How to create RFC Destination Between ECC 6.0 and BI 7.0

HI,
My name is balu working in gucons,i was trying to create RFC between ECC 6.0 and BI 7.0,i have tried with the help of some documents but iam unable to do that,Iam very helpfull if you give a clear description regarding this problem.
Thank you,
Regards,
BALU.

Hi Balu
the error screen is from your BI system? If yes, then why the source system is showing to be of type BI? For ECC it should be of type r/3.
You can try to delete already created RFC from both your BI and ECC system and try to create source system connection from your BI end from RSA1>> Source System> right click..Create..
Choose "Automatically Create SAP system" . Enter the required credential then click on "Replicate as well"
If you do not want to delete any RFC for any reason please upload entries from RSBASIDOC, RSLOGSYST table.

Similar Messages

How to create RFC Destination without using SM59?

Hello all:
We are troubleshooting an issue. An user created a RFC destination. He claims that he did not use SM59. We checked his access and do not have SM59 in his roles.
He configured VIRSA FireFighter. During the configuration, he created RFC destination. Document says use SM59 or contact BASIS Admin. He claims that he used a config table and he don't remember the config table name. RFC screen shows his ID as creator of the RFC.
We are trying to understand how an RFC can be created (outside of SM59) and plug the security hole in the environment.
Any insights would be appreciated.
--Anand

The FireFighter solution changes the RFC destination of the service user "on the fly" without S_TCODE checks for 'SM59'. But if I can remember correctly when looking into this, it does not create the RFC destination (in SM59) "on the fly".
> He claims that he used a config table and he don't remember the config table name.
Theoretically this is possible - a config table to define the name of the destination, and then create it if it does not exist yet (when used).
Otherwise, see SAP note 587410 and restrict (remove) his authority for the test environment (concentrate on S_DEVELOP, not S_TCODE - as you have also experienced).
Cheers,
Julius

How to create a relationsship between a DB Bock and Non DB Block

Hi All,
I am working with oracle forms 10g.
I have created a Custom form. I have two block. One is a DB Block and another is control block(ie multi record blk).
I tried to create a master detail relationship between these two block.
Master block:LC_Master_BLK(DB Block).
Detail block: LC_Detail_blk(Non DB Block).
Form object navigator I click relation in Master Block and a pop up window opens and form there i select Detail block.
And i give the join condition like
LC_Master_BLK.PO_HEADER_ID=LC_Detail_blk.PO_HEADER_ID.
I have made po_header_id as primary key in my custom table,refred in my master block.
But it shows error as
FRM-15004: Error while parsing the join condtion.
Can any one tell me how to solve this.
Thanks & Regards
Srikkanth

Hi Srikkanth.M
I have two block. One is a DB Block and another is control block(ie multi record blk).this is what i call bad form design pls exchange the two blocks making ...
Master block:LC_Master_BLK(Non DB Block).
Detail block: LC_Detail_blk (DB Block).
Now to link the 2 blocks then define the join condition as follows:
:LC_Master_BLK.PO_HEADER_ID = :LC_Detail_blk.PO_HEADER_IDPls Keep in mind that the join condition specifies the relationship between items in 2 blocks db
or
one which is the master Non DB Block (to filter the display of data through user input to display the result output of data related in multi-records in the detail block.
That how u can works with the relation between two blocks as urs..
Hope this helps...
Regards,
Amatu Allah

Best practice for creating RFC destination entries for 3rd parties(Biztalk)

Hi,
We are on SAP ECC 6 and we have been creating multiple RFC destination entries for the external 3rd party applications such as Biz-talk and others using TCP/IP connection type and sharing the programid.
The RFC connections with IDOC as data flow have been made using Synchronous mode for time critical ones(few) and majority through asynchronous mode for others. The RFC destination entries have been created for many interfaces which have unique RFC destinations with its corresponding ports defined in SAP.
We have both inbound and outbound connectivity.with the large number of RFC destinations being added we wanted to review the same. We wanted to check with others who had encountered similar situation and were keen to learn their experiences.
We also wanted to know if there are any best practices to optimise on number of RFC destinations.
Here were a few suggestions we had in mind to tackle the same.
1. Create unique RFC destinations for every port defined in SAP for external applications as Biztalk for as many connections. ( This would mean one for inbound, one for outbound)
2. Create one single RFC destination entry for the external host/application and the external application receiving the idoc control record to interpret what action to perform at its end.
3. Create RFC destinations based on the modules it links with such as materials management, sales and distribution, warehouse management. This would ensure we can limit the number of RFC to be created and make it simple to understand the flow of data.
I have done checks on SAP best practices website, sap oss notes and help pages but could not get specific information I was after.
I do understand we can have as unlimited number of RFC destinations and maximum connections using appropriate profile parameters for gateway, RFC, client connections, additional app servers.
I would appreciate if you can suggest the best architecture or practice to achieve RFC destinations in an optimized manner.
Thanks in advance
Sam

Not easy to give a perfect answer
1. Create unique RFC destinations for every port defined in SAP for external applications as Biztalk for as many connections. ( This would mean one for inbound, one for outbound)
-> be careful if you have multi cllients ( for example in acceptance) RFC's are client independ but ports are not! you could run in to trouble
2. Create one single RFC destination entry for the external host/application and the external application receiving the idoc control record to interpret what action to perform at its end.
-> could be the best solution... its easier to create partner profiles and the control record will contain the correct partner.
3. Create RFC destinations based on the modules it links with such as materials management, sales and distribution, warehouse management. This would ensure we can limit the number of RFC to be created and make it simple to understand the flow of data.
-> consider this option 2.
We send to you messagebroker with 1 RFC destination , sending multiple idoctypes, different partners , different ports.

Http RFC destination for ECC to PI Connection Error

Hi,
While doing the proxy runtime configuration http RFC destination for ECC to PI .
I configure the RFC destination as below ---
Target Host -- PI Host
Service No -- 50000
Path Prefix --- /sap/XI/engine/?type=entry
Login Security Details
User Id -- PI user id
Password --- PI password
While doing the Connection Test , I got the error "ICM_HTTP_CONNECTION_FAILED"
I checked T-code in ECC system SMICM and ICM is in green status and I checked the services are activated in SICF transaction.
Please let me know how to resolve this issue.
regards,
Rohit

Hi Rahul,
I checked all service are activated in SMICM and I configured the FQDN also.
Now I cofigured the Service No --- 8000(http port no of PI) instead of 50000(J2EEport no of )
Target Host --- hostname
and did a Connection test...then I am getting a status as "http reponse 500" and status text as "empty http request received".
pls let me know is it correct configured or not.
regards,
Rohit

Getting problem when creating RFC Destination on XI system

hi,
I m trying to create RFC Destination on XI system using sm59 tcode. In technical setting tab at Target Host field, i gave SAP ECC server IP address. and in Logon Tab I gave Login parameters for SAP ECC server (Client 400, User : 05 & Password for user 05). Current user and Unencrypted Password fields are unchecked. also Logon Scree is also unchecked in Security Option.
Problem is, when i click on Remote logon tab, It shows me Logon screen with client 000, User : 04 (which is XI system's user name) and Password. so it doesn't take given login setting for ECC system and if i tried this thing more than 3 times, ECC server block my pwd.
Please suggest me the required solution
Thanks & Regards
Ritesh

Hi ritesh
First check if the user exists in ths system. Check the password especially. Because the password space (Number of characters)in SM59 screen is more than password character in SU01 screen.Check the password.
Secondly, Check if you have given the proper client in the destination box of SM59.
Check for the unicode test also.
If possible change the user type as service user.
When everything is perfect am sure the rfc connection should be fine...

Creating RFC Destination For UNICODE system From NON-UNICODE system

hi
how can i create RFC Destination For UNICODE system( XI ) From NON-UNICODE (R/3) system.
thanks and regards
Mithlesh Kumar Jha

Hi,
Check these blogs , Hope u would be getting some idea
<b>/people/thomas.jung3/blog/2004/06/24/bsp-150-a-developer146s-journal-part-v-xml-for-rfcs
/people/thomas.jung3/blog/2004/11/15/bsp-150-a-developer146s-journal-part-xiii-developing-abap-webservices
/people/sap.user72/blog/2004/06/19/how-i-started-with-sap-web-development</b>
Regards,
Sridhar Reddy

Create RFC destination

HI,
I want to build RFC destination between 2 ABAP system ,
i need step by step solution ?
Regards

Hi,
1)Log on to ABAP system.
2) Goto T-code SM59.(For Creating RFc destination)
3)Different connection types will appear select for ABAP CONNECTION
4)Click on Create button from top.
5)Give the name of RFC destination------ex:ZR/3TOBW
6)Connection type -
3
7)Short Description
8)Click on Technical Settings Tab and maintain the Host name and system number of another ABAP System.
9)Click on Logon&Security Tab Provide the log on Credentials of another ABAP system
10)click on save.
11)Click on Connection Test Button.
12)Click on Remote logon.
after that you will be connecting to the another ABAP system Remotely.(If and only if the Technical Settings which you provide are correct We can connect to other ABAP system)
If any error occur's please check your Technical settings and also Logon&Secirity which you provide.
Thanks.

How to create the relationship between ESSBASE 11 and DM in OBIEE11

Hi Experts,
I have one requirement that there is one property table named 'Store Master' in DW,and it contains a lot of attribute, such as Open Date, Close Date, IS 24 Hour etc.
But another data source is essbase and based on this source, I create all reports.
In ESSBASE, it has one dimension and hierarchy Location, and it has four level, Country(L1),Region (L2),Province(L3),Store(L4)
So I want to know how to create the relationship between Location (ESSBASE) and Store Master (DM).
I try to create one relationship in physical layer between Gen4,Location and Store, then drag the open date and close date into Location Dimension in BMM,then Presentation Layer.
When I drag column 'Open Date' ,'Gen4,Location ' and 'Sales' into reports, it will generate the following error message:
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 14020] None of the fact tables are compatible with the query request Dim Region.Store Open Date. (HY000)
However, when I remove the column 'Open Date'. it will be ok.
So what I missing the steps? Please help me. Thanks.

>
'2. Now, pull the 'Store' column from relational DB onto the Gen5, Location column from Essbase. This action now creates, two logical sources for your 'Store' column.'
If the length from different data source is not same,such as 1001(DM),L_1001(ESSBASE), can I drag the 'Store' column from relational DB onto the Gen5, Location column from Essbase?
I think it does not work.Right?Hi,
I am not sure if you are talking about the length(as in varchar(128)) of the member value being different in different sources, or the member itself is different in both the sources.
I am still assuming, that you are referring to the members not same in both the sources.If it is, the whole concept of federation is based on conforming dimensions. So, it needs that the same dimension information is present in both the sources and then only, you know we can analyze the numbers based on this dimension. So, either the dimension being different in both sources, or the members not present in both the dimensions might lead to incorrect numbers.
So I select Store Attributes in relation DB and Location in ESSBASE in physical layer, then create the physical join, such as right("Hour Sales"."H_Sales".""."H_Sales"."Gen6,Location",4) = "Authorization".""."EDW"."T_EDW_MDM_STORE"."US_CODE", then drag the OPEN_DATE and CLOSE_DATE in relation DB to Location in ESSBASE in BMM,finially drag them into presentation layer.We create physical layer relationships, to send over the same relation to the underlying database during querying. So, creating a physical relationship between essbase cube and relation database would not help here.
When you set up this federation, BI Server sends individual queries to each source and maps the conforming dimension members internally.
Hope I was clear, and this helps.
Thank you,
Dhar

How to create the relationship between ESSBASE 11 and DM in OBIEE 11G?

Hi Experts,
I have one requirement that there is one property table named 'Store Master' in DW,and it contains a lot of attribute, such as Open Date, Close Date, IS 24 Hour etc.
But another data source is essbase and based on this source, I create all reports.
In ESSBASE, it has one dimension and hierarchy Location, and it has four level, Country(L1),Region (L2),Province(L3),Store(L4)
So I want to know how to create the relationship between Location (ESSBASE) and Store Master (DM).
I try to create one relationship in physical layer between Gen4,Location and Store, then drag the open date and close date into Location Dimension in BMM,then Presentation Layer.
When I drag column 'Open Date' ,'Gen4,Location ' and 'Sales' into reports, it will generate the following error message:
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 14020] None of the fact tables are compatible with the query request Dim Region.Store Open Date. (HY000)
However, when I remove the column 'Open Date'. it will be ok
So what I missing the steps? Please help me. Thanks.

>
'2. Now, pull the 'Store' column from relational DB onto the Gen5, Location column from Essbase. This action now creates, two logical sources for your 'Store' column.'
If the length from different data source is not same,such as 1001(DM),L_1001(ESSBASE), can I drag the 'Store' column from relational DB onto the Gen5, Location column from Essbase?
I think it does not work.Right?Hi,
I am not sure if you are talking about the length(as in varchar(128)) of the member value being different in different sources, or the member itself is different in both the sources.
I am still assuming, that you are referring to the members not same in both the sources.If it is, the whole concept of federation is based on conforming dimensions. So, it needs that the same dimension information is present in both the sources and then only, you know we can analyze the numbers based on this dimension. So, either the dimension being different in both sources, or the members not present in both the dimensions might lead to incorrect numbers.
So I select Store Attributes in relation DB and Location in ESSBASE in physical layer, then create the physical join, such as right("Hour Sales"."H_Sales".""."H_Sales"."Gen6,Location",4) = "Authorization".""."EDW"."T_EDW_MDM_STORE"."US_CODE", then drag the OPEN_DATE and CLOSE_DATE in relation DB to Location in ESSBASE in BMM,finially drag them into presentation layer.We create physical layer relationships, to send over the same relation to the underlying database during querying. So, creating a physical relationship between essbase cube and relation database would not help here.
When you set up this federation, BI Server sends individual queries to each source and maps the conforming dimension members internally.
Hope I was clear, and this helps.
Thank you,
Dhar

How to create a package in ECC 6.0.

Hi,
Can you tell me how to create a package in ECC 6.0 system?
Thanks in advance,
Regards,
Arnab.

Hi,
Thank you for your replies.
Can you tell me the difference and uses of the two types of package I can create from SE21.
i.e. : Package and package interface. any sap link would also be helpful. I need to know where i can use what and what would be helpful for my case.
Regards,
Arnab.

How to create a link between 2 cells in different spreadsheets?

when using numbers on MacBook Pro/IOS X - how to create a link between 2 cells in different spreadsheets?

In the cell where you want the duplicate data to appear from another sheet/table do the following:
type the equal sign ("=") then click the cell you in the sheet table while contents you want to appear in the cell where you just typed the equal sign"
it reads "The cell I click equals the result of the formula or the contents of the next cell I click"

How we create RFC in SAP R/3

Hi all.
I want to create a iview and when i click on preview or Deploy, it shoud display screen of Transcation SE11.
I think we can do this by creating RFC of transcation(SE11). So Please tell me-
How we create RFC in SAP R/3 for transcation SE11.
I will rewards u points.
Thanks in advance
waiting---
Naresh Kumar

Hi Naresh,
there is better way, you can display an transaction in the portal with an iView. Then use this URL of the transaction, then you can insert a html view with the URL of the transaction.
You can add tabs with different transactions for example.
Best Regards,
Marcel

RFC - XI - WEBSERVICES scenario - Where to create RFC Destination

Hi Experts
For my RFC - XI - WEBSERVICES scenario, I have to create one TCP/IP RFC destination on R/3 system with the following details
RFC Destination Name    : XXXX
Connection Type            : T (TCP/IP)
Activation Type              : u201CRegistered Server Programu201D
Program ID                      : YYYY
Gateway Host                : R/3 Details ..??
Gateway Service           : R/3 Details ..??
My Function Module (Remote-Enabled) - u201CZZZZu201D is defined in R/3 System.
This Function Module should be communicated with the target system i.e. NW XI system
As per the Note from SAP Help: To be able to communicate using RFC, you need to define the target systems as RFC destinations in the sending system(R/3)
Target system u2013 XI Server
Sending system u2013 R/3 System
Are my details provided are good enough as per my explanation? Please guide me in this regard.
QUESTION : Where exactly do I need to create the RFC Destination(SM59)? on R/3 side or on XI side?

Refer the following link-
http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3414700)ID1636235450DB01012070359836134304End?blog=/pub/wlg/1438
what are the inputs should be given to Gateway Host and Gateway Service while creating RFC Destination??
Open transaction SMGW on the R/3 system and choose
Goto -> Parameters -> Display. Beneath Attributes there will be the
entries 'gateway hostname' and 'gateway service'.#

How to create watch points in ECC 6.0

Hi Experts,
How to create watch points in ECC 6.0
Thanks.

Dear Kalyan,
The moment the debugger starts, there will be an icon for "Watchpoint" exactly after F5, F6, F7, F8 and a big STOP red button on the application tool bar. Once you click on that Watchpoint button, it will take you to the screen where you need to define the exact field and its relative operator along with the condition to be checked.
Hope this is clear. No navigation needed for this.
-Syed.

How to create RFC Destination Between ECC 6.0 and BI 7.0

Similar Messages

Maybe you are looking for