How to create rule based on Reply-To address

Hi, I'm just switching to mac from ubuntu in my workplace.
I received two mailing lists, any mail have the same Reply-To: header for each mailing list.
It's possible to automatically move that mail to another mail folder in Thunderbird, by using rule with Reply-To: address.
I looked for that header in Apple Mail rule, but failed to find. Is there any way to move mails of mailing list automatically?

Thanks for replying.
Unfortunately, that did not work.
I'm using OS with my own language setting, Korean, and the mail program show the major headers like From: , To:, Subject:, Reply-To: and so on. I tried to use "edit header.." with the original name, Reply-To, and the Korean translation, but neither worked.
Anyway, I found other solution. gmail server could filter the messages by searching specific header name and values for the mailing list. I wiped out the rules in Apple Mail client, and add filter rule in gmail server.

Similar Messages

Job Chain. How to create Rule based on Time also?

Hi ,
I need to check at 9:30 AM that one of the previous step in the existing chain has been completed.
If not I'd like to do some 'send_notification' Step.
So, I need to create rule based on Time and 'step_n succeeded'.
Could you please tell me how to do that?
Thanks for your help,
LSY.

Hi,
Alberto is right in his approach. You can't say to evaluate the chains rules at 9:30am but you can set an evaluation context of 10 minutes so that the chains rules are reevaluated every 10 minutes.
Then you can create a rule that says
if the time is between 9:30am and 9:40am and step_to_check is running or not_started
then start send_notification_step
Hope this helps,
Ravi.

How to create Profile Based Rule in Endeca Studio Developer

Hi,
Can anybody tell me how to create Profile based rule in the Endeca Studio Developer. and how to fecth the data in the JSP. what are the parameter required to pass in the ENEQuery
Thanks
Shailesh

I use visual studio 2012.
I dont see rule set editor which can help me create busineesss rule.
Where can I find it?
Hi Rajesh,
If you want to learn more information about RuleSet Editor in .net framework 4.5, check out https://msdn.microsoft.com/en-us/library/ee960221(v=vs.110).aspx
for more information.
Best regards,
Angie
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to create Formula based value field in COPA

Hi,
I want to know how to create formula based value field in COPA
My Requirement is i want to collect some value in formula based value field and want to use in copa allocation cycle as a tracing
factor.
anybody give some light on the same topic or requirement ?
Thanks
Nilesh R

The key figure you are creating in KE2K is not a value field, i.e. you can't post to it and you can't use it in a report. It is a caluculated value that can be used only in assessment and top-down-distribution.
In Ke2K, enter a name for your key figure, then click on the the white sheet button to create it. Now the formular area is open for input. Input your formular (e.g. VV001 + VV002 - VV003 .... where VVXXX are the technical names of value fields).
Now click the "check formuar"-button. Then save.
Before you can use the key figure in assessment, execute TC KEUG.
Now the key figure is available as any value field in the tracing factor selection of your assessment cycle.
I hope this made it clearer.
Regards
Nikolas

How to create Rules with Flex Field mapping in the bpm worklist

I Have created a flex field label and was able to map to the flex field attributes .
But when i try to create a rules , I don't see the label or the flex attributes in the task payload .
Can someone please help is understanding how to create Rules with Flex Field mapping in the bpm worklist .
Even I am also searching for any scripts which will take the flex fields prompts and can directly create a label in the bpm worklist .
Any pointers or suggestion is highly appreciated .

Hi,
SE38 -> Enter program
Select Variants button and display. In the next screen, enter a variant name, (If not existing , press Create to create new one), else click on Change.
Now the selection screen will display with a button "Variant Attributes" at the top.
Click on that button.
In the next screen, go to the selection variable column of the date field. Press F4 or drop down and select 'D' for date maintenance.
In the column "Name of Variable (Input Only Using F4)" press F4 or drop down, select whichever kind of date calculation you want and save the variant.
Now whenever you run the prgrm with this variant, date will be displayed by default.
Regards,
Subramanian

How to Create Rule in Interface Data Transformer.

Hi,
If any one know how to Create Rule in Interface Data Transformer(IDT) Super user by using Lookup(Oracle R12 Version) Please help me on this.
I have one value in GL Interface table, while loding data into base tables (GL_JE_BATCHES, GL_JE_HEADERS, GL_JE_LINES) that values replace with another value.
For that purpose we have to use Interface Data Transformer.
If any one how to create rule in IDT, Please give me a example how to create rule by using Lookup.
Thanks in Advance.
Regards
Varma.

Hi;
Please check below note which could be helpful for your issue:
Setup Checklist for the Interface Data Transformer - Global Consolidations System [ID 277875.1]
Regard
Helios

How to create HeatMap based on Country Credit Rating?

How to create Heatmap based on Country Credit Rating i....
Credit Ratings are AAA, -AAA, +AA, AA, -AA, +A, A, -A, +BBB, BBB, -BBB, +BB....... From Green To Red
Country Credit Rating
Angola
BB-
Botswana
A-
Burkina Faso
B
Ethiopia
B-
Ghana
B
Morocco
BBB-
Nigeria
BB-
Sierra Leone
B-
South Africa
BBB
Tanzania
B
Zambia
B+
Australia
AAA
India
BBB-
Indonesia
BB+
Pakistan
B
Philippines
BBB
Thailand
BBB+
Uzbekistan
BBB
Turkey
BB+
Chile
AA-

Thanks Jim for the solution.
Also, this article should be helpful for you:
Create a Heat Map Using Excel’s Conditional Formatting -
http://peltiertech.com/heat-map-excel-conditional-formatting/
(Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee
the accuracy of this information.
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.
Hi Ethan, If you trying to get points i understand but please do assume that googling is done first.
If you want to get help from others, you should first be polite to those who are trying to help you, rather than "i already new the option of converting to numbers" or "If you trying to get points i understand but please do assume
that googling is done first.".
You didn't make it clear in your initial post that what you already tried, or which articles you already reviewed, how should us people know this?
I'm sorry but here all is asked politely and please, politely do not change the subject.

HOW TO CREATE PROMPT BASED ON ANOTHER PROMPT IN OBIEE

HOW TO CREATE PROMPT BASED ON ANOTHER PROMPT IN OBIEE.
Requiremenst is as follows.
Year ,Qtr columns in first prompt.Based on selection on these prompts second prompt should display corresponding prompts
Second prompt will have Month ,Week and Day columns.Second prompt should be hidden and based on first prompt selection second prompt should display with constraint based on first prompt.
Any help would be highly appriciated!!!

hi,
Using Guided navigation it is possible,
Please refer the below links.
http://gerardnico.com/wiki/dat/obiee/dashboard_prompt_1_eq_0
http://businessdecisionsystems.com/blog/?p=448
Hope this help's
Thanks,
Satya

How to create ajax based tabs ..??

Hi all,
How to create Ajax based Tabs (or Tab like) in a JSF page..?
Any clues..?
Thanks and regards,
Jijo

You need to write your own jsf component for this.

How to create event based process chains

Hi All,
I would like to know about event based process chains. In connection to this, could you please answer the following queries,
1. How to create events
2. How to link created event to the process chain in the same BI or BW system and as well as from
    externel BI system.
3. How link one process chain with other process chain (i.e, After completion of one process chain, it
    should trigger other dependent process chain)
Thanks and Regards,
Kotesh.

1). Doubt regarding first question.
For example, i would like to create time based event (it should be trigger daily at specified time),
where we have to maintain scheduling options while creating event.
When i checked SM62 there i found only two options a). Event name and b). Description.
Could please send any doucument link if you have.
Ans : You can use function modules like "BP_EVENT_RAISE" in a program and schedule the program to trigger.
2). For externel BIW system also same procedure we need to follow or any difference.
Ans : Externally you need to trigger the same event.
3). i found dependent process chain also had scheduling options as direct scheduling insted of start using meta chain or API. As you said dependent process chain should be mata chain. it seems dependent process chain may be Meta chain or Direct scheduilg.
Ans : Its your choice how you want to schedule it.You can either make that dependent chain a metachain or schedule it separately.
I found at the end of first process chain they kept one process like Raise event and second process chain connected with the help of raise event process event name. If you have any idea about this process could explain a bit more.
Ans : May be they are raising the event in the main chain and triggering the dependent chain using this event.
But Metachain is preferred for such thing.Though it does similar thing.
Hope this helps.

How to create rule/monitor to generate alert for a reboot of Linux (Redhat) server?

Need to receive an alert when a Linux server reboots. How can this rule/monitor be created?

You can use the "Shell Command" templates to create a UNIX/Linux Shell Command (Alert) rule. See the walkthrough and background here:
http://operatingquadrant.com/2012/01/30/opsmgr-2012-unixlinux-authoring-templates-shell-command/
The following command will identify the seconds the system has been "up" and return OK if it is greater than 15 minutes, and REBOOTED if the seconds up are less than 15 minutes. Your Shell Command rule should alert if the StdOut value contains
REBOOTED.
upseconds=`cat /proc/uptime |awk '{print int ($1 )}'`;if [ $upseconds -lt 900 ];then echo REBOOTED;else echo OK;fi
www.operatingquadrant.com

How to create file based on date value

Hi
Hope you'll help me. I can't find right way to tackle the problem. I need to read a file which name is created based on month and years' value. File name format is as follows: INMMYY.log. So to read it I must create File object using this file name format. I tried to use Calendar class get necessary information using get() method. Unfortunatelly returned month's value is always 2,3,4 and so on..(I need 02,03). There is problem with year's value als. It's returned in form YYYY but I need YY.
Does anybody have any idea how to create string INMMYY in the easiest way ??
Thanks in advance :)

Use java.text.SimpleDateFormat.

How to create rule for repoting soa server down state in OEM12c

Hi All,
I am very new to OEM 12c. I want to monitor my weblogic server from OEM 12c. I want to configure rule such that if any of the servers viz. Admin Server, soa server, bam server or osb server goes down it send a notification mail to the administrator. I am very new to OEM 12c. I have already configured the mail server in OEM12c. I need to j=know how to create a rule with the above mentioned condition. Please guide me !!!
Thanks in advance!!
Edited by: Roshni Shankar on Aug 9, 2012 12:06 AM

Hi Roshni,
For most MW targets including the WebLogic Server target, you can set the thresholds by going to the target drop-down (right above the main pane, you will see a "WebLogic Server" menu) and you can the navigate to "Monitoring" from the base menu items. From there, you will see "Metric and Collection Settings" which will take you to where you can set thresholds for the target.
You then can set notifications via your chosen mechanism. For more details, we have in-product documentation. The easiest way to find out more about thresholds, incidents, notifications, and other key features related to basic monitoring and alerting like metric templates, you can navigate to "Incident Management" off the "Enterprise" top-level menu item. There you will see incidents (i.e. metric alerts, policy violations) as well as a Getting Started guide at the bottom where you can learn more about these topics. You can also use the "Help" menu of course and look through the broader set of documentation that we offer both in the product and on OTN.
Cheers,
Glen

How to create Rule in workflow

Hi,
What is meant by rule and how to create it in a workflow....

Hi Nandha,
Check these links...
/people/mike.pokraka/blog/2005/07/17/sap-business-workflow-faq
http://help.sap.com/saphelp_erp2005/helpdata/en/fb/135962457311d189440000e829fbbd/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/c5/e4a930453d11d189430000e829fbbd/frameset.htm
Workflow
http://www.sap-img.com/workflow/sap-workflow.htm
http://help.sap.com/saphelp_47x200/helpdata/en/a5/172437130e0d09e10000009b38f839/frameset.htm
For examples on WorkFlow...check the below link..
http://help.sap.com/saphelp_47x200/helpdata/en/3d/6a9b3c874da309e10000000a114027/frameset.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PSWFL/PSWFL.pdf
http://help.sap.com/saphelp_47x200/helpdata/en/4a/dac507002f11d295340000e82dec10/frameset.htm
http://www.workflowing.com/id18.htm
http://www.e-workflow.org/
http://web.mit.edu/sapr3/dev/newdevstand.html
/people/mike.pokraka/blog/2005/07/17/sap-business-workflow-faq
Reward points if this Helps.
Manish

How to create Form based on a table to display multiple record

Hello All,
Would somebody please tell me how to create a Form based on a single table ,
to view and insert multi record based on a single table.In other words I would like
to have a form as shown below ,where the users can Insert,update,delete,query and so on
Item Id PArt Number List Price
100 Item-1 $120.oo
200 Item-2 $150.00
300 Item-3 $50.00
I know I can do it as Single Record block using Tabular Format,but multiple record ?????
Thanks in Anticipation
Babu

Try this method,
1. Creat a Master Detail Form (Custom Layout and not tabular)
and in the master block select one field.
2. In the HTML layout for master remove the reference for
that field(so that nothing will appear in the master block
of the form).
3. Before the update (in the Pl/SQL event handler select the 'Save' event and write the following code to avoid updating master block).
p_session.set_value(p_block_name => 'MASTER_BLOCK',
p_attribute_name => 'MASTER_ACTION',
p_value => 'None');
doSave;
For eg, let's say
Master is from 'Dept' table and Detail is from 'Emp' table(with join condition Dept.dept_id = Emp.dept_id). In the master remove everything except dept_id field and in the HTML layout for master remove the reference of the dept_id field(you cannot remove this field physically from the master layout). Now the form will look like multirow form rather than master detail form but only problem with this workaround is 'Detail Action' will be present in the detail block.
I hope this will help you.
Thanks
-Krishnamurthy

How to create rule based on Reply-To address

Similar Messages

Maybe you are looking for