How to create Profile Based Rule in Endeca Studio Developer
Hi,
Can anybody tell me how to create Profile based rule in the Endeca Studio Developer. and how to fecth the data in the JSP. what are the parameter required to pass in the ENEQuery
Thanks
Shailesh
I use visual studio 2012.
I dont see rule set editor which can help me create busineesss rule.
Where can I find it?
Hi Rajesh,
If you want to learn more information about RuleSet Editor in .net framework 4.5, check out https://msdn.microsoft.com/en-us/library/ee960221(v=vs.110).aspx
for more information.
Best regards,
Angie
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.
Similar Messages
-
How to create Formula based value field in COPA
Hi,
I want to know how to create formula based value field in COPA
My Requirement is i want to collect some value in formula based value field and want to use in copa allocation cycle as a tracing
factor.
anybody give some light on the same topic or requirement ?
Thanks
Nilesh RThe key figure you are creating in KE2K is not a value field, i.e. you can't post to it and you can't use it in a report. It is a caluculated value that can be used only in assessment and top-down-distribution.
In Ke2K, enter a name for your key figure, then click on the the white sheet button to create it. Now the formular area is open for input. Input your formular (e.g. VV001 + VV002 - VV003 .... where VVXXX are the technical names of value fields).
Now click the "check formuar"-button. Then save.
Before you can use the key figure in assessment, execute TC KEUG.
Now the key figure is available as any value field in the tracing factor selection of your assessment cycle.
I hope this made it clearer.
Regards
Nikolas -
How to create HeatMap based on Country Credit Rating?
How to create Heatmap based on Country Credit Rating i....
Credit Ratings are AAA, -AAA, +AA, AA, -AA, +A, A, -A, +BBB, BBB, -BBB, +BB....... From Green To Red
Country Credit Rating
Angola
BB-
Botswana
A-
Burkina Faso
B
Ethiopia
B-
Ghana
B
Morocco
BBB-
Nigeria
BB-
Sierra Leone
B-
South Africa
BBB
Tanzania
B
Zambia
B+
Australia
AAA
India
BBB-
Indonesia
BB+
Pakistan
B
Philippines
BBB
Thailand
BBB+
Uzbekistan
BBB
Turkey
BB+
Chile
AA-Thanks Jim for the solution.
Also, this article should be helpful for you:
Create a Heat Map Using Excel’s Conditional Formatting -
http://peltiertech.com/heat-map-excel-conditional-formatting/
(Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee
the accuracy of this information.
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.
Hi Ethan, If you trying to get points i understand but please do assume that googling is done first.
If you want to get help from others, you should first be polite to those who are trying to help you, rather than "i already new the option of converting to numbers" or "If you trying to get points i understand but please do assume
that googling is done first.".
You didn't make it clear in your initial post that what you already tried, or which articles you already reviewed, how should us people know this?
I'm sorry but here all is asked politely and please, politely do not change the subject. -
HOW TO CREATE PROMPT BASED ON ANOTHER PROMPT IN OBIEE
HOW TO CREATE PROMPT BASED ON ANOTHER PROMPT IN OBIEE.
Requiremenst is as follows.
Year ,Qtr columns in first prompt.Based on selection on these prompts second prompt should display corresponding prompts
Second prompt will have Month ,Week and Day columns.Second prompt should be hidden and based on first prompt selection second prompt should display with constraint based on first prompt.
Any help would be highly appriciated!!!hi,
Using Guided navigation it is possible,
Please refer the below links.
http://gerardnico.com/wiki/dat/obiee/dashboard_prompt_1_eq_0
http://businessdecisionsystems.com/blog/?p=448
Hope this help's
Thanks,
Satya -
How to create ajax based tabs ..??
Hi all,
How to create Ajax based Tabs (or Tab like) in a JSF page..?
Any clues..?
Thanks and regards,
JijoYou need to write your own jsf component for this.
-
Do you know How to Create Screen Layout Rules ?
Hi,
Do you know How to Create Screen Layout Rules ?
Best regards,Hi,
http://help.sap.com/saphelp_45b/helpdata/EN/ae/ea2c7dd435d1118b3f0060b03ca329/content.htm
Please also read the "Rules of the Engagement" before posting a query on this forum.
Regards,
Gaurav -
How to create an attribute dimension in Essbase Studio?
I cannot figure out how to create an attribute dimension using Essbase Studio. The online help states that I need to "Find the Attribute settings grouping in the center" of the member properties dialog box. I suspect that I'm having a problem figuring this out because I don't have the attribute dimension properly defined in the relational data source or in the mini-schema. I've tried creating a table with no key relationship to the other tables and with no logical joins defined, but that doesn't seem to help. Any ideas?
so in the 11.1.1 version you would click on the member name in the hierarchy you added to the Essbase model and in the center pane of the general tab should be the attributes settings section.
If I had a dimension called stores wth two groupings unser it region and store_type, I would click on store_type and add the attribute info -
How to create monitor based on the data collected by rule?
I have an application which comes with a built-in command: GetBackLogNm.exe. Running this command can get the current backlog number in the system.
Now I need to create a monitor which should trigger the alert if the backlog keeps increasing for 2 hours. I am thinking of creating a rule which run command GetBackLogNm.exe to get the number and save it into DW. Then create a monitor based on the collected
data. Is it the correct way? If so, can anyone give me a outline how to do so? An example would be much appreciated if possible.
Thanks!Hi Jonathan, thanks for the quick reply. But System.ConsolidatorCondition seems only available for SCOM 2012. I didn't find it in 2007 libraries.
However the idea your and Vladimir showed in this
post is really helping. I kind of solved the issue not using the exactly the components (since it is available in 2012 only) but following the same logic.
In general I did this:
1. create a script rule which execute the command to get backlog number; then save the log number in the DW and the registry.
2. just like System.Performance.DeltaValueCondition, when the second time the rule triggered by schedule, it will compare the current backlog number and the last known number stored in the registry. If the value is exceeding given threshold AND bigger than
the last known back log number, the rule increase an counter which is also stored in the registry
3. create an unit monitor to monitor the counter stored in the registry and will trigger the alert if the counter exceeding a given value.
This solved the issue. But I feel a little not comfortable to store data in the registry.
So one quick question which might be out of the this topic: what is a good way to store the data generated by one workflow and then share it with another workflow or reuse sometime later? In my case here, I used the registry key. Cook down is one option
to share data but it is very strict and can't solve the issue I have in this case.
Thanks again! -
Hello,
I have a Win7 PC. I want to block all incoming connections except 3 or 4 IPs. How can i do this?
I created a new rule to block all connections using this steps:
Inbound rules > New Rule > Custom > All Programs > All Protocols / Ports > All Local/Remote IPs > Block the connectiion > All profiles > Then i gave a name
This rule works fine and blocks all incoming connections.
Then i want to create a new rule to allow specific IPs using this steps:
Inbound rules > New Rule > Custom > All Programs > All Protocols / Ports > Remote IPs: 192.168.10.5, 192.168.10.10 > Allow the connection > All profiles > Then i gave a name
But 192.168.10.5 and 192.168.10.10 couldn't reach W7 machine.
(If rules are disabled or FW is off; both IPs could reach W7 machine)
ThanksHi,
How did you check these two IP address? Through remote access? According to your description, it should only allow remote IP could access this computer. Please also allow local IP for test.
Roger Lu
TechNet Community Support -
How to create profile for apple tv
How do i create profile file for Apple Tv?
it really comes down to what you mean by a pofile file
profile is often used for a custom setting for a user
a file is a storage unit located on a file system on a device
non of those things are a feature supported in the way you present it by the appletv -
How to create event based process chains
Hi All,
I would like to know about event based process chains. In connection to this, could you please answer the following queries,
1. How to create events
2. How to link created event to the process chain in the same BI or BW system and as well as from
externel BI system.
3. How link one process chain with other process chain (i.e, After completion of one process chain, it
should trigger other dependent process chain)
Thanks and Regards,
Kotesh.1). Doubt regarding first question.
For example, i would like to create time based event (it should be trigger daily at specified time),
where we have to maintain scheduling options while creating event.
When i checked SM62 there i found only two options a). Event name and b). Description.
Could please send any doucument link if you have.
Ans : You can use function modules like "BP_EVENT_RAISE" in a program and schedule the program to trigger.
2). For externel BIW system also same procedure we need to follow or any difference.
Ans : Externally you need to trigger the same event.
3). i found dependent process chain also had scheduling options as direct scheduling insted of start using meta chain or API. As you said dependent process chain should be mata chain. it seems dependent process chain may be Meta chain or Direct scheduilg.
Ans : Its your choice how you want to schedule it.You can either make that dependent chain a metachain or schedule it separately.
I found at the end of first process chain they kept one process like Raise event and second process chain connected with the help of raise event process event name. If you have any idea about this process could explain a bit more.
Ans : May be they are raising the event in the main chain and triggering the dependent chain using this event.
But Metachain is preferred for such thing.Though it does similar thing.
Hope this helps. -
How to create a validation rule in SAP BODS Job
Hi Experts
I have created a BODS Job and in that job i have to create a validation rule as if the cust_id is null the loading must stop.
I dont have idea where i have to define this validation rule in the Job and how to stop the load job if the validation rule file.
My Job was defined like below image
Please guide me where i have to define the validation rule and how to stop the load job.
Thanks in advance
PrasannaKumarHi samatha b
Thanks for your response. I have done as you said and now i can rise the exception.
I have another requirement as per the validation transformation the data will load into Pass table and Fail table after job execution. If any data entered into fail table i have delete the data loaded into Pass table.
Here i am facing problem as my target tables are MySQL tables and when i am writing scripts i wrote the script as
sql('database','delete from <tablename>');
but as it is an SQL Query execution it is rising exception for the query.
How can i delete the data loaded into MySQL Target table using scripts.
Please guide me for this error also
Thanks in Advance
PrasannaKumar -
How to create file based on date value
Hi
Hope you'll help me. I can't find right way to tackle the problem. I need to read a file which name is created based on month and years' value. File name format is as follows: INMMYY.log. So to read it I must create File object using this file name format. I tried to use Calendar class get necessary information using get() method. Unfortunatelly returned month's value is always 2,3,4 and so on..(I need 02,03). There is problem with year's value als. It's returned in form YYYY but I need YY.
Does anybody have any idea how to create string INMMYY in the easiest way ??
Thanks in advance :)Use java.text.SimpleDateFormat.
-
How to create Form based on a table to display multiple record
Hello All,
Would somebody please tell me how to create a Form based on a single table ,
to view and insert multi record based on a single table.In other words I would like
to have a form as shown below ,where the users can Insert,update,delete,query and so on
Item Id PArt Number List Price
100 Item-1 $120.oo
200 Item-2 $150.00
300 Item-3 $50.00
I know I can do it as Single Record block using Tabular Format,but multiple record ?????
Thanks in Anticipation
BabuTry this method,
1. Creat a Master Detail Form (Custom Layout and not tabular)
and in the master block select one field.
2. In the HTML layout for master remove the reference for
that field(so that nothing will appear in the master block
of the form).
3. Before the update (in the Pl/SQL event handler select the 'Save' event and write the following code to avoid updating master block).
p_session.set_value(p_block_name => 'MASTER_BLOCK',
p_attribute_name => 'MASTER_ACTION',
p_value => 'None');
doSave;
For eg, let's say
Master is from 'Dept' table and Detail is from 'Emp' table(with join condition Dept.dept_id = Emp.dept_id). In the master remove everything except dept_id field and in the HTML layout for master remove the reference of the dept_id field(you cannot remove this field physically from the master layout). Now the form will look like multirow form rather than master detail form but only problem with this workaround is 'Detail Action' will be present in the detail block.
I hope this will help you.
Thanks
-Krishnamurthy -
Newbie - How to create XML based on given schema
Hello,
We have a requirement to create an XML message from our system (Oracle 9iR2 with Oracle Apps 11.5.10). The XML is generated from a query in our HR tables, and must be in a specific format (schema and example XML has been provided to us).
Newbie question is this: What is the best way to create this XML message (dynamic data coming from a SQL select) while ensuring that it matches the given schema? Most of our developers are strong PL/SQL with limited Java experience.
Thanks,
-- JohnI've updated the FAQ with an answer and example for this question...
Please see the following thread
How to create XML from relational tables based on an XML Schema ?
Maybe you are looking for
-
Error message when installing itunes on Windows XP
C:Documents and setting not vaild with Win32 applications. I do not know where to go from here.
-
When I attempt to insert an image (.jpg) in my blog, the title (if used) appears, but the image doesn't. Images that worked before I upgraded to version 3.6.10 will not load now either, but the images that were inserted before the upgrade are fine. B
-
OWSM Policy - how to access subject from within protected service
I am setting up a new instance of SOA Suite 11g for integration purposes at my organization. I am planning to use predefined WSM policies to protect the services (see http://download.oracle.com/docs/cd/E12839_01/web.1111/b32511/policies.htm). Most co
-
DB: Release 8.1.5.0.0 Server: DEC Alpha OSF1 V4.0F Driver: thin, version? We're using JDBC to access Oracle tables from classes loaded into the database with loadjava. I can execute a statement and get a ResultSet, but I haven't been able to find a w
-
Hello. Does anyone know if there is a way to revert to Leopard printer drivers? My Indesign CS4 is having intermittent issues printing with the new drivers. I have an older machine with Leopard on it and it can print the same document to the same pri