How to create releases against BPA without creating ASL

Hi,
I have a requirement to create PO against BPA whenever requisition is created(from drop ship SO). As we have thousands of items we cannot create ASL.
Could you please let me know the steps to do this automatically.
Thanks in advance.

user12288821 wrote:
Hi,
I have a requirement to create PO against BPA whenever requisition is created(from drop ship SO). As we have thousands of items we cannot create ASL.
Could you please let me know the steps to do this automatically.
Thanks in advance.First as far as i know..you can't create a PO against a BPA..if you want to create a PO it should be against GBPA
without ASL i doubt..it can be possible..
Mahendra

Similar Messages

How to create a Blanket Release in iProc from a approved requistion

Hi Gurus,
How to create a blanket Release in iProcurement from a approved requisition. I have followed the below steps.
1. Created a BPA from Front end.
2. Run Loader Data program.
3. Above program reflected the BPA in iProc.
4. Created requisition from BPA.
5. Requisition has been approved.
After this i am stuck. How to proceed ahead. I want to create a Blanket Release from approved PR and then receive in iProcurement.
please help me on this. We are using 11.5.10.2
Regards,
john

911765 wrote:
Hi Mahendra,
Thank you so much for your reply.
So you mean to say that it all depends upon the Sourcing Rule and ASL based upon that system would automatically create a Blanket Release or If its Automatic Release/Review then we have to manually create release through autocreate.
The reason why i am asking this query is now when i tested it, system is automatically creating release and starngely there is no Sourcing Rule and ASL has been defined.
But we are looking for a Manual Release through autocreate window.
It would be great if you could please suggest.
Regards,
JohnJohn,
When you say system is automatically creating release..as far as i know...it should be referencing a PO..correct...in the releases window..
can you pull that up..and see if you can get any clue..bcz that PO would BPA...
Also I am not that much into Iproc...I don't know...whether Iproc has some other setups
HTH
Mahendra

How to create release order for value contract?

dear experters,
I create a value contract by T-code:va41, order type"WK1".I set a Assortment module to this order and mateirl "WKM1" to it.
then I create release order by T-code:va01 with refrence to this value contract,but it set the material "WKM1" to the sales order, and I can't modify this material! I want to put another material which belong to the assortment module in the value contract. I want to know how.
thanks.
Best regards
lance

Assortment Module for Value Contracts
This function enables you to define a list of materials that can be released from a value contract. Materials can be assigned to more than one assortment module.
An assortment module is an entry tool and can be called up from the value contract. It is valid for a certain time period.
If you delete a material from the assortment module, to which a value contract refers, you will be unable to release that material.
In the value contract, only materials with the same sales organization and distribution channel as the value contract can be taken from the assortment module. All the other materials in the assortment module are not displayed in the value contract.
To fulfill both these requirements, two types of value contracts are offered in the standard system:
Value contract type WK 1
You can specify a product hierarchy or a assortment module for value contracts with contract type WK 1. The system will always propose this type of contract, if you want to create a contract for several materials or a certain group of materials. All the materials in the relevant assortment, or belonging to the specified product hierarchy are then relevant for release.
Value contract type WK 2 (material-related)
You can create contracts for one material (usually configurable) with this type of value contract. A software company is an example of where this kind of contract is often used. There, a contract for the value of $500,000 is made with the customer for one specific software product.
You can also agree on the length of the contract for this type. The contract duration can be agreed at item level and can be different from the contract duration specified at header level.
You can store special price agreements for the value contract. These price agreements can then be used at any level. For example, a value contract can contain prices for individual materials, or discounts that are valid for every released material.
Release Orders
The customer fulfills a contract by issuing orders against the contract. The contract does not contain any exact dates for deliveries, so you need to create a sales order to release against a value contract.
When a release order is created for the contract, the system automatically updates the released values in the contract. The release order value is calculated from the total of the open order and delivery values, plus the value that has already been billed to the value contract.
The system also updates the released value for subsequent changes (for example, overdelivery of contract release, price changes in the billing document, partial deliveries, returns, rejection of order items, cancellation or reversal of orders, deliveries or billing documents).
You can create a release order in any currency. The system automatically converts this currency into the one agreed upon in the value contract on the pricing date for the contract release order.
Creating Assortment Modules for Value Contracts
Procedure
To create an assortment module, proceed as follows:
1. From the initial screen choose Logistics >Sales and Distribution >Master data.
2.Choose Products >Value contract - Assortment module > Create.
You will then be in the Create assortment module: Initial Screen.
Module type 6 is defined for the value contract.
3. For external number assignment, enter a module number.
You can then use existing modules as a reference by entering the name of the module under reference.
4. Choose Enter.
5. Enter a short description for the module.
6. Enter a validity period for the product proposal.
During a release, the system checks if the release date lies within the validity period.
7. Create the materials that you wish to assign as items to a module.
You can display a list of materials as a product proposal, which you can then copy into the assortment module. To do this, choose Suggest material, enter the selection criteria in the subsequent screen and copy the selected materials to the items. Use Edit > Delete item to delete the materials that you do not want to copy to the assortment module.
8.Save your entries.
Also Please check the copy control in VTAA
Regards,
Anbu

How to create excise invoice without material document

Hi,
I want to create excise invoice for a subsequent credit note. I am agreed to give additional amount to my supplier for which i have not paid to him, now when i issue a subsequent credit note, how to create a excise invoice and do the excise entries without a material document.
Please suggest a solution
Regards,
Ashish

Go to T Code J1IH.
Select Additional Excise. Replace the document number by the vendors excise invoice. Enter the excise duties in lower box and click on Determine GL accounts button to simulate and then post.

How to create a viewobject dynamically without using wizard

Hi,
I am Using jDEV 11G, i need to create a viewobject dynamically without using wizard, without binding from any entity.
Actually my intention is to make a grid like in .Net, when a user want to create a new row in RichTable without using DB.
just like shopping cart.
i have done thsi code:
ViewObjectImpl view=new ViewObjectImpl();
view.addDynamicAttributeWithType("Att1","String",null);
view.addDynamicAttributeWithType("Att2","String",null);
view.addDynamicAttributeWithType("Att2","String",null);
Row rw=view.createRow();
rw.setAttribute("Att1","First1");
rw.setAttribute("Att2","First2");
rw.setAttribute("Att2","First3");
view.insertRow(rw);
I have a RichTable , i need bind this viewobject into that.
Edited by: vipin k raghav on Mar 10, 2009 11:39 PM

Hi Vipin,
You can create the view object with rows populated at run time.
[http://download.oracle.com/docs/cd/E12839_01/web.1111/b31974/bcquerying.htm#CEGCGFCA]
For reference of how to create an empty rwo at run time on button click
[http://kohlivikram.blogspot.com/2008/10/add-new-row-in-adf-table-on-button.html]
~Vikram

How to create a new Oracle OSB project automaticaly with script without IDE

Hello,
I want to create automatically an "Oracle service bus project" and an "Oracle service bus configuration project" with scripts (ANT or Maven or ...) without using IDE, without using workshop or Eclipse. I want to create automatically (ANT or Maven) just a skeleton of an OSB project witch i can use after in workshop.
I want to create 1 "Oracle service bus configuration project" with many "Oracle service bus project" automatically (ANT or Maven or scripts) witch i can use after in workshop. How to create a new Oracle OSB project automaticaly with script without IDE ? How can i do this ?
I'm using Oracle service bus 10.3.1
Thank you for your help.

Thank you for your response,
I do not want to just create the services (proxy services and business services) but I want to create a template for 40 OSB project with the same scripts ANT/Maven.
Template="Oracle service bus configuration project" + "Oracle service bus project" + services of 40 OSB projects
The goal is that I have more than 40 projects to create and just the name of the projects that changes (when I say the name of the project ie the name of the OSB project, the name of proxy services and the name of business services ).
So I want to give my script (ANT/Maven) the name of 40 OSB project and the script must generate the skeleton of the 40 projects at once time and after generation of skeleton of the 40 project, I will import them in the workshop to add manually mapping and routing and other things that differs from one project to another.
So i want to generate automatically a skeletons of 40 OSB projects using a script (ANT / Maven) and I give to the script juste the names of the 40 projects.
I want to create a "Oracle service bus configuration project" and "Oracle service bus project" automatically of 40 OSB projects (ANT or Maven or scripts) witch i can use after in workshop.
I want to create one 'template' of all 40 projects in the same time, with the same directory structure (Transforlation, Business services, proxy services, WSDL .....) and all 40 project have the same transport, just the names of projects and services witch changes and i can give to the script all names of projects and services and i can give also all WSDL.
Regards,
Tarik

How to create backup file on itunes for ipod touch 4g game apps data? Is there a way to do it? I want to try an app on my friend's computer, but you can't add apps on another computer without having your own ipod's data being deleted. Thx for any help!

How to create backup file on itunes for ipod touch 4g game apps data? Is there a way to do it? I want to try an app on my friend's computer, but you can't add apps on another computer without having your own ipod's data being deleted. Thx for any help!
I want to know how to create a backup file (because I'm pretty new with itunes, and it's hard to use it for me still), how to store my app data/media/videos, etc. And how I can retrieve them back when I'm done with the app I tried on my friend's computer.
If anyone can help, it'd be great! Thank you so much!

Sure-glad to help you. You will not lose any data by changing synching to MacBook Pro from imac. You have set up Time Machine, right? that's how you'd do your backup, so I was told, and how I do my backup on my mac. You should be able to set a password for it. Save it. Your stuff should be saved there. So if you want to make your MacBook Pro your primary computer, I suppose, back up your stuff with Time machine, turn off Time machine on the iMac, turn it on on the new MacBook Pro, select the hard drive in your Time Capsule, enter your password, and do a backup from there. It might work, and it might take a while, but it should go. As for clogging the hard drive, I can't say. Depends how much stuff you have, and the hard drive's capacity. As for moving syncing from your iMac to your macbook pro, should be the same. Your phone uses iTunes to sync and so that data should be in the cloud. You can move your iTunes Library to your new Macbook pro
you should be able to sync your phone on your new MacBook Pro. Don't know if you can move the older backups yet-maybe try someone else, anyways,
This handy article from Apple explains how
How to move your iTunes library to a new computer - Apple Support''
don't forget to de-authorize your iMac if you don't want to play purchased stuff there
and re-authorize your new macBook Pro
time machine is an application, and should be found in the Applications folder. it is built in to OS X, so there is nothing else to buy. double click on it, get it going, choose the Hard drive in your Time capsule/Airport as your backup Time Machine and go for it. You should see a circle with an arrow on the top right hand of your screen (the Desktop), next to the bluetooth icon, and just after the wifi and eject key (looks sorta like a clock face). This will do automatic backups of your stuff.

How to create iTune or App Store without credit card for my existing Apple ID without create new Apple ID or email?

I got 2 Apple ID and the first time to I use it to iTune or App Store, a box will pop out and telling me this:
"This Apple ID has not yet been used with the i Tunes Store. Please review your account information."
Then, I click on the button, "Review". Bla bla... but ended up, I must provide a credit card in order to complete it.
I do not have credit card, so I search 'How to create iTune or App Store without credit card', same link and same tactic only valid for New Apple ID.
So, it seem no other option to create iTune or App Store without credit card for existing Apple ID, right?

The same thing is happening to me!

How to create a basic pay wage type without copying from another wagetype

Hi Gurus,
How to create a "New Wage Type" without copying from another wagetype?
& i want this wage type "Non Taxable" as per my organisation requirment.
pls send me config docs on my email id. Pls it is very urgent
Email: [email protected]
Pls Help me
Regards
MHPO

Hi Ram,
Thanks
One more thing should i create "Non taxable payment wage type" in Basic Pay.
in Basic pay there is no any wage type copy Non taxable Wage type but Additional Payments there is one Copy Wage type name is "M400 Non taxable payment"
i check the all config related setting related to M400 non taxable payment
can i copy in Basic Pay any wage type & create new wage type (xyz)
& i change all setting eg processing class & all is similar in (XYZ) =M400
its is ok or not

HT2731 how to create a free apple id without puttin in the cridit card info?

how to create a free apple id without puttin in the cridit card info?
Card type "None" option is not available

Welcome to the Apple Community.
To be able to download free apps without a recognised method of payment or gift card.
Open iTunes and navigate to the app store. Select a free app to download. A simple way to do this is to scroll down to the top free apps box on the right hand side, hover your mouse over the first item and click on the free button that appears when you hover over it.
A pop up will open asking you to sign in with your Apple ID click "create new account", click continue to create your account. Check the box to accept the store terms and conditions and click continue.
Enter your email address, password, security question, and date of birth, click continue. Now, you will be asked to provide a payment method. Note now that the last option says "none".

How to create a popup window to load HTML page in AIR application without using any mx or spark?

How to create a popup window to load HTML page in AIR application without using any mx or spark components?
I need to load the HTML page in popup in AIR application without using any of the <mx> or <spark> components. I need to open in the application itself not in the browser.(If we use navigateToURL() it will open in th browser)

Can we achieve this? can somebody help me on this scenario..

How to create a background job without a variant ?

How to create a background job without a variant ?

Hi,
Go to se38.. specify the program name and execute Or use Tcode
On the selection screen specify the variant...
Then from the menu options choose program->excute in background...
In this way we can crate a backgroup job with out crateing any varinat for the report...
Satya.

How to create an identical local copy of a mail without attachments?

Hi,
I would like to save a copy of an IMAP-Message to my db without the attachments.
As I cannot modify the original message, I tried to create a new MimeMessage with the constructor MimeMessage(MimeMessage source) and then remove the attachments - this works fine so far, but using this constructor only the body seems to get copied without subject, recipients or from-address.
Can anybody give me a hint how to create an identical local copy of a Message-Object? I would rather like to do this without installing any local third party providers.
Regards
Karsten

Sorry, found the problem - I did some things with the InputStream before I should not have - now the message gets saved without attachments and can be reopened.

How to create operations without entering a performing work center

How to create operations without entering a performing work center ? which control key should i select ?

Hi
QM01 is control key used for all the task lists of Quality.
there is no such a configuration associated with control key & usage of work center.
Work center is used for the activity capturing perpose & control key is to control operations.
I hope this is clear.
Entering a work center is totally depends on the scenario & not control key.
Regards
Sujit

Please let me know how to create a iTunes ID without billing account because I don't have a bank account?

Please let me know how to create a iTunes ID without billing account because I don't have a bank account?

Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card

How to create releases against BPA without creating ASL

Similar Messages

Maybe you are looking for