How to create recovery disks for Lenovo H530s with WIndows 8.1

Hello there,
I just purchased a Lenovo Hf30s type 10131 with Windows 8.1, mini tower: http://support.lenovo.com/us/en/products/desktops-and-all-in-ones/lenovo-h-series-desktops/lenovo-h5...
I like to create recovery disks, but the already installed program OneKey Recovery does not have the option of recovery disks, it allows only larger media such as USB stick and hard disks.
Here to I have 2 questions:
1. Is there a way to create a recovery disks that will create the original factory settings with 5 partitions?
2. Does any one knows if the recovery siskd sold by Lenovo (for Netherlands they cost between 23 and 38 Euro) would do the job by creating the factory settings with 5 partitions?
My goal is to reformat the hard disk and aprtitionig it the way I need it, but in case of anything, I would like to be able to go back to the original facttory state of the unit, especially if I have a harddisk failure and neer to replace the hard didks.
Thank you in advance and I wish you a very pleasant and successful day.

Hi Mlenovo,
Welcome to the Lenovo Community.
As per the query we understood that you are looking to create a recovery drive for your Lenovo h530s desktop.
As you have asked for the recovery disk, please refer to the below link this might help you to create the recovery media
Click here for the recovery media.
Hope this helps! Do post us back for further queries.
Best regards,
Ashwin.S
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Similar Messages

How to create recovery disk for windows 8.1 after update from windows 8.

My laptop came with windows 8 and i have recovery discs for windows 8.
Now i've updated to windows 8.1, so i want to creat recovery discs for windows 8.1.
So in future when i use recovery discs i dont have to download windows 8.1 again.
Please tell me if there is any way to do this.....

As colakid posted, in Windows 8 the ability to create a recovery CD/DVD has gone. Your options are to:
create a recovery USB; or
create a recovery image.
Recovery USB
Colakid's post talks you through how to make a recovery USB: from control panel, choose Recovery, then Create a Recovery Drive, and follow the prompts.
However, the 'recovery USB' can be a bit misleading. When the wizard starts, there is an option to 'copy the recovery partition from the PC to the recovery drive'. If you do not check this option, you will still need installation media to reset your PC.
Since you have upgraded from Windows 8 to Windows 8.1, you will probably not be able to check this option, as it will be greyed out (like it is in the picture in Colakid's post).
If you go ahead and create the USB anyway, you will be able to boot to it, but you won't be able to reinstall Windows unless you have the installation media (or possibly a system image, though I haven't tried that).
Recovery image
The recovery image is an image of your computer that Windows will use when you select the 'refresh my pc' option. You can create a recovery image using the recimg.exe tool.
First, open an elevated command prompt (type cmd and press Ctrl + Shift + Enter).
Next, create the recovery image by typing:
recimg /createimage [path]
Where [path] is the folder you want the image in, eg C:\Recovery. You cannot set the file name - it will always be called CustomRefresh.wim.
Let it run its course. When it's done, you can check that it is the current recovery image by typing
recimg /showcurrent
It's important to keep in mind what a recovery image contains. It will have your Windows system files (in their current state), and the desktop apps you have installed (so it makes sense to do this after a fresh install of Windows). It will
not backup any Metro apps or user files, because these are not deleted during a system refresh. If you want a complete backup of everything on your computer the way it is now, you should make take a complete system image (which
can be done from the File History settings in control panel - at the bottom left there will be a 'System Backup Image' option - or you can do it using any other backup software like Ghost or Acronis).
In my case, I created the recover image straight after upgrading to Windows and it was about 6 GB.
Prepare/Create and register an recovery partition, so the option Copy the Recovery Partition becomes available in the recovery drive UI application.
In elevated command run> RECIMG -CREATEIMAGE C:\REFRESHIMAGE<
This will create a new custom.wim in a folder Refreshimage.
Now lets get ready to register the path of the image, so our create recovery drive option(COPY THE RECOVERY PARTITION FROM THE PC TO THE RECOVERY DRIVE) becomes available.
> In the folder you created there will be a> custom.wim<
change it to>INSTALL.wim<
> Create a folder In Cd/directory using Elevated command> mkdir c:\Win8.1-Recovery,>
Win81-Recovery<.
> Copy the INSTALL.WIM. Put in the Win81-recovery folder created.
> Run in elevated commad>REAGENTC /SetOSImage /Path C:\Win81-Recovery\INSTALL.WIM /Index 1<
Do not copy the arrows if using copy and paste, that is my way of pointing out lines of code
Information provided by the link below, thanks Keith. I simplified the process for easy following and added my own tweak from trial and error for the install.
blogs.technet.com/b/keithmayer/a···ive.aspx

How to create recovery discs for HP notebook with preinstalled Windows ?

I Have just bought the HP ProBook 4530s with preinstalled Windows 7 Home Premium 64bit.
The notebook was purchased in the hipermarket so that it has no Windows installation discs.
There is a Windows 7 label sticked to the machine.
When I try to use standard Windows 7 procedure:
Start > Control Panel > Backup Your Computer > Create a system repair disc
it shows the error:
System Repair disc could not be created
the parameter is incorrect 0x80070057
How to create system recovery discs ?
BR
Sylwek

Hi BH,
I have read the link you suggested and tried to find HP Recovery Manager at my notebook.
1) I typed Start > Search > "Recovery" but it was not installed.
2) I ran the HP Software Setup to check recommended and optional HP applications. HP Recovery Manager was not there.
3) I downloaded HP Recovery Manager for Windows 7 and ran the installation
I accepted the default folder.
C:\SWSetup\sp45415
It showed an installation form for a while and then completed with no message.
4) I repeated action (1) but no HP Recovery Manager.
5) I checked uninstall menu but no HP Recovery Manager.
Please let me know what to do next ?
BR
Sylwek

How to create recovery disk of OS X lion with Xcode 4

Dear All,
Can anyone tell me please how to create recovery disk for osx lion in case my OS crash . I want to create recovery disk please help me .
Regards
alfan

Dear ,
i am facing problem to upgrade my macbook pro 15 inch 10.6.3 to os x lion 10. 7 with recovery drive.
actually i m trying to install os x lion with the following method but could not install. i use 2 methods to install os please help me where im doing mistake.
1st method.
i make a recovery drive with recovery disk assistant on macbook air 13 inch which is shipped with lion 10.7 . and i connect my recovery drive with macbook pro 15 inch on which OS is snow leopard 10.6.3, for upgrade/install OS X lion on my macbook pro 15 inch by recovery drive.
when i hold down option key i can see my recovery drive . i can boot through my recovery drive but when i try to install os x lion the computer says
"you cant upgrade this version of mac os x "
2nd method
i made recovery drive on macbook pro 13 inch which is upgraded snow leopard to lion and then i try to upgrade my macbook pro 15 inch then the same problem i am facing
"you cant upgrade this version of mac os x "
Please help me
Regards
alfan

How to create a record for table PLAF with order type 'NB'.

How to create a record for table PLAF with order type 'NB'(standard purchase order).
who can tell me the T-code or some usefull information?
Thanks.

Hi
This will be updated automatically when generate planned orders thru MRP. (MD02)
regards
Srinivas

How to create sql query for item master with operator LIKE with variables?

hi all,
How to create sql query for item master with
operator LIKE(Contains,Start With,End With) with variables using query generator in SAP B1 ?
Jeyakanthan

Hi Jeyakanthan,
here is an example (put the like statement into the where field)
SELECT T0.CardCode, T0.CardName FROM OITM T0 WHERE T0.CardName Like '%%test%%'
The %% sign is a wildcard. If you need start with write 'test%%' and otherwise ends with '%%test'. For contains you need '%%test%%'. You also could combinate this statements like 'test%%abc%%'. This means starts with test and contains abc.
Regards Steffen

How to create 800K disks for Mac Plus

I've acquired a Mac Plus in good working condition, but it's just standalone. Eventually I want to network it, but for right now, is there a way to use my Mac Mini or a PC to create 800k disks for the Mac Plus? Things like OS upgrades and other software are available out on the net, but I can't get them to the Plus. I've tried a USB floppy disk drive on the Mini, but it only works with HD diskettes.

sacsr,
"Can I take MacPlus-appropriate software from the internet, burn it on a CD on my Mac Mini, and load it into the Mac Plus?
Yes! : ) That simple. The Plus was the first 'business Mac' and I loved it until I got a dual floppy SE with an external SCSI HD and an excellerator card with a math co-processor. It was a very capable computer. But, as soon as you used a faster Mac, you never went back to the Plus. You could fix lunch while waiting for disk swapping to boot and load MS Word 3.
What we are saying is that the SCSI bus on the Mac Plus has far more options available for someone shopping for resources.
We have over 300 Macs of almost every model. We have been given over 100 floppy drives. We shop at government surplus stores and auctions. In all that stuff, we only have a couple of 800 k drives but hundreds of SCSI devices. They are SO much easier to find and are so much cheaper to buy and customize.
If you can find a Macintosh 800K (M131) floppy drive, great. Then you also have the problem of finding double density floppy disks ( high density disks with tape over the hole are not reliable in the older drives.)
here is a website with the whole list:
http://www.mandrake.demon.co.uk/Apple/drives.html
I remember buying an 800k floppy drive new in 1986 for several hundred Dollars. The external CD-ROM drives sold for $300.
It will probably be much easier to find an Apple 300 or 600i CD-ROM drive that should read CDs burned in your modern Mac. Your original question was about floppies. The real question is "How do I get data from a new computer to an old computer." That question offers more possibilities. I am suggesting a better and cheaper alternative. Having fun with older equipment requires purchasing intermediate equipment.
Jim

How to create recovery disk on HP envy dv6 7258nr notebook pc - window 8

I m trying to create recovery disk from recovery drive which is created by hp while purchasing the laptop, while taking back up from recovery manager, Recovery Manager says (Recovery Partition has been removed - Recovery Media creation option is no longer available) , but as per my knowledge i did not took back up of recovery drive. So what should i do to take back up of my recovery drive to **bleep**.

Based on what you have stated, it appears that you or someone else with access to your notebook deleted the recovery partition. Without the recovery partition on the hard disk you can't make recovery media.
Your best option at this point would be to purchase a recovery disk set from HP or an HP Partner.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

How to create a shortcut for desktop as with IE?

I've switched my browser to "Firefox" from 'Internet Explorer and would like to know how to create a shortcut for my desktop.

You can drag the favicon on the left end of the location bar onto the desktop to create a shortcut.
You can also use an extension.
* SaveLink: https://addons.mozilla.org/en-US/firefox/addon/savelink/
* Deskcut: https://addons.mozilla.org/en-US/firefox/addon/deskcut/

How to create recovery disk on Win8 Pro notebook

hi
ive just rec'd my lenovo s430 running win8 pro
i'd like to create a recovery disk, 1 that restores the notebook back to factory default (lenovo bloatwares and all)
how can i do it? i cant find any info on the web.. plenty for win7 but none for win8.
thx~!
Solved!
Go to Solution.

syl801 wrote:
i actually want to create a recovery drive since ive got a few spare usb.
i've read this:
http://www.intowindows.com/how-to-create-windows-8-recovery-drive/
and it says the drive needs to be at least 256mb... isnt that a little too small for the whole Win8 recovery file?
If you read down in that link you reference, you'll see this: http://cloud.intowindows.com/wp-content/uploads/2012/07/Create-Windows-8-Recovery-Drive-Step9.jpg with a checkbox for "copy the contents of the recovery partition to the recovery drive".
That will include the Lenovo recovery image - or it's supposed to anyway. I can't test since I only have a 7 -> 8 updated machine at the moment. This only works correctly when used on a machine containing the original Lenovo Win 8 install.
256MB gets you the Win 8 recovery/repair tools but not the image. When the image is included it will take multiple GB. I'm told an 8G flash drive is required.
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

How to make boot disk for MacBook Pro with Mavericks pre-installed

Hi -
I recently bought a new 15" MacBook Pro with Retina Display, which came pre-installed with Mavericks (10.9.0). I want to make a bootable USB disk of the system software, and have successfly used DiskMaker X (formerly Lion DiskMaker) to make the USB boot disks for Lion and Mountain Lion. In those cases, however, I was running earlier versions of the OSX, and downloaded the new OSX version -- Lion and Mountain Lion -- from the App Store in order to make to make the disk. In this case, however, Mavericks was pre-installed, and I was unable to download it from the App Store (an alert said that it couldn't be installed on this computer... presumably because it was already installed). I would apprecite any suggestions as to how I can create the boot disk without the ability to download Mavericks. Thanks very much for any help anyone can provide.
Shelly

Open App Store and locate the full installer download file (5.29 GBs) for 10.9.1. Download to your computer.
Make Your Own Mavericks, Mountain/Lion Installer
After downloading the installer you must first save the Install Mac OS X application. After the installer downloads DO NOT click on the Install button. Go to your Applications folder and make a copy of the installer. Move the copy into your Downloads folder. Now you can click on the Install button. You must do this because the installer deletes itself automatically when it finishes installing.
2. Get a USB flash drive that is at least 8 GBs. Prep this flash drive as follows:
Open Disk Utility in your Utilities folder.
After DU loads select your flash drive (this is the entry with the mfgr.'s ID and size) from the leftside list. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
Select the volume you just created (this is the sub-entry under the drive entry) from the left side list.
Click on the Erase tab in the DU main window.
Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
Click on the Erase button. The format process can take up to an hour depending upon the flash drive size.
3. Use DiskMaker X to put your installer clone onto the USB flash drive.
Make your own Mavericks flash drive installer using the Mavericks tool:
You can also create a Mavericks flash drive installer via the Terminal. Mavericks has its own built-in installer maker you use via the Terminal:
You will need a freshly partitioned and formatted USB flash drive with at least 8GBs. Leave the name of the flash drive at the system default, "Untitled." Do not change this name. Open the Terminal in the Utilities folder. Copy this command line after the prompt in the Terminal's window:
sudo /Applications/Install\ OS\ X\ Mavericks.app/Contents/Resources/createinstallmedia --volume /Volumes/Untitled --applicationpath /Applications/Install\ OS\ X\ Mavericks.app --nointeraction
Press RETURN. Enter your admin password when prompted. It will not be echoed to the screen so be careful to enter it correctly. Press RETURN, again.
Wait for the process to complete which will take quite some time.

How to create group bom for multiple plants with different company codes

Dear all,
In my current scenario we have 5 Company codes with a plant with each company. The same kind of materials exist in all the 5 plants, so what i want is when i create any BOM, that BOM has to extend in all the company codes, as with GROUP BOM i can able to extend the same in only one company code.
So how to do this?
Thanks in Advance
Bhushan

For that first extend all the materials to all the plants... In one plant create a BOM for the material..
In all other polants in CS01, click COpy from .. There you mention the matreial and the plant in which the BOm is alerady available..
karthick

How to create a omniportlet for oracle portal with apex

Hello everyone!
Is there someone who knows how to create a omniportlet?
This is for openning an application in apex from oracle portal using single sign on.
Could you explain me step by step how to do this please?
Thank you.
Regards

Hello Erik,
Please check if the following can help you - http://www.oracle.com/technology/products/database/application_express/howtos/omniportlet_index.html .
Regards,
Arie.

How to set security type for lenovo working with hotspot?

How to set wireless security type for lenovo laptop working with hotspot?
Since I can connect with the other laptops except this brand.

//add related mutip-part to combine parts
MimeMultipart multipart = new MimeMultipart("related");
//attach a pdf
messageBodyPart = new MimeBodyPart();
fds = new FileDataSource("h:/something.pdf");
messageBodyPart.setDataHandler(new DataHandler(fds));
messageBodyPart.setFileName(fds.getName());
multipart.addBodyPart(messageBodyPart);
//add multipart to the message
message.setContent(multipart);
//send message
Transport.send(message);

Cannot make Recovery DVDs for the G580 with Windows 8

I notice that Windows 8 Notebooks are no longer being sold with Licenses affixed to the underside. So if anything goes wrong (e.g. we have to replace the HDD at a later date) we cannot just use a Windows 8 disk to restore the operating system.
This means it is important to make sure we have recovery DVDs.
With previous versions One Key Recovery had an option to make restore DVDs - it misses that option with Windows 8.
Phoned Lenovo support who said that we should make the DVDs through the Windows Backup system, which again is fine but on both Lenovo's I have tried it on Windows 8 cannot make a backup to DVD. Also even if we could make the windows backup or system repair disks they would not allow a complete factory restore to a brand new HDD.
How do we make Recovery DVDs that would be bootable and would restore the Operating System to a brand new HDD if the worst should happen and the existing HDD suffered unrecoverable failure? So far the only option that has come up from my various phonecalls is "buy a set of recovery discs for £25-£35 .... which would be a bit unfair having only had this 2 days.
Solved!
Go to Solution.

thanks for the feedback.
Could you please check out the following link and see if it contains a possible solution, I am aware it states only Think products in the compatability list but there are "cross-over" points where something could be of relevance to other Lenovo products.
http://support.lenovo.com/en_US/downloads/detail.page?DocID=HT076024
thanks in advance
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

How to create recovery disks for Lenovo H530s with WIndows 8.1

Similar Messages

Maybe you are looking for