How to create professional image of multiple screenshots

I have Adobe Photoshop CS5.
I want to create one image of 3 screenshots of web pages with transformed perspective so they can all three fit into a small rectangle and throw proper shadows in relation to eachother. I have seen very profeessional samples of something like this, but no matter how hard I try I cannot seem to acheive a really polished professional look. For example, once I use the transform tool to alter their perspective it seems the edges loose their streightness (a little bit of fuzz is now part of the edge), which takes away from the polished professional look of the image. Also there must be a proper way to have the three layers throw their shadows to each other so as to be near picture perfect?
I am asking the experts on this forum if they can point me to some guide on how to accomplish this with professional look.
I would upload a sample of what I am trying to accomplish but the file upload is disabled for this site - hope the alternate explanation above is enough.
Thanks,
Jay

There's always more than one way to do things, but here's how I'd do it:
Basically, you'll want to paste your multiple screens into a single document as separate layers. Make your Layers palette visible; you're going to need to select different layers to do things to them. Layers nearer the top of the stack show "in front" of layers below.
You might want to expand the canvas to give you room around the windows.
Use the Transform tool to give the screens perspective, and move them around with the move tool..
Create a backdrop with a couple of runs of the gradient tool with rectangular selection.
Create some new layers in between the screens to make shadows. You can use a selection made with the Polygonal lasso tool to create straight-edged selections to limit where you paint into the shadows layer, and a big brush with partial Opacity or Flow to make the shadow partially transparent.
Your layers will look something like this:
Here's a .psd file you can load to see how the above is put together:
http://images.prodigitalsoftware.com/MultipleScreens.zip
-Noel

Similar Messages

How to create one TO for multiple TRs

Dear All,
how to create one TO for multiple TRs, kindly suggest me
Regards,
balu

As for your question: it is discussed in sAP online help:
http://help.sap.com/saphelp_erp60_sp/helpdata/en/c6/f841f24afa11d182b90000e829fbfe/frameset.htm
Sorry I misunderstood your question.
The above mentioned solution won't create one single TO from multiple TR.
Edited by: Csaba Szommer on Aug 11, 2010 9:46 AM

How to create transparent image at run-time?

How to create transparent image at run-time? I mean I want to create a (new) transparent image1, then show other (loaded) transparent image2 to image1, then show image1 to a DC. The problem is - image1 has non-transparent background...

i'm not sure, but you can set the alpha value to 0 in all pixels which are 'in' the background..
greetz
chris

I need your expert opinion on how to create a map with multiple conditions.

Hello.
I need your expert opinion on how to create a map with multiple conditions.
I have a procedure (which i cannot import or re-create in OWB due to the bug), so i am trying to create a map instead :-(
How can i create a cursors within the map?
My function creates table and cursor.
Then it will have to check for duplicates in the tables (the one created and another table) - the criteria for finding duplicates is a number of fields.I then need to place few different conditions (if some attributes are not available) and it has to load cursor based on this conditions. The next step is to fetch the data into the cursor based on what attributes are missing.
The next thing it will do is insert the data into table (if record doesn't exist), output the error in separate table is record is corrupted, or update the record with changed information.
In short i need to re-create match / merge but with conditions, iterations etc 'built into' it.
I can read up on available functions - it's just what would be the best options? and what would be the best approach to do so?
In my function i use %rowtype - but cannot use it in owb - so what would be the alternative? i don't really want to create a lot of variables and then have a nightmare of maintaing it. are there any tips regarding this?
having looked through Oracle dedupe - it's not really what i need because it is just DISTINCT.
I would appreciate any help / advise on this.
Thank you very much

thanks a lot for your reply - i will look into this option :-)
it is a bit more complicated now as i have to re-create the match / merge and then somehow 'tweak' it to achieve the result i need.
At the moment i am looking to breakdown the package into smaller chunks 'functions' and try creating the map that way.
Anyway, thank you very much for your suggestion.

How to create report image like artwork demo

Dear Pakars
How to create report image like artwork demo ?
Thanks
Imansyah

Hello,
Are you asking how to include images in a report? If so, take a look at the declarative blob support documentation -
http://www.oracle.com/technology/obe/apex/apex31nf/apex31blob.htm
Hope this helps,
John.
Blog: http://jes.blogs.shellprompt.net
Work: http://www.apex-evangelists.com
Author of Pro Application Express: http://tinyurl.com/3gu7cd
REWARDS: Please remember to mark helpful or correct posts on the forum, not just for my answers but for everyone!

How to create a link to multiple links in pdf file

how to create a link to multiple links or a button to multiple links in pdf file. this links is goto diferent pages, no web. sorry for my english.

You can print to PDF from the Print Module .
Do you have Adobe Acrobat?
Otherwise install (free) Bullzip Free PDF printer.
http://www.bullzip.com/

How to create Edit Image in my form

hi All,
I have a form with header and detail, in my detail block i need to add Edit Image in my form. When i click on this i should be able to open one of my text column.
can any one please help me how to create new images....

Siva,
There is a different Technology Stack associated with the Enterprise Business Suite (EBS). amitphynyl is correct with the description of how to create a button with the edit.ico assigned to it, but with the EBS, you will want to speak to your DBA to get a list of all the Icons that are available as you will have more icons with the EBS than are available with a standard install of Forms Builder 6i. I would also suggest you ask your DBA to give you a copy of all the Icons so you can add them to your Forms Builder installation so they will be available to you during design of your Form.
I would also recommend that you review the Oracle Applications User Interface Standards for Forms-Based Products guide in the Oracle Applications Documentation web site to ensure your Custom Form conforms to Oracle guidelines.
Hope this helps,
Craig B-)
If someone's response is helpful or correct, please mark it accordingly.

How to create an image in an applikation

very very very very simple question:
how to create an image in an applikation!?thanks in advance!

Image image=createImage(width,height)check out the IMAGE class in the API. as you said, this is simple stuff, thus you should be able to easily find the answer.

How to create an invoice from multiple sales doc.

Hi,
how to create an invoice from multiple sales doc.
thanx,
sourav

hello, friend.
assuming that your settings in VTFA and VTFL allow, you can create 1 invoice for many sales orders or deliveries by using VF04. choose all documents that apply and click "collective billing document".
you can also click on "simulation" if you want to test if the combination is possible and the system will give you a split analysis if this is not possible.
regards.

How to create an image viewer

i need to know how to create an image viewer would appreciate
help thanks

you can use loadMovie() to load a jpg image into flash (and
if you're using flash 8 you can load other image formats into
flash) and use it to create an image viewer.

How does create a server with multiple Clients ?

Any people can lead me .
How does create a server with multiple Clients ?
Thanks

For a multithreaded server you will need a thread to listen and at least one thread per client. If the conversation is half duplex, one thread per client works very well, if it's full duplex you will find one thread to send and one to receive much easier to program.
I posted a Simple Socket Server that uses 1+2*clients threads.

How to create an Image that is available to multiple locations?

I can create an image from a virtual machine, but this image is only available to the location where the virtual machine was originally created (for example East US).
I want to create a single image that is available to multiple locations (East US, North Europe, Southeast Asia, etc...)
Is this possible? I've noticed that stock images are available to multiple locations, can user images be configured in the same way?
Thanks

hi,
As far as I know, it is not supported currently. But you could use a compromise method. You could copy the Image into other regions storage account. Then you could create the VM using yourself Image. But you may be charged the outbound data. I recommend
you could refer to this thread (http://social.msdn.microsoft.com/Forums/en-US/04956637-45c5-40c9-9422-5b1c4de681bf/how-to-move-virtual-machine-to-a-different-region?forum=WAVirtualMachinesforWindows
Hope it helps.
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

[ADF Help] How to create a view for multiple tables

Hi,
I am using Jdeveloper 11G and ADF framework, and trying to create a view to update multiple tables.
ex:
Table A has these fields: ID, Name
Table B has these fields: ID, Address
A.ID and B.ID are primary keys.
B.ID has FK relationship with A.ID
(basically, these tables have one-to-one relation)
I want to create a view object, which contains these fields: B.ID (or A.ID), A.Name, B.Address.
So I can execute C,R,U,D for both tables.
I create these tables in DB, and create entity objects for these tables.
So there are 2 entity objects and 1 association.
Then I create a view object based on B and add fields of A into the view:
If the association is not a "Composition Association",
when I run the model ("Oracle Business Component Browser") and try to insert new data, fields of A can't edit.
If the association is a "Composition Association", and click the insert button, I will get
"oracle.jbo.InvalidOwnerException: JBO-25030: Failed to find or invalidate owning entity"
If I create a view object based on A and add filed of B into the view:
When I run the model and try to insert new data, fields of B can't edit, no matter the association is or is not a composition association.
So... how can I create a view for multiple tables correctly?
Thanks for any advices!
Here are some pictures about my problem, if there is any unclear point, please let me know.
http://leonjava.blogspot.com/2009_10_01_archive.html
(A is Prod, B is CpuSocket)
Edited by: user8093176 on Oct 25, 2009 12:29 AM

Hi Branislav,
Thanks, but the result is same ....
In the step 2 of creating view object, I can select entity objects to be added in to the view.
If I select A first, and then select B (the "Source Usage" of B is A), then finishing the wizards.
When I try to create a new record in the view, I can't edit any properties of B (those files are disabled).
If I select B first, and then select A in crating view object, the result is similar ...
Thanks for any further suggestion.
Leon

How to create list items with multiple attachment files using rest api javascript

In one of user form I am using javascript rest api to create a list item with multiple attachment files. So far I am able to create list item and once created uploading an attachment file. But this is two step process first create an item and then upload
a file.
It create an additional version of the item which is not desired. Also I am not able find a way to attach multiple files in a go. Following is the code I am using.
createitem.executeAsync({
url: "/_api/web/lists/GetByTitle('UserForm')/items(1)/AttachmentFiles/add(FileName='" + aFile.name + "')",
method: "POST",
contentType: "application/json;odata=verbose",
headers: {
"Accept": "application/json;odata=verbose",
"X-RequestDigest": $("#__REQUESTDIGEST").val()
binaryStringRequestBody: true,
body: fileContent,
success: fnsuccess,
error: fnerror
So somehow I need to combine item attributes along with attachment files in body: param. I visited https://msdn.microsoft.com/en-us/library/office/dn531433.aspx#bk_ListItem but no success.
Appreciate any help.

Thanks Mahesh for the reply and post you share it was useful.
But this does not solve the core of the issue. You are uploading attachments after creation of item and multiple files are being attached in loop. This is kind of iterative update to an existing item with attachments. This will end up creating multiple versions.
What I am trying to achieve is to create an item along with multiple attachments in a go. No item updates further to attach a file.
Please suggest how this can be done in one go. SharePoint does it when one creates an item with multiple attachment.
Thanks for your reply.

How to create a table with multiple select on???

Hi all,
I am new to webdynpro and my requirement is to create a table with multiple selection on.I have to add abt 10 rows in the table but only 5 rows should be visible and moreover a verticalscroll should be available to view other rows.Can anybody explain me in detail how to do that.Please reply as if you are explaining to a newcomer.Reply ASAP as i have to do it today.
Thanxs

Hi,
1. Create a value node in your context name Table and set its cardinality to 0:n
2. Create 2 value attributes within the Table node name value1 and value2
3. Goto Outline view> Right click on TransparentUIContainer>Apply Template> Select Table>mark the node Table and it's attributes.
you have created a table and binded its value to context
Table UI properties
4.Set Selection Mode to Multi
5.Set Visible Row Count to 5
6.ScrollableColCount to 5
In your implemetaion, you can add values to table as follow:
IPrivate<viewname>.ITableElement ele = wdContext.nodeTable().createTableElement();
ele.setValue1(<value>);
ele.setValue2(<value>);
wdContext.nodeTable().addElement(ele);
The above code will allow you to add elements to your table node.
Regards,
Murtuza

How to create professional image of multiple screenshots

Similar Messages

Maybe you are looking for