How To Create Ringtones for My iPhone 4
I would like to create ringtones for my iPhone 4. Any information will help.
See http://osxdaily.com/2012/08/18/convert-any-audio-or-video-to-iphone-ringtone-eas ily/ or watch the video here: Create free ringtones with iTunes 10. In iTunes 11, go to View>Show Sidebar in order to follow along with the video.
Similar Messages
-
How can i set a song from my music library to a ringtone for my iphone 4s
how can i set a song from my music library to a ringtone for my iphone 4s?
The procedure is the following:-
*right click the song on itunes and click get info.
*under the option, check in the start time and end time- This is the exactly which part of the song you want to make your ringtone.
*Click Ok.
* Again right click in the same song and click the CREATE AAC VERSION
* Now you can see the same two song. if you have made the short length in step 2, lenght will be different.and this will be in (.m4a) format. and if you dont see on itunes you can search the name on finder. you will find both files.
* Now you try to change the format (.m4a) to (.m4r), you just delete a and add r and press enter bottom. and conform it.
*Now you add this files to the ringtone/tones on itunes which is located on the left side bar of itunes.
*make sure under the preference of your itunes under the general the tones section is checked in.
*go to your device on itunes. Under the tones check in sync tones. You can Sync all tones or the particular tones which you want.
*Now this tone is on your iphone. You can change your ringtone through setting>sound>ringtone and choose the particular one. -
HT4427 how do I use a song from iTunes as the ringtone for my iPhone 5?
how do I use a song from iTunes as the ringtone for my iPhone 5?
Google will find several free ways to create ringtones for iphone.
-
Can't create Ringtone for iPhone
everytime I click on the ringtone symbol next to the song I want, it says that I need to accept the iTunes Store Terms of Service and that by clicking 'OK' it will direct me to that. Thing is, I've already accepted that and when I click OK, it does nothing. It's becoming a real pain..any ideas?
I sent iTunes support a note about that and although they didn't answer my question directly, they got me around it. For what's worth, it did work; however, now I have a new problem. Long story short, don't create more than one ring tone for now. I'll post my crap about that momentarily...
Here's what they wrote:
First I want you to try to create a ringtone with the following steps:
1) If you haven't already, upgrade to the latest version of iTunes, which is available free of charge on the iTunes website:
http://www.itunes.com/download
2) Open iTunes, access the iTunes Store, and look at a few songs. A bell icon next to a song indicates that you can make a ringtone from the song. The bell icon does not mean that the song itself is a ringtone. If you do not see any bell icons, choose View > View Options, select the Ringtone checkbox, and click OK. A ringtone column will appear and any eligible songs will have bells next to them. Purchase any ringtone-eligible song you like.
3) Now click Purchased in the list on the left. If you do not see any bell icons, choose View > View Options, select the Ringtone checkbox, and click OK.
4) Click the bell next to a song to begin making a ringtone. The ringtone editor will appear at the bottom of the iTunes window.
5) Adjust the highlighted area to choose the part of the song (up to 30 seconds) you want to use as your ringtone. You can also choose to fade in or out the audio by clicking the checkboxes in the highlighted area.
6) Select a "Looping" length, which will set the gap between each ring. Click Preview to hear your ringtone before purchasing. Once you're satisfied with your ringtone, click Buy. Your iTunes Store account will be charged 99 cents plus any applicable taxes. Any song credits or video credits that may be on your account will not be used toward the purchase.
7) Your ringtone will appear in your iTunes library Ringtones playlist on the left side of the iTunes window.
8) To sync the ringtone to your iPhone, connect your iPhone to your computer. In iTunes, select your iPhone on the left and click Sync. iTunes will automatically sync any ringtones you create. To sync specific ringtones, with the iPhone selected on the left, click the Ringtones tab, choose Selected ringtones, and click Apply. Check the ringtones you want to sync and click Sync.
Please note that any ringtones you have previously synced to your iPhone will be replaced with the ringtones that you are currently syncing from your authorized iTunes library.
To set a ringtone as your default ringtone, go to the Home screen on your iPhone. Tap the Settings icon, then tap Sounds. Tap Ringtone, then choose a ringtone. This will become your default ringtone.
To assign a ringtone to a specific contact, go to the Home screen on your iPhone. Tap the the Phone icon, then go to your Contacts. Choose a contact, then tap Ringtone and choose the ringtone. When that contact calls, you will hear that ringtone.
Please note that iTunes creates ringtones for iPhone only, and the ringtones you create with your iTunes Store account may not be transferred to other accounts. Also note that even if you create a ringtone from iTunes Plus (DRM-free) content, the purchased ringtone will include DRM-protection.
To learn more about ringtones, please see:
How to Create and Buy a Ringtone for your iPhone
http://www.info.apple.com/kbnum/n306373
iPhone Ringtones FAQ
http://www.info.apple.com/kbnum/n306374 -
Can I use the Garageband app for iPad to create a new ringtone for my iPhone 4?
I want to create new ringtones for my iPhone, and consulting Support, they explain how to do that using Garageband 9.0, but I want to know if the Garageband app for iPad can be used to do the same thing or not. The iPad uses iOS 4.3.3.
Would you be composing the ringtone in garageband or taking existing material and editing it? You could create something but then you would have to send to iTunes and format it as a ringtone there I believe
-
Hello,
I created a ringtone for an iphone and cannot get it to the ringtones on the phone. IF this is a Garageband issue can someone please help?
I created the file and saved to my desktop. (The phone I want the ringtone on is not my phone so I could not "share" with my itunes) I was able to send this file to the person that needs it and was able to download to their itunes. I then was able to move it to the iphone ringtones on the phone when it is sync'd to itunes. But, when I go looking for it on the phone, I can only find it on the ipod part of phone.
Did i do something wrong in Garageband or do I need to take this to iphone forum?
Thanks
JimYou don't need to move it to the iphone ringtones , you can directly Click "Share" on the menu bar and select "Send Ringtone to iTunes".
More information about "Make Ringtone for iPhone with GarageBand on Mac"
Message was edited by: LynnLU -
How to create folders for SMS in iPhone 4?
Hi,
How to create folders for SMS in iPhone 4?
Is there a way to create folders for SMSs in iPhone 4?
Thanks & regards,
Afreensorry about that..Where do i find the replies to my posts? tks
-
How to download ringtones on the iphone
does anyone know of a good site or how i can download ringtones for my iphone... i cannot figure it out...
The User Guide is always a good place to start to find out how to do anything with an iPhone. See page 162:
http://manuals.info.apple.com/enUS/iPhone_UserGuide.pdf
Also see this web page:
http://www.ehow.com/how2160460custom-iphone-ringtones-free.html -
How to create ringingtone into my iPhone using macbook?
pls teach me how to create ringingtone into my iphone using macbook...
Have you installed iOS 5 on your iPhone 3GS?
If not - then connect it to iTunes, and prepare yourself for a very big download!
It will give step by step instructions once iOS 5 is installed.
Cheers,
Rodney -
Creating Pages for an iPhone in InDesign
I'm creating pages for an iPhone using InDesign CC 2014 on Windows 7 (64 bit) and need to simulate in on a PC, but how?
In Windows, you have to use OTF fonts(Compatible for Win and Mac), Then you can create pages. Then only Iphone supports to open.
-
How to create piano UI in Iphone?
0 vote down
star
Hi,
I am newbei in creating such piano based UI application. I am developing an application in which i have to use Piano.
How to create piano UI in Iphone?
How to create it using Interface builder ? or is there any other way to create the piano?
I am in urgent need to create such UI,If any body has any solution or any useful code or any Link,which would be appreciated.
Thanks,
NirajThanks for guided me.
I will post this question in developer's forum. -
Please help with downloading with syncing ringtones for my iphone.
I just bought my first iPhone and am so confused. I am having trouble making ringtones for my Iphone. I have some I have purchesed from itunes and some from Myxer.com. The ringtones are in my ringtone folder but won't sync to my phone. I have changed the format to ACC, but I don't now how to go any further than that. Can anyone help?
first of all you should not have changed the format to aac they must be in the ringtone format your bought them in (i assume from itunes?)
second, sync your iphone and under the ringtones tab, make sure the box is ticked to sync all ringtones. then sync iphone again. this should work.
but they must be in the m4r format or they wont work.
hope this helps
by the way, you dont need to buy ringtones from itunes, google is your friend, they are ways to get free ringtones out of your music in itunes. one method is to use itunes its self! google is your friend -
Create ringtones for I-Phone 5
I have been told 'Myxer' and 'Ventones' are really easy and useful (and free!) to create ringtone for the I-Phone from your own I-Tunes library? I have tried 'Myxer' and for the life of me, I can access the ringtone I appear to have created via "Apps" on the device screen but cannot get it into my ringtones folder ? Has anyone experienced a similar problem and overcome it? Is Ventones any better/easier? Regards Tony
download this app http://itunes.apple.com/us/app/ringtone-designer-create-unlimited/id382373458?mt =8
I use this one, it also have a youtube videos showing you how to sync your ringtones with itunes. -
How to get ringtones for texts
how to make ringtones for text?
You can't. This is not a current feature of the iPhone. Likely will be this "fall" when iOS 5 is released.
-
How to create transaction for a maintenance view, Thank you.
How to create transaction for a maintenance view,
Thank you.
deniz...Hi Deniz,
Go to se93.
Then create the new T.code.
Under that select parameter Transaction.
Then give the sm30 in the t.code in default values tab.
check the checkbox skip initial screen.
in classification tab.
click checkbox inherit gui attributes..
Now below..
In the default values..
select
viewname and give ur table name.
UPDATE= Xsave
view - table name ( Should be upper case
update X ( should be upper case).
http://www.sap-basis-abap.com/sapbs011.htm
Hope this helps you.
Regards,
Viveks
Maybe you are looking for
-
Issue with use of shared variables in Crystal Reports 2008 Offline Viewer
Hi, I have a report that contains a number of sub-reports which include drill-down functionality. The report returns data relating to an individual team with the user being able to view top level summary information in each area from the parent repor
-
How to get a copied transaction from MIR4 only to display??
hi all, we have two transactions named ZZMIR4 and ZZZMIR4. Both are copies from MIR4, but the first one is for modifications and the other one is only to display.... I use two registers in T169 to get this...ZZMIR4 has T169-TRTYP = 'V' so we can chan
-
Webi rich client and Infoview difference
I am quite new to BO. Plz tell me what is difference between webi Rich client and Webi (i.e infoview?) Thanks and regards.
-
How to implement Captcha using Web Dynpro Java
Hi Experts, Can you please provide any information on CaptchaImplementation using Web Dynpro Java. We are using NWDS 7.01. Regards, Suvankar
-
Error in PeopleTools 8.48 while calling CI based Web Services from BPEL
Hi All, I am working with a CI based web serives and using the PeopleSoft generated wsdl file while calling from a BPEL process. When I am using the same component in PeopleTools 8.47, it's working fine. But the same is NOT working when I'm using Peo