How to create rescue and recovery partition for my thinkpad edge 11

Hi,
I'm using thinkpad edge 11 with win 7 home Premium 32 bit.
Before, i tried to restore to factory setting, there is a drive partition of rescue and recovery in my thinkpad.
But, when I was trying to restore to factory setting, I missed the steps and made the drive partition of rescue and recovery formatted.
So, now, I don't have it again in my thinkpad.
Then, after that, appeared another drive partition in my thinkpad with name S: Sytem, beside C: WIndow7 and D: Data.
So, I need the solution from you all as knowing more about thinkpad edge in this forum.
1. How I remove the unkwon drive, S: System from my thinkpad?
2. How I can create again the rescue and recovery partition on my thinkpad(wih Win 7 Home premium 32bit installer inside plus all the drivers)?
Thanks...

Hello mate,
To restore the Q: partition you have to use the Lenovo Recovery Discs. Hope you burn them before erasing the partition, otherwise you have to order them from Lenovo.
Knowledge is of two kinds. We know a subject ourselves, or we know where we can find information on it.
ThinkPad T510 4313-CTO Windows 8 x64 - Intel Core i7-620M - NVIDIA NVS 3100M - 8GB RAM - 240GB SSD- Intel Centrino Ultimate-N 6300 - Gobi 2000.
ThinkPad Helix 3697-CTO Windows 8.1 x64 - Intel Core i7-3667U - Intel HD Graphics 4000 - 8GB RAM- 256GB SSD - Intel Centrino Advanced-N 6205 - Ericsson C5621gw

Similar Messages

How to create Rescue and Recovery disc for Windows Vista Home Basic with G530 Lenovo Laptop?

Hi All,
I have purchased G530 Lenovo laptop 2 weeks back.
I coudn't find installation/recovery discs in my laptop box.
I went across the forums and came to know that it is not available now-a-days as it was coming previously.
So, anybody can help me, how to create a recovery disc?
This is needed when I format my laptop.
Thanks in advance.
Regards,
Umesh.

Click on what used to be the "Start" button and search for "create" or "recovery". It took me a while to find it but it is there.
Use a cd for the first disc and 2 DVD's for the other discs.
T60 2623-D7U, 3 GB Ram. Dual boot XP and Linux Mint.
T400 2765-T7U Windows 7
Registered Linux User #160145
FYI: I am not employed by Lenovo

Creating Rescue and Recovery Disks for Vista

Started to create a set of Rescue Recovery Disks, the Start Recovery Disk created OK, but when I inserted the 1st Disk of the recovery set, the program stalled for over 1 hour no activity, cancelled the operation using the Vista Task Manager Ctrl-Alt-Del.
Now when I try and rerun Rescue and Recovery, it states I have already run the procedure, which is not so. How can i now run the Rescue & Recovery Media Program

You can't. Assuming your machine is on warranty Lenovo support should ship recovery disks to you without charge,
T500: Vista 32, 2.8GHz, 4GB RAM, 15.4" 1680x1050, 500GB 7200rpm, ATI Radeon HD3650 + Intel 4500MHD. T42: XP, 1.7GHz, 2GB RAM, 14.1" 1024x768, 250GB PATA, ATI Radeon 7500.

How to download Rescue and Recovery

I've a K330B with Win7, 64bit. Since the stock Rescue and Recovery does not allow to back-up the 25GB of the service partition, I tried using the Rescue and Recovery for an Ideapad instead. It messed things up for me. So I went back to the system restore point, prior to installing the version for the ideapad.
Now my Rescue and Recovery won't work. It crashes each time I try to run it. I need to re-install it. I can not find the Rescue and Recovery software for a K330B Desktop with Win7 Home Premium, 64bit, anywhere on the Lenovo support site.
Please help.

Hi, divasthapa
When you press Enter at the Lenovo screen, what are the options that appear on the menu? There should be one for BIOS, one to resume normal setup, etc. But there should also be something about recovering your system or something along those lines.
Thanks in advance,
Adam
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

How to install Rescue and Recovery CD to my T42

I ordered Rescue and Recovery CD to install my T42, and I got 8 CDs, one is independant, and other 7 CDs are for T42, so I just wonder how do install it, I mean use which CD, or which is used firstly, anyway, could someone tell me step-by-step to rescue my laptop.
Thanks a bunch.

Well, you should wipe the entire drive before using the recovery disks, including the original recovery partition if it's corrupted.
The disks will create a new recovery partition.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

How to install "Rescue and recovery" on a new harddisk (T60)

My T60 has a 60gb harddisk and I want to upgrade to a 160gb.
I need to know how to install this rescue and recovery on the new disk.
Can some one help me out here
I can imagine for example to create this (hidden) partition with Partition Magic, but how to continue ?

Hello,
Have you considered either cloning your old 60GB hard disk drive to the new 160GB model, or using your recovery discs to install a fresh copy of the operating system plus ThinkVantage utilities to the new hard disk drive?
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
Deutsche Community Comunidad en Español Русскоязычное Сообщество

How to install Rescue and Recovery 4.21 on Windows 2003

There should be a good amount of users running Windows 2003 on their thinkpad for various reasons. As much as I tried, I could not get Rescue and Recovery's MSI to install on my X61 running Win2003 R2 SP2, despite attempts to modify the Setup.ini file.
the changes made in setup.ini:
[Win2003Server]
MajorVer=5
MinorVer=2
MinorVerMax=3
BuildNo=3790
PlatformId=2
The returned installer error is "The current operating system is not supported for running Rescue and Recovery. Supported operating systems includes Microsoft Windows 2000 with Service Pack 3 or Windows XP with Service Pack 1 or later".
This is such a shame as I'm pretty sure RR would run just fine on win2003 as both WinXP and win2003 are based on the same underlying technologies and code. Please advice if there's any method such as a command switch for MSI installer to suppress OS detection error or any modification that can be made to setup.ini to get it to install on win2003 or any utility that can be used to modify MSI files and database? Thanks!
Message Edited by Xseriesfanboy on 08-31-2008 08:26 PM
Message Edited by Xseriesfanboy on 08-31-2008 08:30 PM
Solved!
Go to Solution.

Alrighty..I've manage to google a hack to this problem of getting Rescue and Recovery to install on Windows 2003. So let this post be a guide to how to get this done:
Getting the tools to modify Rescue and Recovery MSI (Windows Installer)
Download and install Orca MSI editor from http://astebner.sts.winisp.net/Tools/Orca.zip
Review http://ravi1337.blogspot.com/2007/05/orca-msi-editor-make-any-software.html, this guide should give you a good idea what you'll be doing with this tool.
Download Rescue and Recovery™ 4.21 from Lenovo
Download Rescue and Recovery™ 4.21 for Windows XP (32-bit) or Windows 2000 from http://www-307.ibm.com/pc/support/site.wss/license.do?filename=thinkvantage_en/z652_setup_rnr42_016c...
Ensure you are downloading full install with all language pack to avoid any missing installation file due to regional settings
Run the installer and see that all files are extracted accordingly.
Modification of Rescue and Recovery Installer
Delete all files in C:\Documents and Settings\(User Account Name)\Local Settings\Temp\ this will prevent confusion on which files are unpacked and created by RR installer
Extract z652_setup_rnr42_016c.exe into a folder named z652_setup_rnr42_016c.
Execute tvtrnr42.exe
The MSI installer is then unpacked to the following default directory: C:\Documents and Settings\(User Account Name)\Local Settings\Temp\. Note that the installer creates two directories for installation of RR, that are {F151F2B3-0C32-44D3-90E2-E639B8024622} and _isXXXX <--- 4 randomly generated digits
The folder _isXXXX contain Rescue and Recovery.msi
On the first run of the installer, the following error will be shown "The current operating system is not supported for running Rescue and Recovery. Supported operating systems includes Microsoft Windows 2000 with Service Pack 3 or Windows XP with Service Pack 1 or later". DO NOT CLICK OK! This is cause the installer to purge all installation files and related directories in the temp directory. Just leave the error window as it is without clicking the OK button!
Copy all TVT files from folder z652_setup_rnr42_016c into both directories
Modify setup.ini entry for Win2003Server with notepad and save changes:
[Win2003Server]
MajorVer=5
MinorVer=2
MinorVerMax=3
BuildNo=3790
PlatformId=2
Right-click on Rescue and Recovery.msi and edit with Orca
Go to LaunchCondition Table
Drop the following rows and save changes:
(((VersionNT=501 AND ServicePackLevel>=1)OR (VersionNT=500 AND ServicePackLevel>=3)) AND WINSERVER=0) OR Installed- The current operating system is not supported for running [ProductName]. Supported operating systems include Microsoft(R) Windows(R) 2000 with Service Pack 3 or later and Windows XP with Service Pack 1 or later.
IEEXISTS=1 OR Installed - [ProductName] requires Microsoft(R) Internet Explorer version 5.5 or higher. You cannot install the Rescue and Recovery program without this version of Internet Explorer.
INCOMPAPPNAME=0 OR Installed - [INCOMPAPPNAME] is installed and is incompatible with this version of [ProductName]. This application cannot be installed. To install [ProductName], uninstall [INCOMPAPPNAME] and then restart this setup.
Not SGEWRONGVERSION OR Installed - [INCOMPAPPNAME] is installed and is incompatible with this version of [ProductName]. This application cannot be installed. To install [ProductName], uninstall [INCOMPAPPNAME] and then restart this setup.
When you're done with these modification, re-run Rescue and Recovery.msi without closing the previous error window. Rescue and Recovery should now install without any glitch! Good Luck!
Message Edited by Xseriesfanboy on 09-01-2008 06:37 AM
Message Edited by Xseriesfanboy on 09-01-2008 06:38 AM

How to create a new Recovery Partition without Recovery Media T440s

Dear All.
My T440s no longer has the recovery partition.
I'm with Win 8.1 Pro, but I would like to restore the system.
How can I do to restore and create a new Recovery Partition?
Thanks,
Lucas Mendes

Hi Larry,
The process is detailed in the document on the link below.
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c01890478
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Creating Rescue and Recovery CD

hi to all...i have a 3000 j115 series 7387-a34 desktop...i wanted to create a rescue and recovery cd...but when i run the lenovo care apps....the link to run the program to create the rescue and recovery cd is missing.....how can i add it back to lenovo care's quick links, so i can create the rr cd???
thanks a lot....
dhaj
Solved!
Go to Solution.

RRMedia.exe" "C:\Program Files\IBM ThinkVantage\Common\spi\RRMedia.exe" Please note that is for a Lenovo 3000 J105 (8258HBU) Yours may be different.
Message Edited by north450 on 06-18-2008 05:15 PM
Lenovo 3000 J105 (8258HBU)

How to undo Rescue and Recovery

Hi, I have a Lenovo X61 notebook. My harddisk was divided into two partitions: OS and data. Recently, i found that my Windows was no longer able to start. I managed to reinstall Windows 7 in the OS partition. All my files in the second partition was preserved. My laptop was working fine then. I realised subsequently however that the Lenovo drivers were no longer there (for eg: fingerprint recognition, which was not necessary, but good to have). So upon digging the box where my notebook was packed, I found the "Rescure and Recovery" CDs. So I plugged it in and restarted, thinking that it will just install the necessary drivers back. But then not only did it delete the Windows 7 that i just reinstalled, but it destroyed the partitions and deleted all my data in the second partition. Is there any way I can restore the partition configuration and all the data I had? Thanks in advance.
Solved!
Go to Solution.

Hi guys,
my probem is almost the same, with a small difference,
i have a T410S, two partions, one lenovo recovery, 2nd crypted by drivecrypt.
Accidently i was pressing the blue thinkvantage button, lenovo recovery started for about 20seconds, after it i removed the battery. If i reboot, it always restart recovery now.
The final question:
Does anybody know what rescue and recovery is doing for the first 20-30seconds during startup ?
Is it useing the format, quickformat ect.. ? Iam sure he didnt start to copy any files first, because before he do
he have to format or something like this,
thanks for your help guys !
tim

How to manage Rescue and Recovery Backups

Hi I've been using disk image backup solutions since the days of powerquests Drive Image. And have had my days with Ghost and Acronis Trueimage. I recently built a clean Vista image on my T400, and I'd like to take advantage of the Lenovo Rescue and Recovery 4.21 tool since it the recovery technology is already part of my system and I have tested it once.
I'm used to the idea that a backup tool will produce an image file, which I can manage myself, moving to various media....hiding under my bed etc. With RnR, I've noticed it prefers to control the directory's where backups are placed (this is a bit annoying to me, but I can live with it, as long as it's isolated to the RRBackup directory - which it appears may not be the case). I do appreciate it's ability to specify various backup media locations (network, CD, 2nd HDD, USB) and recognize that it's a simple approach for basic usage.
Recently I've backed up my image to USB drive, and also to the local disk. I'd like to take that back up and split it up into DVD's and burn it to disk. I know there is a built in RnR feature which lets us copy backups from the local drive (why only local drive ??) to USB/Network/CD, but unfortunately the CD copy feature burns directly to my thinkpad burner...which is a CDR device, not a DVDR device. I'd like to use the DVDR device on my desktop...
Anyway, I'd like to know if there is more resources on how to manage RnR Backups. I found the following guide http://www-307.ibm.com/pc/support/site.wss/MIGR-70344.html (which is hard to get on Lenovo's site...google finds it better), I'm still reading it, but so far it appears more focused on the pre-desktop area than backup management.
Any insight would be appreciated.
Thanks!

Hi Danielle,
Consider this allegory; factory settings will make your thinkpad like a never driven 0 meter car [with reference to software]. Hence it will be far-flung from it's previous state. Apart from what you have already saved on memory stick, all settings and the software you have installed on the notebook will be lost.
I hope this helps.
Maliha (I don't work for lenovo)
ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
IdeaPad: U350
Apple:- Macbook Air [Snow Leopard]
Did someone help you today? Compliment them with a Kudos!
Was your question answered today? Mark it as an Accepted Solution!
Lenovo Deutsche Community Lenovo Comunidad en Español
Visit my YouTube Channel

How to use Rescue and Recovery on a T43

Hello All-
Ok, this is probably a lame question, so please bear with me...
I have become infected with a nasty virus that has left me unable to load Windows. I am able to access Rescue and Recovery.
If I "rescue all the files that have been created or changed from my last backup", will that include the virus?
All I really need is "My Documents", but it sure would be convenient to have everything else, too.
I am embarrased to say that I have never fully backed up my system.
What's the best way to recover my system?
Thanks so much!
Danielle

Hi Danielle,
Consider this allegory; factory settings will make your thinkpad like a never driven 0 meter car [with reference to software]. Hence it will be far-flung from it's previous state. Apart from what you have already saved on memory stick, all settings and the software you have installed on the notebook will be lost.
I hope this helps.
Maliha (I don't work for lenovo)
ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
IdeaPad: U350
Apple:- Macbook Air [Snow Leopard]
Did someone help you today? Compliment them with a Kudos!
Was your question answered today? Mark it as an Accepted Solution!
Lenovo Deutsche Community Lenovo Comunidad en Español
Visit my YouTube Channel

How to start Rescue and Recovery?

How do you start Rescue and Recovery? I used to just press the Lenovo Care button and it came up. But now... there is a Startup Interrupt Menu. When the computer already booted, it won't allow me to start the thing up. All it says is that changing it could be bad and you shouldn't change it.

probably you have changed drive D of the system that is the hidden partition on the hard disk and is dependant to the lenovo onekey cause this is a part of D partition,and some patitioning and formatting may affect on this hidden partition and it causes to deformes lenovo rescue system.

How to create HUs and input SNs for a Inbound Delivery by BDC or Function?

I need to create HUs and input SNs for Inbound Delivery Order as VL32N.
At first, I create a BDC program using T-code VL32N, it does work for a few HUs in one Order, but when there are more than 5 HUs in one order, the later can't be input by this program, because the table control of HUs only display 5 records in my screen, so it need page down during BDC process, while in Ttl content, there 16 rows displayed, it need page down after 8 records. But different user have different screen size, so my program doesn't work for all user.
What should we do for turn page in BDC program?
OR
Is there any function can be used for creating HUs and input SNs for Inbound Delivery?

How did you solve this issue, Can you give me some clue?
Regards,
Mohan

HOW TO CREATE INVOICES AND BOOK RECEIPTS FOR THE SERVICE CUSTOMERS

whenever a customer approaches our Customer Service Officer he create a
customer account from "Contact Centre" but he does not check "Create account"
checkbox so the client is not created as customer in Oracle Receivables.
How to create invoices and receipts for service customers whose reciprocal
accounts are not created in Oracle Receivables?
Regards
Ahmad Bilal
Message was edited by:
user531507

I am on EP7.0 with NWDS 7.0 SP8, i am getting the exact same error though my Webservices are hosted on PI 7.1 ESR. Where to define the logical destinations of the WSDLs.

How to create rescue and recovery partition for my thinkpad edge 11

Similar Messages

Maybe you are looking for