. and go to infopack and right click it. Click on Maintain Variant.
InOrder to make it in INITIALISE DATA TRANSFERgoto... Menu>Scheduler>INITIALISATION OPTIONS FOR SOURCE SYSTEM..and click on it.
You will get a popup with some requests in it. Select the requests and make them RED and delete all the requests and enter.
And if u check in Update tab ,,for the update mode..it will be seen in INITIALISE DATA TRANSFER mode.
Then move to DATA TARGETS tab and check the data target to which you want to load data.
NOTE: If there is any data in the Cube, you want to do INIT, delete the data first (delete requests in Data target) and start INIT.
Now move to "schedule" tab in Infopackage and check if the radio button is on START DATA LOAD IMMEDIATELY and click on the START button.
Assign points if this helps u...
Regards,
KK.

How to create process chain ?

hi all,
will you please simlify how to create process chain if anybody has a screen shot or slide show about pc creation it will definatly help me a lot.
rewrd point for sure,

This may help:
[http://help.sap.com/saphelp_nw04s/helpdata/en/67/13843b74f7be0fe10000000a114084/content.htm]
[https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/8da0cd90-0201-0010-2d9a-abab69f10045]
Regards,
Jordi

Process chains for loading data to target is not functioning

Hi SAPians,
Recently, we have upgraded the firmware on IBM P590 with the help of IBM on Saturday i.e. 06/12/2008 (The firmware of P5-590 was SF235_209. It was upgraded to SF240_XXX) and since then the process chains for loading data to targets are not functioning properly. We have stopped all the SAP services, database services & OS services from our end and services have been rebooted after firmware upgrade.
However, the problem with the process chains that load transaction data and hierarchies is solved but the chains that load master data are still not working as scheduled.
We tried to load the master data manually, by running DTP to load data to an object analysis code (attributes) the request remained YELLOW. After refreshing it several times, the request turned into RED. The error message was - PROCESSING TERMINATED (screenshot 1 attached).
To mitigate this we tried deleting the bad request and it prompted with the below message:
"Cannot lock request DTPR_4C37TCZGDUDX1PXL38LVD9CLJ of table ZANLYSIS for deletion (Message no. RSMPC178)" (screenshot 2 attached)
Please advise us how the bad request should be deleted?
Regards,
Soujanya

Hi Sowjanya,
Follow the below procedure to make yellow request to RED:
Use SE37, to execute the function module RSBM_GUI_CHANGE_USTATE
From the next screen, for I_REQUID enter that request ID and execute.
From the next screen, select 'Status Erroneous' radiobutton and continue.
This Function Module, change the status of request from Green / Yellow to RED.
Once it is RED, you can manually delete that request...
Releasing LocK
Gott Transaction Code SM12 and release the lock.
Hope It helps you.
Regardss,
Nagaraju.V

Process has no predecessor while creating process chains for Inventory

Hi Experts,
I have created process chain for Inventory and this inventory cube have compression also.so, i included compression of the infocube after create index.
Here while i am checking the chain ,am getting the error called : PROCESS HAS NO PREDECESSOR.
Please give some inputs,what does it mean and how to solve.
Thanks
Lakshmi

Hi Murali,
Thanks for your reply.
You mean to say that i should not include BX-IP,DTP in the list.as we know that this is only one time job.
But in prodn system with out including BX in the list,how to initialise for the first time.
So,first time we need to manually run the IP,DTP in prodn system.
Plz let me know.
Note:Murali, In the process chains list after create index,i dragged "COMPRESSION OF THE INFOCUBE" and i specified 0IC_C03 CUBE and continued.
Along with compression of the infocube there is one more box has come into picture i.e SIGMA ADJUST(GENERATED FROM COMPRESSION ZPC_INV_0IC_C03_COMPRESSION) like that its came.
Do we need to remove that or should i keep it in the list.
Thanks
LaxmanNaidu

How to create a hirarchy for this characteristic having lengh 50?

Hi guru's
I have a scenario like characteristic is having lengh 50.Now I want to create a hierarchy for this characteristic.
But Hirarchy allows maximum lengh 32chrs only.
So could you please let me know how to create a hirarchy for this characteristic having lengh 50?
Thanks in advance
Sivanand

Isn't this the same question as here:
Hi all, Have a problem, Please let me know urgently.
Why the duplicate postings with different names??

How to create Process chain in BI 7.0

hi,
I dont know how to create process chain in BI 7. If any one have document step by step process to create process chain. help me. thank u.

check these links..
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/00a1f389-ec7c-2c10-04bc-9d81b3084171
http://wiki.sdn.sap.com/wiki/display/BI/Processchainscreationandmonitoring
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/900be605-7b59-2b10-c6a8-c4f7b2d98bae
http://wiki.sdn.sap.com/wiki/display/BI/FiveWaystoEnhanceBIFunctionalityUsingABAP--PartV--ABAPinProcess+Chain

How to create process variant for delete index in a process chain

Respected all
I am creating a process chain, but unable to create process variant for the delete index. kindly tell me the
step by step proceure for creating the variant for delete index. also if we use variant which is previously prepared then will it be safe? will it affect the other running process chian.
pls reply
thanks
abhay

Hi,
Please do not use an already created variant for index deletion. It might delete indices of some other cube.
You can follow the following steps -
1. Open the chain in Edit mode and click on "Process Types" button
2. On the Left hand side you will have various process types. Choose "Data Target Administration" and expand it.
3. Choose the first process "Delete Index" (it will be marked with a trash bin sign) and drag it to your chain
4. It will ask you create a variant. Press the create Button
5. In new window enter the Process Variant technical name and description
6. Then in new window choose Object Type = Cube through dropdown and Object name via browsing. After choosing the cube name click on "Transfer Selections"
7. Save and return to your chain
8. It will automatically generate a create index step also after delete index.
9. You need to break the link between create and delete step and insert infopackage in between to get the following steps - delete index --> load cube --> create index.
Please let me know if this is helpful..
Regards
nishant

How to create process chain for this data flow

Similar Messages

Maybe you are looking for