How to create Sales Employee Without HR?

Dear all,
I checked the function of creating sales employee without HR but it only generate the two request only, but i cannot create the sales employee.
Can any plz send me the details for the same.
Thx & Regards,
PM

hello, friend.
try t-code VPE1 or PAL1. even without HR, you may have to define certain HR organizational units in Enterprise Structure (e.g. personnel areas and sub-areas).
regards.

Similar Messages

How to create sales employee without HR module

Dear Experts
IMGSDMASTER DATABUSINESS PARTNER-USE SALES EMPLOYEE WITHOUT HR
2. Define PErsonnel area (usually locations)
3. Define PErsonnel Subarea (bifurcations within loctions, may not exist but recommended to be maintained)
4. Define Employee Group ( usually Types of employment)
5. Define Employee sub group (usually used as grades)
6. Assign Employee sub groups to Employee groups
7. partner function part also i finish in sales order it shows fine
i already finish above steps and i already gone the more than 40 threads
but in t.code VPE1 system show the message
Choose an action type
can you please guide what steps i have to do further so i can create sales employee

hello, friend.
try t-code VPE1 or PAL1. even without HR, you may have to define certain HR organizational units in Enterprise Structure (e.g. personnel areas and sub-areas).
regards.

Fail to create sales employee without HR

Hi experts,
When creating sales employee, the error message below pops up. Actually, employee group Z & employee subgroup Z1 have been defined. Z1 has been assigned to Z.
Plz help solve. Many thanks.
"No entry in table T503 for Z Z1
Message no. PG301
Diagnosis
The input values must be stored in table T503. The value or values " Z Z1" are not in the table.
Procedure
Check that the entry is correct.
If necessary, notify systems administration so that the entry can be included in the table."
Edited by: Cathy on Jun 28, 2010 4:01 AM

Hope it is a HR config related error. Kindly check following links of understanding:
No entry in table T503
Re: No entry in table T503 for "D"
[facing T503 problem|http://www.sap-basis-abap.com/hr/sap-hr-questions.htm]
Links for Sales employee without HR:
Re: sales employee
How to get data from 3 ODS into 1 ODS?
Sales employee without HR
Thanks & Regards
JP

How to block sales employee without enter in sales order.

Dear Guru's,
I have created sales employee code 1234 and using same in sales order with using partner function due to the some reason now I donu2019t want to book sales for same employee code 1234. Can anyone help me how to block employee code.
Regads
dharma

hi
if i enter sales employee manually in sales order it should not allow me to enter and it should give message this employee in inactive status so that user will under stand accordingly.
this employee number we are entering in sales order manually it's not copying from customer.

Creation of sales employee without HR...?

Dear Gurus,
I have confusion in creating a sales employee without HR..
I need your suggestions and inputs on this issue..
Note-I have thoroughly searched all the forums before posting it here .I am abit confused now going through all those ..
In some forum suggested to use V+23 to create sales employee with PE partner function with account group: 0007 and some forums people are saying use PA30 OR VEP1?
Can you guide me which transaaction code i should use for sales employee creation.
For your valuable inputs will be reward and will great help for me.
Regards
Venkat

Hello,
You can create Sales Exployee with T-Codes VPE1 or PA30 only if you have implemented HR Module.
To create Sales Employee without HR, refer this IMG Link (& the F1 help there):
IMG - Sales and Distribution - Master Data - Business Partners - Use Sales Employee Without HR
Also refer the blow link for detailed information:
Sales employee without HR
Hope this helps,
Thanks,
Jignesh Mehta

Sales Employee without HR - Maintaining Address Details

Hi All,
We are using Sales Employee without HR.
When the Sales Employee is linked as a partner on a Sales Document, the address details are filled with "XXXX".
Example:
Name: Graham Shanks
Street: XXXXXX
Post Code: XXXX
City: XXXXXX
I want to be able to maintain the address, specifically the email address of the Sales Employee to setup an email output condition for the order confirmation.
Please assist.
Regards,
Tim Reid

Hi,
Once you create sales employee without HR,then go to t-code,
PAL3 or PA30
Select infotype text ADDRESS & click on create icon at TOP of leaft hand side
Maintain the address detail and save it.
My suggestion is take help of HR consultant, he will configure infotype for address.
Kapil
Edited by: Kapildev Farakte on Jan 6, 2010 5:17 AM
Edited by: Kapildev Farakte on Jan 6, 2010 5:17 AM

Sales employee without HR

Hello All,
we have a scenario to map the sales employee and pay the commision.this needs to mapped without HR module.
I could see a config in S&D->Master Data>Business Partner--->Use Sales Employee without HR.
has any used this function? Pls let me know how to use 'Use Sales Employee without HR' since there is no much information in IMG on this.
Thanks in adv
Shripad

HI
Use of Sales Employee in HR and SD
When you access this in the IMG it creates two transport requests to
transport the relevant HR tables from client 000. So I added these requests
to the buffer and imported the requests into the development client.
However, still when trying to access the funtion in the IMG it asks to
create two more requests. Does anyone know what steps I need to take to get
this to work. I don't know if I'm doing something wrong on the Basis side or
whether this is an HR/SD configuration question. Running the below mentioned
report just generates the same transport requests.
This is the help text on the subject.
Use Sales Employee Without HR
In order to use the sales employee, you need an HR master record. If you do
not use the Human Resources application component (HR), you can transport
the HR tables that you need for creating, changing or displaying a sales
employee from client 000 into the target client.
Note
In order to transport the required HR tables from client 000 into the target
client, you must have two transport requests. Report RPUTRL00 is called and
updates the Customizing and system tables in separate transport requests
Report RPUTRL00 only copies the standard SAP config.
You will need some basic HR config doing (switching off unnecessary fields,
payroll area's , etc.) which shouldn't take more than a couple of hours
Personnel area's (usually same as Company code)
Personnel sub area's
Employee Group and subgroup
Action L1 may need changing (if the standard doesn't suit your requirements)
0001 Organizational Assignment
0002 Personal Data
0006 Addresses
0900 Sales and Distribution Data
0105 Communication
If you let me have your email I'll send you a document that may help, HR
mini-master was setup for 6 countries, config & testing took 2 days / 18
hours. The doc doesn't say which fields we switched off but it should give
you some idea of what was done.
Message was edited by:
SHESAGIRI.G

How to maintain sales employee as a customer master

How to maintain sales employee as a customer master not like sales employee responsible for sales

Hi Prem,
For storing the sales employee details, we need an HR master record.
The controlling factor while maintaining Customer Master data is Account Group. Try creating a custom Account group and link the Sales Employee to it.
regards,
Raj

How to create Sales Quotation from project through DP81

Dear Guru's,
How to create Sales Quotation(VA22) from project through DP81, what all the customization settings are required for this functionality; please explain me all the step those are required for this process.
Regards,
Sai

Hi,
You can use DP81 and DP82 to create Quotations .
If you want to use DP81 then you need to link Sales Inquiry with Project by entering the WBS Element in Account Assignment Tab of Inquiry and also enter the DIP Profile in Sales B View.
Else you can carry sales pricing without the creation of Inquiry.Enter the DIP Profile ,Dist Channel,Division in control data tab of project and also enter Sold to party in Partner tab.
See SAP help for customisation of DIP Profile .
Muzamil

How to put Sales employee (Splcode) Mandatory Field, when adding A/R invoice

Hi,
Kindly solve, How to put Sales employee (Splcode) Mandatory Field, when adding A/R invoice.
Regards,
Rajeev.

Follow this step..
1. In SQL Server, go to the SAP B1 Database you're using.
2. then on the Object Explorer , go to Database Folder, explode the SAP DB->Programmability->Stored Procedures->SBO_SP_TransactionNotification * the only Stored Procedure that is allowed to be edited. Just right click and modify
3. Try to paste this -> and click F5
If
@object_type ='13' and @transaction_type in ('A','U')
Begin
If EXISTS
select DocEntry from ONIV
Where DocEntry = @list_of_cols_val_tab_del
and SlpCode<>'-1'
Begin
set @error_message = 'Please select the Sales Employee'
set @error = 1
END
END
Regards
Kennedy

How to create sales order Automatically with reference to contract?

how to create sales order automatically through batch or online? can anyone please suggest what needs to be change in SAPMV45A program?

Hi,
Wt am able to understand from the above question is, you want to create automatic sales order against contract on a day to day basis by doing batch program, hope am wright.
See you can do it in two ways.
1. By using BDC, in SHDB T code record how exactly you will do transaction and then give it to your abaper rest he will do. he will write a program and he will schedule that program every day night.
2. By using BAPI. Just check in there are many threads are there which gives sales order bapi. Tell your abaper to map that bapi and tell them to schedule back ground job.
Hope this will help out in solving your problem.
Regards,
Nagesh

How to create an account without a credit card

Does anyone know how to create an account without using a credit card?

Yes. Follow the instructions in this Apple support document.
Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card
B-rock

How to create own interface without .cpp file?

how to create own interface without using .cpp file ? To access the method inside the interface .
e.g. ILayoutTarget.
Should not be SDKFileHelper.h because they are using SDKFileHelper.cpp file

Rathan,
PLz chk the below link (PDF file)
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d23cbe11-0d01-0010-5287-873a22024f79?quicklink=index&overridelayout=true
Mutti

How to create sale order step by step

Hi all,
I am new in SAP SD and how to create sale order. Please give step by step guid for this please.
Thanks,
Suresh.

Please go through the forum rules. First you have to search the forum to find answers to your queries. If it is not there, then you can very well post the same.
thanks
G. Lakshmipathi

How to create new view without interlinking with gantt chart or resource views

ok clear
one another question
In msp how to create new view without interlinking with gantt chart or resource views

Hi Shiv PMC--
I splitted your question above in another thread in order not to have a huge thread with many topics in it.
That being said, I'm not sure to understand. A view is just a manner to display MS Project data with columns. A view can have a table with column (left part) associated with a Gantt chart. It can also just contain a table with no Gantt chart (like the task
table) or a table with a timephased grid (resource and task usage).
Please give us more information, maybe with a concrete example so we can help you.
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller |

How to create Sales Employee Without HR?

Similar Messages

Maybe you are looking for